Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Waterjet Mechanical Systems Support

Active

Federal

Response Deadline11/06/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Waterjet Mechanical Systems Support subcontract involves providing specialized mechanical engineering and technical maintenance for physical waterjet assemblies supporting the Naval Surface Warfare Center Philadelphia Division. The scope of work requires the inspection and maintenance of four waterjets per ship located external to the hull, ensuring all work adheres to naval maritime mechanical specifications to maintain structural integrity and lower overall operating costs. Managed under NAICS code 336612 for the Department of Defense, the project is based in Philadelphia. The primary objective is the delivery of certified operational waterjet mechanical assemblies. The solicitation was posted on October 22, 2026, with a response deadline of November 6, 2026.

General Info

Mechanical engineering and maintenance for Naval Surface Warfare Center waterjet assemblies in Philadelphia.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

336612 - Boat Building

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

This scope was carved out of N6449827R0503.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Waterjet Support Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 09:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs mechanical engineering and technical maintenance on physical waterjet assemblies for prime contractors on Naval Surface Warfare Center Philadelphia Division (NSWCPD) projects. Inspects and maintains four waterjets per ship external to the hull per naval maritime mechanical specifications to ensure structural integrity and reduce operating costs. Delivers certified operational waterjet mechanical assemblies.

Similar Contracts

Same NAICS industry code

20--HATCH,MARINE

Solicitation # SPE7M427T1648

DLA Weapons Support

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Mine Sweeping FloatsThis subcontract, issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines, requires the manufacture and supply of seven specialized mine sweeping floats, part number 1075-01-216-9251. The contractor must fabricate these units in strict accordance with Reference Drawing 53711 6169241, Revision A, and adhere to MIL-STD-2073-1E for packaging and preservation. Additionally, the contractor is responsible for assigning unique item identifiers and serialization data, providing all necessary inspection and receiving reports upon delivery. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612, with the place of performance located in San Diego, California. Interested parties must respond by November 3, 2026. This contract supports prime contractors on DLA naval supply operations, ensuring the delivery of critical maritime hardware meeting precise military specifications.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 24 hours ago

DEADLINE

Precision Marine Hardware FabricationThis subcontract for Precision Marine Hardware Fabrication involves the fabrication of marine hatches for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work includes precision machining, forming, and the assembly of hatch structures and frames in strict accordance with restricted OEM drawings to ensure pressure integrity and watertight seals. The final deliverable is the completed and assembled Marine Hatch, identified by NSN 2040-01-680-9435. To be eligible for this project, contractors must hold JCP certification and maintain CMMC Level 2 compliance. The work is categorized under NAICS code 336612 and will be performed at location 96661. Interested parties must submit their responses by the deadline of November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M0-27-T-0590

Solicitation SPE7M0-27-T-0590 is a federal procurement issued by the DLA Weapons Support Maritime Supply Chain for one unit of a marine door dog, identified as NSN 2040014260119. This is designated as a critical application item and must be manufactured according to Technical Data Package Rev A Gen 2 and Basic Drawing NR 53711 5959220 dated May 11, 1985, with part piece number 803-5959220 PC 64. The required delivery date is August 21, 2026, with shipping terms set as FOB Origin under the First Destination Transportation program, delivering to a warehouse in Fife, Washington. The contract mandates strict quality and safety compliance, requiring manufacturers to adhere to SAE AS9003 or ISO 9001 standards and utilize zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Prohibitions are in place against the use of Class I ozone-depleting chemicals and the intentional addition of mercury, per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-129 and DLA requirement RP001. This is not a small business set-aside, though HUBZone concerns may receive price evaluation preference. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1498

Solicitation SPE7M4-27-T-1498 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Marine Hatch, identified by NSN 2040-01-680-9435. This is a restricted source item that must be manufactured according to the original equipment manufacturer drawings. The item is to be delivered to the USS BOXER LHD 4 at FPO AP 96661 within 20 days after receipt of the order, with an original required delivery date of September 24, 2026. The procurement falls under NAICS code 336612 and is not a small business set-aside, although there is a preference for award to HUBZone concerns. The contract mandates strict adherence to quality and technical requirements, including the prohibition of Class I ozone-depleting chemicals and the exclusion of additive manufacturing processes unless specifically authorized. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Hull Coating and PreservationThis small business set-aside subcontract, titled Hull Coating and Preservation, involves providing specialized inspection and coating application services for US Coast Guard SFLC vessel projects. The scope of work includes surveying underwater hull plating and coating systems, performing touch-up preservation, and preparing surfaces through grinding or sandblasting to ensure a seamless match with adjacent areas. The ultimate goal is the delivery of fully preserved and coated hull surfaces. Managed by the Department of Homeland Security under agency CG-SEA-C22, the project requires the use of Certified Coating Inspectors to ensure quality standards are met. Interested parties must respond by November 16, 2026, for this opportunity categorized under NAICS code 336612.

POSTED

DEADLINE

Supply of QQ-N-281 Class B Raw MaterialThis subcontract involves the procurement and delivery of certified raw material stock for prime contractors supporting NAVSUP Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the sourcing and delivery of Round Bar or Hex Bar that strictly adheres to QQ-N-281, Class B specifications, ensuring the materials are suitable for high-stress shipboard environments. To maintain quality and compliance, the provider must supply comprehensive mill test reports and material certifications verifying that all mechanical properties meet the required standards. This opportunity falls under NAICS code 336612, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Wooden Coat and Suit Hanger Manufacturing and SupplyThis subcontract opportunity, managed by the Department of Defense for W6QM Micc-West Point, involves the manufacturing and supply of high-quality hardwood coat and suit hangers for prime contractors working on US Army West Point procurement projects. The required hangers must be fabricated from sturdy hardwood with a natural, semi-polished finish, featuring chrome hanging hooks and non-slip wooden trouser bars without metal retaining bars. All products must comply with the Buy American Act under FAR 52.225-1, and the contractor is responsible for delivering both the finished hangers and pre-award physical samples and specifications. The project is designated as a Total Small Business Set Aside under NAICS code 336612, with the place of performance located in West Point, New York. Interested parties must adhere to the response deadline of October 27, 2026. This procurement ensures that the specific material and design standards are met to support the operational needs of the military installation.

W6QM Micc-West Point

POSTED

DEADLINE

Manufacture of Department Head Lockers (Unit No. 15)This small business set-aside subcontract involves the manufacture and supply of four custom Department Head Locker Unit No. 15 assemblies for the USS MCFAUL, supporting US Navy MARMC projects. The contractor is responsible for fabricating the units using aluminum with mandatory rigidized construction in accordance with MIL-PRF-32038. Each unit must feature a Formica Nat Oak No. 346 matte finish and include the installation of three-inch subbases. Due to the nature of the export-controlled drawings, the contractor must maintain JCP Certification to perform the work. The project falls under NAICS code 336612 and is managed through the Mid Atlantic Regional Maintenance Center for the Department of Defense. The final deliverable consists of four completed locker assemblies meeting all specified military and aesthetic standards.

Mid Atlantic Reg Maintenance Ctr

POSTED

DEADLINE

20--HATCH,MARINE, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RDB49

Solicitation N0010426RDB49 is a firm-fixed-price request for proposal issued by NAVSUP Weapon Systems Support Mechanicsburg for the repair of Marine Hatches (NIIN 013455961). The government is seeking a Repair Turnaround Time (RTAT) of 100 days, and this metric will be used as a key factor in the source selection evaluation. The award will be made to a single eligible and responsible offeror based on the most advantageous offer, with past performance weighted as more important than price. Failure to meet the established RTAT will result in a price reduction per unit per month, to be implemented via a reconciliation modification. The scope of work requires all repairs to be performed according to the contractor's standard practices and original manufacturer specifications, with mandatory Government Source Inspection (GSI). Technical requirements include physical identification per MIL-STD-130 and soldering compliance with IPC J-STD-001 Class 3. Packaging must adhere to MIL-STD-2073, with specific levels based on whether the destination is CONUS or OCONUS. Freight is handled by the Navy as FOB Origin under the Commercial Asset Visibility (CAV) Statement of Work. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and receiving reports. Offerors must provide a completed full text version of FAR 52.209-13 and proof of being an authorized distributor of the original manufacturer's item. The solicitation has been amended to extend the offer due date to November 10, 2026, and to remove certain Affirmative Action and Non-Segregated Facilities certifications in accordance with Executive Order 14173.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

SHOE SET,COUNTER CL — 2010012674906 — SPRMM127QMA05

Solicitation # SPRMM127QMA05

This solicitation, issued by DLA Mechanicsburg for the Department of the Navy, seeks quotations for the manufacture and delivery of a Shoe Set, Counter CL (NSN 7HH 2010-01-267-4906). The required items must conform to the design represented by Cage Code 75333, reference number 469118-PC 37X39. This is a total small business set-aside under NAICS code 336612, with award based on the Lowest Price Technically Acceptable (LPTA) criteria. Delivery is required as soon as possible on an FOB Destination basis. The contractor is responsible for all quality assurance and inspection at the point of origin, maintaining records for 365 days after final delivery. Strict adherence to marking and packaging standards is required, specifically MIL-STD-130 for physical identification and MIL-STD-2073 or ASTM D3951-18 for preservation and packing. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and may be required to provide traceability evidence. All submissions must comply with specified cybersecurity, Buy American, and hazardous material reporting requirements.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Panel Floor Sections (NSN 2040-01-657-1542)This subcontract involves the manufacture or sourcing of five specialized panel floor sections for watercraft, identified by NSN 2040-01-657-1542. The project supports prime contractors fulfilling DLA maritime supply chain contracts for the Department of Defense. All materials provided must strictly adhere to the Buy American Act and the Berry Amendment to ensure domestic compliance. The contractor is responsible for packaging and marking the units in accordance with MIL-STD-129 and ASTM D3951, with palletization meeting RP001 requirements. Performance for this contract will take place in Houston, Texas. The solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Waterjet Control Unit (WCU) Technical ServicesThis subcontract focuses on providing specialized engineering and technical services for electric and electronic control systems supporting prime contractors on projects for the Naval Surface Warfare Center Philadelphia Division. The primary scope of work involves the maintenance and optimization of Waterjet Control Units, specifically improving electronic interfaces between the units and waterjet hardware while ensuring all deliverables meet strict naval electronic systems standards. The project is managed under NAICS code 541330 and is performed in Philadelphia. The ultimate goal of the engagement is the delivery of fully operational and optimized Waterjet Control Units to support Department of Defense requirements.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Hydraulic Power Unit (HPU) and PTO Pump SupportThis subcontract focuses on providing specialized maintenance, repair, and engineering services for hydraulic systems supporting prime contractors on Naval Surface Warfare Center Philadelphia Division projects. The scope of work involves servicing Hydraulic Power Units and Power Take Off pumps, with a specific emphasis on implementing reliability and maintainability improvements for hydraulic ancillary equipment in accordance with naval maritime engineering standards. The ultimate objective is the delivery of fully operational and maintained hydraulic power and pumping systems. The project is managed under the Department of Defense for the NSWC Philadelphia Division, with performance taking place in Philadelphia, Pennsylvania. Classified under NAICS code 811210, the opportunity was posted on October 22, 2026, with a response deadline of November 6, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Waterjet Support Services

Solicitation # N6449827R0503

The Naval Surface Warfare Center Philadelphia Division is intending to award a sole source Basic Ordering Agreement with Firm-Fixed-Price ordering provisions to Defense Maritime Solutions of Chesapeake, Virginia. This requirement, identified under solicitation N6449827R0503 and NAICS code 541330, is being pursued under the authority of FAR 6.302-1, as only one responsible source can satisfy the agency requirements. The government aims to finalize the award prior to the fourth quarter of fiscal year 2027. The scope of work involves providing engineering and technical services to maintain the operational readiness, safety, and mission effectiveness of the Littoral Combat Ship, Independence Variant (LCS-2V) Waterjets. Specifically, the contractor will support the mechanical, hydraulic, and electric control systems for four waterjets per ship, including associated hydraulic power units and power take off pumps. The primary objective of these services is to enhance the reliability and maintainability of the systems while reducing long-term operating and support costs. Performance will be centered in Philadelphia, Pennsylvania.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Solicitation # N6449826Q5279

Solicitation N6449826Q5279 is a procurement opportunity issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. The project falls under NAICS code 336611, which pertains to the manufacture of boat and marine vessel propulsion systems. The agency is located in Philadelphia, Pennsylvania. The solicitation was posted on October 21, 2026, with a response deadline set for November 6, 2026. Interested parties can coordinate with primary point of contact Emily Mcneill or secondary contact Sean McGinley for further inquiries. Additional details regarding the scope of work can be accessed via the provided SAM.gov link or the PIEE portal.

Ship Building and Repairing

POSTED

DEADLINE

Heavy Equipment Transport to NFPCThis small business set-aside subcontract involves providing specialized shipping and delivery services for prime contractors supporting the NSWC Philadelphia Division. The scope of work requires the loading, securing, and transport of 18 industrial workhorses using flatbed trucks or heavy-haul trailers for delivery to NFPC Building 1081 in Philadelphia, Pennsylvania. All operations must adhere to strict technical standards, specifically requiring that packaging and marking comply with ASTM-D-3951-18 and MIL-STD-130. The project falls under NAICS code 484220 and is managed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Engineer-Rated Capacity Tags and StickersThis subcontract, issued by the Department of Defense for the NSWC Philadelphia Division, requires the supply of engineer-rated capacity identification tags and stickers for prime contractors. The scope of work involves producing durable, industrial-grade steel tags created through etching or stamping, as well as high-visibility load capacity stickers made from industrial adhesive vinyl. The contract specifically covers the delivery of these materials for 18 units. This opportunity is designated as a Total Small Business Set Aside under NAICS code 339999, with a response deadline of November 4, 2026. Performance will take place in the 19112 zip code area.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Heavy-Duty Compression CastersThis small business set-aside subcontract involves the supply of high-capacity, spring-loaded compression casters for prime contractors working on projects for the Department of Defense, specifically the NSWC Philadelphia Division. The required casters must be engineered to support the distributed load of industrial workhorses with a capacity of 150,000 lbs. The scope of work requires the delivery of caster sets for 18 units, which are to be shipped directly to the prime contractor or fabricator. Performance will take place in the 19112 zip code area, with the procurement falling under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Safety Yellow Powder Coating ServicesThis small business set-aside subcontract involves providing specialized industrial powder coating services for the NSWC Philadelphia Division under the Department of Defense. The scope of work requires the surface preparation of structural steel and the application of a Safety Yellow powder coat finish using industrial booths and curing ovens. The final product must adhere to strict industrial durability standards suitable for a foundry environment. The project specifically requires the delivery of 18 powder-coated industrial workhorses. Performance will take place in the 19112 zip code area. This opportunity is categorized under NAICS code 332813 and was posted on October 20, 2026, with a response deadline of November 4, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Fabrication of Industrial WorkhorsesThis small business set-aside subcontract involves the fabrication of 18 heavy-duty industrial workhorses for prime contractors supporting the Department of Defense at the NSWC Philadelphia Division. The project requires the production of structural steel welded frames with steel top surfaces in two specific size profiles, 24 by 36 inches and 36 by 42 inches, each engineered to support a capacity of 150,000 lbs. The contractor must utilize heavy-duty welding equipment and adhere to a strict approval process involving the submission of technical drawings. Upon completion, the contractor is required to provide PE stamped drawings to certify the load rating of the delivered units. All work will be performed in the 19112 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Netscout Fiber Switch Vendor Support

Solicitation # SIMACQ-PD-60-0104

The Department of Defense, through the Nswc Philadelphia Division, is seeking a three-year vendor service contract for a Keysight 3903 fiber optic network switch. This equipment will function as a signal routing mechanism and data packet analysis tool to interface with pre-production and production equipment under test for the Compatibility Test Facility Motor Module Test Program. The device is essential for enabling full operational capability to transition plant alignment between legacy and production equipment, as well as switching electric plant control between the Pre-production Electric Plant Control Panel and the Test Engineering Design Model. This presolicitation, identified by solicitation number SIMACQ-PD-60-0104, is designated as an 8(a) Sole Source set-aside under NAICS code 811210. The performance of the contract will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of October 27, 2026, and may contact Stefan Kitzinger for further information regarding this requirement.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

N6449826Q5248 Industrial Workhorses

Solicitation # N6449826Q52480004

Solicitation N6449826Q52480004, issued by the NSWC Philadelphia Division, seeks a contractor to supply and deliver 18 industrial work horses to the Naval Foundry and Propeller Center in Philadelphia, Pennsylvania. The requirement consists of twelve units measuring 24 inches high by 36 inches wide and six units measuring 36 inches high by 42 inches wide, all featuring a 150,000 lbs capacity per unit. The equipment must have a safety yellow powder coat finish and include engineer rated steel capacity tags and load stickers. Delivery is required within 90 calendar days from the date of award, with shipping costs included in the price and terms set as Contractor Destination. This is a total small business set-aside, specifically targeting HUBZone, SDVOSB, and EDVOSB entities. The Navy will award the contract to a single offeror based on the lowest priced technically acceptable quote. Evaluation factors include a capability statement demonstrating the necessary experience and personnel, as well as past performance on up to five similar projects from the last five years. Proposals must be submitted electronically via email to the designated contracting officials. The contract incorporates various FAR and DFARS clauses, including Buy American requirements, CMMC Level 1 cybersecurity standards, and strict packaging and marking guidelines according to ASTM-D-3951-18 and MIL-STD-130. Invoicing is to be processed electronically through the Wide Area WorkFlow system.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Seaport - CTF Design Services Follow On

Solicitation # N6449826R0020

This Small Business Set-Aside opportunity is reserved exclusively for SEAPORT NxG MAC holders to provide design services for the Compatibility Test Facility (CTF) under the cognizance of the Naval Surface Warfare Center Philadelphia Division (NSWCPD). The requirement is a Cost Plus-Fixed-Fee task order with a five-year period of performance from March 9, 2027, to March 8, 2032, consisting of one base year and four option years. The scope includes the design of test and evaluation facility installations, systems, and equipment, specifically covering existing and proposed Hull, Machinery Electrical (HM&E) systems. The contractor will provide a range of support from small test stands to full-scale land-based engineering sites, including conceptual, preliminary, and detailed design, as well as the maintenance of a daily updated whole-site computer-based model in AutoCAD. Key deliverables are managed through an extensive list of Contract Data Requirements Lists (CDRLs), including design drawings, cost estimates, engineering analysis, and environmental permit documentation. The contractor must provide licensed Professional Engineer support and adhere to strict quality standards, including ASQ/ANSI/ISO 9001:2015. Personnel must meet specific security requirements, including Tier 3 investigations for site and network access, and complete mandated cybersecurity and environmental training. Award will be based on best value, evaluating technical approach, management, personnel, and past performance, with a total estimated labor requirement of 21,600 hours per year. All proposals must be submitted via the PIEE Solicitation Module.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS