Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Waveguide Assembly Supplier

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Active Devices Division involves the manufacture or procurement of 20 waveguide assemblies for prime contractors. The supplier must ensure all units adhere to the DLA Master List of Technical and Quality Requirements, specifically RA001, RP001, RQ011, RC001, and RQ002, while utilizing precision RF waveguide materials and fabrication equipment. The project requires strict compliance with RD002 for Covered Defense Information and MIL-STD-129 for marking and labeling. Performance will take place at Shaw AFB, and the final deliverable consists of 20 completed and labeled assemblies. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, under NAICS code 334290.

General Info

Manufacture 20 waveguide assemblies for DoD following DLA and MIL-STD quality requirements.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

SHAW AFB, SC, 29152-5125, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-497H.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WAVEGUIDE ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Waveguide Assemblies for prime contractors on DLA Active Devices Division projects. Manufactures or procures 20 units meeting DLA Master List of Technical and Quality Requirements RA001, RP001, RQ011, RC001, and RQ002. Utilizes precision RF waveguide materials and fabrication equipment. Complies with RD002 for Covered Defense Information and MIL-STD-129 for marking and labeling. Delivers 20 completed, labeled assemblies.

Similar Contracts

Same NAICS industry code

Supply of RF Component P/N FRF-115CThis subcontract with the Department of Defense Active Devices Division involves the supply of electronic components for prime contractors. The specific requirement is for two units of the First RF Corporation part number FRF-115C, identified by NSN 5985016339738. The selected provider is responsible for manufacturing or sourcing the components to ensure they meet all technical specifications associated with the national stock number. The contract falls under NAICS code 334290 and specifies Camp Pendleton, California, as the place of performance. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-30BK

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of one annunciator, identified by NSN 6340-01-557-8364. The contract requires delivery within 171 days after receipt of order, with the place of performance located at Tinker AFB. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and configuration change management protocols. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training. Item Unique Identification is not required for this specific request.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

CONTROL, COMPUTER

Solicitation # SPE4A7-26-T-743H

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

RF Sub-Assembly ManufacturingThis subcontract involves the manufacture of one RF Sub-Assembly, part number 4524400, for prime contractors supporting NAVSUP Fleet Logistics Center Norfolk projects. The production must adhere to the qualified baseline for the MK-666 CWI Noise Test Set MOD 3, utilizing precision assembly tools specifically designed for high-frequency electronics. Additionally, the manufacturer must ensure full compliance with Department of Defense Unique Item Identification requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense. Performance of the contract will take place in Yorktown, Virginia, with a response deadline set for September 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 14 hours ago

DEADLINE

in about 19 hours

Phillips Target Range Rebuild

Solicitation # W911SF26Q014

This non-personal services contract, solicitation number W911SF26Q014, is a total small business set-aside for the rebuild of two live-fire turning target control systems at Phillips Range, Fort Benning, Georgia. The contractor is responsible for providing all labor, materials, equipment, and programming to remove obsolete components and design, fabricate, install, and validate two new systems, consisting of eight turning targets across four lanes. The project requires the installation of programmable logic controllers, wireless handheld remotes, and interface displays, with the final goal of restoring full range operability for Army marksmanship training. The contract is a firm-fixed-price effort with a performance period of 120 calendar days from the notice to proceed. Award will be based on the lowest price technically acceptable criteria, requiring vendors to be registered in sam.gov under NAICS code 334290. Key personnel requirements include a Project Lead and a certified Electrical/Controls Engineer. All work must comply with National Electrical Code standards and specific Army range safety regulations, including AR 385-63. Final acceptance is contingent upon a successful on-site demonstration of 100 percent wireless reliability and functional validation of target cycling intervals.

W6QM Micc-Ft Benning

POSTED

about 14 hours ago

DEADLINE

Supply of Replacement Parts for Indicator Attitude (P/N 75–0172–01)This subcontract involves the supply of OEM or approved equivalent internal components, including gyroscopes, dials, sensors, and electronic boards, for the Indicator Attitude part number 75-0172-01. Supporting prime contractors on NAVSUP Weapon Systems Support projects, the provider must ensure all parts meet the technical specifications of NSN 5999-01-483-4397 and deliver either certified airworthy individual components or complete repair kits. The contract requires strict adherence to certification of origin standards per DFARS 252.225-7035. Managed under NAICS code 334290 for the Department of the Navy, the performance of this contract is centered in Philadelphia, Pennsylvania. The response deadline for this opportunity is October 15, 2026.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

Avionics Component Parts SupplierThis subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the supply of authentic replacement parts, electronic components, and seals for Air Data Computer part number 6605 016885068. The supplier is responsible for sourcing OEM or approved equivalent parts and providing certification of origin to ensure full compliance with the Buy American and Trade Agreements Act. These materials are essential for prime contractors on NAVSUP WSS aviation projects to achieve ready for issue status. The opportunity is categorized under NAICS code 334290 and is based in Philadelphia. The solicitation was posted on September 15, 2026, with a response deadline of October 30, 2026.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Occupancy Sensor and Monitoring Hardware SupplyThe University of Portsmouth Higher Education Corporation is seeking a subcontractor to supply occupancy sensors and monitoring hardware for campus projects. The selected provider will deliver a range of PIR, optical, or AI-based sensors, along with gateways and mounting hardware, to enable the collection of real-time and historical room-level occupancy and headcount data. All supplied hardware must comply with CE and UKCA marking standards and will be deployed across an initial set of campus buildings. This subcontract opportunity was posted on September 14, 2026, with a response deadline of October 12, 2026. The contract falls under NAICS code 334290 and is managed by the University of Portsmouth Higher Education Corporation.

University of Portsmouth Higher Education Corporation

POSTED

DEADLINE

Supply of Sensitive Switches (NSN 5930-01-340-9143)This subcontract involves the procurement and delivery of 80 units of sensitive switches, identified by NSN 5930-01-340-9143, for prime contractors supporting Department of Defense supply contracts. The work is managed by the Electrical Devices Division and is designated as a Total Small Business Set-Aside under NAICS code 334290. Performance will take place in San Diego, California, with delivery handled via FOB Origin under the First Destination Transportation program. The contractor must be registered in SAM.gov and adhere to specific technical standards, including RP001 DLA Packaging Requirements and MIL-STD-129 for the marking of radioactive materials. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

RO Simulator (NSN 4610015273761) SupplierThis subcontract involves the supply of a Remotely Operated Vehicle ROV Simulator system for prime contractors supporting the DDSP New Cumberland Facility. The supplier is responsible for manufacturing or sourcing a single unit that meets the technical specifications for NSN 4610015273761 and adheres to the RQ006 Quality Conformance Inspection. The delivery is set as FOB Origin and falls under NAICS code 334290. The opportunity was posted on September 14, 2026, with a response deadline of September 25, 2026, for performance at the New Cumberland location.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Remote Control Units (NSN 3810999941741)This subcontract involves the supply of one specific remote control unit, identified by NSN 3810999941741, for prime contractors delivering DLA supply contracts. The provider is responsible for sourcing or manufacturing the unit and ensuring that all packaging and quality assurance processes adhere to RP001 and RA001 standards. The contract also requires strict compliance with FAR clauses regarding trafficking and employment eligibility. The delivery of the finished unit is to be made to a government-arranged transportation point. This requirement is managed by the Department of Defense under the agency Construction & Equipment Manu & Con, with the place of performance located in Johnson City, Tennessee. The solicitation was posted on September 14, 2026, with a response deadline of September 17, 2026, falling under NAICS code 334290.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Signal Components SupplyThe Signal Components Supply subcontract is for the provision of signal relays, plugboards, and electronic components to prime contractors working on Sonoma-Marin Area Rail Transit projects. The supplier must provide certified failsafe equipment that meets the standards established by the AREMA Communications and Signals Manual and is supported by proven in-service experience. This opportunity is issued by the Sonoma-Marin Area Rail Transit District in California, with the place of performance located in Petaluma. The solicitation was posted on September 14, 2026, and requires a response by October 16, 2026. The contract falls under NAICS code 334290 for electronic connector and switch manufacturing.

Sonoma-Marin Area Rail Transit District (SMART)

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Supply of Plug-in Electronic Component Socket AdaptersThis subcontract with the Department of Defense Active Devices Division involves the procurement and delivery of four plug-in electronic component socket adapters, specifically part NSN 5935016590199. The materials must be packaged according to RP001, FED-STD-313, and TQ IP025 standards. Delivery is required FOB Origin within 20 days of the award. The contract requires strict adherence to DFARS 252.225-7001 and NIST SP 800-171 compliance. Performance will take place at Camp Pendleton, California. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

Specialized Packaging and Palletization ServicesThis subcontract for the Active Devices Division of the Department of Defense involves providing specialized packaging, labeling, and palletization services for prime contractors. The contractor is responsible for processing hazardous materials according to FED-STD-313 and TQ REQUIREMENT IP025, while non-hazardous materials must adhere to ASTM D3951 standards. All palletization must be executed in compliance with RP001 DLA Packaging Requirements for Procurement to ensure shipments are ready for transport. The project is categorized under NAICS code 488510 and will be performed in Tracy, California. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935010127887)This subcontract with the Department of Defense Active Devices Division involves the manufacture or sourcing of electrical plug connectors identified by NSN 5935010127887. The supplier is responsible for delivering physical connectors that meet Qualified Products List requirements per FAR 52.209-1 and Sustainable Products Deviation 2026-O0038 to support prime contractors. The project falls under NAICS code 334417 and is designated for performance in Tracy, California. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE

Variable Wire Wound Resistor SupplyThis subcontract with the Department of Defense Active Devices Division involves the supply of variable wire wound resistors for prime contractors. The provider is responsible for manufacturing or sourcing components that strictly adhere to Vishay Sprague specifications for part numbers 80-3-3-201 and 80-3-7-201, ensuring all delivered resistors meet required electrical and physical tolerances. Compliance with industry standards is mandatory, specifically requiring markings per IPC/JEDEC J-STD-609 and MIL-STD-129 to clearly identify Lead and Pb-Free attributes. The opportunity is categorized under NAICS code 334416, with a response deadline set for September 28, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Connector Backshells (NSN 5935013179367)This subcontract involves the manufacture or distribution of three electrical connector backshells under NSN 5935013179367 for the Department of Defense Active Devices Division. The selected provider must deliver the units to ASD Point Mugu and adhere to strict packaging and marking standards, specifically RP001, MIL-STD-2073-18E, and MIL-STD-129. Additionally, the contractor is responsible for labeling hazardous materials in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001. To be eligible, the contractor must maintain an active SAM registration and ensure full compliance with FAR 52.204-24. The opportunity falls under NAICS code 334417, with a response deadline of September 28, 2026.

Electronic Connector Manufacturing

POSTED

about 9 hours ago

DEADLINE

Electromagnetic Relay Component SupplierThis subcontract, managed by the Active Devices Division of the Department of Defense, requires the manufacture or sourcing of 28 electromagnetic relays. The components must strictly adhere to NSN 011788380 and FSC 5945 specifications, as well as the DLA Master List of Technical and Quality Requirements. All items must undergo quality control in accordance with FAR 52.246-1 and be packaged following RP001 DLA Packaging Requirements. The contract falls under NAICS code 335314 and specifies that the 28 units be delivered FOB Origin. Performance will take place in Tracy, California. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Relay and Industrial Control Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Connector Backshells (NSN 5935-01-515-4199)This subcontract involves the supply of two specialized electrical connector backshells, specifically part number NSN 5935-01-515-4199, for prime contractors working on projects for the Department of Defense Active Devices Division. The items must be manufactured or sourced in strict accordance with technical standard SAE AS85049B and DLA Packaging Requirements for Procurement RP001. A critical requirement for the contract is that the manufacturer must be qualified at the time of the award. The project is categorized under NAICS code 335999 and will be performed in Portsmouth. Interested parties must submit their responses by September 29, 2026, following the posting date of September 15, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Electrical Solenoid Manufacturing and SupplyThis subcontract involves the manufacture and supply of finished electrical solenoids for prime contractors delivering to the Active Devices Division of the Department of Defense. The contractor is responsible for delivering finished, packaged, and marked solenoids, ensuring that unit package markings for component lead finish adhere to IPC/JEDEC J-STD-609 and that all packaging complies with MIL-STD-129. Additionally, the provider must maintain compliance with the DLA Master List of Technical and Quality Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335999, with the place of performance located at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

DLA Compliant Packaging ServicesThe DLA Compliant Packaging Services subcontract, issued by the Department of Defense Active Devices Division, requires the specialized packaging and labeling of loudspeaker assemblies for prime contractors. The service provider must adhere to the RP001 DLA Packaging Requirements for Procurement, utilizing military-grade materials and labeling systems to ensure items are protected during transit to destination inspection points. The final deliverable is a packaged and labeled assembly ready for shipment. This opportunity is categorized under NAICS code 561910, with the place of performance located at FPO 09520. The response deadline for this requirement is September 28, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Loudspeaker Assembly SupplierThis subcontract involves the manufacture and supply of Loudspeaker Assembly NSN 5965016518488 for prime contractors supporting Department of Defense supply contracts. The selected supplier must ensure all assemblies meet the technical specifications and the DLA Master List of Technical and Quality Requirements, with packaging adhering to RP001 standards. Delivery is required FOB Destination to FPO 09520. Managed by the Active Devices Division, the opportunity falls under NAICS code 334310. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

Audio and Video Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Linear Microcircuit SupplierThis subcontract involves the supply of linear microcircuits for prime contractors supporting the Department of Defense Active Devices Division. The supplier is responsible for manufacturing or sourcing components that meet Federal Stock Class 5961 requirements and must ensure all unit package markings adhere to IPC/JEDEC J-STD-609 paragraph 6.2. To maintain quality and security standards, the provider must comply with FAR 52.204-24 and provide counterfeit prevention certification using DLA CDAP Form 918. The contract requires the delivery of specified quantities of microcircuits to the DLA Distribution DDWO located in Columbus, Ohio. This opportunity falls under NAICS code 334413 and was posted on September 15, 2026, with a response deadline of September 28, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Linear MicrocircuitsThis subcontract with the Department of Defense Active Devices Division involves the manufacture or sourcing of 26 linear microcircuits under NSN 013271211. The contractor is responsible for ensuring all units meet specific technical standards, including unit package marking for component lead finish according to IPC/JEDEC J-STD-609 and shipment labeling as per MIL-STD-129. The project requires strict adherence to FAR 52.246-2 for destination inspection to ensure quality control upon delivery. Performance for this contract will take place in Columbus, Ohio, with the final deliverable consisting of 26 properly marked and packaged microcircuits.

Semiconductor and Related Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS