This Solicitation opportunity from Government of Canada was posted on June 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Welding Services, Serpentine Dyke Sheet Pile Wall Extension

Closed

BC1220-040-2026-046International

Submission Closed06/17/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238120

New

Federal

Steel and Structural Erection ServicesThe contract titled Steel and Structural Erection Services is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 238120 for structural steel contracting. It was posted on July 25, 2026, and requires responses by August 5, 2026, at 10:00 PM. The work involves the fabrication and erection of structural steel components for buildings, bridges, and industrial structures, with the sole place of performance located in Portland, Oregon, under the agency designation W071 Endist Portland, a division of the Department of Defense. All work must be performed by a qualified small business entity, and the contract is exclusively reserved for such entities to ensure compliance with federal small business procurement goals.

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the erection of structural columns and framework for covered aircraft parking structures under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA under FAR 19.5. The NAICS code 238120 classifies this as structural steel erection work, and the project is tied to the Department of Defense through the agency identifier FA6648 482 Lss Lgc. Work must be performed at Homestead, Florida, with a zip code of 33039, and all responses are due by August 21, 2026, at 4:00 PM. The contract is issued as a subcontract and was posted on July 24, 2026, with interested parties directed to the SAM.gov workspace for further details and submission instructions.

POSTED

DEADLINE

Structural Steel Support InstallationThe contract is for the fabrication and installation of structural steel supports to accommodate new rooftop mechanical equipment, under the NAICS code 238120 for structural steel contracting. This is a subcontract opportunity posted by the state of Utah with a response deadline of August 20, 2026. The work will involve designing, fabricating, and securely installing steel structures capable of supporting heavy mechanical units on rooftops, requiring adherence to engineering standards and safety codes. While no specific location or point of contact is provided, the project is linked to Utah’s facilities and must be performed in compliance with applicable state and local building regulations. All proposers must submit their responses by the stated deadline to be considered for award.

POSTED

DEADLINE

Park City Ice Arena Rooftop Mechanical Support ImprovementsPark City Municipal Corporation is soliciting bids for structural steel support upgrades and related mechanical disconnect and reconnect services for rooftop equipment at the Park City Ice Arena. The project requires qualified bidders to assess, modify, and reinforce the existing structural framework to safely support mechanical units, ensuring compliance with safety and operational standards. All work must be performed with minimal disruption to facility operations, and bidders are expected to coordinate closely with existing systems during disconnect and reconnection phases. Attendance at the mandatory pre-bid meeting on August 14, 2026, at 9:00 a.m. at 600 Gillmor Way, Park City, UT, is strongly encouraged to clarify scope, site conditions, and expectations. Reasonable accommodations for the meeting must be requested at least 48 hours in advance. The solicitation, designated PCMC27010 - ICE, was posted on July 23, 2026, and bids are due by 9:00 p.m. Mountain Time on August 20, 2026. The contract is open to all qualified contractors without specific set-aside classifications and is being managed by the Utah agency. Proposals must demonstrate technical capability, experience with similar structural and mechanical retrofit projects, and adherence to local building and safety codes. All work will be performed on-site at the Park City Ice Arena, and bidders are strongly advised to conduct a thorough site inspection prior to submission. The full solicitation details and submission instructions are available through the provided online portal.

POSTED

DEADLINE

Structural Framing & RoofingThe contract involves the installation of wood or metal framing for walls, roofs, and partitions, along with the full scope of roof decking, underlayment, and roofing system installation. Work is to be performed at Pryor, Montana, with a zip code of 59066, and is set aside exclusively for Indian Small Business Economic Enterprise (ISBEE) contractors, specifically designated for Department of Interior and Indian Health Services procurements. The NAICS code 238120 categorizes this as a structural framing subcontract, and bids must be submitted by August 4, 2026, by 9:00 PM local time, following a posting date of July 23, 2026. The contracting office is the Division of Engineering Services in Seattle under the Department of Health and Human Services, though no point of contact or full office address is provided.

Division Of Engineering Svcs - Seattle

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the erection of a structural steel framework encompassing columns, beams, and bracing, and is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, ensuring eligibility exclusively for small businesses. The North American Industry Classification System code 238120 applies, indicating the work falls under structural steel erectors. The solicitation was posted on July 23, 2026, with a firm deadline for responses set for August 10, 2026, at 4:00 PM. The awarding agency is the Department of the Interior through its Washington D.C. Office, though specific location details for performance or contact information are not provided. All work is expected to be performed under the constraints of a small business set-aside, with no indication of subcontracting allowances beyond that requirement. Interested parties must submit proposals through the SAM.gov platform via the provided portal link before the deadline.

POSTED

DEADLINE

Structural Steel Erection for Water TowerThe contract pertains to the fabrication and on-site assembly of the structural steel framework for an elevated water tower, encompassing all essential components such as legs, bracing, and the tank support system. Work must be performed in compliance with precise engineering specifications to ensure structural integrity and safety, with all materials and construction methods meeting applicable industry and military standards. The scope requires skilled labor capable of handling heavy steel components, precise welding, and coordination for on-site erection, with attention to schedule and quality control throughout the process. This subcontract is issued under NAICS code 238120 for Structural Steel Erection and is managed by the Department of Defense through its W076 Endist Tulsa office. The solicitation was posted on July 23, 2026, with a firm deadline for responses set for August 6, 2026, at 7:00 p.m. The place of performance is not specified in the provided data, but work is expected to occur at a designated DoD facility requiring secure and regulated access. Bidders must be prepared to meet stringent defense contracting requirements, including potential security, reporting, and compliance obligations, though no set-aside provisions are indicated.

POSTED

DEADLINE

Gavins Point Crane Rail ReplacementThe U.S. Army Corps of Engineers Omaha District is preparing to issue a solicitation for the replacement of the crane runway rail at the Gavins Point Powerhouse Intake near Crofton, Nebraska, with the solicitation expected to be released on or about August 10, 2026, and responses due by September 29, 2026. The project entails the complete removal and installation of 328 feet of 80-ton gantry crane rail, to be aligned to CMAA 70 standards, including demolition of existing rails, clips, asphalt, base plates, and non-shrink grout, as well as replacement of approximately 80 percent of the concrete anchors based on imaging and condition assessments, with all anchors at joint bars replaced. The new anchors must be suitable for cracked concrete and seismic conditions, and the grout pockets will be refilled with two-component aliphatic polyurethane elastomer grout. Work must be sequenced to minimize downtime of the intake crane, typically progressing from one end of the dam to the other with a controlled transfer of the crane to the new rail upon completion of the final segment. The contractor will have 360 calendar days from the Notice to Proceed to complete all work, with an estimated project cost between one and five million dollars. The solicitation is unrestricted and open to both large and small businesses, with the primary NAICS code 238120 and a small business size standard of $19 million in annual revenue. A mandatory site visit is tentatively scheduled for August 26, 2026, with full details provided in the solicitation. All inquiries must be submitted through ProjNet, and performance will occur at the Gavins Point Project in Crofton, Nebraska, with the contracting office located in Omaha, Nebraska.

POSTED

DEADLINE

Band Shelter ConstructionThe contract involves the construction of a permanent band shelter, encompassing all essential components including a foundational structure, full structural framing, roofing, and seamless integration with existing site utilities. The work must meet high standards of durability and functionality to support public use in a municipal setting. The solicitation is classified as a subcontract under NAICS code 238120, which pertains to foundation, structure, and building exterior contractors, indicating that the winning party will likely be a specialized construction firm. The Town of Mount Gilead in North Carolina has issued this solicitation with a posted date of July 23, 2026, and a firm response deadline of July 28, 2026, at 7:00 PM. All work must be performed on-site in the town, though specific location details are not provided. The contract does not specify a set-aside type or designated organizational preferences, and no point of contact information is listed. Interested parties must access the official solicitation details via the provided link on the North Carolina procurement portal.

POSTED

DEADLINE

HDPE Pipe and Drainage System Installation

Personnel-Office of Secretary

POSTED

DEADLINE

Due Diligence Continuous Concrete Mix Station

CPO1 - OFFICE OF THE CHIEF PROCUREMENT OFFICER

POSTED

DEADLINE

Aggregate Subbase and Base Course

MPTAP

POSTED

3 days ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the comprehensive construction and renovation of a sheet pile wall extension along the Serpentine Dyke adjacent to 5168 164th Street in Surrey, British Columbia, involving the removal of existing steel capping plates, installation of new PZC 13 sheet pile extensions supplied by the City, and full-strength continuous field welding in compliance with CSA W47.1 and W59 standards. The Contractor is responsible for all labor, materials, equipment, insurance, transportation, and incidental tasks necessary to complete the work, including precise alignment, interlock sealing, and adherence to tolerances specified in the IFT drawings. Prior to fabrication and installation, the Contractor must conduct field verification of existing sheet pile geometry and elevations, and may be required to prepare surfaces through cutting, beveling, grinding, or cleaning to ensure sound welds. All welding activities require compliance with the City’s Hot Work Permit protocol, including on-site fire watch and fire suppression measures. The City will handle site preparation, vegetation clearing, and civil works, while the Contractor must develop and submit a Traffic Management Plan for City approval and ensure continuous, safe access for local traffic with minimal disruption. A local supplier will deliver the sheet pile sections directly to the worksite after cutting. All quotations must be submitted by June 17, 2026, and the solicitation number is BC1220-040-2026-046, posted on June 4, 2026, under the NAICS code 238120. Any amendments to the request for quotations will only be valid if issued as formal written addenda posted on the BC Bid and City of Surrey websites, and it is the Contractor’s sole responsibility to check for updates. Submission of a quotation constitutes full acknowledgment and acceptance of all terms, conditions, and any applicable addenda. No oral or informal communications will alter the RFQ. All inquiries must be directed in writing to purchasing@surrey.ca, and the contracting authority is Sunny Kaila of the City of Surrey.

General Info

Provide welding and construction services for Serpentine Dyke wall extension, adhering to CSA standards.

Agency

Government of Canada → City of Surrey

NAICS

238120 - Structural Steel and Precast Concrete ContractorsView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 4

Solicitation

Response DeadlineJun 17

Deadline has passed

Submission Closed

06/17/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → City of Surrey

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → City of Surrey

Office AddressN/A

Contacts

Sunny KailaContracting Authority

contact@example.gov

Full Description

REQUEST FOR QUOTATIONSDESCRIPTION OF SCOPE OF WORKThe Work covered under this project consists of the furnishing of all superintendence, overhead, labour, materials, tools, equipment, insurance, fuel, transportation and all things necessary for and incidental to the satisfactory performance and completion of construction and renovation of Welding Services, Serpentine Dyke Sheet Pile Wall Extension, located at adjacent to 5168 164 St Surrey, British Columbia (the “Place of Work”) in strict accordance with the Specifications and accompanying Drawings and subject to all terms and conditions of the Contract.The general components of the Work include:Removal of existing steel capping plates (salvage and optional reinstatement). Installation of new PZC 13 sheet pile extensions (City supplied) onto the existing sheet pile wall. Full-strength continuous welding (field welding of sheet-pile walls in accordance with CSA W47.1 and W59) of extensions to the existing sheet piles in accordance with the drawings and CSA requirements. Sealing of interlocks and completion of all welding, tolerances, and alignment requirements per the IFT drawings. All civil works, vegetation clearing, and site preparation will be completed by the City in advance of construction. The Contractor will be responsible for coordinating and implementing the necessary traffic management when required. The Work is to be completed in a manner that maintains safe and continuous access for local traffic and minimizes disruptions to adjacent roadways and properties. The Contractor must submit a Traffic Management Plan to the City for review prior to the Work. A local sheet pile supplier will cut and supply the sheet pile and can coordinate direct delivery of the sheet pile extension sections to your team for installation. Existing sheet pile geometry and elevations are to be field verified by the Contractor prior to fabrication and installation in accordance with the IFT general notes. Potential preparation of existing sheet pile surface after the removal of the cap plate. Contractor should note if their proposed work includes cutting the individual sheet piles to a uniform elevation, expected beveling or grinding as required, and cleaning surfaces to achieve sound welds. The Contractor shall obtain and comply with the City’s Hot Work Permit requirements prior to undertaking welding or any spark-producing activity, including maintaining appropriate fire watch and fire suppression equipment on site.ADDENDAIf the City determines that an amendment is required to this RFQ, the City Representativewill issue a written addendum by posting it on the BC Bid website at www.bcbid.gov.bc.caand the City website at www.surrey.ca (collectively, the “Websites”), and upon posting, anyaddenda will form a part of this RFQ. It is the responsibility of Contractors to check theWebsites for addenda. The only way this RFQ may be added to, or amended in any way, isby a formal written addendum. No other communication, whether written or oral, from anyperson will affect or modify the terms of this RFQ or may be relied upon by any Contractor.By delivery of a Quotation the Contractor is deemed to have received, accepted andunderstood the entire RFQ, including any and all addenda.All inquiries related to this RFQ should be directed in writing to purchasing@surrey.ca