Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wheelchair Lift and Ramp Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of powered wheelchair lifts or ramps designed for side or rear entry into adaptive vans utilized for medical transport services. These devices must meet technical and safety standards to ensure reliable, secure, and accessible transportation for individuals with mobility impairments, particularly those receiving medical care. The requirement is scoped under NAICS code 333992, which classifies the manufacturing of other transportation equipment, indicating the focus on specialized mobility solutions integrated into van platforms. This action is structured as a subcontract under the Department of Veterans Affairs via the Network Contract Office 23, suggesting the end-use of these devices is to support VA healthcare logistics and veteran transportation programs. The solicitation was posted on May 20, 2026, and while specific set-aside details are not indicated, the nature of the procurement implies potential preference for small businesses or manufacturers with expertise in medical accessibility equipment. The place of performance and point of contact information are not provided, but delivery and installation are expected to align with operational needs of medical transport fleets serving veterans across the country.

General Info

Supply of powered wheelchair lifts/ramps for VA medical transport vans, meeting safety standards for veteran mobility.

Agency

Department Of Veterans Affairs → Network Contract Office 23 (36C263)

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

MN

Set-Aside

NONE

Documents

This scope was carved out of 36C26326Q0733.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

6515--PROS V23 636 INITIAL 23557 NSC VAN MOD (VA-26-00068941) 636-P69976

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 20

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → Network Contract Office 23 (36C263)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → Network Contract Office 23 (36C263)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of powered wheelchair lifts or ramps for side or rear entry into adaptive vans used for medical transport.

Similar Contracts

Same NAICS industry code

HANDLE, TORCH ASSEMB

Solicitation # SPE8E5-27-T-0323

Solicitation SPE8E5-27-T-0323 is a request for quotations from the DLA Troop Support Construction and Equipment office for the procurement of 15 units of Torch Assembly Handles, identified by NSN 3433-01-323-2131 and material number 3433013232131. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 28, 2027, with a need ship date of April 26, 2027, and a delivery timeline of 167 days after order. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special restrictions are in place regarding the use of mercury and hexavalent chromium, and hazardous materials must be labeled according to the Hazard Communication Standard and IP025. Payment will be processed electronically via the Wide Area WorkFlow system. The award process may utilize the HUBZone price evaluation preference, and offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity requirements, including NIST SP 800-171 and DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

ELECTRODE, WELDING

Solicitation # SPE8E9-27-T-0309

Solicitation SPE8E9-27-T-0309 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of 34 spools of welding electrodes, specifically type MIL-316L, Class 1B, with a diameter of 0.035 inches. Each spool is specified as weighing 2 pounds. This is a Qualified Products List item, meaning the manufacturer must be QPL approved at the time of the contract award. The items must adhere to basic specification MIL-E-19933E(1) Revision E and are subject to destination inspection and acceptance. The delivery is required by May 22, 2027, with a need ship date of April 26, 2027, and is shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging requirements are stringent, requiring the unit container to be a hermetically sealed can in accordance with MIL-STD-2073-1E and ASTM-D-3951-98, with palletization following RP001 and MIL-STD-147. Marking must comply with MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on the use of mercury and hexavalent chromium. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

SOLDER, TIN ALLOY

Solicitation # SPE8E5-27-T-0368

Solicitation SPE8E5-27-T-0368 is issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of tin alloy solder, specifically part number 95551 from J. W. Harris Co. Inc. The requirement consists of one unit under NSN 3439016978876, with a required delivery date of October 23, 2026, and a delivery lead time of 20 days after receipt of order. Shipping is designated as FOB Origin, with the destination and acceptance point located at the Carl Pipkin USAR Center in Beaumont, Texas. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for packaging, marking, and labeling per MIL-STD-129 and RP001. Hazardous materials must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard, while non-hazardous materials follow ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS regulations regarding the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the prohibition of covered defense telecommunications equipment. Award evaluation may include HUBZone price preferences and other socioeconomic set-asides under NAICS code 333992.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0393

Solicitation SPE8E6-27-T-0393 is a fixed-price procurement issued by the DLA Troop Support Construction and Equipment office for the supply of welding rods, identified by NSN 3439010549640. The requirement consists of a single line item for a quantity of 19 units. Delivery is required within 167 days after the order is placed, with an original required delivery date of March 5, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Due to the nature of the materials, compliance with IP025 and DFARS 252.223-7001 for the handling and labeling of hazardous materials is mandatory. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This solicitation includes specific regulatory requirements such as the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards, and it offers a price evaluation preference for HUBZone small business concerns.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

TORCH SET, SELF IGNITIN

Solicitation # SPE8E5-27-T-0317

Solicitation SPE8E5-27-T-0317 is a procurement request by the Defense Logistics Agency (DLA) for 62 units of self-igniting propane torch sets, identified by NSN 3433-01-161-4998. The required equipment must feature an instant flame ignitor capable of over 30,000 uses and produce a flame of 2,000 degrees Fahrenheit, designed for use with disposable propane bottles, which are not included in the set. The procurement is managed by DLA Distribution San Joaquin, with a required delivery date of February 8, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations were due by November 9, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

HOLDER, ELECTRODE, WELDI

Solicitation # SPE8E6-27-T-0454

This fixed-price solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment (Class IV), is for the procurement of two welding electrode holders under NSN 3439211098141. The contract requires delivery to the Rotational Force Korea at Camp Casey in Dongducheon, South Korea, with an original required delivery date of October 26, 2026, and a delivery lead time of 20 days after the order. The procurement is governed by NAICS code 333992 and includes specific requirements for the Buy American Act and the Berry Amendment for materials above the micro-purchase threshold. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with all shipments delivered FOB Origin. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the prohibition of certain telecommunications equipment. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

TIP, WELDING TORCH

Solicitation # SPE8E5-27-T-0314

Solicitation SPE8E5-27-T-0314 is a request for quotations for the procurement of 81 welding torch tips, identified by NSN 3433-00-628-7680. The required items must include the mixer and nut and be fully compatible with Victor 300 series welding torches. Acceptable part numbers include Victor Equipment Co 0323-0111 and UniWeld Products Type 4 Size 00. Delivery is required within 167 days after order, with an original required delivery date of April 20, 2027, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM-D-3951-98, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. The procurement falls under NAICS code 333992 and is managed by DLA Troop Support, Construction and Equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0312

Solicitation SPE8E5-27-T-0312 is a small business set-aside procurement issued by the Defense Logistics Agency for 67 units of aluminum alloy filler welding rods. The required material must conform to AWS A5.10/A5.10M-17 and Federal Specification QQ-R-566, specifically 1/16 inch diameter and 36 inches in length. Delivery is required within 50 days after order, with a need ship date of October 31, 2026, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Suppliers must provide Safety Data Sheets and compliant labeling per 29 CFR 1910.1200 for any hazardous materials. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and a prohibition on the intentional addition of mercury. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Quotations are due by November 9, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A6-27-T-7432

Solicitation SPE4A6-27-T-7432 is a request from the Defense Logistics Agency for the procurement of 10 power transformers, identified by NSN 5950014450910 and Northrop Grumman part number 782R567G01. The requirement is designated as a critical application item with a need ship date of April 6, 2027, and an original required delivery date of July 5, 2029. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the origin. The procurement is managed under the First Destination Transportation program to optimize shipping costs via government-arranged transportation to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015. Key technical requirements include CMMC Level 2 self-assessment, adherence to MIL-STD-129 for marking, and compliance with DLA packaging requirements under RP001 and MIL-STD-2073-1E. Hazardous materials must be handled and labeled according to IP025 and 29 CFR 1910.1200. While the solicitation is not a small business set-aside, it incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and requires electronic invoicing through the Wide Area WorkFlow system. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0298

Solicitation SPE8E9-27-T-0298 is a small business set-aside request for quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 29 light-duty, hand-held oxyacetylene welding torches, identified by NSN 3433002559332. The items must meet the requirements of CID A-A-59350 and are subject to strict material restrictions, including a prohibition on the intentional addition of mercury or mercury-containing compounds. The contract specifies a delivery lead time of 20 days with a need ship date of October 28, 2026, and a required delivery date of December 3, 2026. Delivery is FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The procurement includes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All wooden pallets must be heat-treated and IPPC stamped to ensure they are pest-free for overseas shipment, as failure to comply will result in the rejection of materials. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Certified HUBZone small business concerns may receive a price evaluation preference under FAR 52.219-4.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0367

This solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment office, is for the procurement of five cartons of welding rods under NSN 3439-00-262-4285. The specified material consists of rods measuring 3/16 inch in diameter and 39 inches in length, with each carton weighing 2 lbs. Delivery is required within 10 days after receipt of the order, with the place of performance and delivery located at Fort Riley, Kansas. The contract is established as FOB Origin and requires destination inspection and acceptance. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Specific attention is required for magnesium alloy rods containing radioactive thorium, which must bear appropriate radiation warning labels. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and reporting, as well as adherence to DFARS regulations regarding safeguarding covered defense information and cyber incident reporting.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0455

Solicitation SPE8E6-27-T-0455 is a procurement request by the Defense Logistics Agency for welding rods under NSN 3439-00-008-5067. The requirement is for four units, with each unit consisting of 10 pounds of rods measuring 0.045 inches in diameter and 36 inches in length. The items must be delivered to Fort Riley, Kansas, with a required delivery date of October 23, 2026, and a delivery window of 10 days after receipt of order. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, and follow DLA packaging requirements for procurement (RP001). All quotes must be submitted through the DLA Internet Bid Board System (DIBBS). The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Invoicing and payment must be processed electronically via the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → Network Contract Office 23 (36C263)

Same awarding agency

JLG Replacement Decals and Manuals SupplierThis subcontract involves the procurement of OEM-compliant parts for prime contractors working on Department of Veterans Affairs facility projects. The scope of work requires the sourcing and delivery of a replacement basket display decal, operator manuals, and ANSI manuals specifically for a JLG Boom Lift Model 600S. All provided materials must strictly adhere to manufacturer specifications and ANSI standards. Managed by the Network Contract Office 23, the contract is categorized under NAICS code 423840. The physical delivery of the decals and technical manuals will support operations in St. Cloud, Minnesota. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Heavy Equipment Hauling (Boom Lift)This subcontract involves the transportation of a JLG Boom Lift Model 600S for prime contractors working on Department of Veterans Affairs facility projects. The selected provider will be responsible for loading and hauling the equipment between the St. Cloud VA campus and the designated repair facility using a flatbed trailer or equipment hauler. All transport must adhere to DOT-standard securement protocols to ensure the equipment is delivered safely to and from the site. To qualify for this engagement, the contractor must possess a valid Commercial Driver's License and maintain appropriate transport insurance. The project falls under NAICS code 484220 and is managed through the Network Contract Office 23. Interested parties must submit their responses by November 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

JLG Boom Lift Hydraulic System Repair and MaintenanceThis subcontract involves providing specialized hydraulic system repairs for a JLG Boom Lift Model 600S located in St. Cloud, Minnesota, supporting prime contractors on Department of Veterans Affairs facility projects. The scope of work includes replacing hydraulic hoses through the cat track and the hydraulic line from the pump to the block, performing full hydraulic oil replacements, and conducting diagnostic testing to ensure the equipment meets manufacturer standards. The contractor is required to utilize manufacturer-approved parts and professional hydraulic diagnostic tools to deliver a fully operational boom lift. This project falls under NAICS code 811310 and is managed through the Network Contract Office 23 for the Department of Veterans Affairs.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

J039--JLG Boom Lift Hydraulic Leak Repairs - STC (VA-27-00010304)

Solicitation # 36C26327Q0084

The Department of Veterans Affairs, Network Contracting Office 23, is issuing a sources sought notice for market research to identify qualified contractors for hydraulic repairs on a JLG Boom Lift, Model 600S, at the St. Cloud VA Health Care System in Minnesota. Under NAICS code 811310, the required services include replacing all hydraulic hoses through the cat track, replacing the hydraulic line from the pump to the block, replacing hydraulic oils, and updating the basket display decal and operator and ANSI manuals. The selected contractor must be located within a 100-mile radius and will be responsible for the pickup and delivery of the equipment to and from the St. Cloud VA campus. All repairs must be completed within three weeks of the contract award and must meet industry and manufacturer operational standards. This notice is not a formal solicitation and does not obligate the government to award a contract. Interested parties must submit their company information, including DUNS and SAM Unique Entity ID, a capability statement, and their socio-economic size classification to Contract Specialist Evan Beachy by 4:00 PM Central Time on November 04, 2026. Additionally, respondents should specify if the procurement can be handled through GSA, FSS, SEWP, or other existing contract vehicles. Responses are intended solely for planning purposes to help the government make informed acquisition decisions.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

J065--Karl Storz Support Services IDIQ VISN

Solicitation # 36C26327Q0022

The Department of Veterans Affairs Network Contracting Office 23 is soliciting a brand-name only, five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract for OEM-certified support and service of Karl Storz OR1 Video Integration Systems across the VISN 23 Healthcare System. This requirement, managed under simplified acquisition procedures, covers multiple locations including Minneapolis, St. Cloud, Fargo, Central Iowa, Iowa City, Black Hills, and Sioux Falls. The scope of work includes preventive and corrective maintenance, replacement parts, software and firmware updates, cybersecurity compliance, and technical training for clinical and biomedical staff. The contract has a guaranteed minimum value of 300,000 dollars and a maximum lifetime cost limitation of 5,600,000 dollars. Award will be based on a comparative evaluation of price and technical factors, including vendor qualifications, cybersecurity capabilities, and service level agreement response times. The contractor must adhere to strict OEM standards, NIST calibration requirements, and VA security policies, including the submission of cybersecurity artifacts and a signed Business Associate Agreement for HIPAA compliance. Performance will be monitored via a Quality Assurance Surveillance Plan targeting 98.9 percent operational uptime and 99 percent response time rates. Offers are due by November 11, 2026, and must include a signed SF 1449, completed pricing schedules, and proof of OEM certification for technicians.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Replace Operating Room 5 Flooring

Solicitation # 36C26327Q0019

Solicitation 36C26327Q0019 is a Service-Disabled Veteran-Owned Small Business set-aside for the Department of Veterans Affairs, Network Contracting Office 23. The project involves providing all labor, materials, tools, and supervision to remove and replace the flooring and subflooring in Operating Room 5 (Room 4211, Building 1W) at the Des Moines VA Medical Center in Iowa. The work must be completed within 120 calendar days following the Notice to Proceed. Award will be granted to the responsible, eligible quoter who submits the lowest-priced acceptable quotation that meets all solicitation requirements, provided the price is determined to be fair and reasonable. Key technical requirements include conducting asbestos survey testing, adhering to the Architectural Design Manual, and utilizing certified installers through INSTALL or a comparable four-year apprenticeship program. The contractor must provide a floor tile mockup of 100 square feet to establish quality standards and comply with strict packaging and marking regulations for asbestos waste and HEPA filters. Administrative requirements include the submission of an Accident Prevention Plan and Site-specific Safety Plan for COR approval, as well as the provision of payment bonds or irrevocable letters of credit for contracts exceeding 35,000 dollars. The contract is subject to the Davis-Bacon Act and Buy American requirements, with specific limitations on subcontracting to ensure a minimum of 15 percent of the work is performed by the prime SDVOSB contractor.

Flooring Contractors

POSTED

DEADLINE

Heavy Equipment Freight Delivery (FOB Destination)This subcontract, managed by the Department of Veterans Affairs Network Contract Office 23, involves the FOB Destination transport of industrial modular sections for medical clinic projects. The contractor is responsible for hauling equipment from the manufacturer to the Minneapolis VA Medical Clinic, ensuring all deliveries are made safely to the facility loading dock. A critical requirement of the agreement is the coordination of delivery to ensure that no single component exceeds 2,000 lbs to maintain compatibility with the loading dock. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Keckley Duplex Basket Strainer SupplierThis subcontract opportunity, managed by the Department of Veterans Affairs Network Contract Office 23, seeks a supplier to provide a brand-name Keckley industrial duplex basket strainer and associated gaskets, or approved equals. The equipment must meet Class 125 butterfly valve specifications and be capable of operating at 150 degrees Fahrenheit at 20 inches. These materials are intended for use by prime contractors working on medical clinic projects located in Minneapolis, Minnesota. The procurement is designated as a Total Small Business Set Aside under NAICS code 423830. Interested parties must submit their responses by October 30, 2026, at 3:00 PM. The scope of delivery is limited to one duplex basket strainer and the corresponding gaskets, specifically referencing Keckley part numbers 2RFFD-FCS125P34-920 and FT-920-Gasket.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

4120--SPECIAL Duplex Strainer - MPLS

Solicitation # 36C26327Q0054_0001

Solicitation 36C26327Q0054 is a small business set-aside procurement issued by the Department of Veterans Affairs Network Contracting Office 23 for a duplex strainer to be delivered to the Minneapolis VA Medical Clinic. The requirement is designated as Brand Name or Equal, specifically targeting the Keckley Duplex Basket Strainer, including part numbers P/N2RFFD-FCS125P34-920 and FT-920-Gasket. Offerors providing the exact Keckley brand name items are not required to provide additional technical data, while those proposing equal products must confirm that all salient characteristics are met. The procurement falls under NAICS code 333415, with a size standard of 1,250 employees. Key technical and delivery constraints include a maximum component weight of 2,000 lbs to ensure compatibility with the VA loading dock and equipment. Delivery is required as FOB destination. The contract incorporates FAR 52.219-33 regarding the Nonmanufacturer Rule for vendors acting as resellers. This specific amendment serves to answer vendor questions and requires offerors to acknowledge receipt to remain eligible for consideration. Quotes must be submitted to Robert Bennett by October 30, 2026, at 3:00 PM UTC.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

J045--Glycol Loop Flushing - NWI

Solicitation # 36C26327Q0060

Solicitation 36C26327Q0060 is a firm fixed price request for quotation issued by the Department of Veterans Affairs Network Contracting Office 23 for the flushing, cleaning, and recharging of two closed-loop glycol heating systems, specifically the Surgery and Microbiology loops, at the Omaha VA Medical Center. The project requires the contractor to provide all labor, materials, equipment, and disposal handling to restore the systems to a stable operating condition using propylene glycol-based heat transfer fluid. The anticipated period of performance runs from November 1, 2026, to October 31, 2027, with the initial service required within 30 calendar days of award and a second identical service performed approximately 12 months later. Work must be conducted during normal business hours when temperatures exceed 40 degrees Fahrenheit and must comply with NFPA-99, ASHRAE 170, CMS, JCAHO, and VA HVAC Design Manual standards. This procurement is a total set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with strict limitations prohibiting the contractor from paying more than 50 percent of the government-paid amount to non-certified SDVOSB or VOSB firms. Award will be based on a comparative evaluation of price, technical quality, past performance, and veterans involvement. Key deliverables include pre-flush fluid sampling reports, system volume calculations, refractometer readings, and disposal manifests. Following Amendment 0001, the response deadline has been extended to November 10, 2026. Proposals must be submitted electronically to the contracting officer and include separate volumes for administrative documents, technical and past performance narratives, a subcontracting statement, and a labor standards statement confirming compliance with Service Contract Labor Standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Thyroid Uptake System Annual Support ServicesThe Thyroid Uptake System Annual Support Services subcontract, issued by the Department of Veterans Affairs Network Contract Office 23, seeks a provider to deliver comprehensive technical support and maintenance for prime contractors. The scope of work includes help desk support, technical assistance, preventative maintenance, and corrective repairs for the Thyroid Uptake System to ensure continuous operational functionality. This one-year engagement requires the deployment of manufacturer-certified technicians to manage system support and warranty obligations. Interested parties should note the response deadline of October 29, 2026, for this specialized service contract categorized under NAICS code 811219.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 9 hours

Nuclear Medicine Equipment Installation and Training ServicesThis subcontract for Nuclear Medicine Equipment Installation and Training Services involves the physical installation and clinical implementation of a Thyroid Uptake System at the Iowa City VA Healthcare System. The scope of work includes configuring the DICOM interface with the facility network and providing comprehensive operation and safety training for Nuclear Medicine personnel to ensure a fully operational system and a qualified staff. Managed by the Department of Veterans Affairs Network Contract Office 23, the project requires personnel specifically qualified to calibrate nuclear medicine diagnostic equipment. The opportunity was posted on October 22, 2026, with a response deadline of October 29, 2026, falling under NAICS code 811219.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 9 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

Commercial Digital Scales Supply

Dcso Philadelphia

POSTED

CLOSED

Vacuum System and Ion Pump Supply

Department Of Commerce Nist

POSTED

CLOSED

over 1 year ago

KC-46 Engine Change System Manufacturing

FA8126 Afsc Pzimb

POSTED

CLOSED

Pre-Inking Mechanism Fabrication

Office Of The Chief Procurement Officer

POSTED

CLOSED

Nitrogen (HON) Option Supply

DCSO-COLUMBUS-DIVISION-2

POSTED

CLOSED

Argon Purifier Supply (SIRCAL Option)

DCSO-COLUMBUS-DIVISION-2

POSTED

CLOSED

Specialized Equipment or Service (Line 1HC54)

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

BRAZING ALLOY,SILVE

Solicitation # N0010426QFE09

Navsup Weapon Systems Support Mech

POSTED

CLOSED

34--WELDING QUALIFICATI

Solicitation # SPE8E526T2674

DLA Troop Support

POSTED

DEADLINE

34--WELDING MACHINE,STU

Solicitation # SPE8E526T2899

DLA Troop Support

POSTED

CLOSED

High-Pressure Coolant System Integration

Naval Surface Warfare Center

POSTED

CLOSED

Bar Feeder System Supply and Integration

W6QK Acc-apg Cont Ct Tyad Ofc

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS