Wheeled Crane AMD 0001: NAICS/PSC Update

The contract specifies the procurement of a wheeled crane with stringent technical requirements, including a 3.8L Cummins diesel engine generating at least 130 horsepower at 2500 rpm and 360 foot-pounds of torque at 1600 rpm, with no requirement for diesel exhaust fluid. The crane must feature a four-cylinder engine, conventional coolant system, Powershift 4-speed forward and 3-speed reverse transmission, and a 4-wheel drive setup with rigid axles, planetary hubs, and limited slip differentials. It must be equipped with 385/65R22.5 high traction radial tires, 4-wheel full hydraulic wet disc brakes for service and a mechanically applied disc parking brake on the front axle, and a 4-wheel steering system offering selectable circle, crab, and front-wheel modes. The hydraulic system must include a single load-sensing axial piston pump and a reservoir with a visible fluid level sight glass, while the crane must have a full LED lighting package. The counterweight must be a one-piece cast unit bolted to the turntable. The operator’s station is to be a chassis-mounted cab with roof safety glass, deluxe seat, air conditioning and heating, dash-mounted mechanical lever proportional controls, electric horn, engine gauges, fire extinguisher, bubble level, and 360-degree continuous rotation via worm and gear drive on a ball bearing swing circle, accompanied by a back-up camera, 360-degree swing lock, and back-up alarm. Outriggers must be oblique type with nylon wear pads and independent hydraulic holding valves at all four corners. The solicitation number is W911S226U3393 under NAICS code 333120 for wheeled crane manufacturing and is designated as a Total Small Business Set-Aside. It was posted on June 22, 2026, with proposals due by June 25, 2026 at 5:00 PM. The issuing agency is the Department of Defense, specifically the Office at Fort Drum, New York, with James Ferraro listed as the primary point of contact. The place of performance is listed with a zip code of 65473, though the city and state are unspecified. All bids must comply fully with the outlined technical specifications to be considered eligible for award.