Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE, ELECTRICAL

Active
SPE7M1-26-T-246SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of 2,000 feet of electrical wire in two continuous 500-foot spools, with the NSN part number 6145-01-384-4306, under solicitation SPE7M1-26-T-246S. The delivery schedule mandates fulfillment within 292 days after order placement, and all supplies must comply with DLA packaging requirements and technical/quality standards outlined in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. For simplified acquisitions, the applicable revision of the master list is determined by the solicitation issue or award date, while larger acquisitions adhere to the RFP issue date unless revised by an amendment. The contractor must ensure all non-accepted supplies have government identification removed prior to delivery. No data is currently available for the item, so the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under NAICS code 331318, managed by the Department of Defense’s Maritime Supply Chain through the DLA office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Alisha Blanton, reachable via email and phone.

General Info

Supply 2,000 feet of electrical wire in two 500-foot spools, NSN 6145-01-384-4306, deliver within 292 days to New Cumberland, PA.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-246S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
WIRE, ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
500 FT/SPOOL, ONE CONTINUOUS LENGTH
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6145-01-384-4306 Quantity: 2,000 FT Purchase Request: 7017697482QTY: 2000 Delivery: 292 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
Magnet Wire Manufacturing & SupplyThe contract calls for the manufacture and delivery of ten reels of No. 15 AWG electrical magnet wire, with each reel containing exactly 75 pounds of continuous-length wire, fully compliant with NEMA MW1000 and DLA Master List standards. The material must meet stringent technical and quality requirements to ensure performance in demanding electromagnetic applications, likely for defense or aerospace systems. All deliveries are to be made to Hill Air Force Base, Utah, with a ZIP code of 84056-5734 specified as the place of performance. This is a subcontract under the Department of Defense, managed by the Maritime Supply Chain agency, classified under NAICS code 331318 for other electrical equipment and component manufacturing. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. While no set-aside details or point of contact information are provided, bidders must adhere to the designated specifications and timelines, with full compliance required for contract award consideration. The official solicitation can be accessed through the provided DIBBS link.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-246B
This contract is for the procurement of magnet wire, specifically 10 reels of No. 15 AWG electrical wire, with each reel containing 75 pounds of continuous length. The material must conform to NEMA MW1000 standards and the technical specifications outlined in the DLA Master List of Technical and Quality Requirements, referenced by an R or I number. The wire must be furnished in a single continuous length, and packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking adhering to MIL-STD-129 and palletization following DLA packaging guidelines. The unit of issue is RL, and no multiple unit packs are permitted if the advice code is 2N, 28, or 34; however, multiple unit packs are acceptable under advice codes 2P or 39, with the advice code overriding any conflicting schedule details. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware, except for specified exceptions such as functional uses in batteries, instruments, or chemical reagents authorized by NAVSEA, with portable devices containing mercury required to be shockproof and have a secondary containment barrier in accordance with NAVSEA 5100-003D. Delivery is required FOB origin within 158 days of contract award, with inspection and acceptance occurring at the destination. The quantity variance is fixed at plus or minus 0 percent, and the NSN is 6145009377862, with the part number MW016CHX000015UNC. The contract is issued under solicitation SPE7M1-26-T-246B with a full and open competition, and the delivery destination is the DLA Distribution Depot Hill in Hill AFB, Utah. The wire must be delivered by January 19, 2027, with an original required delivery date of December 15, 2026. Transportation responsibilities and procedures are governed by DLAD Proc Notes C19 and C20. The contract was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 331318. The primary point of contact is Alisha Blanton of the Department of Defense
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M2-26-T-5947
The contract covers the procurement of electrical power cable with NSN 6145-01-203-5391, requiring 197 linear feet delivered in compliance with MIL-DTL-24643/15G and MIL-DTL-24643D specifications, with part numbers M24643/15-10UN and LSDSGU-300. The cable must be supplied in 800-foot reels and conform to qualified products or manufacturers lists as it is designated as a primary QPL/QML item. Strict prohibitions against intentional addition or direct contact of mercury or mercury compounds apply, except for specific approved uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-12000, with marking following MIL-STD-129 and no special marking required. Delivery is FOB origin with a 165-day lead time, targeting a ship date of January 26, 2027, and original delivery due by March 27, 2027, with a permissible quantity variance of plus or minus 5 percent. Inspection and acceptance occur at destination, and all materials must be furnished under full and open competition. The unit of issue is feet, with the purchase request number 7017685244 under contract SPE7M2-26-T-5947. The deliver-to address is the DLA Distribution facility in New Cumberland, Pennsylvania, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via the official DLA portal, with the applicable revision determined by the solicitation or award date depending on acquisition size.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M2-26-T-5877
This contract specifies the procurement of 6,257 feet of electrical power cable under NSN 6145012019516, with a delivery requirement of 168 days and FOB origin terms. The cable must be furnished in continuous length as dictated by the applicable advice code, with packaging required to comply with MIL-STD-2073-1E and DLA’s packaging standards, including palletization and marking per MIL-STD-129. The product must adhere to the technical requirements outlined in MIL-DTL-24643/20G and MIL-DTL-24643D, and is subject to qualified product or manufacturer listing. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed unless specified otherwise. Mercury and mercury compounds are strictly prohibited unless used in approved applications such as batteries, fluorescent lamps, sensors, or chemical reagents, with portable mercury-containing items requiring shockproof design and secondary containment per NAVSEA 5100-003D. The use of ozone-depleting substances in any phase of production or cleaning is prohibited without explicit written approval from the contracting officer, unless the item qualifies as a commercial item or part-numbered component. All deliveries are to be shipped to the DLA Distribution facility in New Cumberland, PA, with an original required delivery date of June 6, 2028, and a need ship date of January 26, 2027. The contract includes a 5% quantity variance tolerance and mandates individual repair parts ordering data packaging requirements. This is a total small business set-aside under NAICS code 331318, solicited under contract SPE7M2-26-T-5877, with inspections and acceptances occurring at destination.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M0-26-T-011M
The contract is for the procurement of one sediment strainer (NSN 4730-01-239-3765, part number 055802) under a small business total set-aside solicitation (SPE7M0-26-T-011M), issued by the Department of Defense’s Maritime Supply Chain ESOC Buys. Delivery is required within five days of order placement, with FOB origin terms meaning title and risk transfer to the government upon release from the contractor’s facility. The item must be packaged in accordance with MIL-STD-2073-1E using bags compliant with MIL-B-117, preserved using preservation method code 32 (CLNG/DRY: 1), and marked following MIL-STD-129 with no special marking required. The delivery address is the Southwest Regional Maintenance Center in San Diego, California, where the government conducts both inspection and acceptance. Hazardous materials handling is strictly regulated: mercury or mercury-containing compounds are prohibited unless part of exempted components such as batteries, fluorescent lamps, or sensors, with portable mercury-containing devices required to be shock-proof and have a secondary containment barrier per NAVSEA 5100-003D. All shipping must occur via traceable freight methods, explicitly prohibiting parcel post. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including requirements for combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards under NIST SP 800-171, and reporting of cyber incidents within 72 hours. It also mandates compliance with restrictions on toxic substances like hexavalent chromium and the prohibition of procurement from Communist Chinese military companies. Payment is processed via Wide Area WorkFlow (WAWF), with electronic invoicing required as a fixed-price item. The contractor must maintain compliance with all safety, security, and labeling standards, and all representations regarding small business status, unique entity identifier, and socioeconomic certifications must be current in SAM.gov. Transportation by sea, if applicable, requires use of U.S.-flagged vessels unless a waiver is obtained in advance.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

4 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M2-26-T-5895
This contract solicits 15,352 feet of power and electrical cable under solicitation number SPE7M2-26-T-5895, with a delivery requirement of 168 days from award and shipment FOB origin. The cable must meet technical specifications outlined in MIL-DTL-24643/48G and MIL-DTL-24643D, with approved part numbers M24643/48-01UN and LSDNW-3, and must be furnished in continuous length based on applicable advice codes 2N, 28, 34, 2P, or 39, with packaging and preservation strictly compliant with MIL-STD-2073-1E and MIL-DTL-12000. All items must be marked per MIL-STD-129 with no special marking code applied, and palletization must adhere to DLA packaging requirements. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or instruments, and any such exempted items must include secondary containment as defined by NAVSEA 5100-003D. The contract allows full and open competition and permits only manufacturer part numbers listed on the Qualified Products List at the time of award. Quantity may vary by plus or minus five percent, with inspection and acceptance occurring at destination. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and the need ship date is January 26, 2027. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or amendment date depending on acquisition size. Unit of issue is feet, and the NSN is 6145-01-202-3513.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-243Q
This contract calls for the supply of electrical wire, identified by NSN 6145-00-836-0510, with a total quantity of 17,500 feet divided into two line items: 6,000 feet and 11,500 feet, to be delivered within 56 days from the need ship dates of December 7, 2026, and August 11, 2026, respectively. The wire must conform to the technical specifications outlined in SAE AS22759/11A Revision A and SAE AS22759E Revision E, with configuration controlled under TDP Rev B Gen 2, and must be furnished in continuous length depending on the advice code, which supersedes any conflicting schedule terms. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the wire, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must meet shockproof and secondary containment standards per NAVSEA 5100-003D. The item is subject to the Qualified Products List or Qualified Manufacturers List, and full and open competition applies. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking per MIL-STD-129 and palletization per DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance at destination, and a 5% quantity variance is permitted. The wire must be shipped to two distinct DLA distribution centers: Tinker AFB, Oklahoma, and Robins AFB, Georgia, with all documentation adhering to DLA’s authorized unit of issue standards.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
Precision Spring Manufacturing and DeliveryThe contract calls for the manufacture and delivery of a helical extension spring identified by NSN 5360-01-281-5109, requiring strict compliance with applicable military specifications to ensure performance, durability, and safety standards. The scope includes all aspects of production, quality control, packaging, and labeling in accordance with defense requirements, with special attention to hazardous materials documentation to meet regulatory and transportation safety protocols. The item must be prepared for shipment to an FPO address with ZIP code 96661, ensuring proper handling and delivery through military logistics channels. The solicitation, posted on July 29, 2026, with a response deadline of August 10, 2026, is classified as a subcontract under NAICS code 331318, indicating involvement in the manufacturing of other spring and wire product industries. The contracting organization is the Department of Defense, specifically under the LAND SUPPLY CHAIN office, and the procurement is managed through the DLA’s DIBBS system. Participation requires full adherence to defense contracting standards, accurate identification of the NSN, and the ability to meet delivery timelines for international military distribution. All documentation, from material certifications to shipping labels, must align with federal and DoD regulatory frameworks.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-238J
This contract solicits electrical wire under NSN 6145-00-107-7913 with a total quantity of 50,500 feet divided into three line items of 500 feet, 12,000 feet, and 38,000 feet respectively, all to be delivered in 500-foot spools. The wire must comply with SAE AS81044 Revision A standards and be preserved and packaged in accordance with MIL-DTL-12000 and MIL-STD-2073-1E, with marking strictly following MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited in the wire, its preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or Navy-specified reagents, and portable devices containing mercury must include a secondary containment barrier. The contract requires full and open competition, and the product must be sourced from qualified manufacturers listed on the QPL or QML. Packaging must adhere to DLA’s RP001 standards, with palletization and shipment instructions governed by specific DLA procedures. Delivery is FOB origin with a 69-day timeline and allowable quantity variance of plus or minus 5 percent. Inspection and acceptance occur at the destination, and shipment must be directed to one of three DLA distribution centers located in Utah, California, or Pennsylvania. A specific advice code governs whether continuous length or multiple unit packs are acceptable, and if conflicting with the schedule, the advice code takes precedence. All specifications reference the latest revisions of applicable standards, and the contract requires strict compliance with configuration change management and variance request protocols. The original delivery deadline is December 15, 2026, with a need ship date of July 23, 2026.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-T-889D
This contract solicits a single helical extension spring with NSN 5360-01-281-5109 under solicitation number SPE7L1-26-T-889D, with a required delivery within 20 days of award. The item is procured by the Department of Defense through the Land Supply Chain for a federal acquisition, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents authorized by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. Non-accepted supplies must have all government identification removed prior to return, and compliance with these restrictions is mandatory for contract fulfillment. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the point of contact is Kristina Derry at DLA, reachable via phone or email provided for inquiries relating to the procurement.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
CABLE, SPECIAL PURPOSE,
Solicitation # SPE7M1-26-T-238K
This contract specifies the procurement of 3,500 feet of special purpose electrical cable identified by NSN 6145-01-331-9802, required to meet the technical and quality standards outlined in SAE AS85485/12 Revision B dated 05/01/2016 and referenced in DLA’s Master List of Technical and Quality Requirements. The cable must be supplied in continuous length depending on the advice code, with multiple unit packs prohibited if the code is 2N, 28, or 34, but permitted if the code is 2P or 39, and the advice code prevails over any conflicting schedule information. It is a critical application item and must originate from a qualified manufacturer listed on the Qualified Products List or Qualified Manufacturers List. Packaging must comply with ASTM D3951 and MIL-STD-129, with unit packs of 500 feet per spool, and palletization governed by DLA’s packaging requirements. Delivery is FOB origin with a 5% quantity variance allowed, inspection and acceptance occurring at the destination, and the delivery window is 161 days from contract award. The original required delivery date is November 9, 2026, with a need ship date of January 19, 2027, and shipping is directed to DLA Distribution Cherry Point in North Carolina. Full and open competition applies, and the contract is governed under solicitation SPE7M1-26-T-238K with a response deadline of August 10, 2026.
MARITIME SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7L3-26-T-137R
This contract specifies the procurement of 131 helical extension springs with NSN 5360-01-322-8631 and part number 114250-66200 supplied by Star Power Services Inc and Yanmar America Corporation. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Packaging must conform to MIL-STD-2073-1E with specific preservation methods including dry air packaging and designated container types, and marking must follow MIL-STD-129 without special marking codes. The springs must be delivered FOB origin to Arizona Industries for the Blind in Phoenix, Arizona, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and delivery is required within 119 days from the award date, with a firm ship date of December 8, 2026 and original delivery deadline of February 21, 2027. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware except in approved exceptions such as batteries or sensors, and any portable devices containing mercury must include shockproof construction and secondary containment as per NAVSEA 5100-003D. Sampling for quality verification shall adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated in the contract, and critical attributes are assigned verification level VII with an AQL of 0.1. All transportation and shipping details are governed by DLAD procedural notes C19 and C20.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335312
New
DIBBS
ENCODER, SHAFT ANGLE
Solicitation # SPE7M1-26-T-246P
The contract pertains to the procurement of seven shaft angle encoders identified by NSN 5990-01-672-5924 and part number F181869-20 from LAKE SHORE SYSTEMS, INC. Delivery is required FOB origin within 264 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence and dictate final compliance standards. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value of $49.00 at $7.00 per unit. The required ship date and original delivery date are both May 6, 2027. The contract is governed under solicitation SPE7M1-26-T-246P, issued under the NAICS code 335312 by the Department of Defense's Maritime Supply Chain. Transportation and freight shipping instructions reference specific DLA procedural notes C19 and C20, and all documentation must align with the DLA’s authorized unit of issue standards. The point of contact for the solicitation is Joseph Madjecki, reachable via phone and email provided.
Motor and Generator Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-246T
The contract pertains to the procurement of three electromagnetic relays with NSN 5945-01-088-1822 under solicitation SPE7M1-26-T-246T, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on August 14, 2026. The item is subject to stringent export controls under either ITAR or EAR, prohibiting any transfer, including disclosure to foreign persons within or outside the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this technical data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on DOD export-controlled data handling, and approved questionnaire submissions are permitted access. The contracting entity must also maintain CMMC Level 2 certification through a certified third-party assessment organization and comply with all DLA packaging and cybersecurity requirements. Point of contact for inquiries is Corin Loper, and the solicitation is available via the DIBBS portal.
Relay and Industrial Control Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M1-26-Q-1324
The contract pertains to the procurement of an Axle, Shouldered, identified by NSN 3040-00-479-3932 and part number 416540-1, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). It requires strict adherence to serialization and traceability protocols, with each part and its packaging must be marked with the part number, serial number, contractor CAGE code, and actual manufacturer CAGE code, in compliance with MIL-STD-129. Re-branding that obscures original OEM markings is prohibited, and all serialized or lot-numbered components, including scrapped material, must be fully accounted for. Source approval is mandatory and must be granted by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit evidence of approval or meet criteria outlined in the NAVICP Source Approval Information Brochure. Only specifically approved manufacturers are eligible, including AERO COMPONENTS, LLC, RELIABLE MANUFACTURING COMPANY, and others listed. The contract enforces rigorous quality and documentation controls under SAE AS9100 standards, requiring Non-Destructive Testing (NDT) accreditation, Quality Conformance Inspection, and Inspection and Acceptance at Origin. The Certificate of Quality Compliance and other CDRLs such as the First Article Testing Report and Production Test and Inspection Report are mandatory, and technical data must align with the referenced TDP rev A drawings and quality assurance provisions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and all attributes are assigned specific verification levels or AQLs. The item must be free from intentional mercury compounds and Class I ozone-depleting chemicals, with exceptions strictly defined. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), and markings must include the contract number, NAWC CAGE code, and part number unless drawings specify otherwise. Delivery is scheduled for 378 days after delivery order, with FOB Origin, and the government has explicitly stated that surplus items are not acceptable. Unique Identification is not required per customer request, though traceability through serialization remains critical.

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M1-26-T-246U
The contract specifies the procurement of a starter motor with part number CR306B004ZABB and NSN 6110012999272, requiring one unit to be delivered within 20 days FOB destination. Strict prohibitions are in place against the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements while maintaining all product performance standards; alternative chemicals require prior approval unless explicitly authorized. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application item and must be shipped by the fastest traceable means—parcel post is prohibited—with delivery directed to the USNS COMFORT at FPO AE 09566. The solicitation is issued under contract number SPE7M1-26-T-246U, with a required delivery date of July 29, 2026, and incorporates technical and quality requirements from the DLA Master List, governing revisions based on the acquisition type and timeline. The unit of issue is EA, and the contract is managed by the Department of Defense under the Maritime Supply Chain organization.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7M1-26-T-246K
The contract pertains to the procurement of one gate valve identified by NSN 4820014831523 and part number 1305-016-200 from Milwaukee Valve Co. Inc., with a required delivery within five days of the contract date and FOB destination terms. The item must comply with all DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging, cushioning, containment, and marking standards compliant with MIL-STD-129, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery destination is the SRF-JRMC Yokosuka Naval Base in Japan, with a required delivery date of July 31, 2026, and zero variance allowed in quantity. All shipments must adhere to DLA transportation procedures C19 and C20, and the unit of issue is EA as defined by the DoD authorized standard. The solicitation number is SPE7M1-26-T-246K, which incorporates technical and quality requirements from the DLA Master List, and the contract is subject to revision controls based on the acquisition size and amendment dates.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE7M1-26-T-246M
The contract pertains to the procurement of a control panel, specifically identified by NSN 6110-01-673-4656 and part number 453-0033 from ACR ELECTRONICS, INC., with a total quantity of 34 units to be delivered within 183 days. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging guidelines under MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere to DLA’s procurement requirements, with specific handling instructions including dry preservation, E5 unit containers, and shockproof containment for any incidental mercury-containing components, as authorized only under narrow exceptions defined by NAVSEA. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and no intentional addition of mercury or its compounds is permitted unless explicitly exempted. Delivery is FOB origin with zero variance in quantity, inspection and acceptance occurring at the destination, with the shipment directed to DLA Distribution Depot Oklahoma at Tinker AFB. The purchase is part of a total small business set-aside under NAICS code 335314, with the original required delivery date of March 7, 2027, and a need ship date of February 14, 2027. Pricing is fixed at $34.00 per unit for a total contract value of $1,156.
Relay and Industrial Control Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, CHIP, FIXED
Solicitation # SPE7M1-26-T-246W
The contract specifies the procurement of 2 fixed chip resistors with NSN 5905-01-611-0811 under solicitation SPE7M1-26-T-246W, requiring delivery within 80 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and unit packaging codes, with all marking adhering to MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on each individual unit pack. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and includes detailed parcel post and shipping instructions. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions. The resistors are supplied by Northrop Grumman Systems Corporation and State of the Art, Inc., under their respective part numbers, and the contract mandates compliance with DLA transport and freight procedures as noted in DLAD Proc Notes C19 and C20. The original delivery deadline is December 27, 2026, with a needed ship date of November 3, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M1-26-T-246L
The contract specifies the procurement of a variable wire wound resistor, nonprecision, identified by NSN 5905-00-764-0416 and part number M22/01-00211UB, with a required quantity of six units to be delivered within 16 days after issuance of the purchase request. The item must comply with MIL-PRF-22/1D and MIL-PRF-22E(Sup 1A) technical specifications and is designated as a critical application item, requiring adherence to strict quality and performance standards. The contractor must source components from qualified products or manufacturers lists as defined by applicable procurement notes, and all units must bear lead finish markings per IPC/JEDEC J-STD-609, clearly identifying lead content on each individual unit package. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with special code ZZ addressing additional requirements. The contract strictly prohibits the use of class I ozone-depleting substances in any phase of manufacturing or processing unless written approval is obtained from the contracting officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its contact surfaces, with limited exceptions for functional uses in defined applications such as specific batteries, lighting, sensors, or chemical reagents approved by NAVSEA. Portable mercury-containing devices must be shockproof with secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring upon arrival. The unit price is $6.00 per unit, total value is $36.00, and the contract includes no quantity variance. The solicitation was issued under contract number SPE7M1-26-T-246L, with a response deadline of August 14, 2026, and an original required delivery date of April 12, 2026. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331420
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M1-26-T-246V
This contract is for the procurement of 1,500 feet of electrical power cable identified by NSN 6145014748444, with the specific part number M27500B16WR4U00, manufactured to meet NEMA WC 27500-2025 Revision NR dated 01/01/2025. The cable must be supplied in continuous length as dictated by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering to all higher-priority requirements listed in the DLA Master List of Technical and Quality Requirements. Packaging must be palletized according to RP001, with a unit of issue of 500 feet per pack, and the total quantity is subject to a plus or minus 5% variance. Delivery is required FOB origin within 210 days, with inspection and acceptance occurring at the destination, and the specified delivery point is DLA Distribution Warner Robins, Robins AFB, Georgia. The cable is sourced from a qualified products list, and full and open competition applies, with no exceptions permitted under the specified technical standard. The solicitation number is SPE7M1-26-T-246V, issued by the Department of Defense under the Maritime Supply Chain organization, with a response deadline of August 14, 2026, and a posted date of August 3, 2026. Performance is mandated at Robins AFB, GA, and the contract includes stringent configuration control through Engineering Change Proposal and variance request protocols. Any deviation from technical or quality specifications must be formally requested and approved. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue must align with the official DoD and ANSI X12 standards provided by the DLA. The point of contact for inquiries is Alisha Blanton, and all documentation referenced, including packaging, shipping, and technical compliance, must be strictly followed to ensure contract fulfillment.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-246N
The contract pertains to the procurement of a Filter Element, Flui with NSN 4330-01-544-3410 and part number SO-636CM furnished by Parker Hannifin Corp. A total quantity of 107 units is required at a unit price of $107.00, resulting in a total contract value of $11,449.00. Delivery is to be made FOB origin within 139 days from the original required delivery date of January 1, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as a critical application with no shelf life requirement. All packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling per MIL-STD-129 and palletization in accordance with RP001. The unit of issue is each (EA), and the packaging configuration must align precisely with the contract-specified QUP. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for freight shipping. Transportation instructions are governed by DLAD Proc Notes C19 and C20. This solicitation, identified as SPE7M1-26-T-246N, was issued on August 3, 2026, with a response deadline of August 14, 2026, and is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333998. The contracting office is part of the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese, reachable via email and phone provided in the contract. All terms and requirements are governed by DLA standards and referenced master lists accessible through the official DLA procurement portal.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7M1-26-T-246Y
The contract is for the procurement of 50 units of SEAL, PLAIN ENCASED, identified by NSN 5330-01-115-7246, under solicitation number SPE7M1-26-T-246Y, with a response deadline of August 14, 2026, and a delivery requirement of 97 days ADO. The item is classified as a commercial item and must be packaged in a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1 specifications, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The product must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision based on solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and covered defense information protocols are enforced. All items must comply with MIL-STD-130N for identification marking, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Maritime Supply Chain, with performance location in New Cumberland, PA, and primary point of contact Gerald Franklin.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details