Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on December 23, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

WPAFB Architect-Engineer Contract, Mechanical/Electrical Projects

Closed
10-1004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541310
New
International
Architectural, design and building consultancy services - Dalby Visitor Centre
Solicitation # FCCN004975
The Forestry Commission is seeking a consultant to provide architectural, design, and building consultancy services for the extension and alteration of the Dalby Visitor Centre in Yorkshire and the Humber. The selected consultant will be responsible for investigating and producing design outputs through RIBA stage 3 to align with Forestry England's requirements. Following this, the consultant will provide expertise in developing the design and build tender scope, reviewing technical drawings, and providing ongoing project management through RIBA stages 4 to 7. Key deliverables include a detailed delivery programme and Gantt chart outlining activities, dependencies, and critical milestones. This open procedure solicitation, reference FCCN004975, has an estimated total value of 150,000 GBP excluding VAT, with some services provided on a time charge basis. The estimated period of performance runs from December 16, 2026, to April 30, 2029. The procurement is identified as particularly suitable for small and medium-sized enterprises and is conducted in compliance with the Procurement Act 2023. Proposals must be submitted electronically by November 13, 2026, and should include details regarding the project team, resource deployment plans, capacity assurance, and strategies for managing subcontractors and maintaining continuity of service.
Forestry Commission

POSTED

about 18 hours ago

DEADLINE

in 24 days

General Info

NAICS

541310 - Architectural Services

Place of Performance

Wright-Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA

Full Description

Show more
Project 10-1004, Indefinite Delivery Contract for FY 10-15 Mechanical/Electrical Projects at Wright-Patterson Air Force Base, Ohio. The scope of the projects will include site visits and investigations, design and economic analysis, construction drawings and specifications, survey of facilities for asbestos containing materials and lead coatings including sampling, testing and abatement design, detailed cost estimates and a bidding schedule for each project. The Architect-Engineer (A-E) shall be required to produce design documents in both electronic and hard copy format; drawings shall be in Microstation (dgn and pdf) formats (3D capability may be required), construction specifications shall be in conformance with the Unified Facility Guide Specifications (UFGS) using SpecsIntact. The significant evaluation factors to be used in the selection process are as follows: (1) Specialized Experience in designing projects of a mechanical/electrical effort i.e., alteration and repair of buildings and structures, HVAC systems and renovation and repair of miscellaneous utilities and infrastructural systems; (2) Professional Qualifications of the staff to be assigned to this project in the architectural, electrical, civil/structural, environmental and mechanical disciplines; (3) Professional Capacity of the A-E firm to accomplish the work within the anticipated schedule; (4) Past Performance of the A-E firm with respect to the execution of DOD and other contracts; (5) Location of the A-E firm in the general geographic area as site visits and Government - A/E firm interaction will be required; (6) Volume of work previously awarded to the A-E firm by DOD with the object of effecting an equitable distribution of DOD contracts among qualified A-E firms; and (7) Project Manager's qualification and experience in the assigned projects under this contract. Performance period will be 365 days from contract award date, with four one-year options. Limits on the contract shall be $1,900,000/contract year for a total contract value of $9,500,000; individual tasts shall be unlimited. A-E firms desiring consideration should register on the "Interested Parties" list by 4-Jan-2010. Following this Sources Sought, a PreSolicitation Notice will be issued in Mid-January 2010 which will explain the submittal process for the SF 330 (Parts I and II). This is not a request for proposal. Interested firms are not to submit any data at this time.

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, acting on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify capable sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are required for the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a fused-silica substrate, a 30 mm diameter, and a parabolic focus at 45 degrees. Technical specifications require an optical surface roughness of less than 1 nm RMS, a 20-10 scratch/dig specification, and polished backsides. The protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40 nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance testing, and documentation, including certificates of conformance and surface-measurement data. Delivery to Wright-Patterson Air Force Base must be completed within 98 calendar days after receipt of order, and the products must be warranted against defects for two years. Payment is structured as 100 percent after delivery with 30 days net terms. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026. This notice is for market research purposes only and does not constitute a solicitation or a commitment to award a contract.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS