Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WRENCH, ROTOR BRAKE

Active
SPE4A6-26-T-08BBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 100 units of a WRENCH, ROTOR BRAKE with NSN 5120-01-245-7976 and part number 70700-77117-041, supplied by SIKORSKY AIRCRAFT CORPORATION and CAMBRIDGE SPECIALTY CO. INC. Delivery is required within 130 days from the contract award, with shipment terms FOB origin and inspection and acceptance occurring at the destination. The item has no shelf life requirement, but must be packaged in compliance with ASTM D3951 and marked and labeled per MIL-STD-129, with palletization following DLA’s RP001 packaging requirements. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute levels must be verified at designated levels. Any configuration changes require an engineering change proposal or variance request, and removal of government identification from non-accepted supplies is prohibited. Casting or forging may be needed for manufacture, and contractors must seek assistance through DLA’s forging and casting portal if special tooling or materials are required. The unit of issue is each, priced at $100.00 per unit for a total of $10,000.00, with no quantity variance permitted. The delivery address is DDSP New Cumberland, Pennsylvania, and transportation requirements must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-08BB, with a response deadline of July 28, 2026, and the original delivery date set for July 20, 2026.

General Info

100 rotor brake wrenches at $100 each, delivered to Pennsylvania by July 20, 2026, per military packaging and inspection standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-08BB for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Mellisa Heise
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WRENCH,ROTOR BRAKE
WRENCH,ROTOR BRAKE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70700-77117-041
CAMBRIDGE SPECIALTY CO. INC. 9E232 P/N 70700-77117-041
SPE4A6-26-T-08BB
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017565807 0001 EA 100.000
NSN/MATERIAL:5120012457976
DELIVERY (IN DAYS):0130
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000
SPE4A6-26-T-08BB
SECTION B
PR: 7017565807 PRLI: 0001 CONT’D
Original Required Delivery Date:07/20/2026
SPE4A6-26-T-08BB NSN/Part Number: 5120-01-245-7976 Quantity: 100 EA Purchase Request: 7017565807QTY: 100 Delivery: 130 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
SLED
Carbide Blades for Snow/Ice RemovalThe contract solicits carbide blades designed for snow and ice removal, issued by the Iowa Department of Transportation under solicitation number 645-DOTRFB-2907-2027. The opportunity is open to state, local, and educational government entities and was posted on July 20, 2026, with a strict response deadline of July 22, 2026, at 6:00 p.m. Eastern Time. The blades are intended for use in winter maintenance operations and must meet specific performance criteria for durability and effectiveness in icy and snowy conditions. All equipment must be delivered and perform within the designated place of performance in Ames, Iowa. Matthew Barker from the Iowa DOT serves as the point of contact, reachable via email at matthew.barker@iowadot.us or by phone at 515-239-1173. Interested parties must submit proposals through the official bid portal linked at the provided uiLink. The solicitation does not specify a set-aside category or NAICS code, indicating open competition without preferential treatment. The Iowa DOT is seeking reliable suppliers capable of delivering high-quality carbide blades that ensure safe and efficient road maintenance during winter weather events.
Transportation

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332216
New
DIBBS
Supply of MIL-Spec Electrical Power CableThe contract requires the manufacture and supply of MIL-DTL-915/8H and MIL-DTL-915G Sup 1A compliant electrical power cable with part number M915/8-TSS-4, to be provided in continuous lengths meeting all federal packaging, marking, and preservation standards. The cable must adhere strictly to the military specifications outlined, ensuring compatibility and reliability for defense-related applications. All materials and production processes must conform to the technical requirements of the referenced MIL specs without deviation. The solicitation is categorized as a subcontract under NAICS code 332216, issued by the Department of Defense through the Maritime Supply Chain organization, with a response deadline of August 4, 2026. The contract is posted on the DIBBS platform and targets suppliers capable of delivering large volumes of certified electrical power cable to federal standards. Though no specific place of performance or point of contact is listed, compliance with all U.S. government procurement regulations and delivery expectations is mandatory. Successful bidders will be expected to demonstrate capacity for consistent quality control, traceability, and timely fulfillment under military supply protocols.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332216
New
DIBBS
Precision Metal Stamping and Component ManufacturingThe contract seeks the manufacture of a precision indicator dial component made from metal materials such as brass, aluminum, or stainless steel, engineered to meet strict military specifications for durability, dimensional accuracy, and operational performance under demanding conditions. Production must adhere to rigorous quality control standards to ensure consistency and reliability in high-stakes defense environments, with all components expected to withstand extreme mechanical stress, temperature variations, and prolonged exposure to harsh conditions without degradation. The work is classified as a subcontract under the NAICS code 332216 for precision stamping and component manufacturing, with performance required at CAMP LEJEUNE, North Carolina, ZIP 28542-0127. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026, indicating an extremely tight turnaround time for qualified suppliers to submit proposals. The contracting entity is the Defense Logistics Agency under the Department of Defense, signaling that the component will support critical military systems or equipment deployed in field operations.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
DIBBS
INSERTER, BEARING ANThe contract pertains to the procurement of one unit of an inserter bearing an unspecified component, identified by NSN 5120-01-521-1302 and part number RST4164, supplied by REXNORD INDUSTRIES, LLC. Delivery is required within five days under FOB origin terms with zero variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, with marking adhering to MIL-STD-129 and no special marking required. Palletization must follow DLA's packaging requirements. The item must be shipped via traceable freight methods, not parcel post, to the freight address in Virginia Beach, with separate parcel post address designated for return or correspondence purposes. The shipment is categorized under RDD 777 and linked to project codes ZF7 TP 1 and BK0 TP 1, with assigned government use identifiers. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Configuration changes require formal engineering change proposals, and deviations or waivers must be formally requested. Technical and quality standards are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by solicitation or award date depending on acquisition type. The required delivery date is July 15, 2026, and the solicitation was issued under contract number SPE4A0-26-T-3969 with a response deadline of July 28, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
WIRE, ELECTRICALThe contract calls for the procurement of 2,000 units of electrical wire, identified by NSN 6145016995909 and part number HP3-EXBFE6, conforming to NEMA-HP3 Revision NR dated 01/01/2021. The wire must be supplied in continuous length, with the specific packaging and shipment requirements dictated by the advice code, which takes precedence over any conflicting schedule information. Delivery is due 139 days after award, with FOB origin terms meaning the government assumes transportation costs and risks from the contractor’s origin point. All items must be packaged in accordance with MIL-STD-2073-1E and preserved per MIL-DTL-12000, with palletization following DLA’s RP001 packaging standards. Marking and labeling must comply strictly with MIL-STD-129, including GS1-compliant barcodes and SSCCs on shipping containers, while special marking code ZZ indicates adherence to additional DLA-specific requirements. The wire must meet technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, incorporated by reference. The contract has a fixed price of $2,000.00, with zero variance allowed on quantity, and payment will be processed through WAWF. The delivery location is the DLA Distribution New Cumberland Facility in Pennsylvania, with inspection and acceptance to occur at destination. The solicitation is open to full and open competition under NAICS code 332216, and contractors must be registered in SAM.gov with a valid UEI and CAGE code. Compliance with numerous FAR and DFARS clauses is required, including those covering cybersecurity safeguards, hazardous material reporting, employment eligibility verification, combating trafficking in persons, and sustainable products, with deviations applied to several clauses. Offerors must submit electronic proposals via DIBBS by the deadline of July 20, 2026, and are subject to provisions ensuring small business participation, equal opportunity, and proper subcontracting practices. No evaluation factors or award basis are explicitly defined, but the low value and simplified nature suggest a potential LPTA methodology.
NUCLEAR REACTOR PROGRAM

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
DIBBS
INDICATOR, DIALThe contract pertains to the procurement of one indicator, dial with NSN 5210-14-351-3623 and part number 1687233011, supplied by Robert Bosch Aust Pty and Robert Bosch France. The item must be delivered within 20 days to Camp Lejeune, North Carolina, FOB origin, with no variance in quantity allowed. Inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 marking and labeling requirements, with palletization following DLA Packaging Requirements for Procurement. All technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over any general standards. The item must be shipped via traceable freight, not parcel post, to the specified distribution management office address, with the unit of issue as a single piece. The required delivery date is February 17, 2026, and the contract is issued under solicitation SPE8E5-26-T-1690, with covered defense information potentially applicable. Documentation for source approval, removal of government identification from non-accepted supplies, and other specified requirements are incorporated by reference. The point of contact for the solicitation is Khue Nguyen of the Defense Logistics Agency, and the contract falls under NAICS code 332216.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
DIBBS
SCALE, WEIGHINGThe contract pertains to the procurement of 372 commercial off-the-shelf weighing scales identified by NSN 6670-01-624-5433, supplied by approved vendors including Apple Valley Scale Company and Dymo Corporation, under solicitation SPE4A5-26-T-295Y. The acquisition is structured as a total small business set-aside with a firm-fixed-price contract valued at $138,384, with no variance allowed in quantity, and delivery required FOB destination to DLA Distribution Red River in Texarkana, Texas. The delivery schedule mandates receipt within 168 days after the order date, with an original required delivery date of September 5, 2026, and a need ship date of January 13, 2027. All items must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including RA001 for technical specifications, RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RT001 for measuring and test equipment. Packaging and marking must conform to MIL-STD-129 for labeling and barcoding, and ASTM D3951 for general packaging, with the DLA requirements taking precedence in case of conflict. Palletization must adhere to RP001 standards. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with a zero-defect acceptance criterion, regardless of whether MIL-STD-105/ASQ Z1.4 is used for sample size determination. The product is subject to compliance with multiple Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses regarding small business representation, combating human trafficking, employment eligibility verification, hazardous material identification, sustainable products, safeguarding covered contractor information systems, NIST SP 800-171 compliance, and subcontracting for commercial products. Payment will be processed exclusively through Wide Area WorkFlow, with invoice submission tied to receiving reports for fixed-price deliverables. The contractor must also provide Unique Entity Identifier and CAGE Code information, and represent its socioeconomic status as a certified small business, with potential eligibility for HUBZone, WOSB, SDVOSB, or SDB preferences. The contract includes mandatory compliance with hazard communication standards, requiring proper
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
CROWFOOT ATTACHMENTThe contract pertains to the procurement of 55 CROWFOOT ATTACHMENTS, identified by NSN 5120-00-184-8412, under solicitation SPE4A6-26-T-08AS, with a total contract value of $3,025.00 at a unit price of $55.000. Delivery is required FOB Origin within 50 days of award, with the original delivery date set for July 20, 2026, and all items must be delivered to the designated destination facility in Tracy, CA. The contract mandates strict compliance with DLA packaging and marking standards, requiring shipment packaging to conform to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence. All packaging must be labeled and marked in accordance with MIL-STD-129, including barcoding and hazardous material identification, and palletization must adhere to RP001 DLA Packaging Requirements. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II with associated AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with all applicable FAR and DFARS clauses, including those addressing hazardous material identification, sustainable products, employment eligibility verification, combating human trafficking, and safeguarding contractor information systems. The contract requires electronic invoicing through WAWF and mandates submission of a complete hazardous materials list and Safety Data Sheets prior to award, with continued updates throughout performance. The solicitation includes deviation-modified clauses effective February 2026 and requires offerors to represent their small business status and provide UEI and CAGE codes. No option quantities or extended terms are specified, and the contract is awarded under simplified acquisition procedures, likely on a Lowest Price Technically Acceptable basis. The only approved suppliers listed are SNAP ON UK HOLDINGS LTD and SNAP-ON TOOLS (AUSTRALIA) PTY LTD under specified part numbers.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
BINDER, LOADThis contract pertains to the procurement of 267 units of a load binder identified by NSN 3990-01-545-0027 and part number 48367, issued under solicitation SPE8EF-26-T-1473 for a Women-Owned Small Business Set-Aside. Delivery is required FOB origin within 149 days from the contract award, with zero variance allowed in quantity, and inspection and acceptance both occurring at the destination warehouse in Tracy, California. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, including palletization requirements. The unit of issue is each, with a unit price of $267.00, resulting in a total contract value of $71,289. The supplies must be prepared in accordance with specific packaging and marking protocols, and the designated delivery address is the DLA Distribution San Joaquin facility. The need ship date is December 28, 2026, with an original required delivery date of November 26, 2026. Transportation and freight shipping instructions reference DLAD procedural notes C19 and C20, and official unit of issue conversions are to be referenced via the provided DLA link.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
DIBBS
PULLER, MECHANICALThe contract is for the procurement of one mechanical puller, identified by NSN 5120-12-381-8318 and part number 7250121-080, supplied by EVAC NORTH AMERICA INC. of Cherry Valley, Illinois. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and acceptance occurs at the destination point. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization per DLA guidelines. The item is for USS ZUMWALT DDG 1000, with shipping directed to FPO AP 96693 via vessel shipment using the fastest traceable means, excluding parcel post. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes treated as major. Technical and quality standards referenced are drawn from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE4A6-26-T-08BQ with a required delivery date of July 14, 2026.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
REAMER, HANDThe contract is for one manual reamer identified by NSN 5110-01-701-8947 and part number TD525C1-85, issued under solicitation SPE4A0-26-T-3960. Delivery is required within five days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must be packaged per MIL-STD-2073-1E with specific packaging codes and marked according to MIL-STD-129, with no special marking required. The Department of Defense incorporates technical and quality requirements from the DLA Master List through referenced R numbers, including packaging (RP001), identification (RQ017), and test equipment standards (RT001). Item Unique Identification is not mandated per the service customer's request, and sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. The item must be shipped via traceable freight, not parcel post, to the specified Virginia Beach address with a required delivery date of July 13, 2026. The contract enforces compliance with all applicable defense standards and directs the use of designated unit of issue and procurement protocols as defined by the DLA.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
JACK, PUSH-PULL, SCREThe contract is for the procurement of six push-pull jack screw assemblies identified by NSN 5120-01-570-3605 under solicitation SPE4A6-26-T-07XR, with a delivery requirement of 286 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which incorporates referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling, and mandates zero non-conformances unless otherwise stated. Attributes on drawings are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Measuring and test equipment used must comply with applicable standards, and export control provisions under ITAR or EAR apply to technical data associated with this item, restricting its disclosure to authorized entities that hold approved US/Canada Joint Certification Program status, have completed DLA-mandated training, and have been formally approved by the DLA controlling authority. Distribution of controlled data is strictly limited to compliant contractors, with DFARS 252.225-7048 governing compliance. The purchasing activity is under the Defense Logistics Agency’s Commodities Division, with performance specified in New Cumberland, Pennsylvania, and primary point of contact provided as Alison Allen.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 811212
New
DIBBS
Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.
Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541990
New
DIBBS
Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.
All Other Professional, Scientific, and Technical Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of fasteners in strict compliance with MIL-STD-2073-1E, ensuring all items undergo thorough cleaning and drying processes followed by thread protection using a wrap or sleeve designated by Packaging Code ZZ. Fasteners must be containerized using Unit/Intermediate Container D3 at Packing Level B to meet military standards for shipment and storage readiness. This work is part of a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with a solicitation window open from July 20, 2026, through July 28, 2026. The North American Industry Classification System code 493190 applies, indicating services related to courier and messenger services and warehousing and storage, reflecting the logistical and preservation nature of the work. All performance must conform to military specifications without exception, and the contract is open to qualified subcontractors responding through the DLA DIBBS portal.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing and SupplyThe contract requires the manufacture or supply of exactly 50 units of a close tolerance screw designated by NSN 5305-01-047-8822, engineered to meet stringent military specifications. Full traceability of materials and manufacturing processes is mandatory, ensuring each unit can be documented from raw material sourcing through final inspection. The deliverables are subject to ITAR and EAR regulations, necessitating strict compliance with export control requirements for all associated technical data, documentation, and communications. Performance is tied to defense standards, and the work falls under NAICS code 332721, indicating precision hardware manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, under a subcontract structure managed by the ASC Commodities Division of the Department of Defense. All activities must align with federal defense procurement protocols, and the point of performance is not geographically specified, suggesting potential flexibility in production location as long as compliance and delivery obligations are met.
Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance at OriginThe contract requires comprehensive inspection and quality assurance services at the manufacturing site in New Cumberland, Pennsylvania, with a focus on first-article and lot acceptance inspections conducted in accordance with MIL-STD-1916. This includes the verification of all critical, major, and minor product attributes to ensure compliance with established military standards. The work is structured as a subcontract under the NAICS code 541330, indicating engineering and technical services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is fixed at the specified zip code 17070-5002. All inspection activities must be carried out on-site at the origin to validate conformity before lot release, ensuring product integrity and adherence to defense quality requirements.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and LabelingThe contract requires compliance with MIL-STD-129 and ASTM D3951 for the packaging, marking, and labeling of military fasteners, ensuring adherence to standardized military specifications for traceability, durability, and uniformity. All packaging must include accurate identification data, barcoding, and proper handling instructions as mandated by these standards, with additional requirements for hazardous material communication if the fasteners or associated components contain regulated substances. The work must be performed in alignment with Department of Defense protocols and delivered to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity under NAICS code 493190, and responses are due by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS system.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection ServicesThe contract requires the provision of cybersecurity compliance services to ensure adherence to CMMC Level 2 and NIST SP 800-171 standards for the protection of controlled unclassified information. The scope of work centers on implementing and maintaining the necessary safeguards, policies, and procedures to meet federal cybersecurity requirements for handling sensitive government data. Performance is expected to be executed at the designated location in Tracy, California, with the contractor responsible for establishing a compliant cybersecurity posture that aligns with Department of Defense standards for subcontractors handling CUI. The contract type is classified as a subcontract under NAICS code 541512, indicating it falls within the computer systems design and related services category. Issued by the ASC Commodities Division under the Department of Defense, the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. All parties engaging in this effort must ensure full alignment with CMMC Level 2 controls, which include access management, audit and accountability, configuration management, incident response, and data protection measures. The contractor is expected to demonstrate readiness for third-party assessment and ongoing compliance validation without relying on external documentation or referenced files.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details