Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

WSTF 250 Area Control Room Design

Awarded
80JSC026P0002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Johnson Space Center has awarded a sole source purchase order to Wright & Dalbin Architects, Inc. for the architectural, engineering, and surveying design of a new 2,000 square foot control room building located in the 250 Control Area at the White Sands Test Facility in Las Cruces, New Mexico. The project, identified by solicitation number 80JSC026P0002, is valued at an estimated $456,523. The new facility is critical for supporting mission-critical testing of spacecraft systems, including flammability, particle impact, and high-pressure gases, while addressing urgent health and safety concerns. The award was made without full and open competition pursuant to FAR 6.103-1, as Wright & Dalbin Architects, Inc. was determined to be the only responsible source capable of satisfying requirements due to their unique knowledge gained from developing the Preliminary Engineering Report. This sole source approach was intended to avoid an estimated $185,000 in duplicative costs. The contractor is required to deliver a complete stamped design package by March 31, 2026, with subsequent consulting services continuing through January 31, 2027.

General Info

Contract Value

$350,740

NAICS

541310 - Architectural Services

Place of Performance

NM, 88012, USA

Set-Aside

NONE

Award Issued Date

Documents

1

NASA JOFOC for WSTF 250 Area Control Room Design

PDF, High priority: read this firstjustification-and-authorization
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Johnson Space Center
Contacts2 people available
OfficeHOUSTON, TX, 77058, USA
Office AddressHOUSTON, TX, 77058, USA
Contacts
Elizabeth D. Tapia
Jesus Cueto (Fabian

Full Description

Show more

NASA White Sands Test Facility (WSTF) awarded a Sole Source Purchase Order to Wright & Dalbin Architects, Inc. for preparation of a comprehensive architectural, engineering, and surveying design for a new building with an approximate gross floor area of 2,000 square feet in the 250 Control Area at NASA/WSTF in Las Cruces, NM. These services are in support of the Agency's mission as well as current and future NASA programs tested at WSTF. This sole source is pursuant to FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements. See Justification for Other Than Full and Open Competition (JOFOC) for further details.



THIS IS NOT A REQUEST FOR COMPETITIVE QUOTES/PROPOSALS AND NO SOLICITATION IS AVAILABLE

Similar Contracts

Same NAICS industry code

NAICS: 541310
New
International
RIBA Stage 1 Feasibility Study for William Aston Hall, Wrexham University
Solicitation # HD/PM/08/10/2026
Wrexham University is seeking quotations from qualified consultants or consultant teams to conduct a RIBA Stage 1 Feasibility Study for William Aston Hall on the Plas Coch campus. Operated in partnership with Theatr Clwyd, the venue requires a comprehensive appraisal to develop and compare options for the audience journey, auditorium, technical theatre, backstage facilities, access and inclusion, heritage constraints, and building services. The study must provide broad cost ranges, phasing advice, and delivery risks, with all core services and the final report due by February 19, 2027. The project is funded by the Arts Council of Wales Arts Capital Investment Fund with match funding from the university. The maximum budget for core Stage 1 services is 50,000 GBP including VAT, and any quotations exceeding this amount will be rejected. While the university is requesting optional pricing for Stage 2 Concept Design, the award for that stage is discretionary and subject to available funding. Quotations must be submitted via the Sell2Wales Tender Postbox by 12:00 noon on October 27, 2026. All suppliers must be registered on the Government Central Digital Platform and meet mandatory conditions regarding health and safety, data protection, financial standing, and a minimum of 5,000,000 GBP in employer liability insurance. The contract will be awarded based on the Most Advantageous Quote, with evaluation weighted toward quality (80%) and price (20%). Quality assessments focus on the understanding of the brief, methodology, team experience, programme management, and stakeholder engagement. The successful appointment will be governed by the RIBA Concise Professional Services Contract 2020 (2024 Amendment) for Architectural Services.
Wrexham University

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541310
New
SLED
Architect IDIQ Services
Solicitation # RFQ270001
East Texas A&M University is soliciting qualifications for an Indefinite Delivery/Indefinite Quantity (IDIQ) contract, solicitation number RFQ270001, to establish a pool of qualified architectural firms for as-needed services. The university intends to select multiple firms based on a qualification-based selection process, evaluating respondents on their statement of qualifications, company background, and performance on past representative projects. The anticipated initial term is three years, with the possibility of two one-year renewal options. The scope of work includes the design phase, development of bidding documentation, and architectural inspections to ensure conformance with university system standards, building codes, and statutory requirements. Submissions must be provided as a single PDF file and are due by 3:00 p.m. CDT on November 6, 2026. Required documentation includes a qualification statement limited to 40 pages, an execution of offer, a notarized non-collusion affidavit, and a VetHUB participation plan. Respondents must certify compliance with various Texas state laws, including prohibitions on boycotting Israel and engaging with certain prohibited countries, as well as adhering to non-discrimination and federal safety standards. Key personnel resumes are limited to two pages each, and firms must provide a five-year insurance claims history. The primary point of contact for this solicitation is Sandy Barnes.
East Texas A&M University

POSTED

about 12 hours ago

DEADLINE

in 16 days
View Details
NAICS: 541310
New
Federal
C1DA--Renovate Specialty Clinics on 2nd
Solicitation # 36C24526R0101
Solicitation 36C24526R0101 is a request for Architect/Engineer services to provide a turnkey design package for the renovation of approximately 16,530 square feet of specialty clinic space on the second floor of the Beckley VAMC in West Virginia. The project focuses on creating an updated central check-in and waiting area, improving wayfinding and traffic flow to support a one-stop care approach, and upgrading systems in a facility originally constructed in the 1950s to meet current building codes and VA guidelines. Key deliverables include construction drawings across all disciplines, schematic designs, life-cycle cost analysis, preconstruction risk assessments, and detailed phasing and infection control plans to manage work within an occupied facility. While the A/E service value is not specified, the resulting construction budget is not to exceed 19,912,000 dollars. This procurement is a 100 percent Service-Disabled Veteran-Owned Small Business set-aside conducted under the Brooks Act. Selection is based on qualifications, with a shortlist of three to five firms chosen for interviews. The primary evaluation factors are professional qualifications, specialized experience in healthcare renovation, and past performance, followed by capacity to accomplish the work, organization and quality control, and geographic knowledge of the locality. Interested firms must be registered in SAM and certified in the SBA Veteran Small Business Certification database. The submission deadline for SF 330 qualifications packages has been extended to November 13, 2026, at 2:00 PM EST, with submissions required in PDF format and limited to 5MB per email attachment.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 15 hours ago

DEADLINE

in 23 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Johnson Space Center

Same awarding agency

NAICS: 336414
New
Federal
Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Request for Proposal
Solicitation # 80JSC027R0004
The National Aeronautics and Space Administration Johnson Space Center is soliciting proposals under solicitation 80JSC027R0004 for the Commercial Low Earth Orbit Destination Contract. This effort seeks a Multi-Award Indefinite Delivery/Indefinite Quantity contract, utilizing a Firm-Fixed-Price structure, for the design, development, manufacture, launch, and operation of a Commercial LEO Destination System to succeed the International Space Station. The system comprises three primary components: the Crew Transportation System, the Commercial LEO Destination, and the Cargo Transportation System. Performance is measured across three capability categories ranging from one-month crew tended missions to six-month standard service missions. The contract includes a base ordering period from April 2027 through April 2035, with two subsequent option periods extending the potential performance through April 2042. Proposals are due by December 8, 2026, at 1:00 p.m. Central Time, with Volume III regarding past performance requested early on November 24, 2026. Award decisions will be based on best value, evaluating Mission Suitability, Price, and Past Performance, with Mission Suitability being the most significant technical factor. The scope of work involves rigorous certification and safety standards, including compliance with AS9100 and specific human space flight requirements. Key contractual obligations include the submission of an Organizational Conflicts of Interest plan, adherence to the Outer Space Treaty, and the procurement of specific property damage insurance for certain launch vehicle categories. All submissions must be delivered electronically via NASA's EFISS Box in Microsoft Office formats.
Guided Missile and Space Vehicle Manufacturing

POSTED

7 days ago

DEADLINE

in about 2 months
View Details
NAICS: 541330
New
Federal
Rendezvous Proximity Operations, and Capture (RPOC) VI
Solicitation # 80JSC027RPOC6
The NASA Johnson Space Center is conducting market research via a Sources Sought notice for the Rendezvous Proximity Operations, and Capture (RPOC) VI requirement. The agency is seeking capability statements from interested firms, including all socioeconomic small business categories and HBCU/MI institutions, to provide comprehensive engineering support services. This scope includes research, analysis, design, development, integration, verification, test, evaluation, and operations support specifically for Guidance, Navigation and Control (GN&C), system engineering, and RPOC activities. Key technical objectives involve developing high-fidelity simulation environments and analysis tools, providing documentation for Certification of Flight Readiness (CoFR) recommendations, and offering real-time technical support for the ISS/Destination Mission Evaluation Room RPOC Console. The procurement falls under NAICS code 541330 for Engineering Services, with a size standard of 25.5 million dollars. Technical requirements necessitate proficiency in tools such as Trick, JEOD, Copernicus, Genesis, and NASA core Flight System, utilizing programming languages including MATLAB, Python, Julia, C, and C++. Performance will primarily support the Johnson Space Center and other NASA centers, with potential for both domestic and international travel. Interested vendors must submit a capability statement of no more than five pages, including a brief technical narrative and a list of up to five relevant customers from the past five years, to the designated points of contact by October 28, 2026.
Engineering Services

POSTED

7 days ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS