This Government Contract opportunity from Department Of Commerce was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

X-ray Computed Tomography (XCT) Microscope Supply and Installation

Closed

Federal

Submission Closed06/11/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

University of Alberta - Request for Proposal - CFI High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High Performance Liquid Chromatography (UHPLC) System

Solicitation # AB-2026-06236

The University of Alberta is seeking proposals for the supply, installation, and ongoing support of a High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High-Performance Liquid Chromatography (UHPLC) system. This equipment will be utilized by the Faculty of Science, Department of Chemistry, specifically within the Mass Spectrometry Facility to support various projects involving ESI-HRMS, LC-MS, and LC-MS/MS analyses. This solicitation, identified by number AB-2026-06236, was posted on September 11, 2026, with a response deadline of October 6, 2026. Interested parties should direct inquiries to the primary point of contact, Satinder Atwal, the Senior Supply Consultant.

University of Alberta

POSTED

DEADLINE

Supply of DustTrak DRX Model 8533 External Pumps

POSTED

DEADLINE

Supply of Automated Cell Counter and Analyzer

National Institutes Of Health Olao

POSTED

DEADLINE

Handheld XRF Analyzer Supplier

POSTED

DEADLINE

SCMOS Widefield Camera and Adapter Supplier

National Institutes Of Health Olao

POSTED

DEADLINE

Supply of Flash Point Tester

POSTED

DEADLINE

QX700 E Droplet Digital PCR System Supply

National Institutes Of Health Olao

POSTED

DEADLINE

Temp Controlled 42 Plate Hotel

Solicitation # AB482902

Brookhaven Science Associates (BSA) is soliciting quotations for the procurement of a temperature-controlled plate storage incubator with two stackers and a built-in barcode reader, along with comprehensive on-site installation and training for integration with the Art Robbins CryCam UV imaging system at Brookhaven National Laboratory (BNL). The system must support SBS/ANSI-SLAS, low-profile SBS, and Linbro plates, maintaining temperatures between 4C and 25C. This is a small business set-aside solicitation for a firm fixed price purchase order, with the award based on the lowest total evaluated price from a responsive and responsible offeror. Quotations are due by October 2, 2026, and must remain valid for at least sixty days. The procurement includes strict shipping and pricing requirements. For items under 150lbs, shipping may occur via BSA's FedEx account; otherwise, pricing must be all-inclusive of freight, tariffs, and handling. For foreign products over 150lbs where all-inclusive pricing is unavailable, BNL will act as the Importer of Record under DAP Incoterms. Suppliers must provide the country of origin, Unique Entity Identifier (UEI), and applicable ECCN and HTS codes. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory, and onsite personnel must adhere to stringent security badging and safety protocols, including specific documentation requirements for non-U.S. citizens. The contract incorporates BSA General and Supplemental Terms and Conditions for non-commercial items and onsite work, as well as various FAR clauses.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Acquisition for 10X Genomics GEN X Epi Multiome

Solicitation # NINDS09281

National Institutes Of Health Olao

POSTED

DEADLINE

Solicitation # 140G0126Q0293

The USGS Geological Survey Florence Bascom Geoscience Center (FBGC) is soliciting quotes under solicitation 140G0126Q0293 for the purchase of a lightweight vibra-coring system to evaluate sub-bottom stratigraphy in coastal areas, rivers, and lakes. The required system must weigh between 100 and 200 lbs, provide at least 3000 lb/ft of adjustable impact force, and exceed 1000 vibrations per minute. Technical specifications include compatibility with 3 and 4-inch core barrels, the ability to collect cores longer than 5 meters, and flexibility to switch between DC-AC or 120-220v power supplies. The procurement also includes the acquisition of a power transformer and 250 meters of cable, with all items to be delivered to Reston, VA, within 60 days after receipt of order. This is a total small business set-aside under NAICS code 334516, with a size standard of 1,000 employees. The contract will be awarded to the responsible offeror providing the lowest priced quotation that receives an acceptable technical compliance rating. Vendors must be registered in the System for Award Management (SAM) and comply with the Buy American Act. Quotes are due by September 16, 2026, with an anticipated award date of September 17, 2026. Payment will be processed electronically through the Invoice Processing Platform (IPP), and invoices must be submitted within 90 calendar days following the expiration of the period of performance.

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Astromaterials Glovebox Systems - Design & Fabrication (A-BOX)

Solicitation # 80JSC026A-BOX

This notice, issued by NASA’s Johnson Space Center under solicitation number 80JSC026A-BOX, is a Request for Information (RFI) for the design, fabrication, testing, delivery, and installation of controlled-atmosphere glovebox systems to support the Astromaterials Research and Exploration Science Curation Facility. The systems are intended for handling lunar and planetary samples, including those from Artemis missions, and must operate in ambient, cold (−85 to −20 °C), and ultra-cold/cryogenic (< −85 °C) environments while maintaining inert atmosphere conditions. Technical requirements are aligned with the American Glovebox Society Guidelines AGS-G001-2007 (3rd Edition), and compliance with quality standards such as ISO9001, AS9100, and NQA-1 is mandatory. The RFI seeks industry input on feasibility, capabilities, and cost estimates, with no formal proposals required. Access to the technical library containing detailed requirements is granted through SAM.gov after completing a two-step verification process and submitting a formal request form to NASA, with all requestors responsible for U.S. export control compliance. The response deadline has been extended to August 5, 2026, at 4:00 PM Central Time. The RFI emphasizes small business participation and solicit feedback on realistic subcontracting goals, barriers to entry for small businesses, and strategies to enhance involvement such as modularizing scope or encouraging teaming arrangements. NASA is considering potential set-asides for Small Business, Small Disadvantaged Business, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. Organizational conflicts of interest (OCI) are a significant concern due to the nature of prior involvement in astromaterials handling and related design work; respondents must disclose any potential OCI and propose mitigation strategies, though NASA’s review at this stage does not constitute formal approval or assurance. Responses must be submitted electronically via email to the designated contracting officer and contract specialist, formatted according to Attachment II—Capabilities Questions and Responses—which addresses small business utilization, OCI, technical capability, and business considerations. The place of performance is the ARES Curation Facility in Houston, Texas, and final delivery and installation will occur there. No contract value, pricing, or award criteria are provided, as this is purely an information-gathering phase to inform future procurement strategy. Any information submitted is treated as voluntarily provided under FOIA and will not be publicly

NASA Johnson Space Center

POSTED

DEADLINE

Leica VT1200S Vibrating Blade - Brand name only

Solicitation # 36C25226Q0680

Solicitation 36C25226Q0680 is a brand-name-only request for quote issued by the Department of Veterans Affairs for the procurement of one new, non-refurbished Leica VT1200 S Fully Automated Vibrating Blade Microtome System. This equipment is required by the Research Department at the Jesse Brown VA Medical Center in Chicago, Illinois, to support diabetes mellitus research involving the generation of precision-cut liver slices. The procurement includes the microtome configuration, a NEMA5 15 C13 power cord, VT 1200 Silver Service, and Vibrocheck. The contract is set aside for HUBZone Small Businesses, and the award will be granted based on the Lowest Price Technically Acceptable (LPTA) offer. The successful contractor must deliver the equipment to the Jesse Brown VA Medical Center Warehouse within 30 to 45 calendar days after the award under FOB Destination terms, with shipping fees capped at 250 dollars. No onsite installation is required, but the contractor must provide the manufacturer's standard warranty. Quotes are due by September 16, 2026, at 1 PM CDT and must be submitted electronically to the contracting officer. Offerors must comply with Buy American certifications and specific security and access procedures at the delivery site. Payment will be made electronically upon receipt of the equipment.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 19 hours ago

DEADLINE

in 4 days

AI Contract Overview

The contract involves the supply, delivery, installation, and calibration of a Zeiss Versa XRM 730 X-ray Computed Tomography (XCT) microscope at the National Institute of Standards and Technology (NIST) facility in Boulder. This includes not only providing the equipment but also integrating the system, performing necessary safety checks, and conducting acceptance testing to ensure the system meets required standards. The procurement is managed by the Department of Commerce, specifically NIST, with the solicitation posted in late May 2026 and a response deadline set for mid-June 2026. This subcontract falls under the NAICS code 334516, which relates to electromagnetic and electrothermic apparatus manufacturing. The contract’s main objective is to enhance NIST Boulder’s capabilities in XCT microscopy by installing a state-of-the-art microscope that allows advanced imaging and analysis. The comprehensive scope ensures full operational readiness at the installation site, aligning with NIST’s standards for safety and performance verification before project acceptance and formal handover.

General Info

Supply, install, calibrate Zeiss XRM 730 XCT microscope at NIST Boulder, ensuring safety and acceptance testing.

Agency

Department Of Commerce NistView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

MD, USA

Set-Aside

NONE

Documents

This scope was carved out of NIST-NOI-26-305-00006.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Versa 730 X-ray Computed Tomography Microscope

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 27

subcontract

Response DeadlineJun 11

Deadline has passed

Submission Closed

06/11/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply, delivery, installation, and calibration of a Zeiss Versa XRM 730 XCT microscope at NIST Boulder, including system integration, safety checks, and acceptance testing.