This Solicitation opportunity from Government of Canada was posted on September 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

X-Ray Inspection System

Closed

NRC-X-Ray Inspection System/RFIInternational

Submission Closed09/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334517

New

SLED

IFB Dual Cavity Diode Pumped SolidState, High Repetition Rate Laser

Solicitation # 28-EQUI-ITB-1745

Texas A&M University has issued Invitation for Bid 28-EQUI-ITB-1745 for the procurement of a Dual Cavity Diode Pumped SolidState, High Repetition Rate Laser and associated accessories. The solicitation is open from November 4, 2026, to November 12, 2026, with all responses required to be submitted through the AggieBid online portal. While Photonics equipment is listed for illustrative purposes, equivalent items will be considered provided the vendor submits a detailed specification sheet, manufacturer, and model number for agency review. The contract requires a minimum 12-month warranty covering all parts and labor, with payment terms set at 100% Net 30 upon receipt and acceptance of goods. Shipping must be FOB Destination, Freight Prepaid and Allowed for domestic orders, and Delivered Duty Paid (DDP) to College Station, Texas, for international orders. Because the procurement involves federal funding, the successful vendor must comply with 2 CFR Part 200 Appendix II and certify that they are not debarred or suspended from receiving federal funds. Additionally, vendors must provide export control notifications for items controlled under ITAR or EAR and acknowledge that the agreement is subject to cancellation if funds are not appropriated by the Texas Legislature.

POSTED

DEADLINE

Flow Monitoring Equipment SupplyThis subcontract for the City of Hamilton focuses on the supply of specialized flow monitoring hardware and sensors to support prime contractors. The scope of work includes providing flow meters, data loggers, telemetry equipment, and necessary mounting hardware specifically designed for monitoring sanitary and combined sewers. The supplier is responsible for delivering all required monitoring equipment directly to the prime contractor or other designated sites within Canada. The procurement process for this equipment supply contract began on November 4, 2026, with a response deadline set for December 3, 2026. Classified under NAICS code 334517, the contract ensures that the technical infrastructure needed for critical sewer flow monitoring is available to the primary project executors.

POSTED

DEADLINE

Precision Pressure Gauge ManufacturingThis subcontract for Precision Pressure Gauge Manufacturing involves the production of a single, fully tested dial indicating pressure gauge for prime contractors supporting the DLA Weapons Support ASC. The manufacturer must adhere to MIL-G-18997E specifications and Amendment 1 cleaning requirements for critical applications, ensuring all materials used are mercury-free. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is mandatory. The project requires the use of specialized precision machining and calibration equipment to meet strict Department of Defense standards. Managed under NAICS code 334517, the contract was posted on November 4, 2026, with a response deadline of November 12, 2026. Performance for this requirement is designated for FPO 09588.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Liquid Quantity Transmitter SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of one Liquid Quantity Transmitter. The hardware must specifically match NSN 6680011416124 and Part Number 391002-313 from Simmonds Precision Products Inc. As a Critical Application Item, the transmitter must adhere to strict quality standards, including physical identification and bare item marking per RQ017 and packaging requirements per RP001. The procurement falls under NAICS code 334517 and is intended for prime contractors on Defense Logistics Agency supply contracts. Interested parties must respond by the deadline of November 12, 2026, to provide the single physically marked and packaged unit as specified in the requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Medical Imaging Equipment Supply (CT, RF, DR, SPECT)This subcontract opportunity with the Department of Veterans Affairs involves the supply of specialized high-tech medical imaging systems to prime contractors for VA Enterprise Procurement Contracting projects. The scope of work focuses on the delivery of commissioned hardware across several modalities, including Computed Tomography, Radiographic Fluoroscopy, Digital Radiography, and Single Photon Emission Computed Tomography. All provided equipment must strictly adhere to VA NAC or DLA-TS contract specifications. The solicitation was posted on November 4, 2026, with a response deadline of August 10, 2027. This procurement falls under NAICS code 334517 and is managed through Nac High Technology Orders.

Nac High Technology Orders (36A797)

POSTED

DEADLINE

Supply of Aviation Sensing ElementsThis subcontract involves the procurement and delivery of specialized aviation sensing elements to support U.S. Coast Guard aviation projects. The selected provider will source and deliver the required hardware to the Aviation Logistics Center located in Elizabeth City, North Carolina. A critical requirement of the contract is the provision of a Certificate of Conformance in accordance with FAR 52.246-15, which must include the National Stock Number, Part Number, Serial Number, and Purchase Order Number. All physical sensing elements and the completed certification must be delivered within 90 days after receipt of order.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Electrical Resistance Temperature Transmitter SupplierThis small business set-aside subcontract involves the supply of 58 electrical resistance temperature transmitters for the DLA Weapons Support ASC. The supplier is responsible for manufacturing or sourcing units under NSN 6685010498474, ensuring all products meet RQ001 quality requirements and MIL-STD-129 packaging standards. Delivery is required FOB Origin to the DLA Distribution Depot Hill. Compliance requirements include a CMMC Level 2 self-assessment and strict adherence to the RA001 DLA Master List. The opportunity is categorized under NAICS code 334517 and is managed by the Department of Defense. Interested parties must have submitted responses by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Special Scale Meter SupplierThis subcontract, managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, requires the procurement and delivery of a Special Scale Meter for prime contractors on NAVSUP projects. The supplier must ensure the equipment meets CLIN 0005 specifications and provide comprehensive serialization data, including lot and batch numbers and unique item identifiers. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 334517. Beyond the physical delivery of the meter and associated documentation, the contractor is mandated to participate in the Government Industry Data Exchange Program to report any nonconformances. The solicitation was posted on November 4, 2026, with a response deadline set for December 4, 2027.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Security Camera and Power Component SupplierThis subcontract involves the supply of auxiliary imaging and power conversion hardware to support prime contractors working on projects for the Air Force 42d Security Forces Squadron. The scope of work includes the delivery of HD-IP scene cameras equipped with 50-foot cables and tripod mounts housed in Pelican cases, as well as power inverter kits featuring 12V input and 110V output with battery clamps and vehicle auxiliary outlet connectors. Managed under the Department of Defense and the FA3300 42 Cons Cc agency, the contract falls under NAICS code 3345117. Performance for these deliveries is centered in Montgomery, Alabama. The solicitation was posted on November 4, 2026, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

6525--SEP 2026 Consolidation - HTME with Extended Installation Services (includes Turnkey Services)

Solicitation # 36A79727Q0001

The Department of Veterans Affairs, through the NAC High Technology Orders office, is conducting a pre-solicitation for the SEP 2026 Consolidation of High Tech Medical Equipment (HTME) with Extended Installation and Turnkey Services. This procurement is restricted to companies holding current contracts for the specified equipment with the VA National Acquisition Center (NAC) High Tech Medical Equipment Division or the Defense Logistics Agency, Troop Support (DLA-TS). The scope involves providing a wide array of medical imaging and therapeutic equipment, including CT scanners, MRI machines, LINACs, and CATH labs, across various VA VISNs in locations such as California, Florida, Texas, and Ohio. The solicitation follows a phased timeline, with equipment offers due by January 20, 2027, and turnkey offers due by April 28, 2027, aiming for award delivery orders by August 9, 2027. Awards are based on technical evaluations submitted by customers to the NAC Contracting Officer. All communications must be coordinated through the NAC Consolidation Coordinator, Michael Kuchyak. Vendor presentations are permitted only to clarify equipment features, and discussions regarding pricing or features not included in the original quote are strictly prohibited.

Nac High Technology Orders (36A797)

POSTED

DEADLINE

Tactical Optics & Night Vision SupplierThis subcontract opportunity, managed by the Department of Energy Contracting Operations Division, seeks a supplier to provide tactical optics and night vision equipment. The scope of work involves delivering completed hardware, specifically short-range and medium to long-range thermal optics, as well as advanced rangefinder systems. These supplies are intended for prime contractors supporting projects under the DOE NNSA Office of Secure Transportation. The procurement falls under NAICS code 334517. Interested parties should note that the solicitation was posted on November 4, 2026, with a response deadline set for November 18, 2026.

Contracting Operations Division

POSTED

DEADLINE

Mid-IR and Far-IR Detector/Source SupplyThis subcontract involves the supply of specialized radiation sources and detectors to prime contractors supporting scientific instrument projects for the National Research Council of Canada. The scope of work includes the delivery of calibrated Mid-IR sources, beamsplitters, and detectors covering 8,000 to 350 cm-1, as well as Far-IR sources and detectors covering 680 to 30 cm-1. Additionally, the provider must supply room-temperature DLATGS detectors, ensuring all equipment meets a spectral resolution requirement of better than 0.04 cm-1. The opportunity is categorized under NAICS code 334517 and is managed by the Government of Canada. While the primary agency is based in Canada, the place of performance extends globally across North America, South America, Asia, Europe, and the Caribbean. Interested parties must adhere to the response deadline of November 19, 2026.

National Research Council of Canada

POSTED

about 24 hours ago

DEADLINE

in 15 days

AI Contract Overview

The National Research Council of Canada is issuing a Request for Information to identify commercially available high-resolution 2D X-ray inspection systems to support the research, development, and failure analysis of rechargeable battery technologies. Operating out of facilities in Ottawa, the Automotive and Surface Transportation Research Centre seeks a non-destructive imaging solution capable of examining a variety of battery configurations, ranging from thin pouch cells to high-density multilayer prismatic cells and small modules. The primary goal is to complement existing computed tomography capabilities with a system that offers high image quality, spatial resolution, and flexibility in sample manipulation to better visualize internal structural features and defects. Technical requirements for the system include a source with adjustable voltage and power, a detector preferably featuring a 16-bit dynamic range, and a safety-compliant radiation shielding enclosure with interlocking mechanisms. The desired software should support dimensional metrology, image processing for noise reduction and stitching, and comparative analysis tools such as overlay and subtraction. While this is a sources-sought activity and not a formal solicitation for award, the NRC has indicated an anticipated budget of approximately 225,000 CAD. Respondents are asked to provide representative imaging samples, estimated delivery timelines, and details regarding their ability to provide on-site support in Ottawa.

General Info

NRC seeks high-resolution 2D X-ray systems for battery research with 225,000 CAD budget.

Agency

Government of Canada → National Research Council of Canada

NAICS

334517 - Irradiation Apparatus Manufacturing

Place of Performance

National Capital Region (NCR), Quebec (except NCR), CAN

Set-Aside

NONE

Documents

rfi

High

rfi

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 11

Solicitation

Response DeadlineSep 24

Deadline has passed

Submission Closed

09/24/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

Contacts

Sonia BeauchesneContracting Authority

contact@example.gov

Full Description

Introduction The National Research Council of Canada (NRC) is seeking information regarding advanced X-ray inspection systems to support the research, development, characterization, and failure analysis of rechargeable battery technologies. The NRC's Automotive and Surface Transportation (AST) Research Centre conducts research and testing on a broad range of energy storage systems, including lithium-ion, sodium-ion, solid-state, and emerging battery technologies intended for transportation, aerospace, defence, and stationary energy storage applications. As battery systems become increasingly complex and energy dense, there is a growing need for non-destructive techniques capable of revealing internal structural features and defects that may affect performance, reliability, safety, and manufacturability. X-ray inspection provides a valuable method for visualizing internal battery structures without disassembly, enabling researchers to evaluate cell construction, manufacturing quality, degradation mechanisms, and failure modes throughout the product lifecycle. The AST team operates one of Canada's leading battery testing and characterization facilities, supporting government, industry, and academic partners across the battery value chain. The addition of advanced X-ray inspection capabilities would complement existing electrochemical, thermal, and safety testing infrastructure by providing high-fidelity internal imaging of battery components and assemblies. Objectives The primary objective of this Request for Information (RFI) is to identify and evaluate commercially available X-ray inspection systems suitable for rechargeable battery research, development, characterization, and failure analysis applications. NRC is particularly interested in high-resolution two-dimensional (2D) X-ray imaging systems capable of examining battery cells, cell components, and related assemblies. While inspection throughput is not a primary consideration, image quality, spatial resolution, defect detection capability, sample manipulation flexibility, system versatility, and suitability for laboratory-based research are of significant interest. The information gathered through this RFI will assist NRC in understanding the current state of available technologies, identifying relevant capabilities and limitations, and informing the development of future technical requirements.the objectives of the request for information