This Pre-Solicitation opportunity was posted on August 8, 2005. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Y -- Bus Body Shop Modifications (BUS II) Pennsy Drive Facility

Closed

FN5074Federal

Submission Closed09/07/2005, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236210

New

AMC-0171 LOU ATCT Public Announcement

Solicitation # amc-0171-lou-atct-public-announcement

Solicitation AMC-0171-LOU-ATCT involves a construction project in Kentucky managed by PTSI Managed Services Inc. (Parsons). The scope of work encompasses electrical corrections, including the installation of surge protective devices, air terminals, grounding gates, and parking lot light poles, as well as architectural repairs such as handrail replacement, caulking, rust removal, protective painting, and exterior siding reinforcement. The estimated magnitude of construction for these improvements is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including designated small disadvantaged, women-owned, HUBZone, and veteran-owned small businesses. Interested parties must submit their responses by November 8, 2026. The project falls under NAICS code 236210, and primary coordination is handled by Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-169 CVG ATCT Public Announcement

Solicitation # amc-169-cvg-atct-public-announcement

The AMC-169 CVG ATCT project is a comprehensive facility improvement solicitation managed by PTSI Managed Services Inc. (Parsons) located in Kentucky. The scope of work encompasses a wide range of multidisciplinary repairs and upgrades, including mechanical testing of internal fan units, replacement of rusted disconnect switches and various gates, and structural reinforcement to replace water-damaged insulation. Architectural requirements involve extensive roof work including PVC replacement, hatch repair, drainage and scupper improvements, as well as the replacement of doors, railings, and tiles, followed by painting. Civil improvements include asphalt milling, sealing CMU wall joints, sidewalk work, and the replacement of parking lot signage. The estimated value of the contract ranges between 1,000,000 and 5,000,000 dollars. This opportunity is designated as an SBA set-aside, welcoming bids from Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 2, 2026, under NAICS code 236210.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-1230-00 VOR counterpoise and roof replacement in Marianna, FL

Solicitation # aso-1230-00-vor-counterpoise-roof-replacement-marianna-fl

This solicitation, managed by Parsons, involves the removal and replacement of the roof and the installation of a new counterpoise system at the VORTAC facility located in Marianna, Florida. The project falls under NAICS code 236210 and is open to various small business types, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of January 28, 2027. The primary point of contact for this opportunity is Quentin Wack.

POSTED

DEADLINE

AMC-0158 NEW RTR Public Announcement

Solicitation # amc-0158-new-rtr-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive set of facility repairs and upgrades in Louisiana. The scope of work encompasses electrical corrections to replace corroded disconnects, mechanical replacements for AHU and CU units, and civil repairs including grading and gravel addition. Additionally, the project requires structural reinforcement and concrete crack repair, alongside architectural improvements such as sandblasting, painting, and the replacement of plywood walls and gypsum ceiling panels. The estimated construction value for this project is between 500,000 and 1,000,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236210. Interested parties must submit their responses by the deadline of November 1, 2026.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-0174 OWB ATCT Public Announcement

Solicitation # amc-0174-owb-atct-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive facility renovation project located in Kentucky with an estimated construction value between 500,000 and 1,000,000 dollars. The scope of work is multidisciplinary, encompassing electrical upgrades such as rerouting down conductors and conducting arc flash studies, as well as mechanical replacements of rooftop and condensing units. Roof improvements include the installation of EPDM membranes on three roofs, new cables, and scuppers. Architectural requirements cover interior lighting and emergency light replacement, wall painting and patching, rust repair, and the installation of new handrails, door frames, and hardware. The opportunity is designated as a small business set-aside, open to various certifications including SDB, WOSB, HUBZone, and VOSB. Interested parties must submit their responses by the deadline of March 21, 2027. The project falls under NAICS code 236210 and is identified as the AMC-0174 OWB ATCT Public Announcement.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

Concrete Structure & ReinforcementThis subcontract for the California Department of Transportation involves the supply and installation of concrete structures and reinforcing steel for prime contractors on various infrastructure projects. The scope of work includes welding reinforcement, installing partially fabricated cages, and utilizing macro/micro synthetic fibers along with expanded polystyrene foam block-outs. The contractor is responsible for the delivery of all installed concrete structures and reinforcement cages. To ensure quality and regulatory adherence, the provider must submit mill certificates for all rebar and certificates of compliance for the cages. Responses for this opportunity are due by December 8, 2026.

California Department of Transportation

POSTED

DEADLINE

F-35 Composite Repair and Training Facility / F-35 Maintenance Facility, Hill Air Force Base, Utah

Solicitation # W9123827X

The U.S. Army Corps of Engineers, Sacramento District, is announcing an upcoming competition for the design and construction of an F-35 Composite Repair and Training Facility and an F-35 Maintenance Facility at Hill Air Force Base, Utah. The total program funding is estimated at 157,886,000 dollars for the repair and training facility and 213,716,000 dollars for the maintenance facility. The project involves the construction of specialized industrial spaces, including clean rooms, paint bays, and secure areas complying with Intelligence Community Directive 705 standards, all designed as permanent construction meeting Department of Defense Unified Facilities Criteria. The acquisition will be conducted under an Other Transaction framework using either a Progressive Design-Build or Construction Manager at Risk approach. The selection process will involve a two-step competitive sequence consisting of white paper submissions and pitch meetings to select a single entity for design and construction services. Interested parties must possess a Cybersecurity Maturity Model Certification Level 1 self-assessment. An informational virtual Industry Day is scheduled for November 17, 2026, with a registration deadline of November 12, 2026.

W075 Endist Sacramento

POSTED

DEADLINE

Tinker AFB 2026 Multiple Award Construction Contract (MACC)

Solicitation # FA8137-26-R-0040

Solicitation FA8137-26-R-0040 is a competitive Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Construction Contract (MACC) for general construction services at Tinker Air Force Base, Oklahoma. The contract encompasses a broad range of sustainment, maintenance, repair, alteration, renovation, and minor construction projects. Work execution is categorized into three methods: Design-Build, Construction with Limited Design, and Construction Only. The MACC has a total aggregate maximum value of 950 million dollars, with a minimum guarantee of 500,000 dollars per awarded contract. The period of performance consists of a five-year base period starting March 26, 2027, with one five-year option period. The procurement is divided into a Small Business Pool, which is a 50 percent set-aside, and a Full and Open Pool. Awards are based on the Highest Technically Rated Offeror (HTRO) methodology, utilizing a Minimum Technical Threshold Rating (MTTR) based on validated self-scored matrices for technical experience, design experience, certifications, and staffing. There is no cost or price evaluation at the IDIQ level. Offerors must be registered in the System for Award Management and meet CMMC Level 1 certification requirements. Following several amendments, the final proposal response deadline was extended to November 16, 2026.

POSTED

DEADLINE

Modular Building FabricationThis subcontract involves the fabrication of prefabricated modular duplex units for prime contractors working on Parks Canada Agency projects located in Lutsël K’é, Northwest Territories. The selected provider is responsible for manufacturing the units according to approved designs, implementing a Factory Quality Management Plan, and performing essential factory air-tightness testing to ensure quality and performance. To facilitate delivery to the remote site, the contractor must reinforce the units to withstand the stresses of barge and air transport. The final deliverable consists of completed, factory-tested modular units that are fully prepared for shipment to the place of performance in Canada.

POSTED

DEADLINE

IFB 06-26 Biochar Facility Construction

Solicitation # IFB-06-26

The Southeastern Public Service Authority of Virginia (SPSA) is soliciting bids for the construction of a 40,872 square foot biochar processing plant located in Portsmouth, Virginia. The facility is designed to manage the organic portion of the SPSA SORT System. The successful contractor will be responsible for providing all labor, materials, and warranties to deliver a fully operational facility, which includes coordinating construction activities with SPSA and AMP regarding the installation and commissioning of specialized equipment. The contract will be awarded to the lowest responsive and responsible bidder, with evaluations based on technical compliance, the ability to meet quality standards, and the provision of descriptive literature and references for similar completed projects. Key requirements include the submission of performance and labor and material payment bonds totaling 50 percent of the contract amount and adherence to strict safety and accessibility standards, including the Americans With Disabilities Act. Bidders must provide one original and four copies of their bid, along with an electronic copy on a flash drive, by the deadline of November 20, 2026. The contractor is required to provide as-built drawings upon completion and must comply with various federal and state regulations, including drug-free workplace and non-discrimination provisions. All work must be performed in accordance with the CED Project Manual and associated drawings, with specific quality assurance testing for concrete and asphalt as outlined in the inspection criteria.

Southeastern Public Service Authority

POSTED

DEADLINE

IE181 - WHS Greenhouse Construction

Solicitation # 140A2327Q0297

Solicitation 140A2327Q0297 is a fixed-price contract set aside exclusively for Indian Small Business Economic Enterprises (ISBEE) to install a greenhouse at Wingate High School in Fort Wingate, New Mexico. The project, estimated between $100,000 and $250,000, involves a comprehensive scope of work including foundation construction, utility connections, glazing, environmental controls, and heating. The contractor must complete the installation within 120 calendar days from the Notice to Proceed, which is contingent upon the successful background investigation of on-site personnel. Required qualifications include New Mexico contractor licensure for general building, electrical, and mechanical/gas work, as well as any necessary Navajo Nation tribal business licenses. Award will be made using the Lowest Price Technically Acceptable (LPTA) method to a responsible offeror who meets all technical requirements, including the submission of a project-specific Quality Control Plan and a detailed progress schedule. Bids exceeding $35,000 require a bid bond. Offerors must be registered in SAM.gov and provide a signed quote, UEI number, and specific Indian Economic Enterprise representations. The project must adhere to strict safety and quality standards, including OSHA, NEC, IBC, and ASTM specifications, and comply with the Davis-Bacon Act for wage requirements. All quotes are due to the Bureau of Indian Education by November 19, 2026, at 12:00 PM MDT.

Indian Education Acquisition Office

POSTED

DEADLINE

ESPH AB RDC Sidley Depot (ESPH753)

Solicitation # ESPH753

Rother District Council is seeking a qualified main contractor for the design and construction of a new four-bay steel portal frame workshop and associated facilities at the Sidley Depot in Bexhill-on-Sea. The project, identified as ESPH753, is valued at 1,610,400 GBP including VAT and is estimated to run from January 26, 2027, to July 30, 2027. The facility will support the Biffa-operated waste collection fleet under the Joint Waste Partnership. A critical requirement of this contract is the maintenance of continuous operational use of the site. The contractor must ensure that the statutory waste services are not interrupted and must coordinate shared access on Elva Way with Biffa vehicles. The evaluation process follows a three-stage approach, beginning with a pass/fail assessment of participation conditions, followed by a weighted evaluation of price at 60 percent and quality at 40 percent, and concluding with a final verification of the preferred bidder. Tenders must be submitted electronically via the East Sussex Procurement Hub portal by December 7, 2026.

Rother District Council

POSTED

7 days ago

DEADLINE

in about 1 month

General Info

Agency

N/A

NAICS

236210 - Industrial Building Construction

Place of Performance

3500 Pennsy DriveLandover, MD

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 8

Presolicitation

Response DeadlineSep 7

Deadline has passed

Submission Closed

09/07/2005, 05:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Karen A. McSweenContract Administrator

contact@example.gov

+1 (555) 000-0000

Full Description

WASHINGTON METROPOLITAN AREA TRANSIT AUTHORITY IFB-FN5074/KAM - Bus Body Shop Modifications (Bus II) Pennsy Drive Facility WMATA is soliciting sealed bids for the contractor to furnish all labor, materials, storage, permits, transportation, and other items necessary to modify the Bus II Maintenance building and property at the Pennsy Drive Facility to allow for body work, painting, and service of Diesel and Compressed Natural Gas (CNG) busses and for service, maintenance, and storage of non-revenue vehicles. The Contractor shall be responsible for completion of the work as indicated in the Specifications and on the Contract Drawings. The contract is broken into a Base Bid and eleven (11) Options. Estimated cost range is over $10,000,000. Work to be completed within 270 Calendar Days after NTP. There will be a pre-bid conference at 9:00 a.m. on Friday, August 26, 2005 at the Pennsy Drive Facility, 3500 Pennsy Drive, Landover, MD. Bid opening o/a September 7, 2005. Contract specifications and drawings will be available o/a August 10, 2005 for a fee of $50. To purchase specifications and plans, call +1 (555) 000-0000 Ext. 231 or 246; fax +1 (555) 000-0000 or write to WMATA Plans Room, 900 Franklin Street, NE, Washington, D.C. 20017. Questions, e-mail Karen A. McSween at contact@example.gov. To qualify for an award, all vendors must be registered in the WMATA Vendors Registration System (VRS). To register, visit our website at Http://vrs.wmata.com. For registration assistance, please call Ms. Vastie Presley at +1 (555) 000-0000 or e-mail contact@example.gov.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS