Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Zinc Coating and Finishing Services

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized zinc coating and plating services for 12 forged steel shackles to support prime contractors on DLA Weapons Support ASC projects. The primary objective is to ensure corrosion resistance through a mercury-free application process. To qualify, the service provider must utilize industrial plating tanks and maintain certification according to SAE AS9003 or ISO 9001 standards. The project requires strict adherence to military specifications for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Performance will take place in Tracy, California, under the oversight of the Department of Defense. Interested parties must respond by October 23, 2026, to provide the final delivery of the 12 coated shackles.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPEA45-27-T-1324.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHACKLE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies zinc coating and plating services for 12 forged shackles for prime contractors on DLA Weapons Support ASC projects. Applies zinc coating to forged steel to meet corrosion resistance requirements without the use of mercury. Requires industrial plating tanks and compliance with SAE AS9003 or ISO 9001. Packages and marks items per MIL-STD-2073-1E and MIL-STD-129. Delivers 12 coated shackles.

Similar Contracts

Same NAICS industry code

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Heat Treatment and Surface FinishingThis subcontract, issued by the Department of Defense under the DLA Weapons Support Electrical Devices Division, involves providing specialized heat treatment and surface finishing services for connecting rods. The scope of work includes hardening, polishing, and plating processes designed to ensure all components meet strict Rockwell hardness and tensile strength specifications. The contractor must strictly adhere to DLA quality requirements and comply with DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. This opportunity falls under NAICS code 332813, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 22 hours ago

DEADLINE

Precision Coating and Surface Treatment

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract for Aerospace Component Finishing and Plating involves providing specialized surface treatment and plating services for prime contractors supporting the DLA Weapons Support ASC. The scope of work focuses on applying aerospace coatings or plating to machined rings identified by NSN 5365-00-349-2487. All work must be performed in industrial plating and chemical treatment facilities to ensure strict adherence to AMS or MIL-SPEC finishing standards, with mandatory verification of coating thickness and adherence. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Tracy, California. Interested parties must note the response deadline of October 23, 2026. The contract falls under NAICS code 332813 and requires the delivery of finished rings that meet all specified technical data and quality requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Hardware Finishing and Coating

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

MIL-STD-1330D Oxygen Cleaning Service

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Surface Treatment and Finishing for Check Fill UnitThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized surface treatment and finishing for Check Fill Unit hardware. The selected contractor will be responsible for applying powder coating, plating, or anodizing to components in strict accordance with Basic Drawing NR 78286 S1670-15000. All work must ensure that adhesion and finish thickness comply with MIL-SPEC requirements, and the contractor is tasked with the safe management of hazardous materials following all applicable environmental regulations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in New Cumberland. Interested parties must respond by October 23, 2026. The primary objective of the engagement is the successful delivery of finished and coated components that meet the rigorous technical standards required for prime contractor hardware projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Aerospace Plating and Surface TreatmentThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves providing specialized surface treatment services for landing light shaft assemblies. The selected contractor will be responsible for chemical cleaning and the application of protective coatings, including anodizing or plating with cadmium, chrome, or nickel, to prevent corrosion in accordance with strict aerospace and MIL-SPEC standards. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure all deliverables meet the required surface treatment specifications. The work is associated with NAICS code 332813 and will be performed in New Cumberland. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves performing surface treatments and protective coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the application of finishes to structural aircraft panels in accordance with Drawing EI-016480307, with the final delivery of finished, coated panels. Performance of these services will take place at Tinker AFB. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation for aerospace finishing. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Specialized Surface Treatment and Finishing for Aerospace FastenersThis subcontract involves providing specialized surface treatment and finishing for aerospace fasteners to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for applying coatings or finishes to bolts using industrial plating tanks or passivation baths, strictly adhering to the specifications outlined in Drawing 19207 12600930. The final deliverables must be fully coated and ready for final inspection. The project is managed under the Department of Defense and requires strict adherence to ISO 9001 quality standards and ITAR/EAR export control compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, to be considered for this specialized industrial plating and finishing effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

Aerospace Grade Fastener Finishing and CoatingThis subcontract for Aerospace Grade Fastener Finishing and Coating involves providing specialized surface treatment, plating, and coating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of protective coatings to bolts using industrial plating tanks, strictly adhering to NASM3 through NASM20 Revision 5 and NAS6803 through 6820 Revision 11 standards. The final deliverables must be finished, coated bolts that are ready for final inspection. To ensure critical application quality, the contractor must hold either ISO 9001 or SAE AS9003 certification. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Lampholder (NSN 6250005911105)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier OEM Division, requires the sourcing or fabrication of one lampholder, part number 31-1095-1, meeting NSN 6250005911105 specifications. The contractor must adhere to strict quality control standards under ISO 9001:2015 and perform sampling according to MIL-STD-1916 or ASQ H1331. Packaging and labeling must comply with MIL-STD-2073-1E and RP001 guidelines. The contract mandates full compliance with the Buy American Act and the Berry Amendment, and explicitly prohibits the use of 3D printing for the component. Performance will take place in Greensboro, North Carolina. Interested parties must respond by October 23, 2026, to provide the single packaged unit as specified.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Dial Indicating Pressure GagesThis subcontract involves the procurement or manufacture of 82 specialized dial indicating pressure gages for prime contractors supporting DLA supply contracts. The required units must adhere to Thuemling Industrial Products Inc part number 4306148 and NSN 6685-01-506-1061. All items must be delivered FOB Origin to DLA Distribution facilities, with performance taking place in Barstow, California. Strict compliance with technical standards is required, including packaging and marking per MIL-STD-129, RP001, and ASTM D3951. Quality acceptance will be governed by MIL-STD-1916 or ASQ H1331. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline of October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

Precision Machining/Fabrication of Aerospace BracketsThis subcontract involves the precision machining and fabrication of two mounting brackets for prime contractors supporting DLA Weapons Support ASC projects. The contractor must manufacture the brackets according to Boeing Part Number 69-37417-6 specifications, utilizing aerospace-grade equipment and precision CNC machining. Strict compliance is required regarding Critical Application Item quality controls and Berry Amendment material standards. Additionally, the performing entity must maintain ISO 9001:2015 certification and CMMC Level 2 compliance to meet the security and quality mandates of the Department of Defense.

POSTED

about 22 hours ago

DEADLINE

Supply of Boeing Mounting Brackets (NSN 5340-01-603-9197)This subcontract involves the procurement and delivery of Boeing Part Number 69-37417-6 mounting brackets for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the supplier to provide two commercial off-the-shelf brackets, ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards, with palletization adhering to DLA requirement RP001 for both international and domestic military transport. To be eligible for this contract, the supplier must maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. The opportunity is managed by the Department of Defense under NAICS code 423840, with a response deadline set for October 23, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for aerospace components destined for the DLA Weapons Support ASC. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. To ensure the survival of components during transit, the contractor must utilize approved MIL-SPEC cushioning and preservative materials. The project specifically entails the packaging and palletization of three units for delivery to Tinker AFB. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Cable Breakout Adapters (NSN 5935-01-668-9632)This subcontract involves the manufacture or sourcing of eight Cable Breakout Adapters, specifically GE Aviation Systems part number 765090-006 under NSN 5935-01-668-9632. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All finished units must be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To ensure compliance, the contractor must maintain an ISO 9001:2015 quality system and meet CMMC Level 2 security requirements. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects at Hill AFB. The scope of work involves executing specialized packaging and marking for shipping containers, specifically adhering to MIL-STD-2073-1E, RP001, and MIL-STD-129. Key technical requirements include the application of Special Marking Code 06 for delicate instruments, the use of preservation method Pres Mthd+41, and the utilization of MIL-SPEC marking equipment and approved cushioning materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 339999. The contract requires the delivery of fully packaged and marked containers that are ready for immediate transport. Interested parties should note the response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Power Transformer Supplier (Honeywell PN 51080031-1)This subcontract involves the procurement of 39 power transformers, specifically Honeywell Aerospace International Inc. part number 51080031-1, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act. All units must undergo verification via precision testing equipment to ensure power specifications are met, with a requirement for zero non-conformances based on MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The final delivery of the 39 transformers is designated as FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 335999 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the procurement of aerospace-grade raw metal stock for prime contractors. The scope of work requires the delivery of certified bar or ring stock that strictly adheres to NSN 5365-00-349-2487 specifications. To ensure quality and compliance, the supplier must provide comprehensive Material Test Reports and Certificates of Conformance for all delivered materials. The contract is categorized under NAICS code 331210 and mandates strict adherence to DFARS 252.225-7001 Buy American requirements. Performance for this contract will take place in Tracy, California. Interested parties must submit their responses by the deadline of October 23, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 22 hours ago

DEADLINE

Precision Machining of Externally Threaded RingsThis subcontract involves the precision machining of three externally threaded rings, identified by NSN 5365-00-349-2487, for critical aircraft applications under the DLA Weapons Support ASC. The selected provider must utilize high-precision CNC lathes to turn and thread the components to exact tolerances while adhering to MIL-STD-1916 or ASQ H1331 sampling plans. The project is managed by the Department of Defense and requires strict compliance with DFARS 252.204-7012. Performance will take place in Tracy, California, under NAICS code 332710. Interested parties must respond by October 23, 2026.

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS