Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Surface Treatment and Finishing for Aerospace Fasteners

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized surface treatment and finishing for aerospace fasteners to support prime contractors on DLA Weapons Support ASC projects. The selected provider will be responsible for applying coatings or finishes to bolts using industrial plating tanks or passivation baths, strictly adhering to the specifications outlined in Drawing 19207 12600930. The final deliverables must be fully coated and ready for final inspection. The project is managed under the Department of Defense and requires strict adherence to ISO 9001 quality standards and ITAR/EAR export control compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, to be considered for this specialized industrial plating and finishing effort.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-4798.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, EXTERNALLY RELIEV

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface finishing, plating, or coating for prime contractors on DLA Weapons Support ASC projects. Applies coatings or finishes as specified in Drawing 19207 12600930 using industrial plating tanks or passivation baths. Requires ISO 9001 and ITAR/EAR export control compliance. Delivers finished and coated bolts ready for final inspection.

Similar Contracts

Same NAICS industry code

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Heat Treatment and Surface Finishing

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract for Aerospace Component Finishing and Plating involves providing specialized surface treatment and plating services for prime contractors supporting the DLA Weapons Support ASC. The scope of work focuses on applying aerospace coatings or plating to machined rings identified by NSN 5365-00-349-2487. All work must be performed in industrial plating and chemical treatment facilities to ensure strict adherence to AMS or MIL-SPEC finishing standards, with mandatory verification of coating thickness and adherence. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Tracy, California. Interested parties must note the response deadline of October 23, 2026. The contract falls under NAICS code 332813 and requires the delivery of finished rings that meet all specified technical data and quality requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Surface Treatment and Finishing for Check Fill UnitThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized surface treatment and finishing for Check Fill Unit hardware. The selected contractor will be responsible for applying powder coating, plating, or anodizing to components in strict accordance with Basic Drawing NR 78286 S1670-15000. All work must ensure that adhesion and finish thickness comply with MIL-SPEC requirements, and the contractor is tasked with the safe management of hazardous materials following all applicable environmental regulations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place in New Cumberland. Interested parties must respond by October 23, 2026. The primary objective of the engagement is the successful delivery of finished and coated components that meet the rigorous technical standards required for prime contractor hardware projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aerospace Plating and Surface TreatmentThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves providing specialized surface treatment services for landing light shaft assemblies. The selected contractor will be responsible for chemical cleaning and the application of protective coatings, including anodizing or plating with cadmium, chrome, or nickel, to prevent corrosion in accordance with strict aerospace and MIL-SPEC standards. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure all deliverables meet the required surface treatment specifications. The work is associated with NAICS code 332813 and will be performed in New Cumberland. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves performing surface treatments and protective coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the application of finishes to structural aircraft panels in accordance with Drawing EI-016480307, with the final delivery of finished, coated panels. Performance of these services will take place at Tinker AFB. To be eligible, contractors must maintain ISO 9001:2015 certification and typically require NADCAP accreditation for aerospace finishing. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Aerospace Grade Fastener Finishing and CoatingThis subcontract for Aerospace Grade Fastener Finishing and Coating involves providing specialized surface treatment, plating, and coating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of protective coatings to bolts using industrial plating tanks, strictly adhering to NASM3 through NASM20 Revision 5 and NAS6803 through 6820 Revision 11 standards. The final deliverables must be finished, coated bolts that are ready for final inspection. To ensure critical application quality, the contractor must hold either ISO 9001 or SAE AS9003 certification. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Specialized Industrial Coating and FinishingThis subcontract for Specialized Industrial Coating and Finishing supports DLA Troop Support Food Service Equipment projects under the Department of Defense Subsistence FSE Supply Chain. The selected provider will perform high-temperature coating and polishing for prime contractors, specifically applying powder coatings, heat-resistant paints, or stainless steel passivation to finished oven components. All work must be executed using industrial powder coating ovens and chemical passivation tanks in strict accordance with TDP Rev A Gen 1, ASTM standards, and DLA quality requirements. The opportunity is categorized under NAICS code 332813 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of October 23, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and Coating for Fuel ValvesThis subcontract involves providing specialized surface treatments, plating, and anodizing for fuel system projects managed by the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for applying coatings to valve components using chemical plating baths and anodizing tanks in strict accordance with TDP Rev A Gen 1 to ensure aerospace standards for wear and corrosion resistance are met. The work will be performed in Jacksonville, Florida, under NAICS code 332813. A critical requirement of the contract is the management of hazardous materials as mandated by FAR 52.223-7. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and Non-Destructive TestingThis subcontract for Aerospace Surface Treatment and Non-Destructive Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. The scope of work involves providing specialized coating, plating, and non-destructive testing for pylon mounts, ensuring all aerospace-grade finishes adhere to technical data packages and FED-STD-313 hazardous material standards. The contractor is responsible for utilizing NDT equipment to maintain critical quality assurance and delivering fully certified finished components. The project is categorized under NAICS code 332813 and will be performed in Cherry Point, North Carolina. Interested parties should note the posting date of October 15, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves performing specialized surface treatments and coatings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on applying chemical processing and aerospace-grade finishes to structural aircraft panels in strict accordance with Boeing BAC process specifications. All deliverables must be processed and delivered as surface-treated aircraft panels. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and hold either ISO 9001 or AS9100 certification. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Zinc Coating and Finishing Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Specialized Electrical Component SupplyThis subcontract for Specialized Electrical Component Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves providing specialized wiring and connectors to prime contractors, with all materials sourced according to TDP Rev A Gen 2 and Drawing NR 30554 series. The contractor is responsible for delivering raw materials and connectors to the assembly manufacturer and providing necessary certifications of compliance for all components. Strict adherence to the Buy American Act and Berry Amendment is required for all supplied materials. The project is associated with NAICS code 335220 and is designated for performance at Fort Leonard Wood. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Major Household Appliance Manufacturing

POSTED

about 21 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with TDP Rev A Gen 2 and Drawing NR 30554 04-40199, with specific requirements for wiring and termination based on the DLA Master List. Quality assurance and marking must adhere to MIL-STD-1916 and MIL-STD-129 standards, respectively, and the contractor must maintain compliance with DFARS 252.204-7012. The project is categorized under NAICS code 335999 and will be performed at Fort Leonard Wood. The scope of work concludes with the delivery of fully completed and tested cable assemblies. Interested parties should note the response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 21 hours ago

DEADLINE

Manufacture of Solid Rivets (NSN 5320-00-638-9059)This subcontract involves the manufacture of solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of rivets according to standards NASM20426, NASM5674, and drawing NR 13873 EI-006389059, utilizing precision cold-heading or machining equipment. A total of 4 lbs of finished rivets must be delivered, packaged in accordance with ASTM D3951 and MIL-STD-129, with performance taking place at Tinker AFB. Qualified providers must hold SAE AS9003 or ISO 9001 quality certification and ensure full compliance with the Buy American Act and the Berry Amendment. The use of additive manufacturing is strictly prohibited for this contract. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical pump components, specifically three sleeve bearings, ensuring full compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Technical requirements include the application of preservation method 33, cleaning and drying method 1, and the use of G8 wrap material, utilizing specialized military-grade marking equipment. The completed deliverables are to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Manufacturer of Sleeve Bearings (NSN 3120-00-336-9385)This subcontract involves the manufacture and supply of three precision-machined sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced according to NSN 3120-00-336-9385 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. To ensure quality and safety, the manufacturer must use precision equipment to guarantee materials are mercury-free and maintain certification in SAE AS9100, SAE AS9003, or ISO 9001. The project is categorized under NAICS code 332991, with performance taking place in New Cumberland. The finished sleeve bearings are to be delivered FOB Origin. Interested parties must respond by October 23, 2026, regarding this Department of Defense requirement.

Ball and Roller Bearing Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation Services

Motor Vehicle Towing

POSTED

about 21 hours ago

DEADLINE

Manufacturer of Inner Bearing Rings (NSN 3110-01-065-9772)

Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Ambient Temperature Sensors (NSN 6685-01-443-4207)This subcontract involves the manufacture or sourcing of 22 warranted ambient temperature sensors for prime contractors supporting the Department of Defense. The sensors must strictly adhere to NSN 6685-01-443-4207 and Reference Drawing NR 99207 5107T18, Revision B. Final delivery of the units is required at DLA Distribution Jacksonville. To be eligible, providers must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. All shipments must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. The contract is managed under the DLA Weapons Support ASC Commodities Division.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 21 hours ago

DEADLINE

Supply of Specialized Metal Stock for Fastener ProductionThis subcontract involves the supply of specialized raw metal rod or wire stock intended for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the specifications outlined in drawing 56161 10503412 and be delivered directly to the manufacturer. To ensure regulatory compliance, the provider must furnish Mill Test Reports verifying that the specialty metals are domestically sourced in accordance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Manufacture of Headed Straight Pins (NSN 5315-12-324-2779)This subcontract involves the manufacture of 41 certified headed straight pins, identified by NSN 5315-12-324-2779, for prime contractors delivering to DLA distribution centers. The production process requires the use of precision heading and cutting machinery within a mercury-free environment, ensuring strict adherence to DIN 1436 and drawing 56161 10503412. The project mandates rigorous quality control and compliance standards, including SAE AS9003, ISO 9001, and MIL-STD-1916. Additionally, all items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129. The work is associated with the Department of Defense under the DLA Weapons Support ASC Commodities Division and is to be performed in New Cumberland.

Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing military-grade packaging and marking services for high-precision aircraft components, specifically bushings, on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for shipment marking. All materials used must meet military specifications to ensure components are ready for transit. The project is performed in San Diego, with final delivery handled as FOB Origin to DLA Distribution San Diego. This opportunity falls under NAICS code 488410 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

Motor Vehicle Towing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS