Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

BRENNAN DIESEL

UEI: RM3JN5ELYHX1

BRENNAN DIESEL is a federal contractor, registered under UEI RM3JN5ELYHX1. It has been awarded $2,214,641 in federal contracts. Primary work spans Ship Building and Repairing, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, and Other Automotive Mechanical and Electrical Repair and Maintenance. Top awarding agencies include Department Of Homeland Security, Department Of Defense, and Department Of The Interior.

Contact Information

Registration and classification details

Registration

UEI Code

RM3JN5ELYHX1

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

56

All time

Active

0

Currently performing

Completed

56

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Homeland Security$1.7M76.1%Department Of Defense$224.7K10.1%Department Of The Interior$164.1K7.4%Department Of Transportation$140.9K6.4%

Awards by NAICS

336611 - Ship Building and Repairing$994.6K44.9%811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance$844.3K38.1%811118 - Other Automotive Mechanical and Electrical Repair and Maintenance$89.3K4%488190 - Other Support Activities for Air Transportation$56.8K2.6%335312 - Motor and Generator Manufacturing$54.1K2.4%

- Unknown NAICS$46.5K2.1%

336312 - Gasoline Engine and Engine Parts Manufacturing$41.5K1.9%336399 - All Other Motor Vehicle Parts Manufacturing$33.6K1.5%333611 - Turbine and Turbine Generator Set Units Manufacturing$21.0K1%332710 - Machine Shops$11.7K0.5%

Others - Other NAICS codes (4 codes, <0.5% each)$21.3K1%

Awards by Agency Over Time

Awards by Place of Performance

Compete with BRENNAN DIESEL

Track the contractors you bid against, and the work they win

Award history, agency mix, and NAICS coverage for BRENNAN DIESEL

AI-powered matching against your own capabilities and past performance

Teaming and subcontracting signals on every award

Automated alerts when a competitor wins in your market

Join 750+ contractors already using CLEATUS

Open opportunities in BRENNAN DIESEL's top NAICS codes and agencies

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

AC Motor Manufacturing (CLIN 0001)

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

Manufacture of 2nd Stage Tie Rod Spacers

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

CONTROL-MONITOR SET

Solicitation # SPRMM1-26-Q-KE32

Solicitation SPRMM1-26-Q-KE32 is a request for quotations issued by DLA Mechanicsburg for the procurement of two motor-tachometers, identified by NSN 7HH 6105-01-070-2527. The requirement is for a fixed-price delivery with a requested delivery date of ASAP and FOB Destination terms. This is not a small business set-aside, and award will be made based on the Lowest Price Technically Acceptable (LPTA) criteria to a responsible offeror who complies with all solicitation instructions and terms. The contractor is responsible for inspection and acceptance at the origin and must adhere to strict packaging and marking standards, including MIL-STD-2073 and MIL-STD-129. All electronic invoicing and receiving reports must be submitted through PIEE-WAWF. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number, and may be required to provide traceability evidence. The procurement includes various federal and defense clauses regarding cybersecurity, the Buy American Act, and prohibitions on additive manufacturing unless specifically authorized.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

PANEL,CONTROL,ELECT

Solicitation # N0038326QAA77

Solicitation NO0383-26-Q-AA77, issued by NAVSUP Weapon Systems Support, seeks a contractor to provide repair, overhaul, and modification services for electrical control panels (NSN 6110-01-433-5020). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return units to a Ready For Issue condition. Key technical requirements include adherence to MIL-STD-130 for markings, the prohibited use of MIL-W-81381 wire in favor of SAE-AS22759, and compliance with ISO 9001/SAE AS9100 quality standards. The scope includes strict protocols for handling items determined to be Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as the more important factor. Deliveries are expected within 90 days, with Repair Turnaround Time measured from asset return to acceptance at the origin. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for electrostatic protection and Depot Level Repairable labeling. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The resulting contract will be a DO rated order certified for national defense.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

ALTERNATING CURRENT MOTOR, DLA SOLICITATION SPRMM1-26-Q-MF38

Solicitation # SPRMM1-26-Q-MF38

Solicitation SPRMM1-26-Q-MF38 is a request for quotations issued by DLA Mechanicsburg for the procurement of one Alternating Current Motor (NIIN 014728614). The requirement specifies that the item must be new and unused, conforming to the design represented by Cage Code 75477 and reference number 801621-130 GRP 2. Delivery is required within 30 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with technical acceptability based on compliance with solicitation instructions and the absence of exceptions to the terms. Offerors must categorize their product as an exact, alternate, superseding, or previously approved item. Distributors or dealers are required to provide traceability documentation to be considered a valid source, with evidence of technical acceptability due within two days of request. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and IUID compliance. Invoicing and payment processing must be conducted through the Wide Area WorkFlow (WAWF) system. Additionally, any hazardous materials must be identified via Safety Data Sheets and GHS compliant labels submitted to the contracting officer prior to award.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

SHAFT,TURBINE,NONAI

Solicitation # SPRPA127QXA30

Solicitation SPRPA1-27-Q-XA30 is a fixed-price requirement issued by the Department of Defense, specifically the Pa DLA Aviation At Philadelphia, for the procurement of three units of a non-AI turbine shaft (NSN 0RH 2835-01-714-4741). This item is designated as a critical safety item, necessitating strict adherence to quality standards, including a requirement for the contractor to maintain ISO 9001 certification or higher. Inspection and acceptance will occur at the origin. The award will be made to a single, responsible, and technically acceptable offeror based on a best-value determination where past performance is considered more important than price. The contract includes comprehensive requirements for packaging and marking in accordance with MIL-STD-2073 and MIL-STD-129, with specific labeling instructions for Depot Level Repairable items. Payment and invoicing must be processed electronically through the Wide Area Workflow system using a combined invoice and receiving report. Key regulatory compliance measures are integrated into the solicitation, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and specific provisions for the transportation of supplies by sea. The primary point of contact for this effort is Sean Geiger.

Pa DLA Aviation At Philadelphia

POSTED

about 4 hours ago

DEADLINE

PANEL,CONTROL,ELECT

Solicitation # N0038326QAA84

Solicitation N0038326QAA84, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the repair, overhaul, and upgrade of electrical control panels (NSN 6110-01-472-3531). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return assets to a Ready For Issue condition, as the government will not provide manufacturing aids or special test equipment. Key technical requirements include adherence to MIL-STD-130 for markings, MIL-STD-2073 for packaging, and a strict prohibition on the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The required repair turnaround time is 100 days after receipt of the asset. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Contractors must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract includes specific protocols for Beyond Economical Repair and Missing on Induction determinations, both requiring written concurrence from DCMA. Invoicing and receiving reports must be processed through Wide Area Workflow, with final inspection and acceptance occurring at the contractor's location.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

PANEL,CONTROL,ELECT

Solicitation # N0038326QAA83

Solicitation NO0383-26-Q-AA83, issued by NAVSUP Weapon Systems Support, is a request for quotations for the teardown, evaluation, repair, and modification of Electrical Control Panels (NSN 6110-01-472-3513). The objective is to return these units to a Ready For Issue condition through a process of inspection, component replacement, and testing. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Key technical constraints include a strict prohibition on MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead, and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contract establishes a Repair Turnaround Time of 80 days after receipt of assets, with an induction expiration date set for 365 days after award. Performance is governed by high quality standards, requiring a quality management system compliant with ISO 9001/SAE AS9100 and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The government utilizes a specific process for Beyond Economical Repair and Missing on Induction determinations, requiring written concurrence from DCMA. Award will be made to a single, technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as the more important factor.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Fuel Dispenser Technical Installation & Repair

Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)

Solicitation # RF-32079-AS

Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.

Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

Fisher Recirculation Valve and Actuator DCI and Overhaul

City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month

WEG Industrial Motor DCI and Overhaul

City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Sulzer Boiler Feedwater Pump DCI and Overhaul

City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves

Solicitation # 5740

The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.

City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Pump Refurbishment (Add-Alternate No. 3)

Nassau Community College

POSTED

about 12 hours ago

DEADLINE

Supply of Portable Diesel Generators

Defense Veterans & Emerg Management

POSTED

about 12 hours ago

DEADLINE