Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

COLUMBUS FENCE CO, LLC

UEI: DVNZXGNUKWG7CAGE: 0ZP77

COLUMBUS FENCE CO, LLC is a federal contractor, registered under UEI DVNZXGNUKWG7 and CAGE code 0ZP77. It has been awarded $1,281,929 across 30 federal contracts. Primary work spans All Other Specialty Trade Contractors, Unknown NAICS, and Ornamental and Architectural Metal Work Manufacturing. Top awarding agencies include Department Of Defense, Department Of Agriculture, and Department Of The Interior.

Contact Information

Registration and classification details

Registration

UEI Code

DVNZXGNUKWG7

CAGE Code

0ZP77

Entity Structure

Partnership or Limited Liability Partnership

Established

N/A

Business Classifications

2XA2LJ

NAICS Codes

238290Other Building Equipment Contractors
238990All Other Specialty Trade Contractors(Primary)
332618Other Fabricated Wire Product Manufacturing

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

AI Capability Profile

Columbus Fence Co, LLC specializes in the design, installation, and maintenance of high-security fencing systems for federal facilities, with demonstrated expertise in perimeter protection and access control infrastructure. Their technical capabilities encompass the fabrication and deployment of wel...

Columbus Fence Co, LLC specializes in the design, installation, and maintenance of high-security fencing systems for federal facilities, with demonstrated expertise in perimeter protection and access control infrastructure. Their technical capabilities encompass the fabrication and deployment of welded wire fencing, chain-link systems with anti-climb features, gate assemblies, and related security hardware compliant with federal physical security standards. The company brings precision in site-specific installation, soil remediation for foundation integrity, and coordination with utility and drainage systems to ensure long-term durability and regulatory compliance. As a Woman-Owned Business, Columbus Fence Co. brings a commitment to quality craftsmanship and responsive project execution, distinguishing itself through attention to detail in mission-critical security environments. The contractor has delivered security fencing solutions for the U.S. Department of Agriculture, indicating established experience in federal land management and agricultural facility security. Their work supports USDA’s need for secure perimeters around research stations, livestock facilities, and administrative campuses, where fencing serves both physical deterrence and environmental boundary control. This relationship suggests a pattern of repeat engagement in rural and remote federal sites requiring durable, low-maintenance security infrastructure. Columbus Fence Co. operates under NAICS 238990, which encompasses all other specialty trade contractors not classified elsewhere—specifically focusing on custom, non-standardized security fencing applications. This positions them as a niche provider for federal agencies requiring tailored perimeter solutions beyond standard commercial offerings, particularly in sensitive or environmentally constrained locations. The company is headquartered in Columbus, Mississippi, and is certified as a Woman-Owned Business, enhancing its eligibility for targeted federal contracting programs. While geographically localized, its work supports nationwide federal security requirements, with capabilities aligned to federal construction and security specifications.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency
Department Of Defense$514.6K40.1%
Department Of Agriculture$469.7K36.6%
Department Of The Interior$122.0K9.5%
Department Of Transportation$77.0K6%
Department Of Homeland Security$58.4K4.6%
Department Of Justice$22.1K1.7%
Department Of Defense (dod)$18.1K1.4%
Awards by NAICS
Export
238990 - All Other Specialty Trade Contractors$1.1M84.3%
235990 - Unknown NAICS$78.8K6.2%
332323 - Ornamental and Architectural Metal Work Manufacturing$39.1K3.1%
238290 - Other Building Equipment Contractors$30.1K2.4%
23599 - Unknown NAICS$24.0K1.9%
236220 - Commercial and Institutional Building Construction$18.1K1.4%
332618 - Other Fabricated Wire Product Manufacturing$11.4K0.9%
Awards by Agency Over Time
Export
Awards by Place of Performance

Open opportunities in COLUMBUS FENCE CO, LLC's top NAICS codes and agencies

NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-618L
The contract solicitation SPE4A7-26-T-618L is for the procurement of 3,250 units of a quick-release pin identified by NSN 5315-01-525-4843 and part number QRD3B1025Z, classified as a commercial item. The unit price is $3.25, resulting in a total contract value of $10,562.50, with delivery required 113 days after order placement, no later than December 16, 2026, and a need ship date of July 23, 2026. Deliveries are FOB origin with inspection and acceptance occurring at the destination, specifically at the DLA Distribution Albany facility in Albany, Georgia. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, prioritizing the DLA Master List of Technical and Quality Requirements over any conflicting standards. Palletization must adhere to RP001, and all items must be marked with the correct unit of issue and quantity per unit pack. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, with verification levels and AQLs strictly aligned to critical, major, and minor attributes. The item is designated as a critical application item and is subject to stringent documentation controls, including source approval and physical identification per RC001 and RQ017. The contract mandates full compliance with hazardous material handling requirements under 29 CFR 1910.1200 and DFARS 252.223-7001, requiring pre-award submission of safety data sheets and ongoing updates for any material changes. Electronic invoicing must be processed through WAWF, and the contractor must adhere to all applicable federal regulations including employment eligibility verification, combating trafficking in persons, sustainable products, cybersecurity safeguarding, and export control prohibitions. The contract includes clauses for small business representation, accelerated payments to small business subcontractors, whistleblower protections, and limitations on use of certain telecommunications equipment. All submissions must be made electronically through the DLA Internet Bid Board System by the August 13, 2026 deadline, and the government retains unlimited rights to data and technical information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE, NONELECTRICAL
Solicitation # SPE8E9-26-T-3283
This contract specifies the procurement of nonelectrical wire made from cold-drawn, passivated 302-grade stainless steel with a diameter of 0.041 inches and a total length of 217 feet per spool, weighing approximately one pound per spool. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including adherence to ASTM A580/A580M-23, SAE AMS2806, and NASM20995 Rev 2 standards. The wire must be supplied in whole-foot lengths only, with continuous identification markings on each unit including the DLA contract delivery order number, NSN, specification revision, alloy, manufacturer details, heat and lot numbers, and dimensions. Markings must be applied via stamping or stenciling using waterproof, noncontaminating fluids and must remain legible under normal handling. Adhesive labels are required on both sides of the spool, and tags are acceptable for wire units. A Certificate of Quality Compliance, or mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special preservation code ZZ per ASTM A700, and palletization must follow DLA packaging requirements. The item is classified as a commercial item and a critical application item, requiring compliance with the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award unless a formal deviation is declared. Failure to meet any marking, certification, or supplier qualification requirement may result in rejection of the product. The total quantity is 2,798 pounds across eight delivery lines with varying quantities and destinations, including depots in Barstow, Albany, Cherry Point, Jacksonville, Hill AFB, San Diego, Tinker AFB, and New Cumberland. Delivery is due within 67 days FOB origin, with a 10% variance allowed on quantity. Inspection and acceptance occur at destination, and all documentation must align with the contract number SPE8E9-26-T-3283 and associated technical data package revisions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-12SZ
The contract pertains to the procurement of PIN, SHOULDER, and HEADLE components under solicitation SPE4A6-26-T-12SZ, with a quantity of nine units requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sample lots unless contract exceptions apply. Mercury and mercury-containing compounds are strictly prohibited in any hardware or supply unless exempt for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or NAVSEA-recommended chemical reagents; portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, regardless of location; only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and DLA authorization may access such data. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and performance is directed to Portsmouth, NH, 03801-5000.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332323
New
DIBBS
HEATING BLANKET, ELECTR
Solicitation # SPE8E8-26-T-5034
A heating blanket, electrical, identified by NSN 4520015922651 and part number T00225-5083-2, is being procured under contract SPE8E8-26-T-5034 by DLA Dist San Joaquin for the Department of Defense. The requirement is for 13 units, each priced at $13.00, totaling $169.00, with delivery due in 167 days FOB origin, inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while all DLA Master List of Technical and Quality Requirements take precedence over applicable standards. Packaging and palletization must follow RP001: DLA Packaging Requirements for Procurement, and the unit of issue and quantity per unit pack are strictly controlled as specified in the contract. The delivery address is W62G2T, W1A8 DLA Dist San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy CA 95304-5000, with required shipment by February 1, 2027, and original delivery due by March 18, 2027. Transport instructions reference DLAD Proc Note C19 for transportation and C20 for first destination, and all supplies must comply with DLA’s provisions regarding removal of government identification from non-accepted items and potential application of Covered Defense Information. The procurement falls under NAICS code 332323 and was solicited on August 5, 2026, with responses due by August 17, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332323
New
DIBBS
HEATING BLANKET, ELECTR
Solicitation # SPE8E8-26-T-5017
The contract is for the procurement of nine electrical heating blankets, identified by NSN 4520015900756 and part number T00229-5083, under solicitation SPE8E8-26-T-5017 issued by DLA Dist San Joaquin. The unit price is $9.00 per unit, with a total contract value of $81.00, and delivery is required within 167 days after award, with an original delivery date set for March 17, 2027. All items must be delivered FOB origin, with zero variance allowed in quantity, and inspected and accepted at the destination facility located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements supersede this standard; labeling and marking must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The heating blankets are classified as covered defense information and must meet specific handling and identification protocols, including removal of government identifiers from non-accepted supplies. All technical and quality specifications referenced by R and I numbers are incorporated from the DLA Master List, with the applicable revision determined by the solicitation issue date. The required ship date is February 1, 2027, and transportation procedures follow DLAD Proc Notes C19 and C20. The contract was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332323 for electrical equipment manufacturing.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-12TS
The contract pertains to the procurement of 11 units of a headless, grooved pin with part number PE22027, supplied by Pearson Engineering Limited under approved source cage codes K0824, 1MQB3, and 1P06H. The item is classified as a critical application component and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Quality assurance protocols mandate sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA packaging guidelines. The item is identified by NSN 5315-99-602-7526 and is subject to a strict delivery schedule with a 128-day lead time, FOB origin, and acceptance at destination, with no variance permitted in quantity. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 20, 2026, and an original delivery date of February 7, 2027. The solicitation, issued under SPE4A6-26-T-12TS, was posted on August 5, 2026, with a response deadline of August 13, 2026. The unit price is $11.00 per unit for a total contract value of $121.00, and all documentation must reflect the DoD authorized unit of issue as defined by DLA standards.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332323
New
DIBBS
HEATING BLANKET, ELECTR
Solicitation # SPE8E8-26-T-5056
The contract solicits 13 electrical heating blankets, part number T00231-5083-2 from HDT Expeditionary Systems Inc, under NSN 4520-01-592-2658, with a unit price of $13.00 per unit and a total contract value of $169.00. Delivery is required at the DLA San Joaquin Receiver Warehouse in Tracy, California, with FOB Origin terms, and must be completed within 167 days from the solicitation award date, with an original delivery deadline of March 5, 2027. All items must be packaged in accordance with ASTM D3951 unless superseded by higher-priority DLA Technical and Quality Requirements, which are incorporated via reference to the DLA Master List of Technical and Quality Requirements identified by R or I numbers. Packaging and labeling must fully comply with MIL-STD-129, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination point, governed by FAR 52.246-1, which mandates destination inspection. The contract is issued under the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and falls under the Defense Logistics Agency’s automated acquisition framework, with potential for automated award if no first article testing is required. Offers must be submitted via the DIBBS portal by August 17, 2026, and failure to meet pass/fail gates such as using additive manufacturing or failing to submit required Safety Data Sheets for hazardous materials will render an offer ineligible. The contractor must comply with numerous FAR and DFARS clauses covering cybersecurity, export control, hazardous materials, whistleblower rights, procurement integrity, and electronic invoicing via WAWF. The Berry Amendment and Buy American Act apply, with the Berry threshold set at $150,000, and the order is designated as either DX or DO rated under the Defense Priorities and Allocations System. The contractor must represent compliance with SAM requirements, not provide covered telecommunications equipment, and adhere to NIST SP 800-171 cybersecurity standards. All supplies must be marked with government identification removed if non-accepted, and covered defense information protections under DFARS 252.204-7012 must be observed. Payment instructions follow Wide Area Workflow procedures and electronic submission of
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332323
New
DIBBS
HEATER, IMMERSION, LIQUI
Solicitation # SPE8E9-26-T-3343
The contract specifies the procurement of four immersion liquid fuel fired heaters identified by NSN 4520-01-467-0773 and part number 155-073098-003, with delivery required within 167 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, at a unit price of $4, totaling $16, with no variance permitted in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking standards per MIL-STD-129 without special marking codes. Palletization follows DLA packaging requirements, and transportation guidelines are governed by DLAD procedural notes C19 and C20. The heaters are subject to mercury prohibition unless used in exempt functional components such as batteries, fluorescent lamps, or sensors, with portable mercury-containing devices requiring shock-proof design and secondary containment as per NAVSEA 5100-003D. Covered defense information applies to specific suppliers, and the contract was issued under a total small business set-aside with NAICS code 332323. Technical and quality requirements referenced by R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The contract was solicited under SPE8E9-26-T-3343 with a response deadline of August 17, 2026, and the required ship date is February 1, 2027.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332323
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-5025
The contract is for the procurement of nine electric heating blankets with NSN 4520-01-590-0897 and part number T00231-5083, issued under solicitation SPE8E8-26-T-5025 as a total small business set-aside. The unit price is $9.00 per unit, with a total contract value of $81.00, and delivery is required within 167 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination facility, and all items must be packaged and marked in strict accordance with MIL-STD-129 and ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede ASTM standards. Packaging must also comply with RP001 and be palletized per DLA procurement guidelines. The shipment must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and an original delivery deadline of June 24, 2027. Transportation logistics follow DLAD Proc Notes C19 and C20, and all items must adhere to Defense Federal Acquisition Regulation supplements, including potential covered defense information requirements. Contract performance is governed by the DLA Master List version in effect on the solicitation issue date, and the solicitation closed on August 17, 2026, with the contract awarded to HDT Expeditionary Systems Inc.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe Port of Seattle through its Aviation Project Management Group is forecasting a procurement under NAICS code 236220 for the full design, permitting, and construction services to replace the Checkpoint 5 security grill. The scope encompasses a comprehensive range of activities including site assessment, development of design drawings and technical specifications compliant with TSA CRPG Section 3-5, submission for regulatory review and permit acquisition, demolition and proper disposal of the existing grill, fabrication and installation of the new system, and seamless integration with existing structural, electrical, and security badge access systems. Coordination with all relevant stakeholders is required to ensure adherence to safety and operational standards while minimizing disruption to airport functions. The project is structured under a design-build-bid delivery method and is being managed by the Port of Seattle with primary contact Yanet Maldonado and project manager Collette Deardorff available for inquiries. The solicitation was posted on July 31, 2026, and while no specific award date or set-aside details are provided, the location of performance is tied to the Port of Seattle’s facilities. All work must be executed with strict attention to federal security requirements and operational continuity in a high-traffic aviation environment.
Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe contract involves a comprehensive renovation and structural upgrade of the Customer Service Building at the Rental Car Facility to prepare for a new concession agreement and tenant construction beginning June 1, 2027. Key improvements include updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to support transit operations, renovating existing restrooms, and replacing outdated car wash equipment in the Quick Turn Around areas. Structural enhancements are also required to address cracking and repair post-tension cables, along with replacing expansion joints on the fifth floor plaza areas to ensure long-term durability and safety. These modifications are designed to modernize the facility and align its infrastructure with future operational needs. The project is managed by the Port of Seattle’s Aviation Project Management Group, with official point of contact Angela Peterson and Project Manager Julia Ruzon overseeing procurement and implementation. The work falls under NAICS code 236220, indicating commercial building construction, and is forecasted with a posted date of July 31, 2026. While no solicitation number or set-aside details are provided, the scope underscores a major capital improvement initiative focused on functionality, tenant readiness, and structural integrity for a high-traffic facility serving airport operations.
Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
Enlisted Unaccompanied Personnel Housing at Eglin AFB, FL
Solicitation # enlisted-unaccompanied-personnel-housing-eglin-afb-fl
The contract is for the construction of two two-story enlisted unaccompanied personnel housing barracks at Eglin Air Force Base, Florida, each designed to accommodate 120 personnel across 32 individual units. Each unit includes a kitchen, dining area, living space, and laundry room, while the buildings are equipped with shared amenities such as lobbies, elevators, entrance vestibules, exercise rooms, day rooms, lounges, and dedicated mechanical, electrical, and communications rooms. The project encompasses extensive sitework including parking lots for vehicles and motorcycles, roadways, concrete sidewalks, grading, a storm sewer system, utilities, landscaping, and incidental related tasks. Additional site amenities feature a large open pavilion, a basketball court, and a volleyball court. The scope of work spans multiple construction disciplines including demolition, sitework, concrete, masonry, steel, millwork, insulation, roofing, waterproofing, doors and hardware, glass and glazing, drywall, flooring, paint, specialties, elevators, plumbing, HVAC, fire protection, electrical, fencing, and asphalt paving. The solicitation is issued by Roy Anderson Corp as the general contractor through an Invitation to Bid, with a submission deadline of August 18, 2026, at 1:00 PM CT. The contract is set aside for small business participation and specifically encourages involvement from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Offerors must demonstrate compliance with federal equal opportunity requirements under Executive Order 11246, Section 503 of the Rehabilitation Act of 1973, and the Vietnam Era Veterans’ Readjustment Assistance Act of 1974, and are encouraged to engage subcontractors from Minority, Disadvantaged, Women’s, and HUBZone business enterprises. Proposals must include all necessary labor, materials, supervision, and equipment for the assigned scope and must be submitted via email to Patrice Lindman or by fax, with confirmed intent to bid required prior to the deadline.
Roy Anderson Corp

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details