Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Daikin Applied Americas Inc 13600 Industrial Park Blvd MINNEAPOLIS MN 55441-3743 USA

UEI: SLED_9D64AFA07F77F35E

Daikin Applied Americas Inc 13600 Industrial Park Blvd MINNEAPOLIS MN 55441-3743 USA is a federal contractor, registered under UEI SLED_9D64AFA07F77F35E. It has been awarded $192,599 across 2 federal contracts. Primary work spans Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing. Top awarding agencies include Commanding General.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_9D64AFA07F77F35E

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

$167.6K87%

Commanding General$25.0K13%

Awards by NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance$167.6K87%

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing$25.0K13%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in Daikin Applied Americas Inc 13600 Industrial Park Blvd MINNEAPOLIS MN 55441-3743 USA's top NAICS codes and agencies

Supply of Air Conditioner KitsThe contract outlines the procurement and delivery of four military-spec air conditioner kits to be supplied to the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance localized at NEW CUMBERLAND, Pennsylvania, under ZIP code 17070-5002. The kits must fully comply with hazardous materials reporting standards and include complete Safety Data Sheets (SDS) to ensure regulatory adherence and operational safety in military environments. This subcontract under NAICS code 333415 is open for response until August 17, 2026, with the solicitation posted on August 5, 2026, through the DIBBS system. All deliverables are expected to meet rigorous military specifications and documentation requirements, emphasizing environmental and safety compliance along with timely fulfillment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Duct-Type Air Cooling CoilsThe contract requires full manufacturing, assembly, and testing of duct-type air cooling coils in accordance with strict military specifications, ensuring compliance with TDP, MIL-STD-1916, MIL-STD-129, and MIL-STD-2073-1E for documentation, labeling, and packaging. All work must meet defense industry standards for quality, traceability, and delivery readiness. The performance location is specified as San Diego, CA, with a zip code of 92136-3581, and the North American Industry Classification System code is 333415, indicating specialization in heating equipment manufacturing. This is a subcontract opportunity issued under the Department of Defense, specifically through the CONSTRUCTION & EQUIPMENT MRO SVC I organization, with no set-aside designation applied. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Unable to Decompose Subcontract OpportunitiesDue to a system outage causing a 504 gateway timeout, the prime contract details required to identify and structure subcontract or supplier opportunities could not be retrieved. As a result, no specific subcontract opportunities are currently available for decomposition or bidding, despite the solicitation being officially posted under the title "Unable to Decompose Subcontract Opportunities." The opportunity is classified as a subcontract with a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses are eligible to respond, though no NAICS code, organization type, or point of contact information is provided to guide potential bidders. The solicitation was issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The posting date is August 5, 2026, and responses are due by August 17, 2026. No office address, city, state, or country information is available for the contracting office, and no direct point of contact is listed. Interested parties can access the solicitation details via the provided DIBBS link, but without prime contract context, the scope, requirements, or deliverables remain undefined.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Supply of Ice Maker Discharge Chute (NSN: 4130014128459)The contract requires the supply of a commercial off-the-shelf ice maker discharge chute component with National Stock Number 4130014128459, intended for use in military food service or refrigeration systems. The item must meet all applicable military specifications and be delivered with compliant packaging and documentation to ensure proper handling, identification, and traceability throughout the supply chain. The procurement is structured as a subcontract under the NAICS code 333415, indicating it pertains to heating, refrigeration, and commercial air conditioning equipment manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The place of performance is identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the contract is managed by the Department of Defense under the agency name Construction & Equipment MRO SVC I. While no specific set-aside type or point of contact is provided, the procurement is accessible via the DIBBS system, and all suppliers must adhere to the required technical, packaging, and documentation standards outlined in the military logistics framework to qualify for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Supply of Electrical Heating Elements, Non-Immersion TypeThe contract calls for the manufacture and delivery of 286 feet of non-immersion electrical heating elements that must fully comply with military and federal standards, ensuring reliability and safety in demanding operational environments. The scope includes all necessary packaging, labeling, and hazard communication requirements to meet regulatory and logistical specifications, with the products destined for performance in Bremerton, Washington, at a zip code of 98314-6001. The solicitation, categorized as a subcontract under NAICS code 333415, is issued by the Department of Defense through the PUGET SOUND office, with responses due by August 17, 2026, and the opportunity posted on August 5, 2026. All aspects of production and delivery must align with applicable defense procurement guidelines, and the successful vendor will be expected to provide complete documentation and certification to confirm adherence to required technical and safety protocols.

POSTED

about 8 hours ago

DEADLINE

Supply of Immersion Heaters – Liquid Fuel FiredThe contract calls for the supply of four commercial off-the-shelf liquid fuel-fired immersion heaters identified by NSN 4520014670773, with full responsibility for sourcing, manufacturing, and ensuring quality assurance standards are met. All units must be packaged in accordance with MIL-STD-129 specifications to ensure proper handling, identification, and readiness for military logistics systems. Delivery coordinates are specified to DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002, where the items will be received and integrated into the defense supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the intent to support small business participation in defense contracting. The NAICS code 333415 confirms the industry classification as heating equipment manufacturing, aligning the scope with specialized production capabilities. The solicitation opened on August 5, 2026, with proposals due by August 17, 2026, and is managed under the Department of Defense’s Construction & Equipment MRO Service I office, reflecting its role in maintaining and sustaining military equipment infrastructure.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

Supply of Air Cooler Unit (COTS)The contract is for the supply of one air cooler unit, part number FCU-H8-0.0KW-LVR, which must fully comply with all Department of Defense technical, packaging, and hazardous materials standards as defined by the Defense Logistics Agency. This is a subcontract under the NAICS code 333415, designated for the manufacture of other commercial and industrial machinery, and is specifically for a commercial off-the-shelf (COTS) product. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as San Diego, California, with the zip code 92136-3581. The contracting agency is the Department of Defense through its San Diego office.

POSTED

about 8 hours ago

DEADLINE

Condenser Assembly Manufacturing and SupplyThe contract calls for the manufacture and supply of a military-spec condenser assembly compliant with TDP Rev A Gen 1 and associated technical drawings, ensuring adherence to strict defense-grade specifications. The work is to be performed at the New Cumberland location with the ZIP code 17070-5002, and the procurement is structured as a subcontract under the NAICS code 333415, which pertains to other commercial and service industry machinery manufacturing. The solicitation was posted on August 5, 2026, with a response deadline set for August 17, 2026, indicating a competitive acquisition window of twelve days for potential vendors. The contracting activity is managed by the DDSP New Cumberland Facility under the Department of Defense, emphasizing the defense-critical nature of the required assembly and the necessity of precise technical execution.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

Condenser Coil Supply for Refrigeration SystemsThe contract calls for the supply of three condenser coils designed for refrigeration systems, with all units required to meet military packaging and hazard labeling standards to ensure safe handling and compliance with defense logistics protocols. The requirement is issued under the NAICS code 333415, indicating it pertains to commercial and industrial machinery and equipment manufacturing, and is classified as a subcontract within the Department of Defense acquisition structure. Performance of the work is designated for New Cumberland, Pennsylvania, with the zip code 17070-5002, and all deliveries must be coordinated to meet the specified deployment and logistics needs of the DDSP New Cumberland Facility. Responses to this solicitation are due by August 17, 2026, with the posting date listed as August 5, 2026, allowing vendors a brief window to prepare and submit qualified proposals. The contract is managed through the DLA Dibbs platform with the reference number SPE8E826T5016, and although no specific point of contact is provided, all inquiries and submissions must follow the procedures outlined on the official portal. Compliance with military standards for packaging and labeling is non-negotiable, and bidders must demonstrate ability to meet these requirements without deviation to be considered for award.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

COMPRESSOR UNIT, REF

Solicitation # SPE8E9-26-T-3321

The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

COOLING COIL, AIR, DU

Solicitation # SPE8E9-26-T-3360

The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

COOLER, AIR, EVAPORATIVE

Solicitation # SPE8E8-26-T-5031

The contract is for the procurement of nine evaporative air coolers under the NSN 4120-01-499-1010, with a purchase request number of 7017757521 and a delivery timeline of 167 days after order. The solicitation, identified by number SPE8E8-26-T-5031, was posted on August 5, 2026, and responses are due by August 17, 2026. It falls under NAICS code 333415, which pertains to HVAC equipment manufacturing, and is issued by the Department of Defense through the Corpus Christi, Texas facility. The place of performance is designated as Corpus Christi with zip code 78419-5255. The primary point of contact is Alexis Selby, reachable via email at alexis.selby@dla.mil or phone at 312-444-8487. The contract type is a solicitation with no specified set aside designation, and all activity is managed through the Defense Logistics Agency’s DIBBS system.

CORPUS CHRISTI TX GPS USE

POSTED

about 8 hours ago

DEADLINE

COOLING COIL, AIR, DU

Solicitation # SPE8E8-26-T-4993

This contract specifies the procurement of four air duct-type cooling coils, identified by part numbers 1020-01-D and 51-001-121 from Engineered Coil Company, under NSN 4130-01-411-5762, with a total quantity of four units. Deliveries are mandated to be made FOB origin within 167 days, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and materials, and marking must adhere to MIL-STD-129 without special labeling. The use of plastics for wrapping, cushioning, or dunnage is discouraged where contractually permissible. The cooling coils must not contain intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, and portable devices containing mercury must be shockproof with secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline set for July 20, 2027. The contract is issued under solicitation SPE8E8-26-T-4993, classified under NAICS code 333415, with primary point of contact Alexis Selby at DLA.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

ADAPTER, TEMPERATURE

Solicitation # SPE8E9-26-T-3319

This contract is for the procurement of two temperature adapters, identified by NSN 4130012116582 and part numbers 290103BL1 and 8180B from SIEMENS ENERGY, INC. The items are classified as critical application components and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the hardware, except for specific exempted uses such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, while marking follows MIL-STD-129K standards after a waiver of MIL-L-61002 requirements. Plastics are discouraged for wrapping, cushioning, or dunnage wherever contractually feasible. Delivery is FOB origin with a required delivery date of March 6, 2027, and a shipment deadline of February 1, 2027, under a 167-day delivery window. The items are to be delivered to the DLA Distribution San Joaquin warehouse in Tracy, California, and the contract is governed by solicitation SPE8E9-26-T-3319, issued under a federal procurement authority with a NAICS code of 333415. The unit of issue is each, with a total quantity of two units at a fixed price, and the procurement has zero variance tolerance on quantity.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

EVAPORATOR COIL, REFRIG

Solicitation # SPE8E8-26-T-5051

The contract pertains to the procurement of four evaporator coils for refrigeration systems, identified by part number 178K0015-1 and NSN 4130-01-550-6591. The product specification permits minor bending of inlet or outlet tubes as long as there are no weld breaks, tube kinks, or structural damage, with instructions to straighten them if necessary. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA Packaging Requirements, including palletization rules, while adhering to the specified Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The coils must be delivered within 167 days to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and an original delivery deadline of June 29, 2027. Transportation guidelines are outlined in DLAD Proc Notes C19 and C20, and the solicitation issued under contract number SPE8E8-26-T-5051 was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333415. Point of contact for inquiries is Alexis Selby of the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5006

The contract pertains to the procurement of a heating element identified by NSN 4520-01-487-1662 and part number 408638, with a total quantity of 37 units to be delivered FOB origin within 167 days of contract award. The unit price is $37.00 per unit, with no variance allowed in quantity, and inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, using preservation method 10, dry preservation, and unit containers must be labeled according to MIL-STD-129 without special marking. Palletization follows DLA packaging requirements and all items must be shipped to the specified DLA distribution facility in New Cumberland, Pennsylvania. The supply is strictly prohibited from containing mercury or mercury compounds except in specific authorized applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable lamps and instruments requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List, with governing revisions determined by the solicitation or award date depending on acquisition size. Delivery is due no later than February 1, 2027, with the original required delivery date set for November 24, 2026. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE8E8-26-T-5006, issued under NAICS code 333415 by the Department of Defense, with primary point of contact Alexis Selby.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

ELECTRIC DEFROST

Solicitation # SPE8E8-26-T-5023

This contract pertains to the procurement of an electric defrost unit under solicitation SPE8E8-26-T-5023, with a single line item for 12 units identified by NSN 4130-01-523-7731 and part number 78-153. The item is priced at $12.00 per unit, totaling $144.00, with delivery required within 167 days of the contract award, FOB origin, and no tolerance for quantity variance. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and palletized per DLA packaging requirements, with no special marking or cushioning specified. The delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania, and all shipments must adhere to DLA transport procedures C19 and C20. The contract strictly prohibits the intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lighting, sensors, weapon systems, and chemical reagents specifically authorized by NAVSEA. Portable devices containing mercury must include shockproof construction and a secondary containment barrier as dictated by NAVSEA 5100-003D. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333415, and the primary point of contact is Alexis Selby with the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E9-26-T-3332

This contract specifies the procurement of a stationary duct-type heater, model 27EH, with a heating capacity of 45,720.8 BTU, operating at 440 volts AC, 60 hertz, and three-phase power. The unit measures 12.25 inches in height, 29.0 inches in width, and 8.0 inches in depth, and incorporates a nonimmersion electric heating element within a corrosion-resistant steel enclosure. A manual reset switch is included as a special feature. The heater must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and its identification marking must conform to MIL-STD-130N. The product is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The contract mandates full and open competition and requires compliance with First Article Testing under MIL-PRF-22594C, with three units designated for testing. The heater is to be delivered FOB origin with zero variance in quantity, and inspection and acceptance occur at the point of origin. Packaging must align with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129, with no special marking required. The delivery deadline is 317 days from the award, with an original required delivery date of April 22, 2027, and a need ship date of February 1, 2027. Cybersecurity compliance is required at CMMC Level 2 via self-assessment, and covered defense information applies. The NSN for the heater is 4520013266724, and the contract includes a separate line item for the first article test units, priced at one dollar per unit, with no separate charge assumed if unquoted. Delivery is directed to the DLA distribution center in Tracy, California, and transportation logistics follow DLA-specific procedural notes.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE