Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ELECTRIC DEFROST

Active
SPE8E8-26-T-5023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of an electric defrost unit under solicitation SPE8E8-26-T-5023, with a single line item for 12 units identified by NSN 4130-01-523-7731 and part number 78-153. The item is priced at $12.00 per unit, totaling $144.00, with delivery required within 167 days of the contract award, FOB origin, and no tolerance for quantity variance. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and palletized per DLA packaging requirements, with no special marking or cushioning specified. The delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania, and all shipments must adhere to DLA transport procedures C19 and C20. The contract strictly prohibits the intentional introduction of mercury or mercury-containing compounds into the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lighting, sensors, weapon systems, and chemical reagents specifically authorized by NAVSEA. Portable devices containing mercury must include shockproof construction and a secondary containment barrier as dictated by NAVSEA 5100-003D. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333415, and the primary point of contact is Alexis Selby with the Department of Defense.

General Info

Procure 12 electric defrost units at $12 each, deliver to Pennsylvania within 167 days, compliant with DLA and MIL standards, no mercury except authorized uses.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-5023.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRIC DEFROST
ELECTRIC DEFROST
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MGR EQUIPMENT CORP 11718 P/N 78-153 ITEM 7
MGR EQUIPMENT CORP 11718 P/N 78-154 ITEM 19
PEERLESS OF AMERICA 4P366 P/N LS-95E1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757774 0001 EA 12.000
NSN/MATERIAL:4130015237731
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE8E8-26-T-5023
SECTION B
PR: 7017757774 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/14/2026
SPE8E8-26-T-5023 NSN/Part Number: 4130-01-523-7731 Quantity: 12 EA Purchase Request: 7017757774QTY: 12 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLER, AIR, EVAPORATIVE
Solicitation # SPE8E8-26-T-5031
The contract is for the procurement of nine evaporative air coolers under the NSN 4120-01-499-1010, with a purchase request number of 7017757521 and a delivery timeline of 167 days after order. The solicitation, identified by number SPE8E8-26-T-5031, was posted on August 5, 2026, and responses are due by August 17, 2026. It falls under NAICS code 333415, which pertains to HVAC equipment manufacturing, and is issued by the Department of Defense through the Corpus Christi, Texas facility. The place of performance is designated as Corpus Christi with zip code 78419-5255. The primary point of contact is Alexis Selby, reachable via email at alexis.selby@dla.mil or phone at 312-444-8487. The contract type is a solicitation with no specified set aside designation, and all activity is managed through the Defense Logistics Agency’s DIBBS system.
CORPUS CHRISTI TX GPS USE

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E8-26-T-4993
This contract specifies the procurement of four air duct-type cooling coils, identified by part numbers 1020-01-D and 51-001-121 from Engineered Coil Company, under NSN 4130-01-411-5762, with a total quantity of four units. Deliveries are mandated to be made FOB origin within 167 days, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and materials, and marking must adhere to MIL-STD-129 without special labeling. The use of plastics for wrapping, cushioning, or dunnage is discouraged where contractually permissible. The cooling coils must not contain intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, and portable devices containing mercury must be shockproof with secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline set for July 20, 2027. The contract is issued under solicitation SPE8E8-26-T-4993, classified under NAICS code 333415, with primary point of contact Alexis Selby at DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
ADAPTER, TEMPERATURE
Solicitation # SPE8E9-26-T-3319
This contract is for the procurement of two temperature adapters, identified by NSN 4130012116582 and part numbers 290103BL1 and 8180B from SIEMENS ENERGY, INC. The items are classified as critical application components and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the hardware, except for specific exempted uses such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, while marking follows MIL-STD-129K standards after a waiver of MIL-L-61002 requirements. Plastics are discouraged for wrapping, cushioning, or dunnage wherever contractually feasible. Delivery is FOB origin with a required delivery date of March 6, 2027, and a shipment deadline of February 1, 2027, under a 167-day delivery window. The items are to be delivered to the DLA Distribution San Joaquin warehouse in Tracy, California, and the contract is governed by solicitation SPE8E9-26-T-3319, issued under a federal procurement authority with a NAICS code of 333415. The unit of issue is each, with a total quantity of two units at a fixed price, and the procurement has zero variance tolerance on quantity.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
EVAPORATOR COIL, REFRIG
Solicitation # SPE8E8-26-T-5051
The contract pertains to the procurement of four evaporator coils for refrigeration systems, identified by part number 178K0015-1 and NSN 4130-01-550-6591. The product specification permits minor bending of inlet or outlet tubes as long as there are no weld breaks, tube kinks, or structural damage, with instructions to straighten them if necessary. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 labeling and RP001 DLA Packaging Requirements, including palletization rules, while adhering to the specified Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The coils must be delivered within 167 days to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and an original delivery deadline of June 29, 2027. Transportation guidelines are outlined in DLAD Proc Notes C19 and C20, and the solicitation issued under contract number SPE8E8-26-T-5051 was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333415. Point of contact for inquiries is Alexis Selby of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-T-5006
The contract pertains to the procurement of a heating element identified by NSN 4520-01-487-1662 and part number 408638, with a total quantity of 37 units to be delivered FOB origin within 167 days of contract award. The unit price is $37.00 per unit, with no variance allowed in quantity, and inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, using preservation method 10, dry preservation, and unit containers must be labeled according to MIL-STD-129 without special marking. Palletization follows DLA packaging requirements and all items must be shipped to the specified DLA distribution facility in New Cumberland, Pennsylvania. The supply is strictly prohibited from containing mercury or mercury compounds except in specific authorized applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable lamps and instruments requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List, with governing revisions determined by the solicitation or award date depending on acquisition size. Delivery is due no later than February 1, 2027, with the original required delivery date set for November 24, 2026. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE8E8-26-T-5006, issued under NAICS code 333415 by the Department of Defense, with primary point of contact Alexis Selby.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E9-26-T-3332
This contract specifies the procurement of a stationary duct-type heater, model 27EH, with a heating capacity of 45,720.8 BTU, operating at 440 volts AC, 60 hertz, and three-phase power. The unit measures 12.25 inches in height, 29.0 inches in width, and 8.0 inches in depth, and incorporates a nonimmersion electric heating element within a corrosion-resistant steel enclosure. A manual reset switch is included as a special feature. The heater must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and its identification marking must conform to MIL-STD-130N. The product is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The contract mandates full and open competition and requires compliance with First Article Testing under MIL-PRF-22594C, with three units designated for testing. The heater is to be delivered FOB origin with zero variance in quantity, and inspection and acceptance occur at the point of origin. Packaging must align with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129, with no special marking required. The delivery deadline is 317 days from the award, with an original required delivery date of April 22, 2027, and a need ship date of February 1, 2027. Cybersecurity compliance is required at CMMC Level 2 via self-assessment, and covered defense information applies. The NSN for the heater is 4520013266724, and the contract includes a separate line item for the first article test units, priced at one dollar per unit, with no separate charge assumed if unquoted. Delivery is directed to the DLA distribution center in Tracy, California, and transportation logistics follow DLA-specific procedural notes.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
BLOWER, AIR BARRIER
Solicitation # SPE8E7-26-T-3474
The contract pertains to the procurement of a blower air barrier unit with part number 026986000 and NSN 4140-01-286-2729, supplied by ROTRON INCORPORATED, with a total quantity of 36 units at a unit price of $36.00, resulting in a total contract value of $1,296.00. Delivery is required within 123 days from the contract date, with FOB origin terms, and no variance in quantity is permitted—exactly 36 units must be delivered. Inspection and acceptance both occur at the destination, and all packaging must comply with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging and palletization must adhere to RP001 DLA Packaging Requirements for Procurement, and all items must be labeled in accordance with government specifications. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with a required ship date of June 29, 2026, and an original delivery deadline of April 7, 2027. Transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E7-26-T-3474, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333415. All technical and quality specifications referenced via R or I numbers are controlled by the DLA Master List in effect on the award date. The primary point of contact for the contract is Kelly Mitchell, reachable at kelly.mitchell@dla.mil or 445-737-7988.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CONNECTING ROD, PISTON
Solicitation # SPE8E9-26-T-3329
This contract is for the procurement of 30 connecting rods for pistons, identified by NSN 4130-01-477-0311 and part numbers 5H46-202 and 5MH120-434, supplied by CARRIER CORP in Syracuse, NY. The item is designated as a critical application component, requiring strict compliance with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference through R and I numbers. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply provided under this agreement, except for specific functional uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and a strict delivery window of 167 days from the contract date, with an original required delivery date of February 28, 2027. Packaging must conform to MIL-STD-2073-1E, with specified methods for preservation, drying, wrapping, cushioning, and unit containerization, and marking must follow MIL-STD-129 without any special marking codes. The shipment is directed to DLA Distribution’s New Cumberland facility in Pennsylvania, with transportation procedures governed by DLAD Proc Notes C19 and C20. The contract specifies a zero variance in quantity, a unit price of $30.00 per item, and a total value of $900. The solicitation number is SPE8E9-26-T-3329, with a response deadline of August 17, 2026, and was posted on August 5, 2026, under NAICS code 333415, managed by the Department of Defense’s Construction & Equipment MRO SVC I office, with Matthew Kruc identified as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
FILTER, FLUID
Solicitation # SPE8E8-26-T-5003
This contract pertains to the procurement of a fluid filter, identified by NSN 4130-01-468-9904 and part number 9377-4126 Rev A, supplied by Fluid Conditioning Products, Inc. of Lititz, PA. A total of eight units are required at a unit price of $8.00, totaling $64.00, with delivery mandated within 163 days from the contract date under FOB Origin terms. Inspection and acceptance occur at the destination, and all items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using preservation method code 10 per ASTM D3951. No quantity variance is permitted, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application with potential covered defense information, and mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware unless explicitly exempted for functional components such as batteries, instruments, or sensors specified by NAVSEA, in which case secondary containment and shock-proofing are required per NAVSEA 5100-003D. Delivery is directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of February 10, 2027, and an official need ship date of January 28, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
EVAPORATOR COIL, REF
Solicitation # SPE8E8-26-T-4984
The contract pertains to the procurement of an evaporator coil for refrigeration purposes under NSN 4130-01-319-8200, with a requirement for 18 units to be delivered FOB origin within 167 days, targeting a delivery date of February 1, 2027. The item must conform to all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with packaging strictly adhering to MIL-STD-2073-1E and marking compliant with MIL-STD-129, including no special marking codes. Packaging materials must avoid plastics where feasible, and mercury or mercury-containing compounds are prohibited unless explicitly exempted, such as in batteries, fluorescent lights, or approved instruments, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The procurement is issued under solicitation SPE8E8-26-T-4984, with the unit of issue specified as each, pricing at $18.00 per unit, totaling $324.00. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by specific DLA procedural notes. The contract designates the item as critical application, subject to covered defense information requirements. Technical data packages are not available from DLA Troop Support, and submissions to that team are not permitted. Purchasers must adhere to the DLA authorized unit of issue and reference official documentation for ANSI X12 unit conversions.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details