Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

DaqScribe Solutions, LLC 595 Duckhill Road CARSON CITY NV 89702 USA

UEI: SLED_25F76A3A157858EE

DaqScribe Solutions, LLC 595 Duckhill Road CARSON CITY NV 89702 USA is a federal contractor, registered under UEI SLED_25F76A3A157858EE. It has been awarded $195,750 across 1 federal contract. Primary work spans Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing. Top awarding agencies include Naval Air Warfare Center Air Division.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_25F76A3A157858EE

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Naval Air Warfare Center Air Division$195.8K100%

Awards by NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing$195.8K100%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in DaqScribe Solutions, LLC 595 Duckhill Road CARSON CITY NV 89702 USA's top NAICS codes and agencies

SLOT FILLER MODULE

Solicitation # SPE8E9-26-T-3350

The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

DETECTOR, CARBON DIOXID

Solicitation # SPE2DS-26-T-310Q

The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

CONVERTER, ANALOG TO DI

Solicitation # SPE8EN-26-T-2779

This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

CUFF, SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-311C

The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

RETAINER, TUBE, TRACHEAL

Solicitation # SPE2DS-26-T-310Y

The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2808

This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

HARNESS, ORONASAL MASK

Solicitation # SPE2DS-26-T-310N

The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-311H

The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBL

Solicitation # SPE8E9-26-T-3353

This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2778

The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2829

This contract, issued under solicitation SPE8EN-26-T-2829, specifies the procurement of six units of a computer subassembly identified by NSN 7050-01-565-3832, with a delivery requirement of 167 days from the award date and FOB origin terms. The item must be packaged in compliance with ASTM D3951, with all packaging and labeling strictly following MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements, which take precedence over any other standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contractor is required to comply with CMMC Level 2 self-assessment for cybersecurity and must handle Covered Defense Information according to RD002 policies. No technical data package is currently available from DLA Troop Support for this NSN, and requests for such data are not to be submitted. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 1, 2027, and an original required delivery date of May 4, 2027. The unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is controlled by the solicitation issue date.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBL

Solicitation # SPE8E9-26-T-3358

This contract pertains to the procurement of nine computer subassemblies identified by NSN 7050-01-523-3437, with a delivery deadline of 167 days after order. The solicitation number is SPE8E9-26-T-3358, issued on August 5, 2026, with responses due by August 17, 2026, under the NAICS code 334511 for computer and peripheral equipment manufacturing. The contract is administered by the Department of Defense through the Construction & Equipment MRO SVC I office, with performance required at New Cumberland, PA, 17070-5002. All supplies must comply with DLA packaging and technical requirements as enumerated in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies, and covered defense information applies to this procurement. The primary point of contact is Matthew Kruc, reachable via email and phone for inquiries.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-618H

The contract specifies the procurement of five units of a PLATE, END with NSN 6605-00-633-4227 under solicitation SPE4A7-26-T-618H, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with no variance allowed, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is non-hazardous, it must be commercially packaged per ASTM D3951 unless otherwise dictated by DLA requirements; hazardous materials must meet FED-STD-313 and TQ requirement IP025. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The manufacturer must comply with CMMC Level 2 self-assessment and ensure physical identification per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Ozone-depleting substances are prohibited. The delivery address is DLA Distribution Depot Oklahoma at Tinker AFB, and the original required delivery date is August 11, 2027, with a need ship date of January 31, 2027.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2777

The contract pertains to the procurement of 12 units of a computer subassembly identified by NSN 7050-01-525-9049, with a delivery requirement of 75 days after award. The solicitation number is SPE8EN-26-T-2777, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 334511 for computer and peripheral equipment manufacturing. The work is to be performed in Tracy, California, with Jennifer Esworthy of the Defense Logistics Agency serving as the primary point of contact. The contract incorporates DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except under specific exemptions for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-250K

This contract specifies the procurement of a spark gap device identified by part number GP1515 and NSN 6625-01-525-9449, with a quantity of 14 units to be delivered within 70 days of contract award. The item is classified as a critical application item and must comply with stringent DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, container types, and marking standards aligned with MIL-STD-129. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The contractor is prohibited from intentionally introducing mercury or mercury-containing compounds into the product except under clearly defined exceptions such as functional uses in batteries, fluorescent lamps, sensors, or naval-specified reagents, and any portable devices containing mercury must include a secondary containment boundary as mandated by NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with defined verification levels for critical, major, and minor attributes, and zero non-conformances required unless otherwise stated. The item has no shelf life requirement and must adhere to DLA’s cybersecurity certification requirements at CMMC Level 2 through a self-assessment. The contract price is $14.00 per unit, totaling $196, with no variance allowed in quantity. All shipping and transportation details are governed by DLA procedural notes C19 and C20, with the specified parcel post and freight addresses provided for delivery coordination.

MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Electronics Repair and Sustainment Services for RAT-G and GRRU ComponentsThe contract seeks contractors to provide depot-level repair, troubleshooting, and lifecycle sustainment services for Ram Air Turbine Generator (RAT-G) and Generator Regulator Rectifier Unit (GRRU) components integrated into the NGJ-MB pod. These services include comprehensive failure analysis, technical support, and maintenance activities essential to maintaining operational readiness and extending the service life of these critical electronic systems. The work is required to meet stringent military standards and ensure uninterrupted functionality of the NGJ-MB pod in mission-critical environments. The contract is issued under the NAICS code 334511 for Electronic Component and Product Manufacturing and is classified as a subcontract solicited by the Naval Surface Warfare Center, Crane Division, under the Department of Defense. Performance is designated to occur in Torrance, California, with a posting date of August 5, 2026, and a response deadline of August 19, 2026. There is no set-aside designation specified, and no point of contact or additional address details are provided in the solicitation. All proposers must demonstrate proven capability in high-reliability electronics repair and sustainment within defense aviation systems.

POSTED

about 12 hours ago

DEADLINE

SFS Drone Detection System

Solicitation # FA302226Q0012

The 14th Special Forces Squadron is seeking a Drone Detection Shield system to meet a brand-name requirement under DAFMAN 31-101_DAFGM2025-01, paragraph 4.5, aimed at providing persistent detection, identification, classification, and alerting of small unmanned aircraft systems around Columbus Air Force Base, Mississippi. The system must support approximately 260 daily training sorties for the 14th Flying Training Wing, enhance base security, and deliver centralized situational awareness to the Base Defense Operations Center, with a design that allows for future integration of defeat capabilities without replacing the core detection infrastructure. The contract calls for one Lot of the Drone Shield Immediate Response Kit, including all necessary non-personal services, labor, tools, and equipment for installation and implementation as outlined in the Statement of Work, which was amended on July 20, 2026. This solicitation, numbered FA302226Q0012, is a total small business set-aside under NAICS code 334511, managed by the Department of Defense through the 14th Combat Logistics Group. Proposals must be submitted via email to Contract Specialist A1C Holly Walters and Contracting Officer Nina M Jones by 12 P.M. CST on Wednesday, August 5, 2026. The place of performance is Columbus, Mississippi, and inquiries should be directed to the point of contact listed. The opportunity is posted on SAM.gov with the official link provided for reference.

FA3022 14 Cons Lgca

POSTED

about 12 hours ago

DEADLINE

in about 14 hours