Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CHUTE, EJECTION

Active
SPE7LX-26-U-9485Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7LX-26-U-9485 is an Indefinite Delivery Contract issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of ejection chutes, identified by NSN 1005015521226. The requirement is for an estimated quantity of 2 units with a delivery schedule of 570 days after receipt of order. The contract is established as a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000 dollars, though the estimated annual quantity is non-binding. Delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and bar-coding. Special requirements include the prohibition of intentionally added mercury, compliance with CMMC Level 2 self-assessment, and adherence to NIST SP 800-171 for safeguarding covered defense information. Hazardous materials must be labeled according to OSHA 29 CFR 1910.1200 and relevant regulatory acts. All invoicing must be processed through the Wide Area WorkFlow system. Proposals are due by August 25, 2026, via the DIBBS portal, with award decisions likely based on a Lowest Price Technically Acceptable basis.

General Info

Two CHUTE EJECTION units requested, RFQ due August 25, 2026, delivery to DLA depots, indefinite delivery contract potential.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7LX-26-U-9485 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHUTE,EJECTION
CHUTE, EJECTION.
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
BAE SYSTEMS LAND & ARMAMENTS L.P. 064S4 P/N TYUW10010D-ETYU
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239491 0001 EA 2.000
SPE7LX-26-U-9485
SECTION B
PR: 1000239491 PRLI: 0001 CONT’D
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:1005015521226
DELIVERY (IN DAYS):0570
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49 WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:D3 OPI:O INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9485 NSN/Part Number: 1005-01-552-1226 Quantity: 2 EA Purchase Request: 1000239491QTY: 2 Delivery: 570 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE8EE-26-Q-0435
This solicitation is for the procurement of 157 units of a multiple leg sling under solicitation number SPE8EE-26-Q-0435. The contract is a total small business set-aside issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 359 days after the order is placed. The contract includes stringent technical and quality requirements, including adherence to DLA packaging standards, quality conformance inspections, and identification marking per MIL-STD-130N. Compliance with CMMC Level 2 certification and strict export controls under ITAR and EAR is mandatory, requiring contractors to have approved US/Canada Joint Certification Program status. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE7M2-26-T-6219
This contract is for the procurement of 584 units of Class 1, Type ZSS-12 corrosion preventive anodes, specifically noted to be without mounting stud holes in the anode straps. The items must adhere to TDP Rev B Gen 2 and basic specification MIL-DTL-18001L. The contract is designated as a critical application item and requires strict compliance with environmental restrictions, including the prohibition of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA. Delivery is set for 161 days after order, with a required delivery date of February 23, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001.
NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE7M1-26-U-5123
This contract is for the procurement of 80 units of a resilient weapon system mount, identified by NSN 5342013323584 and part number 05-16070-000 from Daimler Truck North America LLC. The solicitation, numbered SPE7M1-26-U-5123, is a total small business set-aside under NAICS code 332994 for the Department of Defense Maritime Supply Chain. Delivery is required within 41 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The items are subject to a non-extendable shelf life of 60 months and must comply with specific packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling will follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Technical data for this item is currently proprietary or insufficient for competitive procurement, and the contract incorporates DLA master list technical and quality requirements.
MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332994
New
Federal
BOAST RFOP_Hand Control Unit, NSN: 1095-01-689-2300, 1095-01-689-2309, 1095-01-689-2324, 1095-01-689-2346
Solicitation # PANDTA-25-P-0000_003284
The Army Contracting Command - Detroit Arsenal is issuing a Full and Open Request for Order Proposal under the Basic Ordering Agreement Sustainment Track program for the supply of Hand Control Units identified by National Stock Numbers 1095-01-689-2309, 1095-01-689-2324, and 1095-01-689-2346, with part number 13100593. The base quantities are 49, 33, and 33 units respectively, with options for 100% of each base quantity, and all deliveries are subject to FOB Destination terms. Proposals must be submitted as a Firm-Fixed-Price order, with evaluation based solely on price, awarded to the lowest-priced eligible vendor. Only active BOAST Basic Ordering Agreement holders who have a fully executed agreement in place by the closing date and time of 8 July 2026 will be considered eligible; proposals from vendors without a current BOA will be rejected without evaluation. The solicitation is conducted electronically through SAM.gov, and offerors are responsible for monitoring for amendments, including Amendment 0001 which extended the closing date and Amendment 0002 which clarified unit totals in the Pricing Sheet. An additional attachment, QA Log 003284, provides a mechanism for addressing contractor questions. This item is subject to export controls under the Export-Controlled Technical Data Package requiring vendors to be certified in the Joint Certification Program to access technical documentation. All performance must comply with the Government’s inspection and acceptance at origin, and the contractor must submit a First Article Test Report prior to production delivery, with production units due within 150 calendar days of FAT approval. The contract incorporates numerous FAR and DFARS clauses covering cybersecurity, safeguarding of covered defense information, NIST SP 800-171 requirements, controlled unclassified information handling per CUI 2024 guidelines, and compliance with Buy American provisions. Packaging must meet Military B standards, with engineering exemptions defined in the Technical Data Package. Vendors are required to ensure active SAM.gov registration, complete mandatory CUI training, and adhere to strict protocols for data transmission, storage, and disposal. No separate technical proposal is required, only a properly completed and signed pricing sheet submitted electronically with the specified subject line. Failure to comply with any mandatory requirement, including timely response to amendments
W6QK Acc- Dta

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
Federal
M24, Right Assembly
Solicitation # W912CH-26-R-0023
The Army Contracting Command – Detroit Arsenal is preparing to issue a full and open competition solicitation for a one-time buy of the M24 Right Assembly, identified by NSN 2840-01-615-5146 and part number 13036424, under NAICS code 332994. This procurement is structured as a firm-fixed-price contract with no options beyond the initial purchase, and the item is subject to export control regulations. All interested vendors must be registered in the System of Award Management and meet the responsibility criteria outlined in FAR 9.104. Access to the Export Controlled Technical Data Packages required for this contract is restricted to vendors certified in the Joint Certification Program; those not yet certified or with expired certification must submit DD Form 2345 to the U.S./Canada Joint Certification Office. The solicitation will be issued electronically, and bidders are solely responsible for monitoring the official government portal for any amendments or updates, as the government will not maintain a bidder mailing list. Failure to obtain and respond to amendments before the deadline will result in nonresponsiveness and rejection of submissions. The response deadline for the anticipated solicitation is June 5, 2026, at 5:00 p.m., with primary point of contact Brandy Sanford and secondary contact Elizabeth Levine Welhouse available for inquiries.
W6QK Acc- Dta

POSTED

about 15 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332994
New
SLED
EOTech EXPS3-0 Single CR123 battery
Solicitation # REQ0122680-OIG
The Texas Juvenile Justice Department has issued solicitation REQ0122680-OIG for the procurement of EOTECH EXPS3 professional-grade holographic weapon sights. These units are characterized by a single transverse-mounted CR123 lithium battery, a signature reticle featuring a 1 MOA center aiming dot with a 65 to 68 MOA outer ring, full night-vision compatibility, and a quick-detach 7mm raised base. The solicitation was posted on August 11, 2026, with a response deadline of August 25, 2026. Performance of the contract will take place within the state of Texas. Interested parties may contact Shande Vaughan for further information regarding this SLED organization requirement.
Texas Juvenile Justice Department

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
Supply of Quick Disconnect Coupling Halves (NSN: 4730011746163)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
Supply of Quick Coupling Half (NSN: 4730005802656)
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
Firing Contact Assemblies Manufacturing
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
Manufacture of High-Pressure Tube-to-Hose Elbows (MIL-DTL-83798/2D)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
Precision Machined Tube Elbow Manufacturing
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
Nonmetallic Hose Assembly Manufacturing & Supply
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 484220
New
DIBBS
Packaging, Labeling, and FOB Destination LogisticsThis subcontract opportunity with the Department of Defense Strategic Acquisition Program Directorate focuses on packaging, labeling, and logistics services. The contractor is responsible for final packaging and labeling according to NSN requirements, as well as shipping to the designated destination under FOB Destination terms, which includes the handling of hazardous material labeling where applicable. The project is designated as a Total Small Business Set-Aside under NAICS code 484220. Interested parties must submit their responses by the deadline of September 11, 2026, following the posting date of August 12, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541611
New
DIBBS
Quality Assurance and Conformance DocumentationThis subcontract opportunity with the Department of Defense Strategic Acq Program Directorate focuses on the preparation and submission of critical quality documentation. The scope of work includes ensuring all Quality Assurance Letters of Instruction, Certificates of Conformance, and calibration records strictly adhere to DLA quality requirements. The project is designated as a Total Small Business Set-Aside under NAICS code 541611. Interested parties must submit their responses by September 11, 2026, following the posting date of August 12, 2026.
Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 423520
New
DIBBS
Raw Material Supply (Metal Stock)The Department of Defense, through the Strategic Acq Program Directorate, is seeking a subcontractor for the supply of specified raw metal stock required for the manufacturing of Return and Transfer Rods. This subcontract requires the provider to ensure full traceability and strict compliance with all technical specifications for the alloy or stainless steel materials. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 423520. The solicitation was posted on August 12, 2026, with a response deadline of September 11, 2026.
Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (CFAT) ServicesThe First Article Testing (CFAT) Services subcontract, issued by the Department of Defense under the Strategic Acq Program Directorate, focuses on the independent testing and documentation of the first production unit. The primary objective is to verify that the unit complies with all design specifications through rigorous material certification, dimensional inspection, and mechanical testing. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on August 12, 2026, with a response deadline set for September 11, 2026.
Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Return and Transfer RodThis subcontract opportunity with the Department of Defense Strategic Acquisition Program Directorate involves the precision machining of a return and transfer rod. The manufacturer must produce the component according to engineering drawing NR 19200 12540416 Rev D, utilizing a comprehensive production process that includes CNC turning, milling, heat treatment, and surface finishing. The procurement is classified under NAICS code 332710 and is designated as a total small business set-aside per FAR 19.5. Interested parties must submit their responses by the deadline of September 11, 2026.
Machine Shops

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
New
DIBBS
ROD, RETURN AND TRAN
Solicitation # SPE7LX-26-R-X069
Solicitation SPE7LX-26-R-X069 is a Total Small Business Set-Aside for a Firm-Fixed Price, Indefinite Delivery Indefinite Quantity Long-Term Contract to procure Return and Transfer Rods (NSN 1005-01-254-9801). Managed by the DLA Weapons Support in Columbus, Ohio, the contract features a five-year duration consisting of a three-year base period and two one-year option periods. The estimated annual quantity is 1,785 units, with a minimum contract value of 1,134.55 dollars and a maximum of 2,276,537.86 dollars. Delivery orders will be issued by DLA Inventory Control Points, and mandatory EDI invoicing via the WAWF system is required for payment. Technical requirements include adherence to multiple reference drawings and specifications, including MIL-DTL-16232H(1), and compliance with ISO 9001:2015 quality standards. Contractor First Article Testing (CFAT) is required for CLIN 0001, with inspection occurring at the source and acceptance at the destination. Packaging must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific labeling for product verification test samples and hazardous materials. Offerors must submit their quotations by September 11, 2026, via DIBBS or email, including the required Pricing, Delivery, Surge and CFAT Spreadsheet and the Capability Assessment Plan.

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336390
New
DIBBS
GUARD, SPLASH, VEHICULAR
Solicitation # SPE7LX-26-R-0080
The government is seeking qualified sources to support a long-term, indefinite-quantity contract for the supply of Guard, Splash, Vehicular, identified by NSN 2540011343714, under solicitation SPE7LX26R0080. This procurement, managed by DLA Land and Maritime out of Columbus, Ohio, is currently in a pre-solicitation and sources-sought phase with a proposed structure of a three-year base period and two optional one-year periods, totaling up to five years. The requirement calls for firm fixed pricing and is intended to support DLA Direct replenishment operations at military depots, with an estimated annual quantity of 1,947 units. The acquisition is unrestricted and open to full and open competition with a HUBZone price evaluation preference applied, and FOB Origin terms governed by the First Destination Transportation program. The solicitation will be issued on August 12, 2026, and will include an online reverse auction process where offerors’ prices will be publicly disclosed under anonymous identifiers during price discussions, with final prices locked upon auction closure unless the contracting officer initiates further discussions under FAR 15.307. Technical data packages, including engineering drawings and manufacturing specifications, are available via TDMT and DIBBS using the solicitation number, with view-only access granted during the solicitation period and download rights reserved exclusively for awardees. Offerors must comply with stringent source approval and alternate offer submission requirements detailed in the Alternate Offer and Source Approval Request Guidance, which mandates comprehensive documentation including actual and similar part drawings, detailed manufacturing plans, master tooling certification, data certification signed by a company officer, subcontractor lists, shipping documents with lot acceptance evidence such as DD Form 250, test plans, inspection method sheets according to MIL-STD-1916, and a comparative analysis demonstrating equivalence. Quality system certification, such as AS9100 or ISO 9001, a quality control manual, and evidence of equipment calibration are required, along with full disclosure of subcontractors involved in forging, casting, heat treating, or other special processes. Proposals must be submitted as a single, non-password-protected PDF file named with the NSN and CAGE code, not exceeding 8MB unless a DoD Safe Link is requested. No physical samples are to be submitted unless explicitly requested in writing. The evaluation will weigh price, delivery performance, past performance,
Other Motor Vehicle Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541219
New
DIBBS
Small Business Subcontracting and Socioeconomic Reporting SupportThe Small Business Subcontracting and Socioeconomic Reporting Support contract is a total small business set-aside under the Department of Defense, specifically managed by the Strategic Acquisition Program Directorate. The primary objective of this subcontract is to assist the prime contractor with essential administrative and regulatory requirements, including small business representations, joint venture disclosures, and mandatory compliance reporting. Technical execution involves managing data and registrations through SAM.gov, UEI, and CAGE codes to ensure adherence to federal standards. The opportunity is categorized under NAICS code 541219, with a response deadline set for August 26, 2026.
Other Accounting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Radioactive Materials Notification (If Applicable)This subcontract opportunity, managed by the Strategic Acq Program Directorate within the Department of Defense, requires contractors to provide written notification to the contracting officer if any cable components contain radioactive materials regulated under 10 CFR. The procurement is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 541620. The solicitation was posted on August 11, 2026, with a response deadline of August 26, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe Hazardous Materials Compliance and Labeling Services subcontract, issued by the Department of Defense under the Strategic Acq Program Directorate, focuses on providing hazard warning labels for unlisted hazardous materials. The primary objective is to ensure all defense shipments maintain strict compliance with OSHA HAZCOM and MIL-STD-129 standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541690. Interested parties must submit their responses by August 26, 2026, following the posting date of August 11, 2026.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and SupplyThe Department of Defense, through the Strategic Acq Program Directorate, is seeking a subcontractor for the manufacture and supply of military-spec cable assemblies. This contract encompasses the entire production lifecycle, including material sourcing, fabrication, labeling, and packaging that adheres to MIL-STD-129 standards. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 335931. Interested parties must submit their responses by August 26, 2026, following the posting date of August 11, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling Services
Engineering Services

POSTED

1 day ago

DEADLINE

in 13 days
View Details