Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on July 15, 2003. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

10--Small Environmental Chamber

Closed
DAAB15-03-T-0005Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The US Army CECOM Acquisition Center is seeking a firm fixed price contract for the purchase of a non-developmental small environmental chamber designed for testing small fuel cells. The selected unit must be currently in production and ready for delivery within six weeks of the contract award. The chamber must be delivered ready for operation, with any necessary installation technical support costs included in the vendor's quotation. Technical requirements include a minimum interior size of 27 cubic feet, a temperature range from -35C to 177C, and a humidity range between 10 and 98 percent RH. The unit must feature an air-cooled refrigeration system, a fog-free viewing window, heavy-duty casters, and a programmable controller with IEEE-488 or RS-232 interface. Proposals must be submitted via email by July 31, 2003, and should not exceed ten pages in length.

General Info

US Army seeks firm fixed price small environmental chamber for fuel cell testing.

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

US Army Communications-Electronics Command, CECOM Acquisition Center Washington ATTN: AMSEL-AC-W, 2461 Eisenhower Avenue Alexa, VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc
ContactsNo contacts available
OfficeALEXANDRIA, VA, 22331-0700, USA
Office AddressALEXANDRIA, VA, 22331-0700, USA
ContactsNo contact information available

Full Description

Show more
NA The US Army CECOM Acquistion Center, intends to purchase a small environmental chamber for the purpose of testing small fuel cells. Candidates responding to this request for quote shall be non-developmental (in production), and shall be ready for delivery in 6 weeks or less from the receipt of contract. Unit shall be delivered ready for operation; if technical support is required during installation that cost shall be included in the quotation. The following technical performance features are required: 1. Interior Size: Min. 27 cu. Ft; 32 cu. Ft. desired 2. Exterior Size: Maximum 70 inches wide x 70 inches deep x 83 inches high [Note: A chamber that can be partially disassembled or assembled on site to meet the 83 inchâ€? door clearance height requirement is acceptable.] 3. Temperature Range: Min. -35C to 177C (-31F to 350F) 4. Temperature Stability/Control Accuracy: 1 degree C at steady state after stabilization 5. Temperature Pulldown: From +24C to -18C in 20 minutes; -35C in 30 minutes. 6. Live Load Capacity: 1000 watts at –30C. Note: 2-5 scfm make up air will be used; to be provided by government. 7. Humidity range: 10 percent RH to 98 percent RH; bounded by maximum dry bulb temperature of 85C and minimum 4C dew point. 8. Humidity control: +/- 5 percent RH as measured at the control sensor. 9. Input Power: 230V single phase or 208V three-phase; 60 amp circuit or less. 10. Air-cooled refrigeration system. 11. Fog-free viewing window in door. 12. 3-4 access ports with plugs for wiring, tubing, etc; at least two of these 2.875 inches minimum diameter. 13. Programmable controller with IEEE-488 or RS-232 computer interface. 14. Heavy-duty casters. Responses should be no longer than ten (10) pages. The resultant contract will be firm fixed price. Responses are to be received via email within 15 calendar days of the date of this notice or NLT 31 July 2003. All requests for further information must be in writing or via email, telephone requests for additional information will not be honored. Technical questions are to be directed to contact@example.gov. You may forward responses to the following e-mail address: Susie Shupe, Procur ement Assistant, e-mail: contact@example.gov or Wanda G. Fair, Contracting Officer, e-mail: contact@example.gov.

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc

Same awarding agency

NAICS: 335999
Federal
Power Distribution and Illumination Systems, Electrical (PDISE)
Solicitation # W909MY27RA001
The Department of the Army, through the Army Contracting Command-Aberdeen Proving Ground, has issued a Sources Sought and Request for Information for the build-to-print manufacture, assembly, and delivery of Power Distribution and Illumination Systems, Electrical (PDISE). These ruggedized, man-portable systems are designed to connect mobile power generation to mission equipment in harsh tactical environments. The potential requirement focuses on four specific configuration items: the M200 and M100 A/P Feeder Systems, the M40 A/P Distribution System, and the M46 Utility Assembly. All production must strictly adhere to Government Technical Data Packages and military standards, including MIL-DTL-53126 for general specifications, MIL-DTL-53072 for Chemical Agent Resistant Coating, and MIL-DTL-22992 for Class L connectors. The government is utilizing this market research phase to identify qualified large and small business sources under NAICS codes 335999 and 335313. Key areas of interest include industry production capacity, lead times for long-lead materials, and the ability to perform First Article Testing (FAT) within 360 days after contract award. Interested vendors must provide a detailed response by November 6, 2026, including corporate experience, technical capabilities, quality certifications such as ISO 9001:2015 or AS9100D, and Rough Order of Magnitude pricing for quantity ranges between 1 and 200 units. This information will be used to determine the final acquisition strategy and the feasibility of a small business set-aside.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

10 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS