Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

145927 TRAILER, LACTATION, ADA COMPLIANT, GROUND LEVEL ENTRY

Active

230281State & Local

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Los Angeles Department of Water and Power is soliciting bids for a 145927 Trailer, Lactation, ADA Compliant, Ground Level Entry under solicitation number 230281, with the bid opportunity posted on May 27, 2026, and a response deadline of June 12, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the Electronic Request Solicit Procure (eRSP) system; hard copy or mail-in bids will not be accepted. The equipment falls under NAICS code 333415 and is intended for performance in Los Angeles, California. The contract is managed by the Water & Power agency under the state of California, with Ness P. Cua designated as the point of contact for inquiries, reachable via email at ness.cua@ladwp.com. Bidders must strictly adhere to all requirements outlined in the official bid document and ensure compliance with ADA standards for the trailer’s design and functionality.

General Info

LADWP seeks ADA-compliant ground-level lactation trailer bids via electronic submission by June 12, 2026.

Agency

California → Water & PowerView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

Los Angeles, CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJul 8

Solicitation

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Water & Power

Contacts1 person available

OfficeN/A

Organization / Agency

California → Water & Power

View Agency Profile

Office AddressN/A

Contacts

CUA NESS PPoint of Contact

contact@example.gov

Full Description

Show more

THIS RAMP ID REFERS TO A LOS ANGELES DEPARTMENT OF WATER AND POWER (LADWP) BID OPPORTUNITY. ALL SUBMITTAL REQUIREMENTS ARE NOTED ON THE BID DOCUMENT. BIDS ARE TO BE SUBMITTED ELECTRONICALLY THROUGH THE ELECTRONIC REQUEST SOLICIT PROCURE (eRSP) SYSTEM WHICH CAN BE ACCESSED AT THE LINK SHOWN BELOW. MAIL-IN/HARD COPY BID SUBMITTALS WILL NOT BE ACCEPTED.

Similar Contracts

Same NAICS industry code

Chilled & Hot Water Piping Interconnection Works in American Embassy, New Delhi

Solicitation # 191N6526Q0095-A001

This contract amendment pertains to chilled and hot water piping interconnection works at the American Embassy in New Delhi, with the solicitation number 191N6526Q0095-A001, posted on August 10, 2026, and requiring proposals to be submitted by August 14, 2026, at 8:30 AM. The offeror must formally accept the amendment by completing Blocks 8, 15A, 15B, and 15C and including the signed SF-30 document in their final proposal submission, referencing Annexure A for detailed scope requirements. The work is classified under NAICS code 333415 and is conducted by the U.S. Embassy in New Delhi, under the Department of State, with no set-aside provisions applied. The contracting office is based in Washington, D.C., but the performance location is firmly established at the embassy compound in New Delhi, India, with a postal code of 110021. Primary point of contact for inquiries is Chaitanya Sharma, Procurement Supervisor, reachable at sharmac@state.gov, with Rajender available as a secondary contact.

US Embassy New Delhi

POSTED

about 8 hours ago

DEADLINE

Commercial Ice Machine

Solicitation # W911S226U3996

The U.S. Department of Defense through the W6QM Micc-Ft Drum office is soliciting commercial block and cube ice machines under contract number W911S226U3996, with a solicitation posted on August 10, 2026, and responses due by August 17, 2026, at 2:00 PM Eastern Time. This is a combined solicitation and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, with the NAICS code 333415 categorizing the procurement as ice machine manufacturing. The contract will be performed at a location with a zip code of 65473, though the specific city and state are not listed, and the award will be managed by the Fort Drum, New York office with a mailing address in 13602-5220. Direct inquiries and communications should be directed to Leon Funches, the primary point of contact, who can be reached via email at leon.p.funches.civ@army.mil or by phone at 573-563-5113. Interested vendors must submit proposals through the SAM.gov portal linked in the announcement.

W6QM Micc-Ft Drum

POSTED

about 8 hours ago

DEADLINE

Commercial Air Conditioner SupplyThe contract solicits the supply of six commercial-grade air conditioning units that must meet both military and commercial standards for performance, packaging, and labeling, ensuring suitability for defense use while maintaining commercial viability. The units are required to adhere to strict technical specifications outlined by the Department of Defense through the Defense Logistics Agency, with performance criteria designed to operate reliably under demanding environmental conditions. Delivery and compliance are tied to the place of performance listed as FPO with zip code 96322-0001, indicating the equipment will be deployed to a military installation or vessel, likely overseas or in a remote operational area. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, allowing for a short but standard turnaround for qualified vendors to submit bids. This is classified as a subcontract, suggesting the award may be part of a broader system integration or logistics initiative led by the Department of Defense. The NAICS code 333415 confirms the procurement relates to commercial and industrial heating and air conditioning equipment manufacturing, underlining the technical nature of the requirement. Participation is expected from suppliers familiar with military-grade durability requirements, even though the units are commercially rated, with packaging and labeling protocols designed for secure transport and quick field deployment.

Defense Logistics Agency

POSTED

DEADLINE

Electrical Heating Element ManufacturingThe contract requires the manufacture of 100 nonimmersion-type electrical heating elements that must meet both military and commercial specifications, including adherence to the National Stock Number system and all referenced technical standards. The work is classified as a subcontract under NAICS code 333415, targeting the production of specialized heating components for use in defense and industrial applications. All units must satisfy rigorous quality and performance criteria aligned with Department of Defense requirements. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with ZIP code 17070-5002. The contracting activity is managed by the DDSP New Cumberland Facility under the Department of Defense, and the opportunity is accessible via the DIBBS platform. While no set-aside designation is specified, compliance with all technical and regulatory benchmarks is mandatory for award consideration.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Defense Logistics Agency

POSTED

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5117

The contract is for 100 electrical heating elements of the nonimmersion type, identified by NSN 4520-00-881-8810, under solicitation number SPE8E8-26-T-5117. The items are to be delivered within 122 days of award, and the procurement is managed by the Defense Logistics Agency through the DDSP New Cumberland facility. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and it falls under NAICS code 333415 for heating equipment manufacturing. The primary point of contact is Alexis Selby, reachable via email and phone provided. The technical data associated with this heating element is subject to strict export controls under either ITAR or EAR, meaning any disclosure—even to foreign nationals within the United States—requires prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with valid US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and approved access through the DLA questionnaire may receive the technical information. Delivery and performance are centered at New Cumberland, Pennsylvania, with no other location specified.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Pass-Through Refrigerator Supply and InstallationThe contract is for the supply and installation of a pass-through refrigerator designed for cold food transfer, with all necessary electrical and structural support included to ensure proper operation and integration into existing facilities. The provider will be responsible for delivering, installing, and commissioning the unit in compliance with technical and safety standards, along with providing comprehensive training to staff on operation, maintenance, and troubleshooting procedures. A warranty covering parts and labor will accompany the equipment to guarantee performance and reliability over the agreed term. The solicitation was posted on August 7, 2026, with a response deadline of September 9, 2026, at 3:00 PM, and it is classified as a subcontract under NAICS code 333415 for commercial refrigeration equipment manufacturing. The contracting entity is the Bulloch Board of Education in Georgia, though specific location details such as city, state, or zip code are not provided, and the place of performance remains unspecified in the available data.

Bulloch Board of Education

POSTED

DEADLINE

Air Circulator Ventilator SupplyThe contract pertains to the supply of 194 air circulation ventilators that must fully comply with specified technical requirements, including packaging standards, and will be delivered FOB Origin with inspection conducted at the destination. The equipment is intended for use under the auspices of the Defense Logistics Agency within the Department of Defense, and the North American Industry Classification System code 333415 indicates the product category as ventilation and air conditioning equipment manufacturing. Delivery is structured to place responsibility on the supplier up to the point of origin, with the recipient conducting final inspection upon arrival to ensure conformance. The contract was posted on August 7, 2026, and is classified as a subcontract, though no set-aside type or specific procurement details beyond the technical and logistical parameters are provided. The performance location and point of contact information are not specified in the available data.

Defense Logistics Agency

POSTED

DEADLINE

Supplier – HVAC Unit and Major ComponentsThe contract seeks the supply of a new commercial HVAC unit and its major components, requiring full compliance with Buy American Act standards and applicable energy efficiency regulations. This subcontract is designated as a Small Business Set Aside under the SBA, specifically reserved entirely for small businesses, with the NAICS code 333415 indicating classification under HVAC equipment manufacturing. The opportunity was posted on August 7, 2026, with responses due by September 9, 2026, and the place of performance is designated as Albany with a zip code of 94710. The contracting agency is the USDA Agricultural Research Service, specifically the AFM APD division under the Department of Agriculture. All supplied equipment must meet stringent domestic content and performance benchmarks to fulfill federal procurement requirements, and bidders are expected to demonstrate compliance with both sourcing and efficiency criteria to be considered for award.

USDA Ars Afm Apd

POSTED

DEADLINE

in about 1 month

Commercial Air Conditioner Supply and DeliveryThe contract encompasses the procurement and delivery of twenty-five commercial-grade air conditioning units, with all units required to be properly packaged and labeled in accordance with specified standards. Shipping is to be conducted F.o.b. Destination to Bremerton, Washington, with the vendor responsible for all costs and risks until the units arrive at the designated delivery location. The solicitation is structured as a subcontract under the Small Business Set Aside program, exclusively available to qualified small businesses, and is classified under NAICS code 333415, which pertains to air conditioning and warm air heating equipment manufacturing. The opportunity was posted on August 7, 2026, with responses due by 9:00 p.m. Pacific Time on August 10, 2026. The contracting activity is managed by DLA Maritime - Puget Sound, under the U.S. Department of Defense, and all performance obligations must be fulfilled at the place of performance in Bremerton, WA, with a ZIP code of 98314. The vendor must ensure compliance with all delivery, labeling, and packaging requirements outlined in the solicitation and meet all small business eligibility criteria to be considered for award.

DLA Maritime - Puget Sound

POSTED

DEADLINE

in about 1 hour

41--HLDG FR SUB ASSY

Solicitation # N0010426RBW67

This contract is a firm-fixed-price solicitation issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS-MECH) under solicitation number N0010426RBW67 for the procurement of a holding frame assembly, identified by the nomenclature "HLDG FRAME ASSY" in place of "HLDG FR SUB ASSY." The solicitation is set aside for small businesses and requires strict compliance with technical, quality, and packaging specifications outlined in the Individual Repair Part Ordering Data (IRPOD), drawings, technical data, and referenced military specifications accessible through the BPMI e-Commerce website, which requires pre-registration. Contractors must adhere to an established order of precedence for resolving document conflicts, with contract amendments taking priority over schedules, terms, and referenced standards. The IRPOD governs quality assurance requirements, and contractors are obligated to maintain inspection records available for government review throughout the contract term. Packaging must comply with MIL-PRF-23199 and related cleanliness standards, and the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions. Mercury or mercury-containing compounds are strictly prohibited from contact with the supplied hardware. Pricing is valid for 60 days following the closing date of August 7, 2026, and all contractual documents are deemed issued upon electronic transmission or mail delivery. The contractor must submit a Certificate of Compliance per DI-MISC-81356 at the time of material delivery, with separate certificates for each contract line item combination. Technical data packages are required and must be submitted in accordance with the DD Form 1423 structure, including specified delivery frequencies, distribution statements, and approval codes. Any deviations from contractual requirements must be pre-approved by the contracting officer with full technical justification, including evidence that the proposed change does not affect form, fit, function, or quality. The contract mandates compliance with cybersecurity maturity model certification levels, equal opportunity provisions for veterans and workers with disabilities, and prohibition of unapproved subcontracting. The point of contact for inquiries is listed as Collin A. Browning, with all responses required to be submitted via the SAM.gov portal by the deadline.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Ultra-Low Temperature Freezer – Marion VAMC

Solicitation # 36C25526MC0008

The Department of Veterans Affairs, through its VISN 15 Network Contracting Office 15, is conducting market research to identify qualified vendors capable of supplying an Ultra-Low Temperature Freezer for the Marion VA Medical Center in Marion, Illinois. This notice is purely informational and not a solicitation, meaning no binding obligation is created by responses, nor is a contract guaranteed. Interested companies must submit detailed information including their point of contact, SAM.gov UEI number, small business or socioeconomic status, the country of origin of the equipment, and proof of authorization as a distributor of the manufacturer’s product, along with marketing literature demonstrating compliance with the salient technical requirements outlined in the Statement of Work. All submissions must be sent by the deadline to the designated email address, and the government will not reimburse any costs associated with responding. The response feedback will inform future acquisition decisions, including potential set-aside requirements such as a Service-Disabled Veteran Owned Small Business set-aside, though a FULL and OPEN competition remains an option if responses are insufficient. The NAICS code for this requirement is 333415, and the office handling the procurement is located in Leavenworth, Kansas.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

More opportunities from California → Water & Power

Same awarding agency

146063 Haynes Generating Station - 7FA Gas Turbine Case Tooling

Solicitation # 231369

The contract pertains to the procurement of 7FA Gas Turbine Case Tooling for the Haynes Generating Station under a bid opportunity issued by the Los Angeles Department of Water and Power. The solicitation, numbered 231369, was posted on August 10, 2026, with a strict submission deadline of August 20, 2026, at 9:00 PM Pacific Time. All bids must be submitted electronically through the Electronic Request Solicit Procure (eRSP) system; hard copy or mail-in submissions will not be accepted. The applicable NAICS code is 423830, indicating the nature of the procurement involves wholesale trade in machinery and equipment. The contract is classified under a SLED agency structure with the Los Angeles Department of Water and Power as the executing entity, and the work is to be performed in Los Angeles, California. Point of contact for inquiries is Jaimesha Ferrell, reachable via email at jaimesha.ferrell@ladwp.com. The official bid details and submission portal can be accessed through the provided RAMP LA link.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

146564 CONNECTOR, CONDUIT

Solicitation # 231366

The Los Angeles Department of Water and Power is soliciting bids for a 146564 Connector, Conduit under solicitation number 231366, with the opportunity posted on August 10, 2026, and a strict response deadline of August 17, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the electronic Request Solicit Procure (eRSP) system; hard copy or mail-in bids will not be accepted. The procurement falls under NAICS code 335932 and is classified as a SLED opportunity managed by the California Water & Power agency, with performance taking place in Los Angeles, California. Armando Aparicio is the designated point of contact for inquiries and can be reached at armando.aparicio@ladwp.com. Bidders are required to review the full bid document for all submission requirements and compliance details before submitting through the official portal linked in the solicitation.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

90918 Program Management Consulting Services for Water Programs

Solicitation # 231085

The Los Angeles Department of Water and Power is soliciting proposals for Program Management Consulting Services for Water Programs under solicitation number 231085, with a posted date of August 10, 2026 and a mandatory electronic submission deadline of September 3, 2026 at 9:00 PM Pacific Time. Bids must be submitted exclusively through the Electronic Request Solicit Procure system, and no mail-in or hard copy submissions will be accepted. The work is categorized under NAICS code 541330 and will be performed in Los Angeles, California, serving the Water & Power agency within the state of California. Point of contact for all inquiries is Douglas Vernon-Scott, reachable via email at douglas.vernon-scott@ladwp.com, and full details and submission guidelines are accessible through the provided UI link.

Engineering Services

POSTED

about 12 hours ago

DEADLINE

145916 Van Nuys E-hub DC Fast Chargers

Solicitation # 231370

The Los Angeles Department of Water and Power is soliciting bids for the installation of DC fast chargers at the Van Nuys E-hub under solicitation number 231370, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the Electronic Request Solicit Procure system, and hard copy or mail-in bids will not be accepted. The work is located in Los Angeles, California, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The project is managed by the Water & Power agency within the state of California, and inquiries should be directed to Jaimesha Ferrell, the designated point of contact, via email at jaimesha.ferrell@ladwp.com. The opportunity is open to eligible contractors through the RAMP LA platform, where full details and submission guidelines are available through the provided link.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

146367 DISCONNECTABLE, COLD SHRINK, JOINT BUS

Solicitation # 231371

The contract pertains to solicitation number 231371 for the procurement of 146367 DISCONNECTABLE, COLD SHRINK, JOINT BUS equipment by the Los Angeles Department of Water and Power. All bids must be submitted electronically through the Electronic Request Solicit Procure (eRSP) system, with no mail-in or hard copy submissions permitted. The solicitation was posted on August 10, 2026, and bids are due by August 21, 2026, at 9:00 PM Pacific Time. The associated NAICS code is 335932, identifying the category as other electrical equipment and component manufacturing. Performance of the contract will occur in Los Angeles, California. The sole point of contact for inquiries is Eric P. Lau, reachable via email at eric.lau@ladwp.com. Further details and submission guidelines can be accessed through the provided uiLink.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

90815R1 Scattergood GS. Units 1&2 Green Hydrogen-Ready Modernization

Solicitation # 230812

The Los Angeles Department of Water and Power is soliciting bids for the 90815R1 Scattergood GS Units 1&2 Green Hydrogen-Ready Modernization project under solicitation number 230812. This opportunity, posted on July 2, 2026, requires all proposals to be submitted electronically via the Electronic Request Solicit Procure (eRSP) system; mail-in or hard copy submissions will not be accepted. The response deadline is set for September 30, 2026, at 9:00 PM Pacific Time. The project falls under NAICS code 221122 and involves modernizing existing generating units to be compatible with green hydrogen technology, aligning with future decarbonization goals. Performance of the work will occur at the Scattergood Generating Station in Los Angeles, California. All submittal requirements are detailed in the official bid documents and must be strictly followed. Technical inquiries and correspondence should be directed to Juanico, R Albert G, the designated Point of Contact, via email at ralbertg.juanico@ladwp.com. The opportunity is open to eligible entities without a specific set-aside designation and is issued under the California state and local government category.

Electric Power Distribution

POSTED

about 1 month ago

DEADLINE

in about 2 months

90909 Long-term Traffic Control Engineering Services

Solicitation # 230808

The Los Angeles Department of Water and Power is seeking qualified providers for long-term traffic control engineering services under solicitation number 230808, with a posted date of July 2, 2026, and a mandatory electronic submission deadline of August 20, 2026, at 9:00 PM Pacific Time. All proposals must be submitted through the Electronic Request Solicit Procure system; hard copy or mail-in bids will not be accepted. The work is scoped to support traffic control engineering needs within Los Angeles, California, and is classified under NAICS code 541330 for engineering services. This opportunity is not set aside for any specific demographic or small business category. Interested parties should direct all inquiries to Michael Rodriguez, the designated point of contact, via email at michael.rodriguez@ladwp.com. Further details and the full solicitation document are accessible through the provided URL.

Engineering Services

POSTED

about 1 month ago

DEADLINE

Small Business (MBE/WBE/OBE) Participation in SPP BidsCertified Minority-owned, Women-owned, and Other businesses are invited to engage directly in bidding opportunities under the Small Business Participation in SPP Bids program administered by Water & Power in California. This subcontract opportunity, posted on June 27, 2026, remains open for responses until June 30, 2031, allowing eligible businesses to compete for contracts in the specialty trade contracting sector classified under NAICS code 238210. Participation is focused on the Los Angeles area, with no geographic restrictions beyond the place of performance specified. The program is designed to promote inclusion and equitable access to procurement opportunities for certified small businesses, enabling them to serve as direct suppliers or service providers within SPP-related projects. While no specific set-aside designation is listed, the structure prioritizes MBE, WBE, and OBE firms to ensure diverse representation in state-supported contracting.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 month ago

DEADLINE

in almost 5 years

Supply of Environmentally Preferable Products (EPP)The contract outlines the supply of products that comply with the Los Angeles Department of Water and Power’s Environmentally Preferable Purchasing criteria, ensuring that all items delivered have lower environmental and health impacts than conventional alternatives. This subcontract, classified under NAICS code 322220, is open for responses until June 30, 2031, and requires vendors to meet stringent sustainability standards aligned with LADWP’s environmental goals. Performance of the contract is designated for the city of Los Angeles, and all supplied goods must be verified to reduce toxic emissions, conservation of resources, and overall ecological footprint. The solicitation does not specify a set-aside designation or detailed point of contact, indicating a broad, open competition without demographic or size-based preferences. The contract’s structure emphasizes long-term compliance over a five-year window, allowing for consistent, ongoing delivery of approved products. While no formal office address is provided, the operational focus remains centralized in Los Angeles, with vendors expected to ensure timely delivery and adherence to evolving environmental benchmarks set by the Water & Power agency in California.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 1 month ago

DEADLINE

in almost 5 years

Provision of Standardized Services (e.g., Testing, Calibration, Maintenance)This contract authorizes the provision of standardized discrete service events including equipment calibration, laboratory testing, and preventive maintenance for assets owned by the Los Angeles Department of Water and Power. Services are to be delivered under one-time purchase orders issued as needed, allowing for flexible and on-demand support without long-term commitments. The work is scoped to ensure consistent, standardized execution across all service events and is expected to occur primarily within Los Angeles. The contract falls under NAICS code 541380, classifying it as a professional, scientific, and technical service, and is structured as a subcontract. The opportunity is open for responses until June 30, 2031, with the solicitation posted on June 27, 2026, providing a multi-year window for eligible parties to engage. The agency responsible is the Water & Power department of California, with no set-aside provisions identified.

Testing Laboratories and Services

POSTED

about 1 month ago

DEADLINE

in almost 5 years

Supply of Specific Manufacturer-Branded Equipment & PartsThe contract authorizes the supply of off-the-shelf or custom-manufactured equipment, parts, or components as detailed in individual bid requests under the Supply of Specific Manufacturer-Branded Equipment & Parts agreement. All submissions must strictly adhere to the specified manufacturer, brand, and exact part number with no substitutions allowed, ensuring consistency and compatibility with existing systems. The opportunity is open for bidding through June 30, 2031, and is classified as a subcontract under NAICS code 423610, indicating wholesale trade of electronic and other machinery and equipment. Performance is expected to be delivered to Los Angeles, with no set-aside provisions or specified organization type, and the contracting entity is the Water & Power agency under the State of California. Bidders must comply precisely with each solicitation's technical requirements, as deviations will result in disqualification.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

in almost 5 years

RFQ LADWP SIMPLIFIED PURCHASING PROGRAM (SPP)

Solicitation # 230750

The Los Angeles Department of Water and Power is issuing a Request for Quotation under its Simplified Purchasing Program for one-time spot purchases up to $25,000, open only to vendors who have completed and been certified under the SPP program. Participation is restricted to certified vendors, and interested parties must submit a completed vendor application through the designated Smartsheet link to be eligible for bid opportunities. The solicitation, identified by number 230750 and posted on June 27, 2026, remains active until June 30, 2031, allowing for ongoing submissions during this period. The procurement aligns with NAICS code 321113 and is targeted toward suppliers capable of meeting the needs of the Water & Power agency in Los Angeles, California. All applicants must review the attached SPP packet containing program guidelines, eligibility standards, and application instructions. Questions or correspondence should be directed to the LADWP Vendor Liaison Center at spp@ladwp.com.

POSTED

about 1 month ago

DEADLINE

in almost 5 years