Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

17--MODULE ASSEMBLY,JET

Awarded

SPE7M226Q0258Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award pertains to the procurement of 17 Module Assembly, Jet units under solicitation number SPE7M226Q0258, issued by the Defense Logistics Agency Land and Maritime, a division of the Department of Defense. The NAICS code 336611 indicates this is related to aerospace product and parts manufacturing, specifically for jet module components. The award notice was posted on May 18, 2026, and the performing office is located in Columbus, Ohio, with the primary point of contact being Kyle Barr, reachable via email at Kyle.Barr@dla.mil or by phone at 614-692-1243. No specific place of performance details are provided, and there is no identified set-aside designation for small businesses or other categories. The contract is managed through the SAM.gov system, with additional information accessible via the provided UI link.

General Info

Procurement of 17 Module Assembly, Jet by DLA Land and Maritime under solicitation SPE7M226Q0258, open to all contractors.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

Contract Value

$989,328.47

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

OH

Set-Aside

NONE

Awardee

THE ENTWISTLE COMPANY LLCView Profile

Award Issued Date

05/18/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 18

Award Notice

AwardedMay 18

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Kyle Barr

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=896ba223bdbd417bb98c0ebeb7a530e1

Similar Contracts

Same NAICS industry code

Hull, Structural & Tank Preservation

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

Outboard Motor and Control Systems

Ofc Of Acqusition Grants-National

POSTED

about 14 hours ago

DEADLINE

USS San Diego (LPD-22), Refrigerant Suction Pipe for No.4 A/C Plant; remove and install

Solicitation # N6264926Q0577

Solicitation N6264926Q0577, issued by Navsup Flt Logistics Ctr Yokosuka, is a firm fixed price request for the removal and installation of an 8-inch IPS refrigerant suction pipe for the No.4 A/C Plant aboard the USS San Diego (LPD-22). The scope of work involves removing a pipe with a pinhole leak, picking up a repaired replacement from the SRF Production Shop S56, installing it in Auxiliary Machinery Room No.2, and conducting an operating pressure test. Performance is scheduled to take place at Sasebo Naval Base from November 23, 2026, to January 31, 2027. To be eligible for this single award, offerors must possess an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) in the Japan Region and demonstrate authorization to operate in Japan per DFARS 252.225-7042. Award will be based on the lowest total price among responsive offerors, as technical acceptability is pre-qualified through the MSRA/ABR status. Quotations, including an SF 18 and a detailed price breakdown, are due by October 15, 2026. The contract requires compliance with higher-level quality standards under FAR 52.246-11 and utilizes the Wide Area WorkFlow system for invoicing.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

in about 1 month

MRPO - Modular Barge

Solicitation # W912EK26QA058

The US Army Corps of Engineers, specifically the Rock Island District, is soliciting bids under solicitation W912EK26QA058 for the procurement of new Flexifloat modular barge sections and associated equipment. This firm-fixed-price commercial supply contract aims to establish a stable marine work platform to support Mississippi Valley Division missions. The required equipment includes brand name or equal modular barge sections, connection hardware, deck cleats, lock assemblies, and rub rail brackets, with additional optional spud-related items. The procurement is designated as a total small business set-aside under NAICS code 336611. The solicitation was posted on September 8, 2026, with a response deadline of September 21, 2026. Performance of the contract will take place in Pleasant Valley, Iowa. The government has provided justification for the brand-name requirement based on engineering compatibility, safety considerations, and the need to avoid substantial duplication of costs. Interested parties must adhere to the technical specifications and submission instructions provided by the primary point of contact, Kate Behrens, and secondary contact, Jeffrey Voss.

W07V Endist Rock Island

POSTED

about 14 hours ago

DEADLINE

USS BLUE RIDGE (LCC-19) TGI 3819P24302-A01, Yokosuka Japan

Solicitation # N6264926RA037

NAVSUP Fleet Logistics Center Yokosuka is soliciting firm-fixed-price repair and alteration services for the USS BLUE RIDGE (LCC-19) under a Master Agreement for Repair and Alteration of Vessels (MARAV). The scope of work, detailed in Task Group Instruction TGI 3819P24302-A01, includes specific maintenance items such as the installation of a new propeller sleeve and stern tube shaft, with provisions allowing for the off-site transport of the propulsion shaft for depot overhaul. The period of performance is scheduled from February 23, 2027, through June 8, 2027, with work performed aboard the vessel at the contractor's facility at Commander, Fleet Activities Yokosuka Naval Base. To be eligible for award, offerors must be authorized to operate and do business in Japan and must hold an active U.S. Navy Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) as a prime contractor. Proposals are due by October 5, 2026, at 10:00 AM JST and must be submitted electronically. Award will be granted to the responsible, technically acceptable offeror providing the lowest evaluated price, with price playing a dominant role in the selection process. The contract incorporates strict quality management standards per NAVSEA Standard Item 009-04 and requires the use of the Wide Area WorkFlow system for invoicing and payment.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

COLUMBIA Class Tailcone Manufacture

Solicitation # N0016726R1005

The Advanced Propulsor Management Office at the Naval Surface Warfare Center, Carderock Division is issuing a pre-solicitation notice for the Columbia Class Tailcone Follow-on contract, soliciting feedback on draft Statement of Work and solicitation sections L and M to inform the upcoming RFP release scheduled for late September 2026. This notice is not an invitation to bid and no compensation will be provided for response preparation; responses must be submitted by June 2, 2026, and are limited to ten pages, focusing on demonstrating technical capability and identifying any barriers to proposal submission. The intended award date is June 2027, with a contract structure combining a base year and four one-year options, potentially extending performance over five years. The core deliverable is the manufacturing of the Columbia Class submarine tailcone, requiring advanced capabilities in machining, composite and syntactic foam fabrication, dynamic balancing, and secure inter-facility transport, aligned with stringent quality standards including ISO 9001:2008 or AS9100. The resulting contract will be a mixed-type award with Fixed-Price-Incentive-Fee (FPIF) clauses for tailcone kits and Cost-Plus-Fixed-Fee (CPFF) terms for engineering services and non-recurring engineering, evaluated through a trade-off process prioritizing technical merit over cost. Proposals must be submitted in four distinct volumes via the PIEE portal, with strict formatting and naming conventions, and compliance with mandatory certifications including Unique Entity ID, CAGE code, Small Business Participation Commitment goals (SDB, HUBZone, WOSB, VOSB, SDVOSB), and affirmative statements regarding no organizational conflict of interest. Security requirements are paramount, mandating compliance with DD Form 254, DoD 5220.22-M for classified data, and DFARS 254.204-7012 for unclassified controlled information, with facility clearance either already held or a detailed path to acquisition required. Data deliverables will be tracked through multiple CDRLs covering production schedules, monthly progress, conference minutes, travel reports, and cost status, while packaging and marking adhere to NAVSEA Form 9245/1 and specific PERs. All submissions are final and no government responses or notifications will be provided regarding pre-solicitation feedback.

POSTED

about 14 hours ago

DEADLINE

Aviation Availability: USCGC RELIANCE FY27 AA

Solicitation # 70Z08026QMECP0032

Sflc Procurement Branch 1(00080)

POSTED

about 14 hours ago

DEADLINE

USS MIGUEL KEITH (ESB-5) ROH FY27

Solicitation # N6264926

The NAVSUP Fleet Logistics Center Yokosuka Site Singapore is issuing a presolicitation notice for a competitive Regular Overhaul (ROH) and Underwater Inspection in Lieu of Drydocking (UWILD) for the USS MIGUEL KEITH (ESB-5). Tentatively scheduled for the end of 2027, the ship repair availability will be performed by a contractor shipyard located within the Seventh Fleet Area of Responsibility. The comprehensive scope of work includes hull and structural preservation, propulsion and auxiliary machinery maintenance, electrical and HVAC services, communication and navigation system updates, and safety equipment certifications. Specific technical requirements include ABS intermediate surveys, high voltage electrical safety standards, and the delivery of gas free certificates and weight and moment reports. To be eligible for award, interested ship repair firms must maintain an active registration in the System for Awards Management (SAM.gov) and be authorized to operate in the country of performance. The government is requesting capability statements from interested firms, which must be submitted on company letterhead and include a description of the firm's capabilities, relevant experience with U.S. Navy ships, contract history, and staffing levels. These submissions, limited to five pages, must be emailed to the designated Contract Specialist by September 26, 2026. This notice is for informational purposes only and does not constitute a solicitation or a binding commitment by the U.S. Government to award a contract.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

3553 CEMDC CELRE Procurement of Stoplog Barges - W912BU26BA034

Solicitation # W912BU26BA034

Solicitation W912BU26BA034 is an Invitation for Bid for the design, fabrication, testing, and delivery of two new welded steel stop log barges, with an option for a third. These vessels are intended for the Poe and MacArthur Locks on the Great Lakes to support the Detroit District's St. Mary's River Project. Hull 916 will be configured for Poe Lock stop logs, and Hull 925 will be configured for MacArthur Lock stop logs. The project is a total small business set-aside under NAICS code 336611, utilizing a firm fixed-price contract structure. The contractor must deliver the vessels afloat and ready for service to Sault Saint Marie, Michigan, within 625 calendar days of the award. The procurement requires bid, payment, and performance bonding, with the performance bond set at 20 percent of the original contract price. Liquidated damages for delivery delays are established at 1,569.67 dollars per calendar day. Construction must adhere to ABS Class standards, USACE safety manuals, and specific AWS and ABS welding specifications. The acquisition process is managed by the Marine Design Center and the Philadelphia Contracting Branch. Bids must be submitted electronically via the Procurement Integrated Enterprise Environment by September 25, 2026, at 2:00 PM EDT. Award will be based on price, with the government evaluating the total price for the basic requirement and all options. The contract includes a phased execution approach covering planning, construction, and delivery, with final inspection and acceptance occurring at the Detroit District location.

W2SD Endist Philadelphia

POSTED

about 14 hours ago

DEADLINE

Dock-Side (DS): CGC ACTIVE AA FY27

Solicitation # 70Z08026QMECP0030

Solicitation 70Z08026QMECP0030 is a firm fixed-price request for quotations for the USCGC ACTIVE (WMEC 618) FY2027 aviation availability. The contract is 100% set aside for small business HUBZone concerns and is managed by the SFLC Procurement Branch 1 of the Department of Homeland Security. The period of performance is scheduled from May 5, 2027, to June 3, 2027, with work performed in Port Angeles, Washington. The scope of work focuses on critical aviation maintenance and preservation, including load testing of 28 Volt DC and 400 Hz power supplies, calibration of aviation fuel flow meters, cleaning and inspection of aviation fuel service tanks, and the preservation of helicopter operating areas. Additional requirements include the repair of flight deck surface and edge lights, talon grid testing, and the renewal of counter measure washdown nozzles. The government will utilize a best value tradeoff process for the award, where technical capability, experience, and past performance are significantly more important than price. Evaluation focuses on the contractor's history with DoD and USCG surface vessels and their workforce capacity. Contractors must adhere to strict quality and safety standards, including NAVSEA Standard Item 009-32 for flight deck certification and SFLC Std Spec 6310 for ship structure preservation. Payment is based on a percentage or stage of completion via the Invoice Processing Platform, with a 10 percent withholding until all deliverables are accepted. The solicitation requires a comprehensive submission consisting of separate volumes for technical capability, experience, past performance, and a detailed price schedule.

Sflc Procurement Branch 1(00080)

POSTED

about 14 hours ago

DEADLINE

Standby Emergency Diesel Generator (SEDG); provide

Solicitation # N6264926Q0485

Solicitation N6264926Q0485 is a request for a Firm-Fixed-Price job order to provide and maintain a temporary pierside Standby Emergency Diesel Generator (SEDG) for the USS NEW ORLEANS (LPD-18) in Sasebo, Japan. The required equipment is a 1,000 kW (1,250 kVA), 440 VAC, 60 Hz, 3-Phase generator. The period of performance is scheduled from October 22, 2026, to January 30, 2027, with an estimated total request value between 5 million and 10 million dollars. A key technical update in revision A02 of the statement of work changes the material source for temporary power cables from Contractor Furnished Material to Government Furnished Material. Eligibility for award is strictly limited to offerors who can demonstrate authorization to do business in Japan per DFARS 252.225-7042 and who possess an active U.S. Navy Master Agreement for Repair and Alteration of Vessels (MSRA/ABR) in the Japan Region. The government intends to make a single award based on the lowest total priced proposal from a responsive and responsible offeror. Proposals must be submitted in Japanese Yen and include a signed SF18 or SF33 along with the required MSRA/ABR certifications. Following Amendment 0001, the response deadline has been extended to September 14, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

20--ACCUMULATOR,HYDRAUL

Solicitation # N0010425RYK73

This firm-fixed-price contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a small business set-aside for the manufacture and procurement of hydraulic accumulators (NSN 7HH 2090 016053873). The procurement is a rated order certified for national defense use and requires compliance with the Defense Priorities and Allocations System. The total quantity was increased from 7 to 18 units via amendment, and the final award is structured as a contract rather than a purchase order. The period of performance is 180 days from the date of the order, with accelerated, early, and incremental deliveries encouraged. Technical compliance is based on the design represented by Cage Code 53711 and Technical Data Package version 004. Quality assurance requires adherence to ISO 9001 standards, and all items must be mercury-free. Physical identification and marking must follow MIL-STD-129, and configuration control is governed by MIL-STD-973. A critical requirement is that DCMA must provide inspection and acceptance of all units at the origin prior to shipment to avoid payment delays. Packaging must comply with MIL-STD-2073-1 for stock and OCONUS shipments, while CONUS shipments may use ASTM D3951. The award is based on the lowest priced, technically acceptable (LPTA) offer, with a 10 percent evaluation preference applied to HUBZone small businesses. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation underwent multiple amendments to extend the closing date, with the final updated deadline for quotes set for September 11, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier/Dealer of Steering Tie Rod Ends

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturer of Steering Tie Rod Ends

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

Supply of Insulating Compound Electrical (NSN 5970-002957658)

Nitrogenous Fertilizer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M126U6073

DLA Land and Maritime is soliciting quotes for the procurement of 3,398 seals under NSN 5330014964243. This requirement may result in an Automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 509 units, with an estimated two orders per year. Delivery is required within 97 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 5F573 233109509643891. This is an electronic RFQ under NAICS code 339991, and all quotes must be submitted electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available. Interested parties should coordinate through the DLA Land and Maritime office in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--PACKING WITH RETAINER

Solicitation # SPE7LX26U002A

This procurement request from DLA Land and Maritime is for NSN 5330001438722 Packing with Retainer under solicitation SPE7LX26U002A. The requirement consists of an initial quantity of 76 units with a delivery window of 97 days after receipt of order. This is a source controlled drawing item, and the items must strictly adhere to the cited drawings and military specifications. Approved sources are limited to CAGE codes 07060 and 99193. The solicitation may result in an Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. There is a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Shipping will be directed to various CONUS and OCONUS DLA Depots. This opportunity is a total set-aside for small businesses under NAICS code 339991, and all quotes must be submitted electronically by September 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

59--CUSHION,EAR

Solicitation # SPE7M126U6067

DLA Land and Maritime is soliciting quotes for the procurement of ear cushions under NSN 5965014857173. This is a total small business set-aside under NAICS code 334310, with an initial requirement of 279 units to be delivered within 83 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 41 units and an estimated two orders per year, with shipments destined for various CONUS and OCONUS DLA depots. Approved sources for this requirement are identified as 1PNR4 40243G-02 and 1PNR4 40243G-07. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation, specifications, or drawings are available, and all submissions must be handled through the electronic portal.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

53--TRACK,SLIDING DOOR

Solicitation # SPE7L126U0721

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of sliding door tracks under NSN 5340015973964. This requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The initial request is for 43 units with a delivery window of 133 days after the order is placed. Items are to be shipped to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of six units. All quotes must be submitted electronically by the deadline of September 24, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7L126U0720

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of helical compression springs under NSN 5360013853389. This request for quotation may result in an Automated Indefinite Delivery Contract with a term of one year or until a total expenditure of 350,000.00 is reached. The contract specifies a guaranteed minimum quantity of one unit, with an estimated one order per year. Delivery is required within 104 days after the order date to various CONUS and OCONUS DLA Depots. Approved sources for this procurement include 07309 112129029 and 07309 112159005. All responsible sources are invited to submit electronic quotes by the deadline of September 24, 2026. Specifications and drawings are not provided as separate documents, and the solicitation is available exclusively through the electronic link provided in the notice.

Spring Manufacturing

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126U6071

DLA Land and Maritime is soliciting quotes for the procurement of 75 circuit card assemblies under NSN 5998014971477. This requirement may result in an automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Delivery is required within 160 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 0KPC5 C98327-1. This is an RFQ process where all responsible sources may submit electronic quotes by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the specified government channels.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX26U002B

DLA Land and Maritime is soliciting quotes for the procurement of butt hinges under NSN 5340016609476. This request for quote may result in an automated indefinite delivery contract with a one year term or until a total of 350,000.00 is reached. The initial requirement specifies a quantity of 48 units to be delivered within 116 days after the order is placed, with a guaranteed minimum quantity of 7 items. Shipments will be directed to various CONUS and OCONUS DLA depots. This opportunity is designated as a total small business set aside under NAICS code 332510. The approved source is identified as 94222 E6-10-420-50. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS