This Solicitation opportunity from Department Of Defense was posted on June 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

24K Environmental Control Unit (ECU) Sole Source to Raytheon

Closed

SPRRA2-26-R-0034Federal

Submission Closed07/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336414

New

Federal

Spacecraft Hardware Procurement and Performance EvaluationThis subcontract, titled Spacecraft Hardware Procurement and Performance Evaluation, supports Department of Defense space systems projects under agency FA4890. The scope of work involves supplying and evaluating spacecraft hardware for prime contractors, specifically providing hardware to emulate space systems and ground stations. The contractor is responsible for conducting performance evaluations of spacecraft bus and payload components within a lab environment to deliver validated hardware and detailed performance reports. The project is categorized under NAICS code 336414 and will be performed in Dahlgren. Interested parties should note the posting date of October 26, 2026, with a response deadline set for November 3, 2026.

POSTED

DEADLINE

Aircraft Maintenance Kit Component Manufacturer/SupplierThis subcontract involves the manufacture and supply of components and assembled aircraft maintenance kits for prime contractors supporting DLA supply contracts. The supplier is responsible for producing or sourcing parts in accordance with TDP Rev A Gen 1 and specific reference drawings 81996, 1007795, 1007792, and 1007798 to deliver the completed Maintenance Kit under NSN 4920016763949. Compliance requirements include the application of Item Unique Identification marking and hazardous material labeling as mandated by 29 CFR 1910.1200. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the project falls under NAICS code 336414. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

ECS Valve Teardown, Evaluation, and RepairThis subcontract with the Department of the Navy, managed by Navsup Weapon Systems Support, involves the teardown, technical evaluation, and repair of an Environmental Control System valve, specifically NSN 7RH 1660-01-668-6579 P8. The selected contractor will perform repairs and modifications according to technical data using precision measurement tools and specialized pressure and flow testing rigs to deliver a fully repaired and certified component. The project is based in Philadelphia and requires strict adherence to AS9100 quality standards and Buy American compliance. Interested parties must submit their responses by November 23, 2026, under NAICS code 336414.

Navsup Weapon Systems Support

POSTED

DEADLINE

First Article Testing (FAT) SupportThis subcontract for First Article Testing Support involves the initial production and validation testing of a First Article unit for prime contractors working on DLA Weapons Support projects. The selected provider is responsible for producing one test unit and coordinating its delivery to the 809 MXSS/MXDEB at Hill AFB, UT, for official government validation. The final deliverables include the validated First Article unit and all associated test data. The project is managed by the Department of Defense under the DLA Weapons Support Electrical Devices Division and will be performed in San Diego, California. Due to the nature of the work, the contractor must maintain JCP certification and ensure full ITAR compliance. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Avionics Installation & Integration (Field Service)This subcontract opportunity, titled Avionics Installation and Integration (Field Service), involves the physical installation and integration of Link 16 systems on US Air Force MC-130J aircraft platforms. The selected contractor will be responsible for installing hardware and wiring, performing system integration, and conducting inspections and testing in accordance with Government-approved engineering data. The ultimate goal is to deliver fully installed and operational Line of Sight Link 16 capability using specialized avionics tooling. Managed by the Department of Defense under agency FA8509 Aflcmc Wiuka, the project falls under NAICS code 336414. Due to the nature of the work, a Secret security clearance is required. The solicitation was posted on October 22, 2026, with a response deadline of November 5, 2026.

POSTED

DEADLINE

Renewable Propulsion System Development (Solar Sails)This subcontract involves the design, development, and manufacture of renewable propulsion systems, specifically solar sails, for prime contractors supporting DARPA Cattle Run projects. The scope of work focuses on engineering high-strength, low-mass sail membranes, precision deployment booms, and the underlying propulsion physics to deliver a fully flight-ready renewable propulsion module. Managed under the Department of Defense and the Defense Advanced Research Projects Agency, the project requires strict adherence to security and eligibility standards. Qualified candidates must hold U.S. Citizenship and maintain CMMC Level 2 or NIST SP 800-171 Rev 2 compliance. The opportunity was posted on October 22, 2026, with a response deadline of November 4, 2026.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

Aircraft Access Door Parts/Materials SupplyThis subcontract involves the supply of aerospace-grade replacement parts, seals, and hardware for aircraft access doors to support prime contractors on Navsup Weapon Systems Support projects. The scope specifically focuses on components associated with NSN 1560-01-560-8326 QE, requiring all materials to be packaged according to MIL-STD-2073 standards. The contractor is responsible for providing certification of origin to ensure compliance with the Buy American and Balance of Payments Program requirements. This Department of Defense initiative falls under NAICS code 336414, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Door Teardown, Repair, and ModificationThis subcontract involves the teardown, evaluation, repair, and modification of aircraft doors for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes executing carcass restoration to A condition and the preparation of Engineering Change Proposals in accordance with DI-SESS-80639E, ultimately resulting in the delivery of a fully restored aircraft door. Qualified providers must possess specialized facilities for aircraft structural repair and maintain certification under ISO 9001 or SAE AS9100. Additionally, all work must comply with the Buy American Act and DFARS specialty metals standards. The response deadline for this opportunity is November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft SSE Component Repair and Modification (NSN 5998-01-567-3889)This subcontract focuses on the repair and modification of aircraft Special Support Equipment, specifically NSN 5998-01-567-3889, for prime contractors supporting Navsup Weapon Systems Support under the Department of Defense. The scope of work involves the complete teardown, technical evaluation, and disassembly of components to perform necessary repairs and modifications. All activities must adhere to the technical requirements outlined in Section C and utilize Technical Data Package Version 001 to ensure all units are returned to Ready-for-Issue status. The contractor is responsible for employing specialized aviation test equipment to verify that all modified and repaired SSE units meet strict operational standards. This project falls under NAICS code 336414 and requires the delivery of fully serviceable equipment. Interested parties should note the response deadline of December 28, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Sole Source to Raytheon | Ukraine PATRIOT Depot Test Equipment (DTE)

Solicitation # SPRRA2-27-R-SP03

The Defense Logistics Agency is conducting market research via a Sources Sought Synopsis to identify qualified manufacturers and suppliers to support the operational readiness of the Ukraine Phased Array Tracking Radar for Intercept on Target (PATRIOT) System. The requirement involves providing Depot Test Equipment (DTE), including PAT243 Oil Processing Stations, PAT24X High Voltage Power Supply Test Stations, CLET TS Cooler Liquid Electron Tube/Transmitter Pumping Unit Test Stations, CDU Testers, Raytheon Test Automatic Continuity Stations (RTACS), and PAO Processors. Additionally, the scope includes site surveys, installation, on-the-job training, installation kit electronic equipment, gold units or emulators, and a five-year supply of test station spares. The government intends to award this contract to Raytheon as the sole responsible source under FAR 6.302-1(a)(1). The selected contractor will be responsible for all recurring and nonrecurring engineering, supply chain management, logistics, and the procurement of long-lead parts. Performance timelines are measured in months after contract award, with site surveys due at 26 months and various hardware deliveries ranging from 31 to 50 months. Essential government furnished property, including a compliant facility and specific fluids such as PAO and EGW, will be provided to support installation and acceptance testing.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

ITQ for iCDPSC (W8703-270048)

Solicitation # WS5811229992

Public Services and Procurement Canada, acting for the Department of National Defence, has issued an Invitation to Qualify for the Interim Canadian Deep Precision Strike Capability. This solicitation seeks to identify qualified suppliers for the future procurement of land-based launch systems, conventional precision-guided munitions, and essential supporting infrastructure, including command-and-control systems, communications, training, and technical maintenance. The objective is to establish an Initial Operational Capability that is deployable, survivable, and interoperable with allied forces to deliver precise effects at extended ranges within contested environments. This opportunity is open to Canadian suppliers as well as those from Ukraine, the NATO community, and the Five Eyes Alliance. Interested parties must respond to solicitation number WS5811229992 by the deadline of November 2, 2026. The process is managed by the Department of Public Works and Government Services, with the primary point of contact being Mark Milloy.

Department of Public Works and Government Services

POSTED

DEADLINE

Manufacturing and Supply of Flexible Tube Coupling Assembly (NSN 4730011993052)This subcontract involves the manufacturing and supply of one flexible tube coupling assembly, identified by NSN 4730011993052, for the USS CHAFEE DDG 90. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is required to fabricate the assembly according to Lockheed Martin Corporation specifications and ensure delivery to the designated performance location in FPO. Strict adherence to quality and logistical standards is mandatory for this contract. Quality control must be implemented per SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The solicitation was posted on October 20, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

8 days ago

DEADLINE

in about 10 hours

AI Contract Overview

The Defense Logistics Agency Aviation issued Solicitation SPRRA2-26-R-0034 as a sole-source procurement for the 24K Environmental Control Unit (ECU) and associated spare parts under an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to Raytheon Company, identified by CAGE code 05716 and designated as a large business with no socioeconomic set-asides. The procurement supports Patriot Ground Support Equipment, focusing on sustainment and modernization through hardware upgrades, with key deliverables including the ADI TPX-57A(V)1 Upgrade Mod Kit and the 24K ECU in multiple color variants (Green, Tan, Sand). Amendment 0003 extended the pricing catalog duration from two to five years, covering fiscal years 2026 through 2030, and revised the minimum order quantities to 50 units for the Radar Mod Kit and 10 units for the ECU, while removing the High Voltage Power Supply and Digital Encoder from the scope. The parts list, updated through multiple amendments, reflects incremental changes to quantities and part configurations, with the total initial requirement for ECU units totaling 206, later adjusted to 45 units of part number 2714M1000-90 in green and 161 units of part number 2714M1000-110 in tan. Proposals must be submitted as separate, un-sanitized cost breakdowns in ProPricer Excel format with all original formulas and tabs intact, accompanied by certified cost or pricing data under TINA thresholds, indirect rate documentation, and compliance with FAR and DFARS requirements, including Limitation on Pass-Through Charges and Organizational Conflicts of Interest disclosures. All communication must occur exclusively through designated points of contact, Kimberly S. Thomas and Anna Phillips, and must be in writing via email only. The place of performance is Andover, Massachusetts, and the offer deadline was extended to April 30, 2026. Offerors must certify compliance with federal restrictions on covered telecommunications equipment and services and provide JCP Certification for export-controlled technical data. No formal packaging, marking, inspection criteria, or billing instructions were specified beyond the requirement for proper part number labeling and full cost transparency.

General Info

DLA sole-sources 206 ECUs from Raytheon for Patriot IFMC program under existing contract.

Agency

Department Of Defense → Hq Defense Logistics Agency

NAICS

336414 - Guided Missile and Space Vehicle Manufacturing

Place of Performance

Andover, MA, USA

Set-Aside

NONE

Documents

Amendment 0003 SPRRA2-26-R-0034 US IDIQ Limited Spares Procurement

1 page · amendment

High

Amendment 001 to RFP SPRRA2-26-R-0034 for 24K Environmental Control Unit

1 page · amendment

High

RFP 24K Environmental Control Unit (ECU) Parts List

1 page · rfp

High

RFP 24K Environmental Control Unit (ECU) Parts List

1 page · sow

High

RFP 24K Environmental Control Unit (ECU) Parts List AMD 001

1 page · rfp

High

RFP SPRRA2-26-R-0034 Amendment 0002 Additional Parts

1 page · amendment

High

RFP SPRRA2-26-R-0034 Amendment 0003 Raytheon

2 pages · amendment

High

RFP SPRRA2-26-R-0034 Amendment 001 for 24K Environmental Control Unit

1 page · amendment

High

RFP SPRRA2-26-R-0034 Amendment 002 for Environmental Control Unit Parts

3 pages · amendment

High

RFP SPRRA2-26-R-0034 for 24K Environmental Control Unit Parts Pricing

5 pages · rfp

High

SPRRA226R0034 Amendment 0002 Updated Parts List

1 page · modification

High

SPRRA226R0034 Amendment 0002 Updated Parts List

1 page · modification

High

AI Contract Breakdown

Uniform Contract Format

Timeline

5 updates

PhaseClosed

PostedDec 5

Sources Sought

Type ChangedDec 10

Sources Sought → Presolicitation

Type ChangedDec 29

Presolicitation → Solicitation

Notice updatedJan 8

Response deadline changed from Jan 29, 2026 to Apr 30, 2026. The notice description changed.

Notice updatedFeb 13

The notice description changed.

Notice updatedFeb 13

The notice description changed.

Notice updatedMar 4

The notice description changed.

Deadline changedJun 4

Response deadline changed from Apr 30, 2026 to Jul 31, 2026.

Response DeadlineJul 31

Deadline has passed

Submission Closed

07/31/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Hq Defense Logistics Agency

Contacts2 people available

OfficeFORT BELVOIR, VA, 22060, USA

Organization / AgencyDepartment Of Defense → Hq Defense Logistics Agency

Office AddressFORT BELVOIR, VA, 22060, USA

Contacts

Kimberly S. Thomas

contact@example.gov

Anna Phillips

contact@example.gov

Full Description

Please see attachment RFP SPRRA2-26-R-0034 for a full description.

Please see attachment "RFP_24K Environmental Control Unit (ECU) Parts List" for a full list of parts.

Please see Amendment 0001 for updated closure date, parts list and quanitity.

Please see Amendment 0002 for updated parts list and quanity changes.

Please see Amendment 0003 for updated parts list, quanity changes and duration period.

More opportunities from Department Of Defense → Hq Defense Logistics Agency

Same awarding agency

NAICS: 561910

Federal

Packaging, Preservation, and ShippingThis contract involves the military-standard packaging, preservation, and shipment of cable assemblies to Redstone Arsenal. The work must comply with MIL-STD-129, MIL-STD-2073-1, and ISPM-15 standards, ensuring that all packaging and shipping procedures meet stringent defense logistics requirements. The contract falls under NAICS code 561910, which pertains to packaging and labeling services, and is managed by the Headquarters of the Defense Logistics Agency within the Department of Defense. The subcontract is set to be performed in Prospect, with the specific focus on adherence to military guidelines for secure and compliant handling of cable assemblies. The contract was posted on January 28, 2026, and is designed to ensure that all shipments are properly preserved, packaged, and shipped to meet defense logistics standards. This contract supports military supply chain integrity by maintaining high standards in packaging and shipment processes.

Packaging and Labeling Services

POSTED

DEADLINE

IUID Marking and Data SubmissionThis contract involves applying MIL-STD-130 compliant Data Matrix Unique Item Identifier (UII) markings to designated items and submitting the corresponding Item Unique Identification (IUID) data to the Department of Defense IUID Registry or the Wide Area Workflow (WAWF) system. The work is classified under the NAICS code 541611, which typically relates to administrative management and general management consulting services. The contract is a subcontract issued by the Defense Logistics Agency under the Department of Defense, with the place of performance specified as Prospect. The primary objective of the contract is to ensure compliance with DoD marking standards for traceability and asset management through accurate UII labeling and proper electronic data submission. This process facilitates enhanced inventory control and lifecycle tracking for DoD assets. The contract was posted on January 28, 2026, and requires adherence to strict regulatory and submission protocols to maintain the integrity and usability of the data within DoD systems.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Government Production Lot Testing (PLT) SupportThis contract involves providing support services for government-conducted Production Lot Testing (PLT) at a specified facility in Prospect. The primary responsibilities include coordinating the testing schedule and preparing all necessary documentation to ensure smooth execution of the PLT process. The work is subcontracted under NAICS code 541380, which pertains to testing laboratories, emphasizing the technical and logistical aspects of the testing support. The contract is issued by the Defense Logistics Agency, part of the Department of Defense, highlighting its importance in supporting military and defense supply chain operations. Although some details like solicitation number, specific agency office address, and point of contact are not provided, the focus remains on facilitating efficient and compliant production lot testing through meticulous coordination and thorough documentation management.

Testing Laboratories and Services

POSTED

DEADLINE

Component Sourcing and Obsolescence ManagementThe contract focuses on the procurement and lifecycle management of long-lead and obsolete electronic components essential for the production of military cable assemblies. This work involves sourcing hard-to-find or discontinued parts to ensure uninterrupted manufacturing and maintenance of defense-related cable assemblies, addressing challenges related to component availability and obsolescence. The effort supports the Department of Defense through the Defense Logistics Agency and is executed as a subcontract under NAICS code 423690, which pertains to electronic parts and equipment wholesaling. The contract is set to take place in Prospect, with the primary task centered on managing the supply chain intricacies involved in military-grade electronic components. This includes not only sourcing but also managing the lifecycle of components that have long lead times or are obsolete, thereby maintaining production continuity and mitigating risks associated with component shortages. The contract was posted in late January 2026 and is critical for sustaining the readiness and reliability of military cable assemblies used in defense systems.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Precision Electrical Cable Assembly ManufacturingThis contract concerns the manufacturing of four units of a military-specification electrical power cable assembly designated for use in the Patriot weapon system. The scope covers full production services including the assembly, rigorous testing to meet military standards, and proper packaging of the cable assemblies to ensure reliability and durability in operational environments. The cable assemblies adhere to the National Stock Number 6150-01-421-5958, indicating their standardized specification for defense logistics. The subcontract, titled "Precision Electrical Cable Assembly Manufacturing," falls under the NAICS code 335931, which pertains to electrical equipment manufacturing. It is issued by the Headquarters Defense Logistics Agency as part of the Department of Defense, with the place of performance located in Prospect. The contract posting date is January 28, 2026, and while specific details such as solicitation numbers or set-aside types are not provided, the contract reflects a focused procurement effort to support critical defense infrastructure through precise and quality-controlled production efforts.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supply of Heat-Treated Wood Packaging Materials

Brick, Stone, and Related Construction Material Merchant Wholesalers

POSTED

DEADLINE

Barcoding and Container Labeling

Packaging and Labeling Services

POSTED

DEADLINE

Compliant Packaging and Preservation

Packaging and Labeling Services

POSTED

DEADLINE

Unique Item Identification (UID) Marking Services

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Cable Assembly Manufacturing and Testing

Current-Carrying Wiring Device Manufacturing

POSTED

10 months ago

DEADLINE

N/A

View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336414

Closed

Federal

Joint Stand-Off Weapon (JSOW) All-Up-Rounds (AURs) Repair for the Hellenic Air Force (HAF)

Solicitation # N00019-26-RFPREQ-WPM201-0043

Naval Air Systems Command

POSTED

CLOSED

REQUEST FOR INFORMATION: LOW-COST INTERCEPTORS

Solicitation # MOSAIC-26-03

POSTED

CLOSED

Teaming & Small Business Participation

NASA Management Office -- Jpl

POSTED

CLOSED

Hypersonic Weapon System Development

POSTED

CLOSED

Solicitation # WILDIRIS

FA8818 Assrd Acs To Spc Ssc/aak-Kt

POSTED

CLOSED

MGEO Satellite Manufacturing & Launch Services

FA2541 Ssc Comrcl Svs Ofc Ssc Cmk

POSTED

CLOSED

Precision Strike Missile (PrSM) Increment 4 Prototype Request for Solutions

Solicitation # W31P4Q269068

POSTED

CLOSED

Landsat 10 Spacecraft _ DRAFT RFP

Solicitation # 80GSFC26D0015

NASA Goddard Space Flight Center

POSTED

CLOSED

A5/7 Affordable Mass Munitions

Solicitation # FA701426xxxxx

POSTED

CLOSED

Sources Sought: Long Range Standoff Production

Solicitation # Sources_Sought_LRSO_AFNWC

FA2103 Afnwc Ndb Pzne

POSTED

CLOSED

Composite Airframe and Structural Design

POSTED

CLOSED

Full-Rate Manufacturing of Nuclear Cruise Missiles

FA2103 Afnwc Ndb Pzne

POSTED

5 months ago

CLOSED

5 months ago

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS