This Pre-Solicitation opportunity from Department Of Defense was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

250 KS4 (RIMSS) Special Support Equipment (SSE)

Closed

SIMACQ-PD-42-0049Federal

Submission Closed05/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M2-26-T-6625

This contract is a solicitation for the procurement of 3,500 units of electrical wire, identified by NSN 6145-01-699-7008 and part number HP3-EXBGE1. The requirement specifies 500 feet per spool and mandates adherence to NEMA HP3 Revision NR dated January 1, 2021. The procurement is conducted under full and open competition with a required delivery date of January 26, 2027, and a delivery window of 136 days after the order. The contract emphasizes strict packaging and shipping standards, requiring compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Specific attention is given to the Advice codes regarding continuous length requirements to ensure multiple unit packs are handled according to the designated code. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4696

This contract, identified as SPE4A0-26-T-4696, is for the procurement of one installation tool with NSN 5120-01-160-9510. The order is associated with Sikorsky Aircraft Corporation and requires adherence to specific DLA technical and quality requirements, including covered defense information and strict packaging standards per ASTM D3951 and MIL-STD-129. The contract specifies a delivery timeframe of five days and designates the inspection and acceptance points at the destination. The item is to be shipped to the LRC-A Illesheim facility in Germany. Quality control is governed by specific sampling plans, with Sikorsky Corporation's alternate plan being acceptable if it meets or exceeds ASQ H1331 or MIL-STD-1916 standards. Item Unique Identification is not required for this procurement. The original required delivery date is set for August 28, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # FA469026Q0050

Solicitation FA469026Q0050 is a firm-fixed-price requirement for the procurement of brand-name Snap-On tools, including custom etching and foam shadowing, for delivery to Ellsworth AFB, South Dakota. The scope of work involves providing a specific set of tools as detailed in Exhibit A, which must be accompanied by custom-cut two-color foam tool shadow trays designed to fit Champion DW1500-060C-FTB toolboxes. A critical requirement is the laser etching of tools with a nine-digit Worldwide Identification number, with specific instructions that safety glasses must be etched on the frame rather than the lens. The contract is a total small business set-aside, with additional references to HUBZone and Service-Disabled Veteran-Owned Small Business concerns. The delivery period is established as 120 calendar days from the date of award receipt. For items with a unit acquisition cost of 5,000 dollars or more, the contractor must comply with strict Item Unique Identification (IUID) marking and reporting standards, including ISO/IEC 16022 and MIL-STD-130. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotes must be submitted via email by 1:00 PM MDT on September 14, 2026, and must include a specification breakdown, a signed SF 1449, and completed representations and certifications. Award will be based on a best-value determination considering price and technical acceptability on a pass/fail basis.

POSTED

DEADLINE

51--HANDLE,EXTENSION,WRENC

Solicitation # SPE4A6-26-U-4172

Solicitation SPE4A6-26-U-4172 is a request for quotations issued by the Department of Defense ASC Commodities Division for the procurement of wrench extension handles, identified by NSN 5120999747623. This is a total small business set-aside procurement that may result in a unilateral indefinite delivery contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual quantity is 18 units, with a guaranteed minimum of one unit and a minimum delivery order quantity of 9 units. Quotes must be submitted electronically via DIBBS by September 25, 2026. The contract is fixed-price and requires delivery FOB Origin to various continental United States depots. Packaging must adhere to ASTM D3951 and RP001 standards, while marking and labeling must comply with MIL-STD-129 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination. Payment processing is managed through the Wide Area WorkFlow system. The procurement includes specific compliance requirements for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

WRENCH, 3/8 X 7/16", SHORT, BOX END

Solicitation # INF-2026-0377

The City of Houston is soliciting bids for the procurement of a 3/8 x 7/16 inch short box end wrench, specifically identifying the Snap-on Model XS1214A 12-Point SAE Flank Drive Short 10 degree Offset Box Wrench as the standard. While this specific model is listed, the City will accept approved equals provided that the bidder submits descriptive literature including the manufacturer's name, product name, and product number. The contract will be awarded to the responsive and responsible bidder offering the overall low net bid meeting all specifications, though the City reserves the right to award based on individual items, combinations of items, or the overall best bid. Bidders must adhere to strict submission guidelines, using the provided bid documents and avoiding the use of company quotation forms with alternative terms. Required certifications include representations of being an equal opportunity employer, non-collusion, and compliance with Texas Government Code regarding boycotts of Israel, energy companies, and firearm entities, as well as zero tolerance for human trafficking. Delivery terms are FOB destination as specified on individual purchase orders, and the bidder must state the proposed delivery time in calendar days. Payment is due thirty days after the City approves the invoice or accepts the goods, whichever occurs later.

POSTED

DEADLINE

Supply of Socket Head Screw Keys (NSN 5120016191196)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Electrical Power Cable (NSN 6145016669522)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Socket Wrench Adapter Supplier

ASC COMMODITIES DIVISION

POSTED

DEADLINE

YOKE, MECHANICAL PULLER

Solicitation # SPE4A6-26-T-28TX

Solicitation SPE4A6-26-T-28TX is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 15 mechanical puller yokes, identified by NSN 5120-01-484-3217. The delivery is set for 128 days after award, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This procurement prohibits the use of additive manufacturing processes and requires compliance with the Buy American Act and Berry Amendment. The contract mandates strict quality and safety standards, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331 and adherence to NAVSEA 5100-003D regarding mercury containment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and a price evaluation preference for SBA-certified HUBZone small business concerns. Inspection and acceptance will occur at the destination per FAR 52.246-2.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ADAPTER, SOCKET WRENCH

Solicitation # SPE4A6-26-T-28VM

Solicitation SPE4A6-26-T-28VM, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 12 units of socket wrench adapters, identified by NSN 5120017380513. The procurement is categorized under NAICS code 332216 and requires delivery within 20 days after receipt of order, with an original required delivery date of August 25, 2026. Shipping is designated as FOB Origin, with the destination for both inspection and acceptance located at the DLA Distribution Albany facility in Georgia. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and DLA Packaging Requirements for Procurement (RP001), with all labeling following MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Offerors must comply with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on the use of additive manufacturing unless specifically authorized. Quotes must be submitted via the DIBBS portal by September 18, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-333Y

This contract is for the procurement of magnet wire, specifically part number MW020CHX105105UNC under NSN 6145016796484. The order consists of two reels, with each reel weighing 65 lbs. The procurement is subject to full and open competition and must adhere to NEMA MW1000 Revision NR standards and DLA technical and quality requirements. Delivery is required within 168 days, with a need ship date of March 9, 2027, and an original required delivery date of December 8, 2026. The items are to be delivered FOB Origin to the DLA Distribution Depot Hill in Utah. Strict packaging and marking guidelines apply, including the use of orientation arrows and specific stenciled warnings stating that the sensitive material must not be laid on its side. Inspection and acceptance will occur at the destination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

INSTALLATION AND EQUIP

Solicitation # SPE7L5-26-T-5405

Solicitation SPE7L5-26-T-5405 is a request for quotations issued by DLA Land and Maritime for the procurement of three vehicle installation and equipment kits, specifically identified as critical application items with part number 3709746 from Oshkosh Defense LLC and NSN 2540015408657. The procurement is categorized under NAICS code 332216. Delivery is required within 168 days after order, with a need ship date of March 9, 2027, and an original required delivery date of May 20, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 for non-hazardous commercial packaging. All shipments must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. For hazardous materials, suppliers must comply with FED-STD-313, TQ requirement IP025, and the Hazard Communication Standard under 29 CFR 1910.1200, including the submission of Safety Data Sheets. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements.

LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The Naval Surface Warfare Center, Philadelphia Division, through its Surface Combatant/Gas Turbines Engineering Branch, is advancing a critical repair initiative for the Ship Service Gas Turbine Generator (SSGTG), specifically targeting the 250-KS4 model. This effort seeks to establish intermediate-level maintenance procedures at Regional Maintenance Center turbine shops to enable the replacement of turbine assemblies, a capability previously unavailable to the Navy. By implementing these new procedures, the Navy will gain the ability to refurbish previously unusable carcasses, dramatically cutting repair turnaround times and enhancing fleet readiness. The initiative directly supports sustained operational readiness by revitalizing critical power generation assets with improved in-house repair capacity. The procurement for the necessary Special Support Equipment (SSE) is being conducted under solicitation number SIMACQ-PD-42-0049, issued as an 8(a) Sole Source opportunity to support small business developmental goals under NAICS code 332216. The presolicitation was posted on May 11, 2026, with a response deadline set for May 14, 2026. The activity is led by the NSWCPD office in Philadelphia, Pennsylvania, with Stefan Kitzinger serving as the primary point of contact. All performance is expected to occur in Philadelphia, aligning with the existing infrastructure and expertise at the Regional Maintenance Center, ensuring seamless integration of the new repair procedures with current logistical and maintenance workflows.

General Info

Naval contract for 250 KS4 turbine repair equipment, improving Navy maintenance and turnaround times.

Agency

Department Of Defense → Nswc Philadelphia DivisionView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

Philadelphia, PA, USA

Set-Aside

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 11

Presolicitation

Response DeadlineMay 14

Deadline has passed

Submission Closed

05/14/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Nswc Philadelphia Division

Contacts1 person available

OfficePHILADELPHIA, PA, 19112-1403, USA

Organization / Agency

Department Of Defense → Nswc Philadelphia Division

View Agency Profile

Office AddressPHILADELPHIA, PA, 19112-1403, USA

Contacts

Stefan Kitzinger

contact@example.gov

Full Description

The Surface Combatant/Gas Turbines Engineering Branch (Code 424) of the Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is the In-Service Engineering Agent (ISEA) for the Ship Service Gas Turbine Generator (SSGTG). The Navy is establishing intermediate-level (I-level) procedures for the replacement of turbine assemblies at Regional Maintenance Center (RMC) turbine shops. This initiative will provide the Navy with a repair capability for 250-KS4s not previously possessed, significantly reducing repair turnaround times and enabling the refurbishment of previously unusable carcasses.