Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Piping & Brazing (HM&E)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine Piping and Brazing (HM&E) supports the Naval Surface Warfare Center Philadelphia Division within the Department of Defense. The scope of work involves the fabrication, installation, and repair of shipboard piping and pressure vessels. Key technical responsibilities include targeting, fitting, bending, threading, and brazing of pipes, as well as conducting pressure testing for watertight compartments to ensure structural integrity. To qualify for this project, personnel must hold specific certifications per T9074-AQ-BIB-010/248 and S9074-AR-GIB-010/278, along with an OSHA 10-hour Maritime Shipyard certification. The primary deliverables for the contractor are the completed installation of piping systems and the provision of formal watertight integrity certifications.

General Info

Subcontract for marine piping fabrication, installation, and watertight testing for the Department of Defense.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of PD-25-0222.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NSWCPD BIG BLUE 4 Pre-Solicitation Notice

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs fabrication, installation, and repair of shipboard piping and pressure vessels for prime contractors on Naval Surface Warfare Center Philadelphia Division projects. Executes targeting, fitting, bending, testing, and threading of shipboard pipe, brazing, and pressure testing of watertight compartments. Requires certification per T9074-AQ-BIB-010/248 and S9074-AR-GIB-010/278, and OSHA 10-hour Maritime Shipyard certification. Delivers installed piping and watertight integrity certifications.

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The contractor is required to provide a hydro pneumatic expansion tank, 3 inch Type L copper piping with copper sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220, and inquiries can be directed to the primary point of contact, Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

DEADLINE

in about 1 month

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the thorough cleaning of twelve AHUs and twenty-eight coils located in the Kilmer and Edison Dormitories, as well as the cleaning of supply, return, and outside-air ductwork and air distribution components. The contractor is responsible for installing durable, sealed access panels where necessary and repairing any affected ceiling surfaces. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and must be submitted via email using the MTC Bid for Lump Sum Contract form, accompanied by a detailed cost breakout on company letterhead. A physical site visit and signature on the attendance roster are mandatory prerequisites for bidding. For projects valued at $25,000 or more, bidders must provide a bid bond equal to 20% of the base bid, and the awarded contractor will be required to provide performance and payment bonds from a surety with at least an A- rating. Award decisions will be based on overall best value. Compliance requirements include adherence to Davis-Bacon prevailing wage rates for Middlesex County and various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, security, and privacy. Contractors must provide a Unique Entity ID (UEI) and complete a supplier self-certification packet. Final acceptance of work is contingent upon a written confirmation from the Center following a comprehensive inspection and the submission of a final project report containing pre- and post-cleaning photographs and completion checklists.

Edison Job Corps

POSTED

DEADLINE

WOJC - Multi-Building Plumbing Leak Repair Project

Solicitation # WOJC – Multi-Building Plumbing Leak Repair Project

Education and Training Resources is seeking quotes for a subcontracting opportunity to perform multi-building plumbing leak repairs at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work includes replacing leaking shower P-trap drain pipes in Harris Hall dormitory Rooms 123 and 213, repairing a cracked drain pipe in the pipe chase of Room 216, and replacing approximately ten linear feet of leaking heat pipe in the Wellness Department ceiling, as well as heat pipe section replacements in the Administration Building and King Hall. All work must comply with the Massachusetts State Plumbing Code, International Plumbing Code, and ASTM/ASME standards. Contractors are required to perform hydrostatic or operational leak testing and provide a signed punch list and warranties upon completion. Bids are due by 4:00 PM on October 30, 2026, and must include a detailed cost breakdown, a proposed service schedule, and a bid sheet with fee-for-service information. Award selection is not based solely on the lowest price; ETR will evaluate costs, qualifications, and administrative compliance. Required submission documents include a SAM.gov UEI number, active registration, W-9, business licenses, certificates of insurance, and a signed Vendor Acknowledgement form. The project is subject to the Davis-Bacon Act and Service Contract Act, requiring the submission of weekly certified payroll reports. Depending on the project value, payment and performance bonds may be required for contracts exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

DEADLINE

MJCC EXHAUST FANS BLD. 1429

Solicitation # mjcc-exhaust-fans-bld-1429

The Muhlenberg Job Corps Center, operated by Insights Training Group LLC, is soliciting fixed-price quotes from qualified HVAC and mechanical contractors to restore the exhaust fan and louver systems in Building 1429 located in Kentucky. The scope of work includes the inspection, repair, and replacement of various components across eight exhaust fans, specifically replacing motors and selector switches for fans 2 and 4, relocating a thermostat for fan 3, installing missing components for fan 5, and replacing a louver actuator for fan 7. Additionally, the contractor must perform system-wide replacements of aged thermostats, relays, and louver actuators while ensuring all work complies with applicable building codes, manufacturer requirements, and OSHA and EPA regulations. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Award will be granted to the responsible offeror whose quote is technically acceptable and represents the lowest price. Proposals must be submitted by October 30, 2026, and must include line-item pricing for each fan, separate pricing for system-wide replacements, and evidence of Kentucky state licensing and registration. Contractors are required to adhere to Davis-Bacon Act labor standards, submit weekly certified payroll with invoices, and provide proof of insurance. For contracts exceeding 100,000 dollars, payment bonds are required per the Miller Act, and all offerors must provide proof of their ability to secure performance and payment bonding.

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

DEADLINE

Keystone Job Corps HVAC Units Maintenance

Solicitation # keystone-job-corps-hvac-units-maintenance

Keystone Job Corps is soliciting proposals for annual preventative maintenance on 46 HVAC units located in Pennsylvania. The scope of work includes the replacement of filters and belts, cleaning of all condenser coils, and operational verification of the equipment by service technicians. The units are distributed across several facilities, including 32 units in the dorms, 4 in recreation, and 3 each in the dining hall, culinary, and academic buildings, with one unit located in the welcome center. This solicitation is set aside for small businesses under NAICS code 238220. Interested parties must submit their responses by October 30, 2026. The primary point of contact for this opportunity is Anthony Abreu.

Keystone Job Corps

POSTED

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The project is estimated to have a construction magnitude between 250,000 and 500,000 dollars. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Primary NAICS codes associated with the project include 238220, 238210, and 238290. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves eliminating system leaks and replacing failing infrastructure in the Men's Dormitory (Building CM), Women's Dormitory (Building CW), and Recreation Building (Building D). Key deliverables include the demolition and removal of the existing distribution piping network and air compressor, followed by the installation of a new system and compressor sized according to NFPA standards. All work must comply with NFPA 25 (2023 Edition) and original equipment manufacturer specifications. The contractor must complete all work within 30 consecutive business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must include a signed bid form and a detailed cost breakout. A physical site visit is mandatory prior to bid submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. Evaluation is based on overall best value and bidder responsiveness. The contract is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Compliance requirements include adherence to Davis-Bacon Act prevailing wage rates for Idaho, submission of weekly certified payroll reports, and compliance with FAR clauses regarding executive compensation reporting, anti-kickback procedures, and the Buy American Act. First-tier subcontractors with awards exceeding $45,000 must disclose debarment status per FAR 52.209-6. Final payment is contingent upon a successful final inspection, submission of a Notice of Final Completion, and the provision of two complete sets of Operation and Maintenance manuals.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

in about 1 month

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing subcontractors for the replacement of domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. The project involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of temporary hot water arrangements to ensure the center remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award selection is based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict center security and conduct rules. Required submission documents include a completed vendor questionnaire with UEI and NAICS codes, a current W-9, and applicable New York State licenses. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

DEADLINE

MJCC HVAC BLD. 1403-04 B HALL

Solicitation # mjcc-hvac-bld-1403-04-b-hall

The Muhlenberg Job Corps Center, operated by Insights Training Group LLC, is soliciting fixed-price quotes for an HVAC project at Building 1403-04 B Hall in Kentucky. The scope of work requires the contractor to provide all labor, materials, equipment, and supervision to install two 4-ton Trane 17 SEER split systems using R-454B refrigerant, two 95% AFUE high-efficiency gas furnaces, and matching indoor evaporator coils. Additional requirements include the installation of a Honeywell Pro 8000 programmable thermostat with a remote sensor, new refrigerant line sets, filter racks, and condensate drain piping. The project must be completed within 45 days of award, with all work adhering to manufacturer specifications, local codes, and OSHA and EPA regulations. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. To be considered technically acceptable, offerors must provide a fixed-price quote, evidence of Kentucky state licensing and registration, a W-9, a completed New Vendor Profile, a minimum 90-day bid guarantee, and proof of ability to secure performance and payment bonding. Award will be granted to the responsible offeror with a technically acceptable quote and the lowest price. Contractors must comply with Davis-Bacon Act labor standards and certified payroll wage requirements. Weekly certified payroll and a signed Statement of Compliance must accompany every invoice for payment to be processed. Furthermore, contractors are required to provide Materials Safety Data Sheets for all products used on-site and maintain a chemical application log. Final acceptance is contingent upon a substantial completion walk-through conducted by the center director and the successful verification of proper zoning and temperature control. Quotes are due by October 30, 2026.

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building in New Mexico. The scope of work includes the removal of damaged units and the installation of new Bosch 1-ton units or an equivalent model, including all necessary ducting, electrical wiring, thermostats, flexible hoses, and pressure valves. Additionally, the contractor must install smoke dampers with fusible links in all vents leading into the plenum and ensure all materials used in the plenum are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission of weekly certified payroll reports for invoice approval. Proposals exceeding $100,000.00 require 100% payment and performance bonding upon award. Qualified bidders must be licensed, certified, and insured, providing a detailed proposal that includes a safe work process, a full cost breakdown for labor and materials, equipment cut sheets, warranty information, and a proposed payment schedule. Proposals are due by November 7, 2026.

Career Systems Development Corporation

POSTED

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the necessary new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves the location, removal, and repair of compromised piping up to 4 inches in diameter, including excavation and insulation, at two specific sites: behind Singletary Hall and on the east side of Harris Hall. All work must adhere to industry standards, OSHA regulations, and applicable building codes, including the National Electrical Code and NFPA Standard No. 101. The selected contractor must provide a one-year equipment and workmanship warranty and submit weekly certified payroll reports. Bids are due by 4:00 PM on November 6, 2026, and must be submitted to Garrett Owens via email or physical delivery. A complete proposal requires a detailed cost breakdown on a Fee-For-Services bid sheet, a proposed project schedule, Massachusetts licensing, and a comprehensive vendor packet including a W-9, Certificate of Liability, and Vendor Acknowledgement form. The winning bidder must maintain an active SAM.gov registration and a Unique Entity ID. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Depending on the project value, payment and performance bonds may be required for contracts exceeding 35,000 dollars. Compliance with the Davis-Bacon Act or Service Contract Act regarding prevailing wages is mandatory.

Westover Job Corps Center

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Electrical Enclosure & Control System FabricationThis subcontract for Electrical Enclosure and Control System Fabrication supports the Naval Surface Warfare Center, Philadelphia Division. The scope of work involves the manufacture of specialized electrical enclosures and control valve assemblies for prime contractors, specifically fabricating MKIII REE, SEE, Mini-AU, AU, and various cooling, cleaning, and pulper control valves according to NAVSEA specifications. Performance of the contract takes place in Philadelphia. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and comply with NIST SP-800-171 and DFARS 252.246-7007 standards for supply chain traceability. The project falls under NAICS code 335999 and requires the final delivery of completed enclosures and valve assemblies.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solid Waste Shredder FabricationThis subcontract for Solid Waste Shredder Fabrication involves the production and testing of Mod I Metal and Glass Shredders as well as Mod I Plastics Waste Shredders. Working for prime contractors on projects for the Naval Surface Warfare Center, Philadelphia Division, the selected provider must manufacture units according to NAVSEA drawings of record for Top Level Assembly and Interface. The final deliverable consists of fully completed and tested shredder units. The project is managed under the Department of Defense and requires strict adherence to ISO 9001:2015 and NIST SP-800-171 compliance standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this effort categorized under NAICS code 333999.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Pulper System Fabrication (Large & Small)This subcontract involves the fabrication and testing of Mod I Large and Small Pulper systems for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The selected provider is responsible for manufacturing these systems in strict accordance with NAVSEA drawings and conducting all necessary testing based on specified interface drawings to ensure full operational functionality before delivery. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001:2015 and NIST SP-800-171 compliance. Performance will take place in Philadelphia, with the primary objective being the delivery of completed and verified Pulper systems that meet all technical and security standards.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Plastics Waste Processing Equipment (PWP) FabricationThis subcontract involves the fabrication, production, and testing of Mod I and Mod II Plastics Waste Processors and Mod I CMU Assemblies for the Naval Surface Warfare Center, Philadelphia Division. The selected contractor is responsible for manufacturing equipment according to NAVSEA drawings of record and conducting rigorous testing as specified in the statement of work attachments to ensure the delivery of fully completed and tested units. Performance of this contract requires strict adherence to quality and security standards, including ISO 9001:2015, NIST SP-800-171, and DFARS 252.246-7007 compliance. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 333999, supporting Department of Defense initiatives.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Marine Electrical Installation & IntegrationThe Marine Electrical Installation and Integration subcontract involves the installation and integration of electronic and electrical systems for prime contractors supporting the Naval Surface Warfare Center Philadelphia Division. The scope of work covers both shipboard and shore-based platforms, with specific requirements for system integration, installation support, bonding and grounding verification, and the delivery of insulation resistance reporting. To execute this contract, the provider must utilize specialized electrical testing equipment and bonding and grounding tools. Personnel are required to hold Secret security clearances, OSHA 10-hour Maritime Shipyard certifications, and Electrical WAF/tag-out training. The final deliverables consist of fully certified systems and comprehensive insulation resistance reports.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 11 hours ago

DEADLINE

Specialized Marine Material Supply (Level I)This subcontract for Specialized Marine Material Supply (Level I) involves the procurement and delivery of high-criticality Level I materials, components, and raw stock, including aluminum, steel, and piping, for prime contractors working on Naval Surface Warfare Center Philadelphia Division vessels. The contractor is responsible for ensuring all supplied materials meet strict NAVSEA Level I quality standards and are delivered with full traceability and comprehensive inspection records. Key compliance requirements for this contract include the implementation of a NAVSEA Level I compliant program, the provision of Dimensional Inspection Records, and Mercury Free Certification. Operating under NAICS code 423510, the provider must guarantee that all materials are certified and meet the rigorous technical specifications required by the Department of Defense.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Marine CAD Design & Engineering ServicesThe Marine CAD Design and Engineering Services subcontract supports prime contractors on shipboard modifications for the Naval Surface Warfare Center Philadelphia Division. The scope of work includes design development, prototype engineering, technology insertion planning, and the creation of technical documentation and Integrated Logistics Support materials using marine-grade CAD software. To ensure compliance and security, the contractor must maintain ISO-9001 Quality Systems and hold a Secret clearance for handling classified designs. Key deliverables for this effort consist of technical drawings, prototype designs, and comprehensive ILS documentation under NAICS code 541330.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Marine Structural Fabrication & WeldingThe Marine Structural Fabrication and Welding subcontract involves the fabrication and installation of steel and aluminum structural components for ship and submarine structures at the Naval Surface Warfare Center Philadelphia Division. The scope of work includes cutting, rolling, shaping, grinding, fitting of stock forms, and plate welding. The selected contractor is responsible for delivering all fabricated components along with comprehensive weld inspection records. Strict compliance with industry and safety standards is required, specifically MIL-STD-1689A and T9074-AB-GIB-010/1688 certifications. Additionally, the contract mandates non-destructive weld testing and requires personnel to hold OSHA 10-hour Maritime Shipyard certification. This project falls under NAICS code 332312 and supports prime contractors operating within the Department of Defense.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

Fairbanks Morse EDG Owners Group

Solicitation # N64498-26-SIMACQ-PD-42-0343

Professional Organizations

POSTED

about 11 hours ago

DEADLINE

BIG BLUE MACHALTS

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a requirement titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is managed by the office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 12, 2026. For further inquiries or detailed specifications, the primary point of contact is Anthony Ricciardi, who can be reached via email or phone. Additional documentation and submission details are available through the provided government workspace link.

Ship Building and Repairing

POSTED

about 11 hours ago

DEADLINE

NSWCPD BIG BLUE 4 Pre-Solicitation Notice

Solicitation # PD-25-0222

The Naval Surface Warfare Center Philadelphia Division (NSWCPD) has issued a pre-solicitation notice for the Big Blue 4 (BB4) procurement, identified by solicitation number PD-25-0222. This initiative aims to establish a Multiple Award Contract (MAC) to provide industrial support for installations and upgrades on U.S. Navy surface ships, aircraft carriers, submarines, service craft, Military Sealift Command vessels, Foreign Military Sales platforms, and land-based test sites. The scope of work encompasses design, development, prototype engineering, system integration, and on-site technical support, including structural, piping, ventilation, and electrical modifications. The government intends to utilize various contract types for task orders, including Cost-Plus-Fixed-Fee (both Level of Effort and Completion), Firm-Fixed-Price, and Fixed-Price Incentive. To be eligible for future RFP access and award, vendors must meet stringent mandatory requirements. Possession of a valid and certified DD Form 2345 Militarily Critical Technical Data Agreement is required to access technical packages. Additionally, contractors must maintain a SECRET facility clearance, an approved accounting system, and a NAVSEA/NSWCPD approved Quality Management System. Cybersecurity compliance is critical, as prospective contractors must hold CMMC Level 2 status in the Supplier Performance Risk System prior to award, with a requirement for a C3PAO assessment score above 88 starting in November 2026. The award structure involves a base contract with an unfunded ceiling for a five-year period, followed by a minimum guaranteed dollar amount task order for each MAC holder, with subsequent task orders competed among the holders.

Ship Building and Repairing

POSTED

about 11 hours ago

DEADLINE

PD-33-0001; Solid Waste Pulper

Solicitation # N64498-27-RFPREQ-PD-33-0001

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research via a Sources Sought notice for the production, testing, and delivery of solid waste processing equipment for naval ships. The requirement includes the procurement of plastic waste processing equipment, large and small pulpers, and solid waste shredders, specifically Mod I Metal and Glass Shredders and Plastics Waste Shredders, as well as associated control valves. The anticipated contract will be a Firm-Fixed-Price IDIQ with a five-year period of performance, including a 60-month ordering period. Manufacturing and testing will occur at the contractor's facility, with deliveries made to NSWCPD Philadelphia and various U.S. Navy ship construction or alteration sites, including locations in Pennsylvania, Virginia, Wisconsin, Mississippi, and Maine. Interested businesses, including large and small concerns such as HUBZone, 8(a) SDB, and SDVOSB, must submit a capability statement of no more than eight pages by 6:00 PM EST on November 12, 2026. Submissions must demonstrate prime contractor experience with similar requirements, the technical ability to perform at least 50 percent of the work with internal employees, and the capacity to manage the project's magnitude. The equipment must be manufactured according to NAVSEA drawings of record and adhere to ISO 9001:2015 quality standards. Additionally, contractors must comply with DFARS 252.246-7007 regarding counterfeit part prevention and NIST SP-800-171 for the protection of Controlled Unclassified Information. A formal Request for Proposal is expected to be issued in April 2026 via SAM.gov.

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS