This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on April 6, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

42--JLENS SUPPORT

Closed

W9124Q12JLENSFederal

Submission Closed04/10/2012, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed by the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their bids through the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts required to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling the tractor, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination No. 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding equal opportunity, combating trafficking in persons, and restrictions on foreign purchases.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

SMDOT Elevator Maintenance

Solicitation # 12701633

The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators, including two passenger elevators and one freight elevator, located at 1620 6th Street. The scope of work requires monthly systematic examination, lubrication, and repair of components such as traction machines, hydraulic pump units, and controllers, in compliance with California Administrative Code Title 8, Section 3000(h). The contractor must provide a maintenance supervisor, maintain a local warehouse of OEM replacement parts, and ensure a one-hour emergency response time during normal business hours. Deliverables include monthly testing of emergency recall and override operations, with results recorded on check-off sheets and maintained in on-site logs. Bids must be submitted electronically via the OpenGov portal by November 9, 2026. Qualified bidders must possess a valid C-11 California contractor's license and provide a current DIR registration. The contract award is based on a best-value determination rather than the lowest price, with evaluation criteria weighted across experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City reserves the option to extend the agreement for four additional one-year renewal periods. Required documentation for submission includes a Levine Act Disclosure, experience statement, and non-collusion declaration. Depending on the award amount, successful bidders may be required to provide a payment bond for contracts exceeding $25,000, an Oaks Initiative Disclosure for annual awards over $25,000, and a Living Wage Certification for contracts exceeding $54,200. Additionally, the contractor must maintain comprehensive insurance naming the City of Santa Monica as an additional insured and comply with Title II of the Americans with Disabilities Act.

D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

DEADLINE

CNG Fueling Station Maintenance and Repair Services

Solicitation # 2026-RFP-0441

The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities: one for the Fleet Services Division and one for the Department of Airports located at 6730 Aviation Drive. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance on slow fill and fast fill dispensing systems, as well as major services at 4,000 and 8,000 hour benchmarks. Service requirements include 24/7 availability, with on-site response times of 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term, with the County reserving the right to extend for up to four additional one-year terms upon mutual agreement. Award selection is based on a points-based scoring method considering factors other than price alone, with a two-percent price preference available for State Certified Micro-Business enterprises. Proposers must provide a Public Works and Prevailing Wage Contractor Registration number and certify compliance with employment and wage reporting requirements. Proposals must be submitted electronically by October 30, 2026. Payment will be processed via the ePayables card program or hardcopy checks following the inspection and acceptance of services.

DGS: CAPSD - Procurement

POSTED

DEADLINE

Vehicle Repair - Unit 2610 - Fleet

Solicitation # 321

Jefferson Parish Government is soliciting bids for the repair of a 2014 John Deere Tractor for its Department of Fleet Management. The scope of work includes diagnosing why the equipment fails to restart after running, replacing a non-operational fuel filter system, and draining, flushing, and refilling the fuel tank to remove debris contamination. The contractor is responsible for providing all necessary labor, materials, equipment, and transportation. The equipment is currently located at Sunshine Equipment in Covington, Louisiana. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement for the award is strict adherence to insurance standards per Jefferson Parish Resolution No. 136353 or No. 141125. Specifically, the contractor must maintain Garage Keeper’s Insurance of 500,000 dollars per occurrence, along with Commercial General Liability, Business Automobile Liability, and Worker’s Compensation coverage. The apparent low bidder must provide final insurance certificates within ten calendar days of the bid opening or face rejection. All costs, including incidentals, must be included in the total proposed bid amount.

Jefferson Parish Government

POSTED

DEADLINE

ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING

Solicitation # BPM059230

The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.

Maryland Transit Administration

POSTED

DEADLINE

IFB 26C091005 - Hangar Door Hydraulic System Upgrade Services - CHP Academy Special Weapons and Tactics (SWAT)

Solicitation # 26C091005

The Department of the California Highway Patrol (CHP) is soliciting bids for Invitation for Bids (IFB) 26C091005 to perform a complete hydraulic system upgrade for two hangar doors at the CHP Academy SWAT facility in West Sacramento, California. The scope of work requires the contractor to provide all labor, materials, and equipment, including the installation of hydraulic power units, heavy-duty cylinders, rebuild kits, high-pressure hoses, and climate-appropriate fluid. The anticipated period of performance is from January 1, 2027, to June 30, 2027. A mandatory site walk-through was scheduled for November 9, 2026, and the final response deadline is November 23, 2026. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement is a minimum of 5% Disabled Veteran Business Enterprise (DVBE) participation, though incentives are available for higher participation levels. Bidders must comply with California prevailing wage laws, the Americans with Disabilities Act, and various safety and building codes. Depending on the final contract value, performance and payment bonds may be required for amounts exceeding 10,000 and 25,000 dollars, respectively. Submission requires a physical bid package containing specific certifications, including the Bidder Declaration, Non-Collusion Affidavit, and California Civil Rights Certification.

Department of the California Highway Patrol

POSTED

DEADLINE

Commercial Dishwashing & Steam Equipment ServicesThis subcontract opportunity with the Georgia Institute of Technology involves providing specialized repair and preventative maintenance for commercial dishwashers and steam-based equipment within dining facility projects. The scope of work includes critical technical tasks such as descaling boilers, repairing pumps, cleaning spray arms, and replacing steam valves to ensure all systems remain fully operational. Qualified candidates must hold a valid plumbing or mechanical license to perform these services. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 811310.

Georgia Institute of Technology

POSTED

DEADLINE

Commercial Hot-Side Equipment Repair & MaintenanceThis subcontract for Commercial Hot-Side Equipment Repair and Maintenance involves providing repair and preventative maintenance services for commercial cooking and heating equipment at Georgia Institute of Technology dining facilities. The scope of work includes burner cleaning, pilot light repair, calibration of ovens and broilers, and the replacement of heating elements. The primary objective is to ensure all cooking equipment is safe and operational, with the delivery of completed preventative maintenance checklists. Qualified contractors must hold a mechanical license or a gas fitter certification to perform these services. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 811310 and is intended for those working as subcontractors for prime contractors on these specific institutional projects.

Georgia Institute of Technology

POSTED

DEADLINE

Kitchen Equipment Repair & PM Services for GT Dining

Solicitation # PE-50300-RFQ-2027-000000353

The Georgia Institute of Technology is soliciting proposals under solicitation number PE-50300-RFQ-2027-000000353 for kitchen equipment repair and preventative maintenance services. The scope of work involves providing these essential maintenance and repair services for the Georgia Tech campus located in Atlanta, Georgia. This solicitation was posted on October 28, 2026, and requires responses to be submitted by November 13, 2026, at 5:00 PM UTC. Interested parties should coordinate with the primary point of contact, Anaya Carter-Merritt, and submit their proposals through the designated agency portal.

Georgia Institute of Technology

POSTED

DEADLINE

271982 - Generator Monitoring - Houston Co Health Dept

Solicitation # SRC0000037434

Solicitation SRC0000037434 is a sole source procurement for generator monitoring services for the Houston County Health Department in Alabama. The contract is managed by the State of Alabama and is subject to a maximum total cost of 25,000 dollars. The agreement allows for annual renewals by both parties for a total duration of up to five years from the effective date. The contract is governed by the Standard Terms and Conditions for Quick Quotes, incorporating the Department of Finance Administrative Code and designating Montgomery, Alabama, as the sole venue for litigation and dispute resolution. Key requirements for the supplier include registration with the Alabama Secretary of State for foreign entities, enrollment in the E-Verify program, and certification of compliance with Alabama state and local tax laws. The State of Alabama maintains the right to inspect all products before acceptance, and payment is processed via electronic methods such as P-cards or EFT. Suppliers must submit all responses electronically through the Alabama Buys portal.

POSTED

DEADLINE

IFB #26028 - 295.00 - Elevator Maintenance on the Governor Mario M Cuomo Bridge for NY Division

Solicitation # 49244

The New York State Thruway Authority is soliciting bids for the maintenance, inspection, repair, and testing of eight Fraco SEL-1000B Industrial Lifts for Personnel and Loads. These lifts are located within the New York Division at the Governor Mario M. Cuomo Bridge in Tarrytown, New York. The scope of work includes performing required service on a monthly, quarterly, and yearly basis to ensure operational safety and compliance. This solicitation, identified as IFB 26028, falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. Interested contracting firms must submit their responses by the deadline of November 30, 2026. The procurement is being managed by the New York State Thruway Authority Procurement Services.

New York State Thruway Authority - Procurement Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation W81C399362ETS is an invitation for bids issued by the Department of Defense for various commercial items to support the MCC Hood - ICO at White Sands Missile Range, New Mexico. The requirement includes a wide array of supplies such as lighting equipment, safety signage, hazardous waste labels, spill control materials, and general maintenance tools. This is a full and open competition under NAICS code 811310, with the award based on the lowest price technically acceptable quote. Bids must be submitted by April 10, 2012, and must remain valid for 30 calendar days. The successful offeror must be registered in the Central Contractor Registration database and provide free on board destination shipping to White Sands, NM. Delivery of all items is required within 30 days after receipt of the order, and partial shipments are prohibited unless authorized at the time of award. All proposals must be complete, and any substitutes for requested items must be clearly identified.

General Info

DoD solicitation for commercial supplies at White Sands, NM, based on lowest price.

Agency

Department Of Defense → W6QM Micc-White Sands

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

MICC - White Sands Missile Range Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street White Sands Missile Range NM 8, NM

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 6

Combined Synopsis

Response DeadlineApr 10

Deadline has passed

Submission Closed

04/10/2012, 05:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-White Sands

ContactsNo contacts available

OfficeWHITE SANDS MISSILE R, NM, 88002-5201, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-White Sands

Office AddressWHITE SANDS MISSILE R, NM, 88002-5201, USA

ContactsNo contact information available

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W81C399362ETS and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-57. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of 100.00 employees. This requirement is full and open and only qualified offerors may submit bids. The solicitation will start on the date this solicitation is posted and will end on 2012-04-10 11:00:00.0 Mountain Standard Time, FOB Destination shall be WSMR, NM 88001 The MCC Hood - ICO White Sands requires the following items, Meet or Exceed, to the following: 001, Cyalume 6"L Snapsticks,12 Hr.,Gre, 2, EA; 002, wobblwlight Jr. Work Light, 20-ft. Illumination R, 2, EA; 003, Wobblelight Metal Halide Work Light,400W,78, 2, EA; 004, Dewalt 3C LED Flashlight,141 Lumens, 10-1/4, 10, EA; 005, Loto Group Lock Box, EA, 1, EA; 006, Tight-Head 5_gal. Round Polyethylene Pail,Blue, 16, EA; 007, Used Oil labels, Vinyl,4"H X4"W, Pkg. of 100, 1, EA; 008, Petroleum Rotary Drum Pump with Telecoping, 2, EA; 009, Justrite Self-Closing Funnel,6"L Tube,Yellow, 2, EA; 010, Standard Drum Plug Wrench, EA, 1, EA; 011, Used Batteries Lables,vinyl,6"H X 6"W, 0, 1, EA; 012, Lab Safety Supply Hazardous Waste Accumul, 2, EA; 013, Bilingual Tri-View Safety Sign, "Fire Extingisher, 12, EA; 014, Drum ID Lables,Empty, Vinyl,6"H X 6"W, Pkg., 2, EA; 015, Brady Universal Waste Lable,3-7/8"X 3-7/8", 1, EA; 016, Danger Sign, "High Voltage", plastic 7"H X 10", 5, EA; 017, Danger Sign, "High Voltage",Self-Adhesvie, 7", 5, EA; 018, Caution Bilingual Sign, "Use Handrail",Plastic, 10, EA; 019, 2" Plastic Barrier Chain,100'LYellow,PK, 3, EA; 020, Danger Sign,"Do Not Enter, Authorized Person, 10, EA; 021, 1-1/2"dia. Blank Aluminum Tags,Green, Pkg, 5, EA; 022, Dremel Variable-Stroke Engraving Tool, EA, 2, EA; 023, Dremel Carbide Points for Variable-Stroke Eng, 2, EA; 024, Split Keyrings,1"I.D.,Pkg of 25, 25PK, 4, EA; 025, Mightyline removeable Striped Tapes,Yellow/BL, 2, EA; 026, Power Strip 6 Outlet Wiremound, 10, EA; 027, Earplug Dispenser Empty Without Cord, DP, 3, EA; 028, Earplug Howard Leight Mutimax without cord, 6, EA; 029, Complete MSDS Information Center,EA, 1, EA; 030, Replacement Windsock, 18" dia. X96"L EA, 2, EA; 031, Three-slot Heavy-Duty Cable Protection System, 7, EA; 032, Complete Bus AedPkg W/cabnt, EA, 1, EA; 033, Slim Tri-View Safety Sign, "AED...", Recycled PL, 1, EA; 034, XSORB Select Absorbent,EA, 5, EA; 035, Spilfyter Premium General-Purpose Lightweight, 2, EA; 036, Spilfyter Premium General-Purpose Meduim weight, 2, EA; 037, Spilfyter Premium General-Purpose Heavyweight, 2, EA; 038, Fuel Eilminator,15-gal. pail, EA, 4, EA; Partial submittal of required items will NOT be reviewed unless items are identified as "no longer available & no substitutes available". Substitutes must be identified. Once a proposal has been reviewed for completeness and has been accepted it will then be reviewed for Technical acceptance of each item. Award will be based on the overall Lowest Price Technically Acceptable quote. Questions concerning this buy must be submitted at least 1 day prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.