Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

42--MK11 TRAINING SUIT

Active
N0010414PFJ50Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Navsup Weapon Systems Support (WSS) plans to issue a firm fixed price purchase order to RFD Beaufort Inc. for 116 units of the MK11 Training Suit, NSN 3H-4220-LLCMC7895, Part Number A372700C00, with delivery terms FOB origin to Sharon Center, Ohio. The contract includes a provision allowing a 20% variation in quantity. This procurement is intended to be sole source due to the Government not owning or having economical access to the data or rights required to buy this part from other suppliers, and reverse engineering is determined to be uneconomical. While this notice of intent is not a solicitation for competitive quotes, the Government may consider interest or capability statements from other parties to potentially determine if competitive procurement is warranted. The Government has specified that acquisition policies under FAR Part 12 for commercial items are not being applied to this requirement; however, interested parties may notify the contracting officer of their ability to provide a commercial item within 15 days. Additionally, relevant Military and Federal Specifications, Qualified Products Lists, and other standardized documentation can be accessed via the DoD Single Stock Point (DODSSP) or online through ASSIST-Online. This contract action is managed by the Navsup Weapon Systems Support office located in Mechanicsburg, Pennsylvania, with all steps aimed at ensuring procurement of a specialized training suit required to meet Government needs.

General Info

Navsup awards firm fixed price order to RFD Beaufort for 116 MK11 Training Suits, sole source.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

315250 - Cut and Sew Apparel Manufacturing (except Contractors)

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
ContactsNo contacts available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Office AddressMECHANICSBURG, PA, 17050-0788, USA
ContactsNo contact information available

Full Description

Show more
NSN 3H-4220-LLCMC7895, TDP VER 001, QTY 116 EA, DELIVERY FOB ORIGIN, ISSUE TO RFD BEAUFORT INC, SHARON CENTER, OH 44274-0359. NAVSUP Weapon Systems Support (WSS) intends to issue a purchase order to RFD BEAUFORT INC for the procurement of 116 each, NSN: 3HD 4220 LLCMC7895,MK11 TRAINING SUIT, Part NumberA372700C00. Award will be made as a firm fixed price order with a +20% allowance for variation in quantity. This notice of intent is not a request for competitive quotes and the proposed/contract action is for supplies or services for which the Government intends to negotiate with only one sourece. Interested persons may identify their interest and capability to respond to the requirement or submit quotes. Quotes received prior to the award date will be considered by the Government.A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.The Government does not own the data or the rights to the data needed topurchase this part from additional sources. It has been determined to beuneconomical to buy the data or rights to the data. It is uneconomical toreverse engineer the part.Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://dodssp.daps.dla.mil. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at +1 (555) 000-0000 (DSN: 442-6396), or mail their request to DLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. -SEE NOTES 9, 26

Similar Contracts

Same NAICS industry code

NAICS: 315250
New
SLED
PURCHASE OF BAND UNIFORMS
Solicitation # 26/27-0011
The Fontana Unified School District is soliciting proposals under solicitation number 26/27-0011 for the design, manufacture, fitting, and delivery of replacement marching band uniforms for its five comprehensive high schools. The procurement aims to replace obsolete attire with durable, high-quality, commercial-grade materials designed for a service life of approximately ten years. The scope of work includes comprehensive services such as design consultation, the submission of renderings for District approval, sizing, and post-delivery support. The District may award contracts by individual school site, multiple sites, or as a whole. All products must be delivered F.O.B. Destination to the District Warehouse in Fontana, California, with a final delivery deadline of May 24, 2027, or within 130 calendar days of the purchase order. The award will be based on the low bidder, provided the vendor is responsive and responsible. Bidders must maintain firm unit pricing through June 30, 2027, and provide specific documentation for any proposed substitutions. Required submissions include signed certifications regarding non-collusion, lobbying, and the Iran Contracting Act, with a response deadline of November 6, 2026, via the electronic procurement portal. Successful vendors must comply with California safety regulations, provide required insurance, and submit a Drug-Free Workplace Certification and COVID-19 Attestation of Compliance. Additionally, vendors delivering to school sites must maintain Mandated Reporter Certification. Payment will be issued within thirty business days following the actual delivery of goods.
Purchasing Department

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 315250
New
DIBBS
Supply of Webbing Straps (Safety Restraint Tethers)This subcontract through C and T Supply Chain involves the procurement of 17 specialized safety restraint webbing straps for the Department of Defense. The supplier is responsible for manufacturing or sourcing straps that meet NSN 8465016203362 while ensuring strict adherence to the Berry Amendment and the Buy American Act. All deliverables must be shipped FOB Destination to Grand Ledge, Michigan. Technical requirements include packaging according to RP001 and marking in compliance with MIL-STD-129 and ASTM D3951 standards. Additionally, the contractor must maintain DFARS cybersecurity standards to ensure the security of the supply chain. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.
C AND T SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 315250
New
DIBBS
STRAP, WEBBING
Solicitation # SPE1C1-27-T-0054
Solicitation SPE1C1-27-T-0054 is a Request for Quotations issued by DLA Troop Support, C and T Supply Chain, for the procurement of webbing straps, specifically safety restraint tethers (NSN 8465016203362). The requirement consists of two line items: CLIN 0001 for 10 units and CLIN 0002 for 7 units. The original required delivery date is October 27, 2026, with a delivery window of 20 days after receipt of order. Delivery is specified as FOB Destination to the Michigan Army National Guard AASF 1 in Grand Ledge, Michigan. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials must meet TQ requirement IP025. Inspection and acceptance will occur at the origin. The procurement is not a small business set-aside and falls under NAICS code 315250. Key regulatory requirements include the Berry Amendment, Buy American Act, and DFARS cybersecurity standards for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.
C AND T SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 315250
New
DIBBS
Seat Fabric and Upholstery Material SupplyThis subcontract opportunity, managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, focuses on the supply of seat fabric and upholstery materials. The scope of work involves providing military-grade textiles, leather, synthetic fabrics, high-durability automotive fabrics, foams, and stitching threads to prime contractors. A critical requirement of the contract is the provision of material certifications to guarantee full compliance with all referenced technical drawings for the delivered rolls of fabric and foam inserts. The procurement is designated as a Total Small Business Set Aside under NAICS code 315250. Interested parties must adhere to the timeline established by the posting date of October 25, 2026, with a response deadline set for November 5, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 315250
New
SLED
Oviedo Recreation & Parks T Shirts
Solicitation # city-of-oviedo-RFQ-102226-II-2027
The City of Oviedo Recreation and Parks Department in Florida is seeking proposals for the annual production of Athletics and Summer Camp shirts. This solicitation, identified as city-of-oviedo-RFQ-102226-II-2027, outlines a requirement for a vendor to handle the recurring manufacturing of apparel used for the department's seasonal and athletic programs. Interested parties must submit their responses by the deadline of October 29, 2026, at 6:00 PM. Primary coordination for this project is managed by Jacqueta Scott, with Lloyd Coleman serving as the secondary point of contact. Detailed bidding information and submission portals are available through the MyVendorLink platform.
City Of Oviedo — Recreation & Parks

POSTED

7 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 315250
International
Vest, High Visibility, No Markings
Solicitation # 202605058/A
The Royal Canadian Mounted Police (RCMP) is soliciting bids for the manufacture and supply of high-visibility vests with no markings, conforming to the CSA Z96-22 Standard as a non-FR Class 2, Level 2 garment. The requirement consists of a firm quantity of 240 vests across four size configurations (S/M, L/XL, 2XL/3XL, and 4XL/5XL) and an optional quantity of approximately 795 vests that may be exercised within 36 months of the contract award. The contract will be awarded to the lowest priced responsive bid, with pricing evaluated in Canadian dollars on a Delivered Duty Paid (DDP) Destination basis. The procurement is strictly limited to Canadian goods, defined as those wholly manufactured or originated in Canada or meeting CUSMA Rules of Origin. Bidders must adhere to strict ethical and environmental standards, including the prohibition of child and forced labor, the provision of living wages, and compliance with Green Procurement policies regarding environmentally preferable packaging. Technical specifications require a five-point tear-away design with 5 cm wide silver heat transfer retroreflective markings and bilingual labeling in English and French. The RCMP reserves the right to perform destructive testing on up to 2 percent of deliveries to ensure conformity with the specified requirements.
Royal Canadian Mounted Police

POSTED

7 days ago

DEADLINE

in 15 days
View Details
NAICS: 315250
International
Supply of Army Branded Clothing
Solicitation # 0076
Unite Procurement UK Limited, acting for the Ministry of Defence, is seeking multiple suppliers to join the Unite Procurement Platform for the provision of standardised Army-branded clothing. The objective is to establish a professional and consistent identity for Arms and Services Engagement Teams during public-facing recruitment, travel, and outdoor activities. Each clothing package must include one quilted puffer jacket, one softshell jacket, one pair of stretch trousers, three moisture-wicking T-shirts, and three pairs of physical training shorts. The scope of work covers the manufacture, branding, packaging, and delivery of these packages as a one-off issue. The contract specifically excludes ongoing maintenance, repairs, laundering, or stock management. Interested suppliers should register their interest by contacting Unite Procurement UK Limited with details of their product range and capabilities. While there is an initial response deadline of November 2, 2026, the platform will continue to onboard suppliers on a rolling basis to maintain a competitive and flexible supply base.
UNITE PROCUREMENT UK LIMITED

POSTED

13 days ago

DEADLINE

in 4 days
View Details
NAICS: 315250
International
RFSO 21C31-254242- Royal blue Interlock fabric and collars
Solicitation # WS5667657556
The Department of Public Works and Government Services is seeking offers to establish a Regional Individual Standing Offer for the supply of royal blue interlock fabric and collars to CORCAN-Correctional Service of Canada. These materials will be used for the production of inmate polo shirts, with orders issued on an as-needed basis. This opportunity is restricted to Canadian suppliers and suppliers of an Applicable Trading Partner, with performance taking place in Drummondville. The initial term of the agreement is for one year, with the potential for three additional one-year extensions. Interested parties must submit their responses by November 17, 2026, as late submissions will not be accepted. The solicitation is managed by the Government of Canada under solicitation number WS5667657556.
Department of Public Works and Government Services

POSTED

13 days ago

DEADLINE

in 19 days
View Details
NAICS: 315250
DIBBS
TROUSERS, MEN'S
Solicitation # SPE1C1-26-R-0089
Solicitation SPE1C1-26-R-0089 is a 100% Small Business Set-Aside for an IDIQ Firm Fixed Price contract issued by the DLA Troop Support C and T Supply Chain. The procurement is for Marine Corps men's dress and service trousers, specifically MC Green and MC Blue variants, conforming to MIL-DTL-32747. The contract includes a five-year ordering period with a total estimated quantity of 137,790 units for the blue trousers, distributed across five pricing tiers. Key technical requirements include the use of polyester/wool gabardine, adherence to specific shade evaluations via the DLA Product Testing Center, and the submission of pre-production samples for government approval. Award will be determined using Best Value Trade-off Source Selection Evaluation Procedures, prioritizing Product Demonstration Models (PDMs), followed by past performance assessed through the Supplier Performance Risk System (SPRS), and finally price. Proposals must be submitted via DIBBS in two separate volumes, with physical PDMs shipped via traceable carrier. Delivery terms are FOB Destination for tariff sizes and FOB Origin for special measurements, with the primary ship-to destination being the Travis Association for the Blind in Austin, Texas. Contractors must comply with the Berry Amendment and Buy American Act, utilize WAWF-RA for electronic invoicing, and adhere to strict RFID tagging and labeling standards.
C AND T SUPPLY CHAIN

POSTED

16 days ago

DEADLINE

in 14 days
View Details
NAICS: 315250
Federal
USPP - 18225 - USPP Requirement for Dress Blouses and Uniform Items Not Available on the NPS Uniform ContractThe Department of the Interior is forecasting a requirement for the US Park Police to procure dress blouses and various uniform items that are currently unavailable through the existing NPS Uniform Contract. This procurement is categorized under NAICS code 315250 and is intended to fill specific clothing gaps within the agency's uniform inventory. The forecast was posted on September 2, 2026, and is managed by the National Park Service. Interested parties can coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this requirement.

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 315250
Federal
USPP - 17035 - Body Worn Cameras Generation 4 with Accessories, Licenses, and Data Storage for the US Park PoliceThe Department of the Interior is seeking a provider for the US Park Police Body Worn Camera program. This requirement involves the procurement of annual licenses and data storage fees to maintain current operations, as well as the purchase of Axon Body 4 cameras and necessary accessories, such as docking stations and molly mounts, to equip new hires in fiscal year 2027. This opportunity is listed as a forecast under NAICS code 315250. Interested parties can coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this acquisition.

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 315250
Federal
USPP - 17557 - USPP Requirement to Purchase and Install PIT Equipment on LE VehiclesThe Department of the Interior is seeking a Blanket Purchase Agreement for the US Park Police to acquire and install Precision Immobilization Technique equipment on its law enforcement vehicles. This contract is structured with a base year and subsequent option years, focusing on enhancing the ability of officers to perform successful PIT maneuvers while minimizing damage to the police fleet. The requirement is categorized under NAICS code 315250 and was posted as a forecast on September 2, 2026. Interested parties may coordinate with Jeffrey Schneider or the Contract Support Center for further details regarding this procurement.

POSTED

about 2 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 326199
New
Federal
QPL-Qualified O-Ring SupplyThis subcontract involves the supply of high-performance O-rings for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The primary requirement is the procurement of O-rings exclusively from Qualified Products List manufacturers, with a mandatory certification of qualification according to MIL-PRF-25732E standards. The opportunity is categorized under NAICS code 326199 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.
All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332722
New
Federal
Specialized Fastener Supply (Hex Cap Screws)This subcontract involves the procurement and delivery of military-grade Type I Hex Cap screws for prime contractors supporting Navsup Weapon Systems Support Mech projects. All supplied fasteners must be manufactured in strict accordance with MIL-DTL-1222 specifications to meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 423510
New
Federal
Nickel-Aluminum-Bronze Material SupplyThis subcontract involves the supply of raw Nickel-Aluminum-Bronze material to prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The supplier is responsible for delivering raw stock that strictly adheres to ASTM B150/B150M chemical and physical property standards. A critical requirement of the contract is the provision of certified mill certifications to verify the material composition and origin, with a specific mandate that all supplied material must be certified mercury-free. The opportunity is categorized under NAICS code 423510, with a response deadline set for November 27, 2026.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332710
New
Federal
Gland Actuator Fabrication and AssemblyThis subcontract involves the precision machining and assembly of three Gland Actuators for Navy submarine projects under the Navsup Weapon Systems Support Mech. The scope of work includes machining components according to technical drawings, executing First Article Testing and Inspection, and performing NDT liquid penetrant inspection within a mercury-free environment. To be eligible, contractors must hold ISO 9001 or MIL-I-45208 certification and ensure full compliance with MIL-STD-130 and MIL-STD-973 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 27, 2026, falling under NAICS code 332710 for the Department of Defense.
Machine Shops

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332510
New
Federal
Precision Bearing Supply for Valve AssemblyThis subcontract involves the supply of high-precision ball or roller bearings for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg valve restoration projects. The provider must deliver certified bearings that meet the exact technical specifications for NIIN 015505005, ensuring all components are suitable for valve assembly under NAICS code 332510. A critical requirement of the agreement is strict adherence to the Buy American and Trade Agreements Act, necessitating that all delivered products originate from qualifying countries. The contract was posted on October 28, 2026, with a response deadline of November 2, 2026, for the Department of Defense.
Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 811210
New
Federal
Valve Assembly Repair and OverhaulThis subcontract involves the technical repair and restoration of a Valve Assembly (NIIN: 015505005) to support prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the disassembly, inspection, and refurbishment of internal components to ensure they meet original specifications. To guarantee functional compliance, the contractor must perform pressure testing and apply IUID data matrix marking in accordance with DFARS 252.211-7003. The final deliverable is one fully repaired and certified Valve Assembly with completed IUID registration. This project falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541380
New
Federal
Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
Federal
Manufacturing of Tailpiece, Union (NSN 4730-01-651-0817)This subcontract involves the manufacture of 35 Tailpiece, Union units (NSN 4730-01-651-0817) for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires precision machining and fabrication utilizing CNC equipment in strict accordance with Technical Data Package Version 002. The project is governed by NAICS code 332710 and falls under the jurisdiction of the Department of Defense. Critical compliance requirements include adherence to Special Emphasis Level I quality control, the Buy American Act, and DPAS DO ratings. All finished units must be packaged and marked according to MIL-STD-2073 and MIL-STD-129 standards, respectively. Final delivery is designated as FOB Destination to Portsmouth NSY.
Machine Shops

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
Federal
Specialized Material Supply for Valve FabricationThis subcontract, titled Specialized Material Supply for Valve Fabrication, involves the procurement and delivery of raw metals and specialized alloys for prime contractors working on Department of the Navy valve fabrication projects. The supplier is responsible for sourcing materials that strictly adhere to design reference 21321-001 specifications and delivering these certified materials directly to the manufacturer. To ensure full compliance with government standards and DFARS 252.225-7036 Buy American Act requirements, the provider must supply all necessary Mill Test Reports and Material Safety Data Sheets. Managed under the Department of Defense via Navsup Weapon Systems Support Mech, the opportunity is categorized under NAICS code 332999, with a response deadline set for November 12, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
Federal
Manufacture of Linear Direct ValvesThis subcontract involves the manufacture of five Linear Direct Valves for prime contractors working on Department of the Navy projects. The scope of work includes the fabrication of valve bodies and internal components utilizing precision CNC machining to ensure strict adherence to design reference 21321-001 and Cage Code 78062 specifications. Additionally, the contractor is responsible for applying Item Unique Identification to all parent items and subassemblies. The project is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. Compliance with DFARS 252.225-7036 Buy American standards is mandatory for the delivery of the units, which are identified by NIIN 014108012. The contract falls under NAICS code 332911.
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333515
New
Federal
Supply of Self-Locking Nuts (NASM 17828-6C)This subcontract with the Department of Defense, specifically for the Navsup Weapon Systems Support Mech, requires the procurement of 368 self-locking nuts. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5310-01-540-9579 and Part Number NASM 17828-6C according to TDP Version 006. The agreement mandates strict quality and logistical standards, including permanent traceability markings per MIL-STD-792 and packaging compliant with MIL-STD-2073. Additionally, the provider must submit IUID reporting through WAWF and furnish certificates of compliance for all Special Emphasis Material.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335999
New
Federal
Custom Cable Assembly FabricationThis subcontract involves the custom fabrication of five cable assemblies for prime contractors supporting Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing the assemblies according to Sippican Drawing D248895-1 Rev F and DGO Drawing 1155130-114, which includes performing all necessary electrical and mechanical testing to ensure operational integrity. To qualify, the provider must maintain ISO 9001 certification and ensure full compliance with Buy American requirements. All deliverables must adhere to MIL-STD-129 P and MIL-STD-130 N marking standards. The opportunity is categorized under NAICS code 335999, with a response deadline set for November 2, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 315250
Closed
Federal
83--Market investigation to identify garment cut and sew manufacturers experienced in manufacturing the current Army Combat Uniform (ACU) with interest in participating in a permethrin treated fabric cut and sew trial.
Solicitation # ACUPERSTUD
W6QK Acc-Apg Natick

POSTED

almost 14 years ago

CLOSED

over 13 years ago
View Details
NAICS: 315250
Federal
84--Request for Information (RFI) Capacitive Touch Screen Compatible Glove
Solicitation # CAPACITIVEGLOVEREQUESTFORINFO
W6QK Acc-Apg Natick

POSTED

over 14 years ago

DEADLINE

N/A
View Details
NAICS: 315250
Federal
83--Temperature Adaptive Insulation for clothing items.
Solicitation # W58P05SOF001
W6QK Acc-Apg Natick

POSTED

almost 15 years ago

DEADLINE

N/A
View Details
NAICS: 315250
Awarded
Federal
84--AIRMAN BATTLE UNIFORM COAT, TROUSERS, HAT
Solicitation # F1D0261129G001
Navsup Flt Logistics Ctr Norfolk

POSTED

about 15 years ago

CLOSED

about 15 years ago
View Details
NAICS: 315250
Awarded
Federal
84--NON-FR-Fuel Handler's Coverall
Solicitation # W91231-2011-4191
W6QK Acc-Apg Natick

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 315250
Closed
Federal
B--Flame Resistant Undergarments - Request for Information
Solicitation # W911QY-UNFR-001
W6QK Acc-Apg Natick

POSTED

almost 16 years ago

CLOSED

over 15 years ago
View Details
NAICS: 315250
Awarded
Federal
99--1850's Era Dragoon Soldier Uniform
Solicitation # W800A89219T008
W6QM Micc-Ft Riley

POSTED

about 17 years ago

CLOSED

about 17 years ago
View Details
NAICS: 315250
Closed
Federal
84--Advanced Combat Shirt UCP Type 1 (ACS) Adding; Amendment 0003
Solicitation # W911QY09R0024
W6QK Acc-Apg Natick

POSTED

about 17 years ago

CLOSED

about 17 years ago
View Details
NAICS: 315250
Federal
84--Marine Corps Physical Training Running Suit
Solicitation # M6785409R3029
Commander

POSTED

about 17 years ago

DEADLINE

in almost 73 years
View Details
NAICS: 315250
Closed
Federal
84--Chemical/Biological Protective Clothing
Solicitation # W911QY09RCBPC
W6QK Acc-Apg Natick

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 315250
Awarded
Federal
84--JERSEY AND CAPS
Solicitation # W45C3C-8099-001
W6QM Micc-Ft Bliss

POSTED

over 18 years ago

CLOSED

over 18 years ago
View Details
NAICS: 315250
Federal
Protective Clothing Questions and Answers
Solicitation # DOE-SNOTE-080220-001

POSTED

over 18 years ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS