51--Jobber drill bits, aviation application; (6) types; 50,000 each type;

This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR 13.5 Test Program for Commercial Items, FAR 12.6 Streamlined Procedures for Evaluation and Solicitation for Commercial Items. This announcement constitutes the only solicitation; a Request for Quotation (RFQ) is being requested and a written solicitation will not be issued. The Solicitation number is N00244-07-T-0618. The RFQ and incorporated provisions and clauses are those in effect through FAR FAC 2005-17, class deviation 2005-o0001 and DFARS-DCN 20070531. This solicitation is issued as unrestricted. NAICS Code 423840 is applicable and business size is 100 employees. The following material is required: SECTION A:********************************************************************************* Line Item 0001: #10 1935 TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71724; Quantity: 50,000 each; Line Item 0002: #20, 1610, TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42 COBALT, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71725; Quantity: 50,000 each; Line Item 0003: #30, 1285, TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71726; Quantity: 50,000 each; Line Item 0004: #40, 0980, TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71727; Quantity: 50,000 each; Line Item 0005: 1/8", 1250 TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71728; Quantity: 50,000 each; Line Item 0006: 1/4" .2500 TYPE "J" COBALT JOBBER DRILLS; NAS 907, 135 DEGREE, SPLIT POINT, M42, AVIATION APPLICATION, DOMESTIC; LSN: 5133-LLLP71729; Quantity: 50,000 each; Government Delivery Requirements: The Government requires all material to be delivered within thirty days (30) after receipt of an order in accordance with FAR 52.211-8. If the Contractor takes exception to the RDD and cannot deliver all material under one shipment the Contractor shall provide an accurate and realistic delivery schedule based on current information. The Government prefers FOB Destination and offers quoting FOB Origin are to provide an accurate and realistic estimate for total transportation charges. Inspection and acceptance will be made at Destination by the Government. Delivery will be made to the Fleet Readiness Center-SW, San Diego, CA 92135. Any technical questions are to be directed to: Ralph A. Franchi Contract Negotiator, US Navy, FISCSD, Code 240, +1 (555) 000-0000, contact@example.gov TECHNICAL QUESTIONS ARE TO BE SUBMITTED VIA EMAIL THE FOLLOWING PROVISIONS AND CLAUSES ARE APPLICABLE AND ARE HEREBY INCORPORATED INTO THE SOLICITATION BY REFERENCE AND BY FULL TEXT. THE FULL TEXT OF THE CLAUSES/PROVISIONS FROM THE FAR AND DFARS CAN BE ACCESSED VIA THE INTERNET USING THE FOLLOWING WEB-SITE ADDRESS: www.arnet.gov or http://farsite.hill.af.mil It is the responsibility of the offerors to obtain copies of the necessary provisions and or clauses that are required as a part of this solicitation. Required clauses/provisions that are not submitted may render an offer not to be accepted by the Government. SECTION B:********************************************************************************** FAR 52.212-1, Instructions to Offerors Commercial Items NOTE: This provision must be reviewed completely. It contains the guidelines for submission of your quotation. Addendum to FAR 52.212-1: FAR 52.215-5 Facsimile Proposals, (c) Fax: +1 (555) 000-0000 SECTION C:****************************************************************************** FAR 52.212-2 Evaluation of Commercial Items; (a) The Government will award a Firm Fixed Price purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous and considered the - Best Value to the Government, price and other factors considered. The following factors shall be used to evaluate the quotation: (i) Capability of the contractor to provide the required material. To be determined technically acceptable, the contractor must furnish information, descriptive literature that provides pertinent information to the products being offered. Data must be submitted in accordance with FAR 52.212-1(b)(4). Provide information in an electronic (pdf preferred) if possible. Contractors meeting factor one will have their quotation further evaluated under factors ii and iii. (ii) Past Performance: Provide Past Performance data on your companies two most recently completed Federal Government contracts (Not to exceed (3) years since completion) for like or similar material required by this solicitation. If you do not have Federal Government contracts, list State, Local or commercial contracts. Provide contract number, date of contract, quantity, unit price and the name of Government activity or commercial company, point of contact/phone number. This performance data will be used to evaluate your companies past performance in meeting contract cost/price, technical and delivery objectives. See File Attachment for Past Performance Data Sheet. (iii) Pricing: Contractors must provide a unit current pricing for the CLIN specified and a total cost for each line item under this solicitation. Pricing will be evaluated against other quotations received. (iv) Delivery Schedule: Contractors are required to provide an accurate, realistic delivery schedule and a final delivery date based on current information. All factors listed will be evaluated. Factor (i) Technical is rated the highest and if contractor's offers meet this factor the other factors will be evaluated. The Contracting Officer's award decision will be made based on the ability of a contractor to meet the evaluation criteria set forth in this RFQ. Past Performance: If a contractor does not have past performance experience a neutral rating will be assigned. Quotations which take exception and do not meet the Government's requirement may be determined to be unacceptable and not considered for award. At the discretion of the Contracting Officer, the Government intends to evaluate quotations without discussions and award a Firm Fixed Price purchase order. Each initial offer should, therefore contain the contractors best terms from technical, delivery and pricing standpoint. The Government reserves the right to make award to other than low offeror when it has been determined by the Contracting Officer to be in the best interest of the Government. SECTION D:********************************************************************************* FAR 52.212-3, Offeror Representation and Certifications-Commercial Items-ALT I-OCT 1998; Incorporated by reference; NOTE: This provision is considered a - fill-in. All applicable fields must be completed. Submit this provision with your quotation. See NECO for attachment. SECTION E:********************************************************************************* FAR 52.212-4 Contract Terms and Conditions Commercial Items; Addendum to FAR 52.212-4 is hereby incorporated by reference or full text as applicable: FAR 52.247-34 FOB Destination; FISC-SD local clauses: 331 Review of Agency Protests (MAR 2000); 332 Unit Prices (OCT 2001); 333 Non US Navy Owned Cranes Aug 2004; 52.204-7 Central Contractor Registration (Oct 2003); 52.204-7 Central Contract Registration Oct 2003; 52.204-8 Annual Representations and Certifications Jan 2006; SECTION F:********************************************************************************** FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) applies with following applicable clauses for paragraph (b): FAR 52.219-4 Restrictions on Subcontractor Sales to the Government; FAR 52.219-8 Utilization of Small Business Concerns; FAR 52.222-21 Prohibition on Segregated Facilities, FAR 52.222-26 Equal Opportunity, FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, FAR 52.222-36 Affirmative Action for Handicapped Workers, FAR 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, 52.232-22 Payment by Electronic Funds Transfer-Central Contractor Registration; DFARS 252.225-7007 Buy American Act, Trade Agreements, Balance of Payments Program; DFARS 252.225-7036 Buy American Act, North American Free Trade Agreement Implementation Act, Balance of Payments Program; 52.204-7 Central Contract Registration; 52.204-8 Annual Representations and Ce! rtifications, Jan 2006; DFARS 252.212-7001 Contract Terms and conditions required to implement statutes or executive orders applicable to defense acquisitions of commercial items-JAN 1999, 252.204-7004 Required Central Contractor Registration; DFARS +1 (555) 000-0000 Trade Agreements-Balance of Payments Program, DFARS 252.225-7012 Preference for Certain Domestic Commodities, DFARS 252.247-7024 Notification of Transportation of Supplies by Sea; +1 (555) 000-0000 Electronic submission of payment requests Jan 2004; 252.225-7014 Preference for domestic specialty metals Jun 2005; End of Clauses/Provisions. IMPORTANT NOTICE: DFARS 252.204-7004 - Central Contractor Registration (CCR) is required and applies to all solicitations issued on/after 6-1-98. Lack of registration in the CCR database will make an offeror/quoter ineligible for award of a contract/purchase order. Please ensure compliance with this regulation when submitting your quote. Utilize the CCR website at http://www.ccr.gov and/or call the CCR Assistance Center at +1 (555) 000-0000 for more information. Requests for technical and or contractual clarification are to be submitted to the Contracting Officer via email. Quotation information may be submitted electronically via e-mail, by separate computer disk in MS Word (latest version) or by fax. Submit responses to: Fleet and Industrial Supply Center, Regional Contracts Dept., 937 N. Harbor Dr., Ste. 60, San Diego, CA 92132-0060 Attn: Ralph Franchi, Code 240, +1 (555) 000-0000, +1 (555) 000-0000 fax. contact@example.gov Reference solicitation number: N00244-07-T-0618 on all documents and requests for information. Quotes must be received no later than COB 1600 p.m. (PST) on July 2, 2007 .