52000PQ240006947 USCGC BARRACUDA HULL CLEANING

STATEMENT OF WORK CGC BARRACUDA HULL CLEANING CGC BARRACUDA 601 Startare Drive Eureka, CA 95501 CONTENTS Introduction Scope of Work Period of Performance Deliverables Acceptance Criteria Quality Assurance Contracting Officer's Technical Representative (COTR) Notes INTRODUCTION The U.S. Coast Guard cutter BARRACUDA WLB-87301 requires annual hull cleaning due to a buildup of seagrowth by State Certified divers SCOPE OF WORK- The work is to be accomplished through the following task. Service provider shall provide a certified commercial diver to remove seagrowth from the hull of the ship. Service providers are highly encouraged to engage the vessels Engineer Petty Officer to fully understand the nature of services being requested so the most accurate service quote may be provided. PERIOD OF PERFORMANCE The vendor shall provide service located on the vessel, located at 601 Startare Drive Eureka CA 95501, with a start date of 1st September 2024 and a completion date 30th September 2024. Once the vendor is in receipt of authorization and prepared for conducting services, the period of performance is not to exceed 03 days after contract award date. DELIVERABLES The Vendor shall provide all equipment, parts, and labor costs. The Unit shall schedule a service date and be available to receive contracted services. ACCEPTANCE CRITERIA The government reserves the right to witness the installation process. The service provider shall keep the Contracting Officer's Technical Representative (COTR), MKC Jacob Schlereth, fully informed of servicing plans so that the COTR may arrange to be present when work is being performed. When the work is complete and ready for final inspection, the vendor shall notify the COTR to schedule final acceptance and observe service results. QUALITY ASSURANCE The contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure that services are performed in accordance with the terms of this Statement of Work (SOW) and in accordance with manufacturer's guidance and procedures. The QCP is the means which the vendor assures all work complies with the terms of awarded contract. It identifies, prevents, and ensures non-occurrence of defective services. CONTRACTING OFFICER'S TECHNICAL REPRESENTATIVE (COTR) The Contracting Officer (KO) shall designate a government employee, Contracting Officer's Technical Representative (COTR), to administer the technical aspect of this contract. The individual shall have authority to provide technical direction to the contractor as long as that direction is within the scope of the contract. The COTR shall NOT have authority to change the terms and conditions of the contract. The COTR does NOT have authority to legally bind the government beyond the terms and conditions of the contract. The Contracting Officer's Technical Representative (COTR) designated for this effort and authorized to perform inspection and acceptance on behalf of the USCG is: MKC Jacob Schlereth NOTES If damages should occur, items shall be repaired at no cost to the government prior to final acceptance of the work. All Government Furnished Information, work products, and removed equipment shall remain the property of the U.S. Coast Guard, shall not be released to any third party or published without prior approval from the COTR. All associated HAZMAT shall be handled safely and disposed of properly IAW state and federal law.