Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Award Notice opportunity from Department Of Defense was posted on February 29, 2008. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

53--Dual Wheel Heavy Duty Casters

Awarded
W911RQ08T0052Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510
New
DIBBS
Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Machine Bolts (NSN 5306991144430)This subcontract involves the supply of 38 units of machine bolts, identified by NSN 5306991144430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet specific material specifications and adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. Additionally, the contractor is required to comply with all DPAS rating requirements to ensure prioritized delivery. The completed order is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Mounting Bracket Fabrication (NSN 5340-01-386784-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and supply of 28 mounting brackets identified as NSN 5340-01-386784-1. The project involves utilizing casting and forging processes with specialized tooling to produce units that meet Critical Application Item quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside. A critical requirement for the contractor is strict compliance with NIST SP 800-171 standards to ensure the proper safeguarding of covered defense information. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Supply of Butt Hinges (NSN 5340-01-710-4966)This subcontract involves the supply of 8 units of butt hinges, part number 148T8221U7, to support prime contractors under DLA supply contracts. The parts must be sourced according to Boeing specifications and undergo sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain SAE AS9100 quality standards and possess FAA Airworthiness Approval. The final delivery of the marked and packaged units is designated as FOB Origin, with the destination being DLA Distribution DDSP New Cumberland. This procurement is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 332510
New
DIBBS
Needle Roller Bearing SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the delivery of 20 specialized needle roller bearings, identified by NSN 3110-01-248-7841. The bearings must be manufactured in the United States, its outlying areas, or Canada to comply with specific restrictions on the acquisition of ball and roller bearings. All components must adhere to the technical and test requirements outlined in the associated technical drawings. The contractor is required to maintain compliance with CMMC Level 2 and CDI requirements. This procurement falls under NAICS code 332510 and supports prime contractors fulfilling DLA supply contracts. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Supply of Solid Rivets (NSN 5320-01-057-3176)This subcontract involves the supply of 4,290 solid rivets conforming to NSN 5320-01-057-3176 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The project requires strict adherence to MIL-STD-129 for all packaging and marking, with logistics managed via First Destination Transportation. Performance will take place at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510. Interested parties must respond by November 13, 2026, to fulfill the requirements of the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 332510
New
DIBBS
Access Door Hinge SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of 14 specialized access door hinges identified by NSN 5340-01-485-6825. The contractor is responsible for manufacturing or sourcing these components, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All deliverables must be packaged according to ASTM D3951 standards for non-hazardous materials and palletized following RP001 guidelines. The place of performance for this contract is located in Cherry Point, and the procurement falls under NAICS code 332510.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Show more

Red River Army Depot is seeking quotes for an urgent requirement of heavy duty dual wheel casters under solicitation W911RQ08T0052. The request includes 58 rigid casters and 68 swivel casters, both featuring a 10,000 lbs capacity, 16 inch dual wheels with soft shoe tires, and a kingpinless design with a 1 inch thick heat treated steel mounting plate. These items must meet specific technical dimensions and are identified by Albion Industries part numbers 750SN16809R004 and 750SN16809S003 or their equivalents. This procurement is a total small business set-aside under NAICS code 332510. All orders will be DO rated for national defense use per the Defense Priorities and Allocations System. Delivery is required by April 18, 2008, FOB Destination to Texarkana, Texas. The bid closing date is February 26, 2008, at 5:00 PM Central Time.

General Info

Agency

Department Of Defense → W6QK Acc Rrad

Contract Value

$147,415

NAICS

332510 - Hardware Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Awardee

CASTER CONCEPTS INC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Notice updated

The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Rrad
ContactsNo contacts available
OfficeTEXARKANA, TX, 75507-5000, USA
Organization / AgencyDepartment Of Defense → W6QK Acc Rrad
Office AddressTEXARKANA, TX, 75507-5000, USA
ContactsNo contact information available

Full Description

Show more
Red River Army Depot has an urgent requirement for heavy duty dual wheel casters described as follows: (1) Minimum Requirements: 16 IN Dual Wheel, Rigid, 10,000 Lbs Capacity, Monarch Type Soft Shoe Tires, Hub Assembly OD 3 Inches Nominal, Two Piece a ll Welded Lock Ring Assembly,Tapered Bearings with Seals, Kingpinless Design Caster, Castle Nuts on each Axle End, Face Brake, 1 IN Thick 1045 Heat Treated Steel Mounting Plate with 7 IN X 7 IN Bolt Pattern, Oscillating Axle will Pivot Approximately 5 Degr ees Up or Down, Overall Height Range 19 3/4 IN to 20 IN, Albion Industries P/N 750SN16809R004 or equal: QTY: 58 Each (2) Minimum Requirements: 16 IN Dual Wheel, Swivel with 11 IN Diameter Precision Machined Load Raceway with Tapered and Thrust Bearings, Mo narch Type Soft Shoe Wheels, 10,000 Lbs Capacity, Hub Assembly OD 3 Inches Nominal, Two Piece All Welded Lock Ring Whel Assembly, Tapered Bearings with Seals, Kingpinless Design Caster, Castle Nuts on each Axle End, 1 IN Thick 1045 Heat Treated Steel Mount ing Plate with 7 IN X 7 IN Bolt Pattern, Oscillating Axle will Pivot Approximately 5 Degrees Up or Down, Overall Height Range 19 3/4 IN to 20 IN; Albion Industries P/N 750SN16809S003 or equal; QTY: 68 Each. Required delivery for both line items is 18 Apri l 2008. Deliveries on all line items may be accelerated at the contractors discretion. Delivery is FOB Destination, Red River Army Depot, Texarkana, TX 75507-5000. This is a total small business set-aside. The NAICS Code is 332510. The standard size is 500 employees. Any contract awarded as a result of this solicitation will be a DO rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. Request for quote W911RQ08T0052 will issue on or about 15 Feb 2008 and will be available on Fedbizopps and the Red River Army Depot website: https://www.redriver.army.mil. Address all questions and comments in writing to pe contact@example.gov. The bid closing date is 26 Feb, 2008, 5:00 PM Central Time.

More opportunities from Department Of Defense → W6QK Acc Rrad

Same awarding agency

NAICS: 541611
Federal
Executive Compensation and Subcontract ReportingThis contract requires compliance with FAR 52.204-10, mandating the reporting of executive compensation and first-tier subcontract awards for any contract valued over $30 million. The obligation applies to all first-tier subcontractors and necessitates accurate, timely submission of detailed compensation data for top executives as well as information on all subcontracts awarded above the designated threshold. The work is classified under NAICS code 541611, indicating it pertains to management consulting services, and is administered by the Department of Defense under the office W6QK Acc Rrad, with performance located in Texarkana. The contract’s posting date is May 7, 2026, and it is designated as a subcontract, requiring strict adherence to federal transparency regulations to ensure public accountability and regulatory compliance.
Administrative Management and General Management Consulting Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation and maintenance of NIST SP 800-171 security controls to safeguard covered defense information in accordance with DFARS 252.204-7012. This obligation applies to all systems and processes handling such information, ensuring alignment with federal cybersecurity standards for defense contractors. The work must be performed in Texarkana and falls under NAICS code 541512, indicating it is related to custom computer programming services. The contract is classified as a subcontract and is administered by the Department of Defense under the agency name W6QK Acc Rrad. Compliance with these controls is mandatory and non-negotiable, with failure to meet requirements potentially resulting in contract penalties or termination. The solicitation was posted on May 7, 2026, and all activities must be executed to meet the full scope of the cybersecurity mandate without reliance on external documentation or interpretations.
Computer Systems Design Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 333318
Federal
Chemical Debinding Machine Supply – Markforged Wash-1The contract involves the supply of a Markforged Wash-1 chemical debinding machine designed for post-processing metal 3D printed parts, facilitating the removal of binder materials after additive manufacturing. This equipment is critical for enabling efficient, safe, and consistent debinding operations in a manufacturing environment that relies on metal additive technologies. The machine will support the Department of Defense’s production and maintenance capabilities within the Texarkana performance location, enhancing workflow automation and part quality for defense-related applications. The contract is classified as a subcontract under NAICS code 333318, which corresponds to industrial machinery manufacturing, indicating its role in supporting advanced production infrastructure. Although the solicitation number and specific contracting office details are not provided, the posting date of May 7, 2026, suggests this is a forward-looking procurement. There is no set-aside designation specified, and the organization responsible is tied to W6QK Acc Rrad, operating under the Department of Defense. The absence of point-of-contact or full address details implies this information may be restricted or pending release, consistent with certain defense-related procurement protocols.
Other Commercial and Service Industry Machinery Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 333332
Federal
Industrial 3D Printer Supply – Vector Spartan III or EquivalentThe contract entails the supply of a commercial off-the-shelf industrial 3D printer, specifically the Vector Spartan III or an equivalent model, intended for defense or industrial applications. The equipment must meet the technical and performance standards required for high-reliability environments, ensuring compatibility with mission-critical workflows under demanding operational conditions. The procurement is structured as a subcontract under the Department of Defense, with the agency designation W6QK Acc Rrad, and the place of performance is designated as Texarkana. The North American Industry Classification System code 333332 identifies the primary sector as industrial machinery manufacturing, underscoring the specialized nature of the hardware being procured. The solicitation was posted on May 7, 2026, and while no set-aside designation or specific sourcing restrictions are noted, the contract does not include detailed point of contact information or complete geographic details beyond the city of performance. The equipment must be readily available as a commercial product with proven field performance and without requirement for custom modifications, emphasizing efficiency and rapid deployment. The contract supports broader defense industrial base objectives by securing advanced additive manufacturing capabilities for in-house prototyping, tooling, or spare parts production within regulated operational settings.

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 332111
Federal
Manufacture and supply of T-142 Track Shoe Block
Solicitation # PANDTA26P0000_033811
The Red River Army Depot Rubber Products requires the manufacture and supply of T-142 Track Shoe Blocks, part number 11645128 Rev C, for fiscal year 2026. The total estimated quantity for the year is 24,000 units, with a specific delivery schedule beginning November 2nd and continuing through May 2nd. All products must be manufactured according to drawing 11645128 Rev C, adhere to Quality Assurance Requirement 11645128, and be accompanied by a Certificate of Conformance. This presolicitation, identified by solicitation number PANDTA26P0000_033811, is designated as a Total Small Business Set-Aside under NAICS code 332111. The contract is managed by the Department of Defense through the W6QK Acc Rrad office located in Texarkana, Texas, where the performance of the contract will also take place. Early delivery of the shoe blocks is permitted provided there is no additional cost to the government.
Iron and Steel Forging

POSTED

7 months ago

DEADLINE

in over 2 years
View Details
NAICS: 541330
Federal
Certificate of Conformance (CoC) Preparation and SubmissionThis subcontract, issued by the Department of Defense agency W6QK Acc Rrad, requires the preparation and submission of Certificates of Conformance for every delivery batch of Pad Plate Assemblies. All documentation must strictly adhere to the quality and compliance standards set forth in FAR 52.246-15 and DoD-STD-00100D. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, with the place of performance located in Texarkana, Texas. The contract was posted on April 6, 2026, and focuses on ensuring rigorous certification and quality assurance for the specified assemblies.
Engineering Services

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 493130
Federal
Packaging, Marking, and Shipping Services for Pad Plate AssembliesThis subcontract, issued by the Department of Defense under the W6QK Acc Rrad agency, involves specialized packaging, marking, and shipping services for finished Pad Plate Assemblies. The scope of work requires the contractor to provide MIL-STD-129 labeling, IUID marking verification, and FOB Destination shipping coordination. All materials must be handled using ALSC-approved dunnage and packaging that complies with ISPM 15 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 493130 and will be performed in Texarkana, Texas. Posted on April 6, 2026, the contract ensures that critical defense components are properly secured and documented for transport according to strict military and international shipping regulations.
Farm Product Warehousing and Storage

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 331110
Federal
Supply of Raw Materials and Components for Pad Plate AssembliesThis subcontract, issued by the Department of Defense through W6QK Acc Rrad, involves the supply of military-specification raw steel and component materials necessary for the fabrication of Pad Plate Assemblies. The contractor is required to ensure full traceability and strict compliance with MIL-DTL and ASTM standards to meet rigorous military requirements. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 331110. Performance for this contract will take place in Texarkana, Texas, with the solicitation posted on April 6, 2026.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
Manufacture of Pad Plate Assemblies (T-161)This subcontract, issued by the Department of Defense agency W6QK Acc Rrad, requires the precision manufacturing of 72,000 Pad Plate Assemblies annually. The production must strictly adhere to TACOM Drawing 12496786 Rev A, MIL-STD-130 for IUID marking, and DoD-STD-00100D quality standards. The work is designated for performance in Texarkana, Texas. The opportunity is classified as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332999. Posted on April 6, 2026, this contract focuses on high-volume, specialized manufacturing to meet rigorous military specifications.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332510
Awarded
Federal
53--Shock Mounts
Solicitation # W912NW-08-T-0048
W6QK Ccad Contr Office

POSTED

over 18 years ago

CLOSED

over 18 years ago
View Details
NAICS: 332510
Awarded
Federal
25--This is an IDIQ contract with an estimated three year contract value of $72,758,928.00 for various Kits for use on the Objective-Gunner's Protection Kit (O-GPK) in support of MRAP and HMMWV military vehicles
Solicitation # W52H09-08-R-0096
W4GG Hq US Army Tacom

POSTED

over 18 years ago

CLOSED

over 18 years ago
View Details
NAICS: 332510
Federal
N -- Saflok System Installation
Solicitation # Reference-Number-F2V30D8025A001
FA4814 6 Cons Pk

POSTED

over 18 years ago

DEADLINE

N/A
View Details
NAICS: 332510
Awarded
Federal
53 -- QSDACEA-F8-07-0896-N
Solicitation # QSDACEA-F8-07-0896-N
Gsa/fas Region 7 Acqusition Center

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Miscellaneous Hardware
Solicitation # W58RGZ08Q0001
W6QK Acc-Rsa

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Closed
Federal
53 -- Blade, Rotary Cutter
Solicitation # HSCG40-08-Q-0MG261
Sflc Procurement Branch 3(00040)

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Awarded
Federal
53 -- QSDACEA-F8-08-8449-N
Solicitation # QSDACEA-F8-08-8449-N
Gsa/fas Region 7 Acqusition Center

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Award notification.
Solicitation # W52H0906R0539
W4GG Hq US Army Tacom

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Closed
Federal
53--Plate, Mounting. Direct your requests and communications ATTN: AMSAM-AC-AL-B, Geraldine Williams, Contracting Officer, Ricardo Santos, Contract Specialist, via email [email hidden] email address or FAX [phone hidden].
Solicitation # W58RGZ-08-T-0141
W6QK Acc-Rsa

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Awarded
Federal
99 -- Mechanical Cipher Locks
Solicitation # FA5685-08-T-0007

POSTED

almost 19 years ago

DEADLINE

N/A
View Details
NAICS: 332510
Closed
Federal
53 -- NIB is interested in finding a partner, working within the Committee for Purchase Operations Memorandum #22 guidelines, to develop and place on the Procurement List a line of padlocks.
Solicitation # Reference-Number-CP-12-04

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details
NAICS: 332510
Awarded
Federal
53--Night Vision Google Hardware
Solicitation # W911N2-08-R-0011
W6QK Lad Contr Office

POSTED

almost 19 years ago

CLOSED

almost 19 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS