Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

53--MOUNT,RESILIENT,WEAPON

Active
SPE4A726Q0775Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is soliciting quotes for 5,447 units of NSN 5342013717973, a resilient weapon mount, to be delivered to DLA Distribution by contract delivery date 0193 days after award. This procurement is being conducted as a simplified acquisition under an RFQ, with all responses required to be submitted electronically and no hard copies available. The solicitation is restricted exclusively to small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, and the NAICS code 332994 applies to this requirement. The response deadline is July 19, 2026, with the solicitation published on July 17, 2026, and available solely through the SAM.gov website. All responsible small business suppliers are invited to submit competitive quotes, provided they meet the timing and electronic submission requirements. Contractual details, including digital drawings and military specifications, can be accessed electronically via the provided links or through the DIBBS portal using the solicitation number SPE4A775. The point of contact for inquiries is listed via email, with all correspondence directed to the buyer specified in the solicitation document. The office managing this procurement is located in Richmond, Virginia, and performance location details are not specified.

General Info

Small businesses bid electronically for 5,447 resilient weapon mounts by July 19, 2026, under DLA Aviation set-aside.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

VA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 5342013717973 MOUNT,RESILIENT,WEAPON: Line 0001 Qty 5447 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0193 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
Manufacture of Breathing Gas Regulator Parts KitThe contract requires the full-scale production, assembly, quality assurance, and timely delivery of 4,000 units of a military-spec breathing gas regulator parts kit identified by NSN 4240-01-542-8151. All manufacturing and assembly activities must comply with stringent defense standards including DFARS requirements, source inspection protocols, and specific packaging guidelines to ensure operational readiness and field reliability. The work must be executed with strict adherence to military quality control procedures, and all components must meet or exceed the technical specifications outlined for the regulator system. This is a subcontract opportunity under the Department of Defense, with performance obligations tied to the defense industrial base. The solicitation was posted on July 17, 2026, and responses are due by July 23, 2026, indicating a short turnaround window for qualified suppliers to submit proposals. The NAICS code 332994 classifies this as a miscellaneous fabricated metal product manufacturing activity, emphasizing precision engineering and components production. While no specific location for performance or point of contact is provided, the contract is administered through a Defense Logistics Agency platform, and successful offerors will be expected to meet strict defense supply chain integrity standards without deviation.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332994
New
DIBBS
Precision Manufacturing of Breathing Gas Regulator Parts KitThe contract calls for the manufacture and supply of 12,000 units of a precision parts kit designed for demand-type breathing gas pressure regulators, which are critical safety components used in life-supporting applications. Each kit must include all necessary components for either assembly or repair, ensuring full operational integrity and compliance with stringent safety standards. The requirement is classified under NAICS code 332994, indicating it falls under other fabricated metal product manufacturing, and is structured as a subcontract under the Department of Defense. All work must be completed and delivered in accordance with technical specifications that prioritize reliability, precision, and consistency, given the life-critical nature of the end-use application. The solicitation was posted on July 17, 2026, with a response deadline of July 23, 2026, indicating a short turnaround window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, but the contract is managed through the Defense Logistics Agency’s DIBBS system, suggesting a formal procurement process governed by federal contracting protocols. The absence of a set-aside designation implies the opportunity is open to all eligible contractors without preference given to small, disadvantaged, or veteran-owned businesses. Successful bidders must demonstrate capability in high-precision manufacturing, quality control, and adherence to defense-grade standards to meet the operational demands of this essential equipment.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332994
New
DIBBS
Precision Manufacturing of Weapon System MountsThe contract requires the manufacture of 5,447 units of a resilient weapon system mount identified by NSN 5342-01-371-7973, adhering strictly to military specifications that govern precision machining, material certification, and compliance with shelf-life and packaging standards. Each unit must meet exacting quality controls to ensure durability and performance under operational conditions, with all materials and processes documented to verify compliance. The work is classified as a subcontract under NAICS code 332994 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with all deliverables expected to align with defense logistics requirements. The solicitation was posted on July 17, 2026, and responses are due by July 19, 2026, indicating a highly time-sensitive procurement timeline. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system via the provided link. Compliance with all federal defense manufacturing guidelines, including traceability of components and adherence to packaging protocols for long-term storage and transport, is mandatory. No set-aside provisions are indicated, suggesting the opportunity is open to qualified vendors without restriction.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
DIBBS
INFLATION ASSEMBLYThe contract pertains to the procurement of 110 units of an inflation assembly identified by NSN 4220-00-920-3651 under solicitation SPE8E9-26-Q-0584, which is a total small business set-aside with a response deadline of July 24, 2026. Delivery is required within 180 days after award, and the solicitation is governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. The contract incorporates specific technical and quality standards including packaging requirements (RP001), inspection and acceptance at origin (RQ009), removal of government identification from non-accepted supplies (RQ011), and strict export control compliance for technical data governed by ITAR or EAR regulations. Disclosure or transfer of this controlled data to foreign persons, regardless of location or corporate affiliation, requires prior authorization, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA approval are permitted access. All data and requirements are subject to DFARS 252.225-7048, and the point of contact for the contract is Tracey Marcus of the Department of Defense’s Construction & Equipment MRO Service I, reachable via email and phone.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
DIBBS
MOUNT, RESILIENT, WEAPONThe contract specifies the procurement of 5,447 units of a resilient weapon system mount identified by NSN 5342-01-371-7973 under solicitation SPE4A7-26-Q-0775, with a firm fixed price and no variance allowed in quantity. Delivery is required within 193 days after award, with inspection and acceptance occurring at the origin. All items must comply with stringent technical and quality standards referenced from the DLA Master List, including adherence to MIL-STD-129R for packaging and marking, with special shelf-life labeling per Type I (Code U) requirements. The item must have no less than 85% of its 96-month shelf life remaining upon receipt by the first government activity, and the shelf life is non-extendable. Manufacturing and quality controls require ISO 9001:2015 compliance, and the supplier must maintain configuration management through engineering change proposals for any deviations. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all materials must be marked and packaged according to MIL-STD-2073-1E and DLA packaging guidelines, including specific palletization and containment instructions. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, and critical attributes are verified at the highest quality levels. The shipment is destined for the DLA Distribution center in New Cumberland, Pennsylvania, and transportation protocols follow DLAD procedural notes C19 and C20. A Certificate of Conformance is authorized unless explicitly withheld by quality assurance instructions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332994
New
Federal
81mm and 120mm Mobile Mortar SystemsThe U.S. Army Contracting Command-New Jersey is conducting a market survey to identify qualified industry sources capable of developing and producing 81mm and 120mm Mobile Mortar Systems for integration with infantry squad vehicles and future light tactical platforms. The system must consist of four core subsystems: a modular mobility capsule with automated emplacement and displacement capabilities, a mortar weapon compatible with both mounted and dismounted operations, a fire control system with detachable components including a self-orienting aiming device, GPS, fire control computer, and power distribution hub, and secure ammunition racks. The mobility capsule must be designed for mounting on the Infantry Squad Vehicle-Utility and be adaptable to other platforms via standardized interfaces, with the ability to rapidly disengage the mortar for dismounted use. The baseplate should not require seating, and all components must support integration with existing U.S. fire control systems. Prototype systems must be ready for government evaluation no later than Fiscal Year 2028, with potential for large-scale production thereafter. All respondents must be registered in the System for Award Management and submit comprehensive technical and organizational information including company capabilities, manufacturing facilities, quality management certifications, production capacity, and projected delivery rates for initial prototypes and subsequent production quantities. Proposals must include current and projected Technology Readiness Levels, detailed design specifications with interface control documents, envelope drawings, solid models, system weight, and data rights information. A risk assessment covering design, performance, and production challenges with mitigation strategies is required, along with details on any existing fielded or developmental systems and availability for demonstration. Responses must be submitted by the deadline with signed Non-Disclosure Agreements and Technical Data Request Questionnaires to access performance requirements, which are not publicly available but referenced from the 81mm system standards for the 120mm variant. While no contract will result directly from this notice, submissions are critical to shaping future procurement efforts, and all information provided will be held confidential and protected as proprietary. Participation is voluntary, with no reimbursement for costs incurred, and responses must be submitted electronically to designated points of contact by the stated deadline.
W6QK Acc-Pica

POSTED

about 19 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332994
New
Federal
DISTRIBUTION UNITThis contract solicitation, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks repair services for a DISTRIBUTION UNIT under solicitation number N0010426QXB76, with responses due by August 17, 2026. The requirement mandates firm-fixed-price, not-to-exceed, or estimated pricing specifically for repair work, explicitly excluding quotes limited to test and evaluation. Contractors must be authorized repair sources and comply with detailed technical specifications including MIL-STD-130 marking, DFARS 252.211-7003 Item Unique Identification, and adherence to manufacturer drawings and repair standards. The contract enforces a strict Repair Turnaround Time of 265 days from asset receipt, tracked via the Commercial Asset Visibility system, with penalties applied for delays unless excused by government-caused delays. A reconciliation price reduction per unit per month, to be stipulated by the vendor, applies for unexcused delays and may trigger termination for default. The contractor must provide throughput capacity, an induction expiration date of 365 days after award, and detailed cost breakdowns including profit rates, quote expiration dates, and CAGE codes for all facilities involved. The solicitation requires full compliance with Buy American regulations, cybersecurity maturity certification, and a Small Business Subcontracting Plan, and mandates electronic submission of quotes to the designated Navy point of contact. Packaging must conform to MIL-STD-2073, and all repairs must meet government inspection standards with records retained for one year post-delivery. A unilateral option for up to a specified percentage increase in quantity may be exercised within 365 days of award under FAR 52.217-6, and vendors must indicate willingness to accept this option. Only authorized distributors of the original manufacturer may submit quotes, requiring formal proof of authorization on company letterhead. All technical documents provided by the Navy carry specific distribution statements governing access and dissemination, and NOFORN or Official Use Only documents require prior government certification. The award will be bilateral, requiring the contractor’s written acceptance, and all communications, documentation, and certifications must be submitted electronically to CHARLES.T.MILLER7.CIV@US.NAVY.MIL.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332994
New
Federal
UNLOAD DRIVE ASSEMBThis contract concerns the repair of the UNLOAD DRIVE ASSEMB, issued under Emergency Acquisition Authority with a required Repair Turnaround Time of 695 days, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The contract mandates firm-fixed-price pricing with no cost escalation, requiring all repair costs—including handling of damaged, incomplete, or worn components—to be fully inclusive. Inspection is mandatory and conducted by the Government; contractors must comply with MIL-STD-130 for marking and adhere strictly to original manufacturer specifications and technical documents. All items must meet operational and functional criteria tied to CAGE code 53711 and reference number 5544118, with any design or part number changes requiring prior written approval and classification under specific code systems. The contract includes an option to increase quantities within 365 days after initial award, at the original unit price, and requires strict adherence to the Buy American Act, cybersecurity maturity certification, and small business subcontracting guidelines. Freight is FOB Origin with the Navy managing logistics under the Commercial Asset Visibility Statement of Work, and contractors must accurately report all asset transactions within five business days. Documentation must include proof of authorized distributor status for the original manufacturer’s item, and all quotes must reflect the requested RTAT or provide a detailed justification for any longer timeline. Testing and evaluation fees apply if an item is deemed beyond repair, and pricing must be compared to new unit costs and lead times. Records of all inspections and repairs must be maintained for at least one year post-delivery. The contract also enforces security prohibitions, cybersecurity compliance, and restrictions on document distribution per OPNAVINST 5510.1, with sensitive materials requiring special handling and certification. Proposals are due by August 17, 2026, and all submissions must include unit price, total price, RTAT, and RMA information where applicable, with final agreement requiring bilateral execution upon contractor acceptance.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332994
New
Federal
INL Kyiv M2 Heavy Machine GunsThe Bureau of International Narcotics and Law Enforcement Affairs (INL) is seeking information from potential suppliers to support the acquisition of M2 heavy machine guns for donation to Ukraine, with a focus on equipping partner nation mobile firing teams against airborne threats. This sources sought notice is for market research only and does not constitute a solicitation or guarantee of a future contract. Respondents must provide detailed company information including UEI and CAGE codes, SBA certifications, and a clear statement of capabilities, with special emphasis on the ability to deliver a minimum of thirty M2 weapons within thirty days of a potential award. All weapons must be new, manufactured to comply with U.S. military specifications MIL-W-13855D and MIL-STD 810, and produced by a current DOD supplier with an active initial product inspection (IPI) from Picatinny Arsenal and ISO 9001:2008 certification. Only manufacturers currently supplying the NSN 1005-01-511-1250 are eligible. Delivery is required FOB Origin to an INL freight forwarder in Baltimore, Maryland, with a maximum timeline of 120 days from contract award and structured into four partial shipments totaling 150 units. Contractors must ensure proper packing, labeling, and documentation including commercial invoices and packing lists with serial numbers and quantities, and are fully responsible for securing all required export licenses under the Arms Export Control Act and ITAR regulations. Any failure to comply with these requirements may result in contract termination and financial liability for the contractor. Warranty procedures require prompt response to defect notifications including ITAR-compliant shipping details, and the contractor must also facilitate customs clearance and tax exemptions through coordination with Ukrainian authorities as directed. The government reserves the right to conduct factory or warehouse inspections to verify quality control and compliance prior to shipment. All responses must be submitted by July 22, 2026, at 5:00 PM EST to the designated contracting officers.
Acquisitions - Inl

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332994
New
Federal
MOTOR,BRAKE,TRAINThis contract solicitation, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, seeks repair services for the MOTOR,BRAKE,TRAIN under solicitation number N0010426QXB77, with responses due by August 17, 2026. The requirement is classified as high priority, demanding expedited responses and strict adherence to repair turnaround times of 265 days from physical receipt of the asset at the contractor’s facility, as tracked through the Commercial Asset Visibility system. Only firm-fixed-price, not-to-exceed, or estimated pricing for repairs is acceptable; quotes for testing and evaluation alone are excluded. Contractors must be authorized repair sources, comply with Item Unique Identification requirements under DFARS 252.211-7003, and follow MIL-STD-130 marking standards. The contract mandates full compliance with Buy American provisions, cybersecurity maturity model certification, and Small Business Subcontracting Plan requirements, in addition to mandatory use of Workflow Pro Assist Module for payment processing. The contractor must provide detailed pricing breakdowns, including unit repair price, total cost, RTAT, and justifications for pricing methodology, with quotes expiring no sooner than 90 days. Any failure to meet the 265-day RTAT will trigger a per-unit-per-month price reduction, capped at an amount specified by the vendor, without prejudice to other remedies including termination for default. A unilateral option for up to a specified percentage increase in quantity may be exercised within 365 days of award, incorporating FAR 52.217-6. Packaging must conform to MIL-STD-2073, and all repairs must follow manufacturer specifications and approved repair standards. The contractor must also supply CAGE codes for award, inspection, and physical repair locations, and prove authorized distributor status with official documentation. All submissions must be sent electronically to Charles T. Miller, and any non-compliance with documentation, certification, or procedural requirements will result in disqualification. The induction expiration date is set at 365 days after contract award, after which no assets will be authorized for repair without bilateral consent.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332994
New
Federal
1005--689-26-3-9927-0035 Police Rifles M5 (VA-26-00068898)- Intent to Sole SourceThe Department of Veterans Affairs intends to award a sole source contract for M5 rifles, specifying that the requirement is brand name only with no substitutions permitted. The intended awardee has been changed from Colt’s Manufacturing Company, LLC. to its authorized distributors, reflecting a shift in procurement strategy while maintaining strict adherence to the M5 model. This action is taken under Special Notice of Intent to Award to comply with FAR 5.101 and is not a solicitation, meaning no formal bids are being sought, but interested parties must register on SAM.gov and monitor for any amendments issued through the Contract Opportunities portal. Vendors must be actively registered in SAM.gov and VetCert through the SBA to qualify, and those claiming Veteran Small Business status must hold current verification from the SBA as mandated by Public Law 109-461, 38 USC 8127, and the NDAA 2021. Additionally, vendors must complete Form 10091 via the VA’s vendorization portal to be eligible for award. The solicitation number is 36C24126Q0651, with a response deadline of July 23, 2026, and the NAICS code is 332994. All inquiries should be directed to Contract Specialist Sebastian Freeze at sebastian.freeze@va.gov, and the final decision on whether to proceed competitively rests solely with the Contracting Officer.
241-NETWORK Contract Office 01 (36C241)

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332994
New
DIBBS
Specialized Hose Clamp Supply (NSN 4730-01-661-4086)The contract specifies the supply of 49 military-specification hose clamps identified by NSN 4730-01-661-4086, requiring full traceability from manufacturing through delivery, with packaging and documentation fully aligned with Defense Logistics Agency standards. All units must meet rigorous defense-grade specifications to ensure operational reliability and compliance with DoD requirements. The solicitation is issued as a subcontract under NAICS code 332994 by the Fluid Handling Division of the Department of Defense, with responses due by July 27, 2026, and the opportunity posted on July 16, 2026. The place of performance and point of contact details are not specified, but the work is expected to support military fluid handling systems, with all deliverables subject to DLA inspection and verification protocols.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 336413
New
Federal
SPE4A526R0268; 1650010462787; Slide, DirectionalThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on potential manufacturers capable of producing the item with NSN 1650-01-046-2787, identified as a Slide Directional. This request is strictly for market research and informational purposes and does not constitute a solicitation, request for proposal, or any form of government commitment. Respondents are encouraged to provide the name of the manufacturer, their city and state location, and a point of contact, all to be submitted to Annette Pruett at Annette.pruett@dla.mil. No funds are available to cover the cost of preparing responses, and all submissions are voluntary with no expectation of award or payment. The solicitation number is SPE4A526R0268, posted on July 17, 2026, with responses due by July 21, 2026, and the NAICS code associated with this requirement is 336413. The contracting office is based in Richmond, Virginia, and the place of performance is also listed in Richmond, Virginia.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
FILTER ELEMENT, FLUIDThe contract seeks proposals for the procurement of Filter Element, Fluid, NSN 1650-01-553-0426, intended for use on F-15 Aircraft, under an Indefinite Quantity Contract with a six-year term. The estimated annual requirement is 1,880 units over the five-year base period, with an initial delivery schedule of 246 days after contract award. This is a configuration control and critical application item, classified under NAICS code 336413, and is being procured as an unrestricted other than full and open competition, with Pall Aeropower Corp. identified as a potential source. Delivery is FOB Origin, and acceptance will occur at destination. No government-provided specifications, plans, or drawings are available, and export control drawings do not apply. Offerors must submit a completed copy of the solicitation to be considered, and proposals must be submitted via the DIBBS portal by the deadline of August 31, 2026. The solicitation was issued on July 31, 2026, and is open to all responsible sources. Evaluation will consider price, past performance, and other factors as outlined in the solicitation, with the Supplier Performance Risk System (SPRS) used to assess vendor reliability. The point of contact is Renee Griffin at the DLA Aviation office in Richmond, Virginia.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334416
New
Federal
NSN: 6685-01-698-2840, SENSOR, AMBIENT TEMP, WSDC: JDN, ARLEIGH BURKE CLASS DDGThe contract is a Firm Fixed Price, Indefinite Quantity Contract with a five-year base term and no option periods, awarded as a Total Small Business Set-Aside under NAICS code 334416 for Sensor, Ambient Temp with NSN 6685-01-698-2840. The minimum guaranteed quantity is 14 units over the contract period, with a maximum cap of 80 units, and an estimated annual requirement of 54 units. Deliveries must be made to DLA stock locations on the east and west coasts under FOB Destination terms with Inspection and Acceptance at origin, and the item is subject to export control and heightened quality standards. Surge requirements are excluded, and the requested delivery schedule is 230 DARO. The solicitation will be issued on or about August 7, 2026, via the DLA Internet Bid Board System, with no paper copies available and no reverse auction conducted. Proposals must be submitted by August 3, 2026, and the award will consider price, past performance, and other factors outlined in the solicitation. The point of contact is Danisha Wright at DLA Aviation in Richmond, Virginia.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332911
New
Federal
VALVE AND YOKE, PILOThe solicitation seeks proposals for the Valve and Yoke, Pilo, identified by NSN 2915-01-051-3748, under an indefinite quantity contract with a five-year base period, during which an estimated 80 units will be required annually. The contract term spans 60 months, with delivery scheduled to commence within 466 days after award, and all items are subject to Government Factory Acceptance Test and Government Product Limitation Testing. This is a critical application item subject to export control and configuration control, with limited technical data provided by the Government. The NAICS code is listed as 332911, and the procurement is unrestricted and not conducted through full and open competition, with Ontic Engineering & Mfg. Inc. identified as a potential source. FOB destination terms apply, and inspection and acceptance occur at origin. Offerors must submit a complete copy of the solicitation to be considered, and proposals must be submitted via the DIBBS system prior to the August 31, 2026 deadline. The award will consider price, past performance, and other evaluation criteria as outlined in the solicitation, with the Supplier Performance Risk System informing assessment. The point of contact for inquiries is Renee Griffin, reachable at renee.griffin@dla.mil.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
SENSING ELEMENT, FIRE DETECTOR SYSTEMThe contract solicitation is for the procurement of a Sensing Element, Fire Detector System with NSN 6340-01-317-1209 under an indefinite quantity contract for a five-year term, with a delivery schedule of 537 days after order award. This is a configuration control and critical application item with a NAICS code of 334511, and the procurement is classified as an unrestricted other than full and open competition, with Meggitt Safety Systems, Inc. identified as the potential source. All offers must be submitted in writing via a completed solicitation available through the DLA Internet Bid Board System on or about July 31, 2026, with proposals due by August 31, 2026. Delivery is FOB origin, and inspection and acceptance occur at origin; no government-provided specifications, plans, or drawings are available. Estimated annual quantities are 40 units over the base period, and export control drawings do not apply. The award will be based on a combination of price, past performance, and other criteria outlined in the solicitation, with the Supplier Performance Risk System (SPRS) factored into evaluation. The procuring activity is the Department of Defense through DLA Aviation, based in Richmond, Virginia, and inquiries should be directed to Renee Griffin at renee.griffin@dla.mil.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
FAIRING BACK/AIRCRAFT SEAT BACK CUSHION/AIRCRAFT SEAT CUSHION
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
SPE4A726R0715-011532314-CYLINDER ASSEMBLY,AThe Defense Logistics Agency is conducting market research to identify qualified industries capable of manufacturing the Cylinder Assembly, A, identified by NSN 1650-011532314 and part number 1168960-507. The requirement calls for full new manufacture including component procurement, inspection, testing, preservation, packaging, and shipping, with additional responsibilities spanning supply chain management, production forecasting, procurement of long-lead items, and addressing diminishing manufacturing sources and material shortages. The estimated annual need is 92 units, and unit pricing will be determined upon contract award. This effort is classified under NAICS code 336413 and is being managed by the DLA Aviation office in Richmond, Virginia, with no set-aside provisions applied. Responses are due by July 24, 2026, and the outcome will inform the subsequent procurement strategy. Interested parties must possess the infrastructure and expertise to independently execute all aspects of production and logistics for this critical aerospace component. The point of contact for inquiries is April Reed, reachable via email or phone, and all submissions must be directed through the official SAM.gov portal referenced in the posting. The place of performance is unspecified beyond Virginia, and contractors are expected to handle end-to-end delivery of conforming assemblies to meet military requirements. This synthesis of technical, logistical, and supply chain demands highlights the need for experienced manufacturers with proven capabilities in defense-grade component fabrication.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
Federal
81--COVER,SHIPPING AND STOThe U.S. Department of Defense, through DLA Aviation, is soliciting quotes for 143 units of NSN 8140015933819, labeled as COVER, SHIPPING AND STO, with an approved source of 18565 13658034 in tan color. The requirement is to deliver all items to W1A8 DLA DISTRIBUTION, with a lead time of 323 days after order placement. This procurement is issued as a Request for Quote under solicitation number SPE4A526Q0589 and is open to all responsible sources; no hard copies of the solicitation are available, and technical specifications, plans, or drawings are not provided. Quotes must be submitted electronically and received by the deadline of July 26, 2026, with no set-aside designation applied. The solicitation was posted on July 17, 2026, and the NAICS code 332439 applies. All inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or the DIBBS website by entering the solicitation number.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
Federal
15--TRACK,FORWARD,DOORThe contract solicitation is for the procurement of three forward door tracks and four additional forward door tracks, identified by NSN 1560001054454, to be delivered to DLA Distribution Warner Robins within 317 days after award. The solicitation, numbered SPE4A726Q0849, is a combined RFQ posted on July 17, 2026, with a response deadline of July 21, 2026, and is open to all responsible sources without set-aside restrictions. The item falls under NAICS code 336413 and is managed by the Department of Defense’s DLA Aviation office located in Richmond, Virginia. Quotations must be submitted electronically, and no hard copies of the solicitation are available; all technical documentation including digitized drawings and military specifications must be accessed online through the provided SAM.gov link or via the DIBBS portal by entering the solicitation number. Inquiry questions should be directed via email to the designated primary point of contact listed in the solicitation document.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336412
New
Federal
Cutback shroud replacements, T64 SIO Contract SPE4AX19D9400
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
16--DUCT ASSEMBLY,AIR CThe U.S. Department of Defense through DLA Aviation is seeking quotes for the procurement of 40 units of NSN 1660007995861 DUCT ASSEMBLY,AIR C, with 39 units to be delivered to DLA Distribution Depot Oklahoma within 999 days after award and one unit to be delivered within 270 days after award. This solicitation, identified as SPE4A7726Q0848, is a total small business set-aside under FAR 19.5, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 336413 covering aircraft propulsion system and engine parts manufacturing. Responses must be submitted electronically before the deadline of July 29, 2026, and are open to all responsible sources that meet eligibility criteria. The contract is managed by the Office of DLA Aviation located in Richmond, Virginia, with all inquiries directed to the designated point of contact via email. There is no specified place of performance beyond the delivery destinations listed, and the solicitation document can be accessed through the SAM.gov workspace or the DIBBS website using the provided solicitation number.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
Federal
CABLE ASSEMBLY, CONTROLThe U.S. Department of Defense, through DLA Aviation, is seeking proposals for a Cable Assembly, Control, identified by NSN 1680-01-321-6778 and 1000236575, under an indefinite quantity contract with a five-year base period and a total term of 60 months. The contract is designated as an unrestricted other-than-full-and-open procurement, with estimated annual quantities of 40 units, and delivery is required within 195 days of award. The item is classified as a configuration control and critical application component, and manufacturing must comply with NAICS code 336413. FOB origin applies, and inspection and acceptance will occur at the point of origin. The Government will provide limited specifications, plans, or drawings, and export control drawings are not applicable. Offerors must complete and submit the full solicitation document to be considered, and submissions must be made via the DLA Internet Bid Board System (DIBBS) after its issuance on or about July 31, 2026, with a proposal deadline of August 31, 2026. Potential suppliers include Transdigm, Inc., Lockheed Martin Corp., Lockheed Martin Aeroparts, and Derco Aerospace, Inc. Evaluation will consider price, past performance, and other factors as outlined in the solicitation. Supplier Performance Risk System (SPRS) data will be used in the award decision. The point of contact for inquiries is Renee Griffin, reachable at renee.griffin@dla.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details