Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

56--The contractor will provide and install (2) Modernfold Acousti-seal #932 full height folding partitions with automatic seals, steel track with trolleys, (2) ADA compliant pass doors to divide fitness center gym floor area.

Active
W911QY13P0403Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Army Contracting Command at Aberdeen Proving Ground, on behalf of the Natick Soldier System Center, plans to award a firm fixed price purchase order on a sole source basis to PAPPAS Company Inc. for the provision and installation of two Modernfold Acousti-seal #932 full height folding partitions with automatic seals, steel tracks with trolleys, and two ADA-compliant pass doors to divide the fitness center gym floor area. This requirement is unique because the fitness center's prime contractor and architect worked directly with PAPPAS to design and approve the installation, including concealed structural framing and blocking inside the walls that specifically accommodate this folding partition system. Because of this specialized knowledge and custom installation requirements, only PAPPAS has the capability to fulfill the contract while ensuring the manufacturer’s warranty remains valid. Market research identified PAPPAS and one other vendor as local suppliers of the Modernfold Acousti-seal #932; however, due to the building’s structural design and prior collaboration between the architect and PAPPAS, the government must rely on PAPPAS as the sole source. The agency does not foresee any other barriers to competition but intends to consider competitive procurements for future requirements that do not involve the pre-installed concealed framing. Interested parties were invited to express their interest by a specified deadline, although the government retains discretion on whether or not to pursue competition based on the responses received. The contracting office and point of contact for this procurement are located at the Natick Contracting Division in Massachusetts.

General Info

Sole source fixed-price contract to PAPPAS for custom folding partitions in fitness center gym.

NAICS

238390 - Other Building Finishing Contractors

Place of Performance

MA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Natick
ContactsNo contacts available
OfficeNATICK, MA, 01760-5011, USA
Office AddressNATICK, MA, 01760-5011, USA
ContactsNo contact information available

Full Description

Show more
Introduction: Pursuant to FAR Subpart 13.106-1(b)(1), the Army Contracting Command - Aberdeen Proving Ground, CCAP-SCN, Natick Contracting Division, on behalf of the Natick Soldier System Center (NSSC), intends to award a firm fixed price purchase order on a sole source basis to: PAPPAS Company Inc. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES and no solicitation will be issued; however, any firm that believes it can meet the requirement may give written notification to the Contracting Officer. Supporting evidence must be furnished in sufficient detail to demonstrate the ability to comply with the requirement listed. A determination by the government not to compete this proposed contract based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. 1. Nature and description of the supplies or services required to meet the agency's needs: The contractor will provide and install (2) Modernfold Acousti-seal #932 full height folding partitions with automatic seals, steel track with trolleys, (2) ADA compliant pass doors, one on each side of center column to divide fitness center gym floor area. 2. A demonstration that the proposed contractor is the only source available to provide these services or goods (i.e. unique qualifications, proprietary rights, etc.): The fitness center building prime contractor was required to provide submittals for government approval for NFPA 101, class A fire rated folding partition with ADA compliant doors so that he could install concealed structural framing and blocking inside the building wall framing in specific locations required for mounting the selected/approved folding partition before installing the finish wall board. The concealed structural framing and blocking inside the building wall framing is specifically located for mounting the selected/approved Modernfold Acousti-seal #932 folding partition in cooperation with the selected vendor PAPPAS CO, and the Architect which was subcontracted by the fitness center building prime contractor. The selected vendor, PAPPAS Company Inc, has direct knowledge of blocking and framing locations concealed in the fitness center walls, necessary to mount the partition installation hardware, wall brackets and tracks. Modernfold is the only manufacturer providing the Acousti-seal #932 folding partition that worked with the fitness center architect, therefore no other vendors would have the necessary direct knowledge to provide and install the partitions. Additionally, the government benefits from the Warranty remaining in full effect when installed by the approved installer. 3. A description of the market research that was conducted and the results, or a statement of the reason a market research was not conducted: Market research was conducted for vendors within the closest proximity to NSSC which resulted in two vendors providing and installing the Modernfold Acousti-seal #932. The two nearest vendors were PAPPAS CO. and Willco Sales & Service Inc. Due to the architect of the new fitness center working with PAPPAS directly on the design for the required Acousti-seal #932 folding partitions the government must use PAPPAS CO. as the sole source vendor for this requirement. 4. Any other facts supporting the use of other than full and open competition: None 5. A statement of the actions, if any, the agency may take to remove or overcome any barriers to competition before any subsequent acquisition for the supplies or services required: The government fully intends to compete any future requirements for Modernfold Acousti-seal #932 folding partitions as long as they do not relate to the already installed concealed structural framing and blocking inside the new fitness center. Due to the architect of the new fitness center choosing to work with the specific vendor PAPPAS the government does not have the ability to compete this requirement or any future requirements that relate specifically to the pre-designed location for the installation of the Modernfold Acousti-seal #932 partitions in the new fitness center. 6. Interested parties may identify their interest and capability by sending responses to this requirement to the Army Contracting Command - Aberdeen Proving Ground CCAP-SCN, Natick Contracting Division via e-mail: contact@example.gov no later than 12:00 p.m. 5 September 2013. Contracting Office Address: Army Contracting Command - Aberdeen Proving Ground CCAP-SCN, Natick Contracting Division US Army Soldier Systems Center Kansas Street, Building 1 Natick, MA 01760-5011 Point of Contact: Sean Auld Contract Specialist contact@example.gov

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QK Acc-Apg Natick

Same awarding agency

NAICS: 313210
New
Federal
RFI - Novel or Multifunctional Fibers, Yarns, Coatings/Finishes and Fabrics for Soldier Protection and Comfort (MFFYF)
Solicitation # RFINovelOrMultifunctionalFibersYarnsCoatings-FinishesandFabricsForSoldierProtectionAndComfort(MFFYF)
The US Army DEVCOM Soldier Center, in coordination with the Product Manager for Soldier Clothing and Individual Equipment, has issued this Sources Sought Announcement to identify potential sources of multifunctional fibers, yarns, fabrics, coatings, or finishes. The primary objective is to enhance the environmental protection of dismounted Warfighters by identifying materials that provide at least two functionalities, such as moisture management, thermal protection, repellency, vector protection, and flame resistance. The government is seeking both near-term solutions with a Technology Readiness Level (TRL) of 5 to 7+ for rapid integration into active Programs of Record, and far-term next-generation concepts with a TRL of 2 to 4 to inform future technology investments. All submissions must be completely PFAS-free and avoid cyclic siloxanes, silicones, and heavy metal catalysts. Respondents must provide detailed business information, including CAGE and NAICS codes, and verify compliance with the Berry Amendment. Technical submissions require comprehensive data, including GHS-compliant Safety Data Sheets and verifiable test reports adhering to standards such as ASTM D5034 for tensile strength and AATCC TM22 for water repellency. Physical samples, including specific yardage for fabrics or minimum meterage for yarns, must be submitted for destructive laboratory testing. Electronic responses, including white papers and the completed Appendix A template, are due by December 23, 2026, with physical samples to follow within six weeks. This announcement is for information gathering and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.
Broadwoven Fabric Mills

POSTED

7 days ago

DEADLINE

in about 2 months
View Details
NAICS: 315120
Federal
Request for Information on Combat Boot Sock
Solicitation # RequestForInformationOnCombatBootSock
The U.S. Marine Corps Portfolio Acquisition Executive Marine Corps is conducting market research through a Sources Sought Announcement to identify potential manufacturers for a high-performance combat boot sock. Designed for Department of Defense personnel operating in temperatures above 20 degrees Fahrenheit, the socks must be Berry Amendment compliant domestic productions. The required design is an over-the-calf length featuring cushioning to prevent blisters, graduated compression to promote blood flow, a non-slip top cuff, arch support, and nylon reinforcement at the heel and toe. Material specifications require a minimum of 52 percent wool (25 microns or finer), 20 percent nylon, and 1 percent spandex, with a strict prohibition on cotton and rayon fibers. The socks will be required in four classes: Marine olive drab green, black, coyote 498, and undyed/natural, across sizes small through extra-large. Performance standards include strict criteria for bursting strength, dimensional stability, wicking, and colorfastness, with quality inspections following ASTM D3990 and ASQ/ANSI Z1 standards. This is currently a Request for Information for planning purposes only and does not constitute a solicitation or commitment to procure. Interested parties, including non-manufacturing suppliers with qualified domestic partners, must submit their CAGE code, business size, and NAICS information electronically to the designated points of contact by October 30, 2026, at 5:00 PM EST.
Apparel Knitting Mills

POSTED

14 days ago

DEADLINE

in about 19 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS