Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

58 -- AN/PRC-117F Multiband Man Packs

Active

Reference-Number-F1UGAS7211A001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government plans to award a sole source contract to Harris Corporation in accordance with FAR 6.302-1(a) for the procurement of AN/PRC-117F Multiband Man Packs. This contract is not open for competitive proposals, and no award will result from this notice. The announcement serves only as an informational notice and is not a solicitation for bids or proposals. Any questions related to the solicitation must be submitted via email within three days of the notice date; telephone inquiries will not be accepted. The contract is associated with solicitation number Reference-Number-F1UGAS7211A001 and is linked to the Department of Defense's 354th Contracting Squadron located at Eielson Air Force Base, Alaska. The procurement falls under NAICS code 334290, related to radio and television broadcasting and wireless communications equipment manufacturing. The place of performance is not specified in the contract data provided. Interested parties must direct any communications about the solicitation to the designated email contact.

General Info

Sole source contract awarded to Harris Corporation for AN/PRC-117F radios, no competitive bids.

Agency

Department Of Defense → FA5004 354 Cons Pk

NAICS

334290 - Other Communications Equipment Manufacturing

Place of Performance

AK

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 24

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA5004 354 Cons Pk

ContactsNo contacts available

OfficeEIELSON AFB, AK, 99702-2200, USA

Organization / AgencyDepartment Of Defense → FA5004 354 Cons Pk

Office AddressEIELSON AFB, AK, 99702-2200, USA

ContactsNo contact information available

Full Description

Show more

The Government intends to award IAW FAR 6.302-1(a), a contract, on a sole source basis to Harris Corporation. This notice of intent is NOT a request for competitive proposals. No award will be made in response to advertisement. This synopsis is for informational purposes and is not soliciting proposals. Please contact contact@example.gov on information regarding the solicitation within 3 days of the date of this notice. NO TELEPHONE inquiries/responses will be accepted.

Similar Contracts

Same NAICS industry code

Specialized Electronic Parts Supply for PREAMP,MASThis subcontract involves the supply of high-reliability electronic components and materials essential for the repair of PREAMP,MAS (P/N: 5798-8000-001) in support of US Navy NAVSUP Weapon Systems Support projects. The selected provider must source all parts in strict accordance with OEM specifications and technical drawings, ensuring the delivery of certified hardware and electronic components to the designated repair facility. The contract mandates full material traceability and strict compliance with the Buy American and Trade Agreements Act under DFARS 252.225-7036. Classified under NAICS code 334290, the opportunity was posted on October 29, 2026, with a response deadline of November 24, 2026.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

PREAMP,MAS Overhaul and Repair ServicesThis subcontract for PREAMP,MAS Overhaul and Repair Services involves the disassembly, cleaning, inspection, component-level repair, and reassembly of units for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected provider must troubleshoot defective components and execute repairs in strict accordance with approved manuals and drawings to return eight units to ready-for-issue condition, accompanied by detailed inspection reports. To qualify, the contractor must possess specialized test equipment and calibration systems that meet ANSI/NCSL Z540.3 standards. Additionally, the provider is required to hold either ISO 9001 or SAE AS9100 certification. This opportunity falls under NAICS code 334290 and is managed through the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

Supply of Panel Assembly, Key (NSN 7RH 1680-01-589-2441 P8)This subcontract, issued by the Department of Defense through Pa DLA Aviation At Philadelphia, requires the procurement and delivery of one unit of Panel Assembly, Key, identified by NSN 7RH 1680-01-589-2441 P8. The selected provider must source the component from a government-approved manufacturer and submit an authorized distributor letter on the manufacturer's official letterhead. Additionally, the contractor is required to certify the country of origin in compliance with the Buy American and Balance of Payments Program. The opportunity falls under NAICS code 334290 and was posted on October 29, 2026, with a response deadline of November 17, 2026. The primary objective is the successful delivery of the physical panel assembly to support prime contractors on Department of Defense hardware procurements.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

SWITCH,ELECTRONIC

Solicitation # SPRPA127QUA06

Solicitation SPRPA127QUA06, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of five electronic switches identified by NSN 5895-01-710-5758. The government requires newly manufactured spares only, as refurbished or repaired materials are ineligible for award. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The award will be made to a single offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for ESD/EM protection and the use of Qualified Products List materials. Reporting for end items must be conducted via Wide Area WorkFlow. Key regulatory compliance includes the Buy American Act, DFARS requirements for Critical Safety Items, and cybersecurity standards under DFARS 252.204-7012. Offerors must maintain current representations and certifications in the System for Award Management and provide authorized distributor letters if applicable.

Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

Solicitation # N0010426QSD42

Solicitation N0010426QSD42 is a firm-fixed-price request for the teardown, evaluation, repair, and modification of five Control Modules (NSN 7GH 5895-01-606-3611) for the Navsup Weapon Systems Support Mech. The government is seeking a Repair Turnaround Time (RTAT) of 165 days, measured from the physical receipt of the asset at the contractor facility to final government acceptance. The contract includes an option for an additional quantity of up to five units. All freight is handled by the Navy as FOB Origin, and Government Source Inspection (GSI) is required at the contractor's location. Award will be made to a single, responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Contractors must utilize the Wide Area Workflow (WAWF) system for invoicing and the Commercial Asset Visibility (CAV) system for transaction reporting. Technical compliance requires adherence to MIL-STD-130 for identification and MIL-STD-2073 for packaging. Offerors must provide unit pricing, RTAT, and proof of authorized distributorship if applicable. The solicitation is open for responses until November 10, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

IP-Based KVM Switching and Management System

Solicitation # PR514027

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 8 hours ago

DEADLINE

Supply of RF Power Dividers (NSN 5895-01-690-3269)

Department of National Defence

POSTED

about 15 hours ago

DEADLINE

Supply of Crypto Ignition Keys (NSN 5810017060678)This subcontract involves the procurement and delivery of 10 units of Crypto Ignition Keys, identified by NSN 5810017060678, to support prime contractors delivering DLA Aviation supply contracts for the Department of Defense. The selected provider must ensure all units meet strict technical specifications and provide necessary Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313 for hazardous materials. Delivery is required FOB Destination to FPO 96675. To be eligible for this award, contractors must maintain an active CAGE code and SAM registration, and demonstrate compliance with NIST SP 800-171 standards. The opportunity falls under NAICS code 334290 and is managed by the Aviation Supply Chain ESOC Buys. Responses are due by November 2, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Radio Set Carrier Supplier (NSN 8465-01-698-0473)This subcontract with C AND T Supply Chain for the Department of Defense involves the manufacture or sourcing of 245 radio set carriers under NSN 8465-01-698-0473. The supplier is responsible for ensuring all hardware complies with the DLA Master List of Technical and Quality Requirements and must properly package and mark all items for international shipment. The contract falls under NAICS code 334290 and requires strict adherence to NIST SP 800-171 DoD Assessment compliance for cybersecurity. Interested parties must submit their responses by November 9, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Supply of Invasive Blood Pressure Transducer Interface CablesThis subcontract involves the supply of right-angle invasive blood pressure transducer interface cables featuring Edwards connectors for oval transducer connections. These components are intended for prime contractors fulfilling medical supply contracts for the Department of Defense Medical Supply Chain. All deliverables must adhere to FDA medical device regulations and meet MIL-STD-129 standards for shipment and storage marking. The contract is categorized under NAICS code 334290 and specifies that the cables will be delivered in individual units. Performance for this requirement is located in Williamsburg, Virginia. Interested parties should note the response deadline of November 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Video Enhancing Unit Supplier (NSN 5836-01-601-9327)This subcontract involves the supply of seven fully functional video enhancing units to prime contractors supporting Department of Defense hardware contracts for DLA Troop Support. The supplier is responsible for manufacturing or sourcing hardware that strictly matches NSN 5836-01-601-9327 and Part Number JTE60449-2. The contractor must ensure all deliverables comply with DLA Technical and Quality Requirements RA001 and adhere to NIST SP 800-171 standards for the protection of defense information. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 334290.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Supply of Digital Data CouplersThis subcontract involves the procurement and delivery of 24 Digital Data Couplers, identified by NSN 7025014639189, to support prime contractors fulfilling Department of Defense supply contracts. The work is managed under the agency for Construction and Equipment T & IFO EQ, with the place of performance located in Anniston, Alabama. The contractor is required to adhere to strict packaging and marking standards in accordance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. Additionally, the provider must ensure full compliance with all prohibitions regarding covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

More opportunities from Department Of Defense → FA5004 354 Cons Pk

Same awarding agency

Certified Boiler Inspection ServicesThis subcontract for Certified Boiler Inspection Services involves performing technical inspections and deficiency evaluations of high-pressure power boilers at Eielson AFB for prime contractors on Air Force facility projects. The scope of work requires analyzing component conditions using non-destructive testing equipment in accordance with manufacturer requirements and ASME Section IX standards. The selected provider will coordinate directly with State of Alaska Boiler Inspectors to establish effective repair strategies. Key deliverables for this engagement include the submission of Initial Deficiency Evaluation reports and Letters of Recommended Repair. This effort is managed under the Department of Defense via the 354 Cons Pk agency.

Engineering Services

POSTED

DEADLINE

High-Pressure Boiler Component SupplierThis subcontract involves the supply of specialized replacement parts for Springfield Boiler Co. Model 1951 and Indeck Keystone Energy Model 2013 high-pressure boilers. The supplier is responsible for sourcing OEM or equivalent water wall, super heater, and economizer tubes, as well as high-pressure valves and piping components for prime contractors working on Air Force facility projects. All materials must strictly adhere to ASME boiler codes and manufacturer tolerances, and must be delivered with full material certifications and mill test reports. The contract is managed under the Department of Defense for performance at Eielson AFB. Interested parties must respond by October 31, 2026, regarding this opportunity categorized under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

High-Pressure Boiler Welding and Repair ServicesThis subcontract for High-Pressure Boiler Welding and Repair Services involves critical technical work on Air Force facility projects at Eielson AFB. The scope of work includes the welding, machining, and reshaping of high-pressure boiler components, specifically targeting the repair of water wall, super heater, and economizer tubes, as well as headers, mud drums, steam drums, power piping, and valves. The contractor is responsible for rolling tubes into headers and providing all necessary repaired components along with State of Alaska Boiler Inspection Reports. To ensure safety and compliance with industry standards, the contractor must possess a National Board R Stamp and employ welders certified under ASME Section IX. This project falls under NAICS code 238220 and is managed through the Department of Defense. Interested parties should note the response deadline of October 31, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Central Heat and Power Plant (CHPP) Boiler Maintenance and Repair Services

Solicitation # FA500427

The Department of the Air Force, specifically the 354th Fighter Wing at Eielson Air Force Base, Alaska, is conducting market research through a Sources Sought notice to identify qualified contractors for on-call, critical emergency and scheduled maintenance and repair services for the Central Heat and Power Plant. The scope of work involves six coal-fired high-pressure power boilers, consisting of four Springfield Boiler Co. Model 1951 and two Indeck Keystone Energy Model 2013 units. Due to the extreme sub-arctic conditions at the installation, the requirement emphasizes rapid response, requiring a qualified technician to be physically on-site within 24 hours of notification and a Letter of Recommended Repair submitted within one business day following inspection. To be eligible, contractors must hold an active National Board R Stamp Certificate of Authorization and ensure all welding personnel are certified under ASME Section IX. All repairs must be inspected and accepted by a certified State of Alaska Boiler Inspector, with the contractor responsible for both scheduling and funding these inspections. The contractor must provide all necessary tooling, transportation, and equipment, as the government will provide no furnished property. Additionally, personnel must be vetted through the Defense Biometric Identification System and comply with all base HAZMAT and safety regulations. This is an informational notice to determine market capabilities and procurement strategy, and it does not constitute a formal solicitation.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Spare Parts and Component SupplyThe contract awards the supply of critical replacement parts for the repair of Turbine-Generator #4 at Eielson Air Force Base, including turbine blades, seals, bearings, gaskets, and electrical components necessary to restore operational functionality. This is a HUBZone Sole Source subcontract, uniquely designated to support small businesses located in Historically Underutilized Business Zones, ensuring targeted economic development and vendor diversity within the Department of Defense supply chain. The North American Industry Classification System code 423690 indicates the procurement falls under miscellaneous industrial machinery and equipment wholesale trade, reflecting the specialized nature of the components required. Performance of this contract is centered at Eielson AFB, Alaska, with a ZIP code of 99702, underscoring the logistical and operational importance of timely delivery to a remote military installation. The contract was posted on May 7, 2026, and is managed under the FA5004 354 Cons Pk office of the Department of Defense, with no specific point of contact listed in the public data. As a sole source award, the selection was not subject to competitive bidding, relying instead on the unique qualification of a single HUBZone-certified vendor to meet the technical and operational demands of the repair mission.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

On-Site Project Management and CoordinationThe contract entails on-site project management and coordination for an overhaul at Eielson Air Force Base, with a primary focus on supervision, scheduling, safety compliance, and seamless coordination between subcontractors and the prime contractor. All activities are to be performed directly at the facility, ensuring real-time oversight and timely resolution of operational issues during the overhaul process. The work requires strict adherence to safety regulations and effective communication to maintain workflow efficiency across multiple teams. This is a HUBZone Sole Source subcontract classified under NAICS code 238990, indicating specialized construction services not elsewhere classified. It is issued under the Department of Defense through the FA5004 354 Cons Pk office, with performance confined exclusively to Eielson AFB, Alaska, 99702. The procurement is designated as a HUBZone sole source, meaning it is awarded without competition to a qualified small business located in a Historically Underutilized Business Zone, supporting economic development and employment in underserved communities.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Auxiliary Systems Inspection and MaintenanceThe contract pertains to the inspection, cleaning, and repair of critical auxiliary systems associated with Turbine-Generator #4 at Eielson Air Force Base, Alaska, including lube oil systems, cooling systems, control valves, and related instrumentation. This work is essential to maintaining operational readiness and system reliability, ensuring the turbine-generator functions efficiently within its designated environment. The scope is focused specifically on technical maintenance tasks requiring specialized knowledge of heavy industrial equipment and precision mechanical systems. This is a HUBZone Sole Source subcontract classified under NAICS code 238220, indicating it is targeted toward a qualified small business located in a historically underutilized business zone. The contract was posted on May 7, 2026, and is issued under the Department of Defense through the FA5004 354 Cons Pk office. All work is to be performed at the specified location in Eielson AFB with a ZIP code of 99702, and no other agencies or offices are referenced as participants in the procurement. The nature of the set-aside limits competition to eligible HUBZone entities, emphasizing support for economically disadvantaged areas while ensuring compliance with federal contracting guidelines.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Technical Documentation and ReportingThe contract titled Technical Documentation and Reporting is a HUBZone Sole Source subcontract awarded under NAICS code 541330 for the development of detailed technical documentation related to equipment maintenance and restoration activities. The work requires the creation of tear-down reports, repair logs, as-found and as-left condition records, supporting photographs, and final restoration reports, ensuring comprehensive documentation of all technical processes and outcomes. The place of performance is Eielson Air Force Base with a zip code of 99702, and the contracting activity is under the Department of Defense through the FA5004 354 Cons Pk office, with the opportunity posted on May 7, 2026. As a HUBZone Sole Source subcontract, this award is designated for businesses certified as located in Historically Underutilized Business Zones, ensuring targeted support for economically disadvantaged areas while fulfilling critical defense documentation requirements.

Engineering Services

POSTED

DEADLINE

Electrical Generator RefurbishmentThe contract involves the comprehensive inspection, cleaning, and repair of a 5 MW electric machinery generator located at Eielson AFB, Alaska, with a focus on critical components including the stator and rotor windings, insulation integrity, and brush and slip ring systems. Work requires detailed assessment of winding conditions, performance of insulation resistance and dielectric testing, and maintenance or replacement of brushes and slip rings to ensure optimal generator performance and longevity. The project is classified as a subcontract under a HUBZone Sole Source set-aside, indicating exclusive eligibility for qualifying small businesses located in historically underutilized business zones. The North American Industry Classification System code 335311 confirms the scope relates to electric motor, generator, and transformer manufacturing and repair services. The contracting activity is managed by the Department of Defense through the FA5004 354 Cons Pk office, with performance required at the specified military installation, and the solicitation was posted on May 7, 2026, with no assigned solicitation number.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Steam Turbine Overhaul and RepairThe contract entails a full overhaul of a 5 MW Worthington extracting steam turbine at Eielson Air Force Base, requiring complete teardown, detailed inspection, thorough cleaning, and comprehensive repair. Key repair activities include rotor balancing, replacement of bearings, refurbishment of seals, and precise reassembly to restore optimal operational performance. The work is being executed under a HUBZone Sole Source subcontract, designated for small businesses located in historically underutilized business zones, ensuring compliance with federal socioeconomic procurement goals. The North American Industry Classification System code 333611 confirms the scope falls under turbine and turbine generator set manufacturing and repair services. Performance of the contract is mandated at the specified location in Alaska, with the Department of Defense as the overseeing agency under the FA5004 354 Cons Pk organization.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

Quality Control and Inspection ServicesThe contract titled Quality Control and Inspection Services is a small business set-aside under the SBA program, specifically designated as a Total Small Business Set-Aside, ensuring eligibility and participation by qualified small businesses. It is classified under NAICS code 541330, which pertains to engineering services, and is issued by the Department of Defense through the agency FA5004 354 Cons Pk. The primary purpose of this subcontract is to provide comprehensive third-party quality control oversight throughout all phases of construction, including pre-construction planning, ongoing in-process monitoring, and final inspections, with the goal of verifying strict adherence to contractual specifications and the requirements outlined in FAR 52.246-12 governing inspector responsibilities. All work must be performed at Eielson AFB, Alaska, with a zip code of 99702, ensuring that services are delivered on-site to support federal defense construction projects. The solicitation was posted on April 28, 2026, and while specific point of contact details are not provided, the opportunity is available through the SAM.gov platform for eligible small businesses to pursue.

Engineering Services

POSTED

DEADLINE

Roofing Material Supply (Single-Ply or Metal Panels)The contract is for the supply of new roofing materials including single-ply membrane, metal panels, flashing, and fasteners, all to be provided in strict accordance with manufacturer guidelines and specifications. The work is categorized as a subcontract under a Total Small Business Set-Aside, ensuring participation by small businesses as defined by the SBA, and falls under NAICS code 423330 for merchant wholesalers of construction materials. The materials are to be delivered and implemented at Eielson Air Force Base, Alaska, with a ZIP code of 99702, and the contracting activity is managed by the Department of Defense under the office designation FA5004 354 Cons Pk. The solicitation was posted on April 28, 2026, and the supply must meet all technical and compliance standards mandated for military facility roofing systems.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

70 -- Promina Digital Support System

Solicitation # F2VTM7162A001JCSE

FA4814 6 Cons Pk

POSTED

about 19 years ago

DEADLINE

--Intent to Procure a Single Source Contract for TIL Radios, Antennas, Comant UHF Blade, and Blackhawk Install Kits for use on UH-60 Blackhawk Aircraft for the Kansas Army National Guard

Solicitation # USA-SNOTE-070823-009

W7M9 Uspfo Activity Ks Arng

POSTED

about 19 years ago

DEADLINE

Replacement Antennae for a Communications System

Solicitation # DON-SNOTE-070823-001

POSTED

about 19 years ago

DEADLINE

-- 18 Motorola XTS 5000, 4 Multi-unit charger for XTS 500 Radios, 2 Base stations to include installation & attenna XTS 5000 Base station

Solicitation # USA-SNOTE-070822-010

W7NQ Uspfo Activity Nm Arng

POSTED

about 19 years ago

DEADLINE

58 -- Digital Voice Recorder

Solicitation # FA2521-07-T-0296

FA2521 45 Cons Pk

POSTED

about 19 years ago

DEADLINE

58--FORT WAINWRIGHT, ALASKA has requirement for Peltor headsets. POC Ulanda Ganacias @[phone hidden], fax [phone hidden]

Solicitation # W912CZ07T0042

0413 Aq Hq Contract

POSTED

about 19 years ago

CLOSED

about 19 years ago

XR-2000 RECEIVERS

Solicitation # DON-SNOTE-070820-003

POSTED

about 19 years ago

DEADLINE

59--Channel Intercoms

Solicitation # W9124Q-INTERCOMS

W6QM Micc-White Sands

POSTED

about 19 years ago

CLOSED

about 19 years ago

70 -- Encoder/Decoder CTGS

Solicitation # W444944Y

National Continuity SECTION(CON50)

POSTED

about 19 years ago

DEADLINE

36 -- Fire Station Alerting System

Solicitation # FA5000-07-T-0019

FA5000 673 Cons Lgc

POSTED

about 19 years ago

CLOSED

about 19 years ago

59--MARKET SURVEY - SOURCE SOUGHT

Solicitation # W15P7T-07-Q-L445

POSTED

about 19 years ago

CLOSED

about 19 years ago

--Fire Alarm System Upgrade

Solicitation # USA-SNOTE-070808-004

W7N8 Uspfo Activity Wiang Crtc

POSTED

about 19 years ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS