Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTOR, PLUG, ELECTRI

Active
SPE7M2-26-T-5986Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.

General Info

2,600 plug connectors under QPL, delivery in 161 days, SAM.gov quotes due August 17, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5986.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,PLUG,ELECTRICAL
CONNECTOR,PLUG,ELECTRICAL
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
.
Material manufactured by Amphenol CAGE (77820), Matrix CAGE (14283), or Pyle National CAGE (49367) with lot date codes from July 2006 through June 2016 is not acceptable whether offered as new material or surplus.
Traceability documents may be required by the Government before or after award to establish manufacturing dates and sources.
.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
SPE7M2-26-T-5986
SECTION B
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
.
MATERIAL MANUFACTURED BY BENDIX CORPORATION
CAGE 77820, WITH LOT DATE CODES FROM JANUARY
1977 THROUGH FEBRUARY 1984 ARE NOT ACCEPTABLE.
.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-38999N(1) REVISION NR N DTD 09/14/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-38999/26G(4) REVISION NR G DTD 08/11/2022 PART PIECE NUMBER: D38999/26WD35PB
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017684827 0001 EA 2,600.000
NSN/MATERIAL:5935012605258
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:B9 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SPE7M2-26-T-5986
SECTION B
PR: 7017684827 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/26/2027 Original Required Delivery Date:03/23/2027
SPE7M2-26-T-5986 NSN/Part Number: 5935-01-260-5258 Quantity: 2,600 EA Purchase Request: 7017684827QTY: 2600 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECE
Solicitation # SPE7M5-26-T-367P
This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367F
The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029H
The contract specifies the procurement of 40 units of a commercial off the shelf (COTS) electrical plug connector identified by part number HBL400MGN from HUBBELL INC WIRING DEVICE DIV and NSN 5935016743784, with a unit price of $40.00 and a total value of $1,600.00. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List requirements, MIL-STD-129 labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous under FED-STD-313. Palletization must follow RP001 packaging guidelines. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated receiving facility in Tobyhanna, Pennsylvania, with freight addressed to ASARS 1C BAY 6. The required delivery date is August 3, 2026, and the contract reference is SPE7M0-26-T-029H, governed by DLA technical and quality standards that supersede all other specifications. The point of contact is Gerard Quinn, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-R-XC26
This contract, issued under solicitation number SPE4A6-26-R-XC26 by the DLA Aviation ASC Commodities Division, is a Firm Fixed Price Indefinite Delivery Purchase Order for 28 units of the Cable Assembly, RADI RA001, identified by NSN 5995-01-657-9352 and part number 09-2830203-1 manufactured by General Dynamics Mission Systems, Inc. The item is designated as a Critical Application Item, requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements, accessible online, with specific requirements identified by R or I numbers governing its design, manufacturing, and inspection. The contract mandates compliance with military packaging standards MIL-STD-2073-1E and marking standards MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Sampling for quality assurance must conform to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes treated as major unless otherwise defined. Inspection and acceptance occur at destination, and the contractor must maintain an inspection system consistent with FAR 52.246-2. Delivery is required within 99 days after receipt of order under FOB Origin terms, with shipments destined for various CONUS stock locations identified per individual delivery order. The contract has a base period of five years (1825 days) with a guaranteed minimum quantity of seven units and a maximum order limit of 28 units, and the total estimated contract value is capped at $350,000. The contractor must comply with extensive regulatory clauses covering cybersecurity (CMMC Level 2 self-assessment), defense information protection (RD002), removal of government identifiers (RQ011), physical item marking (RQ017), export control, prohibition of hexavalent chromium and certain materials from Xinjiang, Buy American provisions, and whistleblower protections. Payment is electronic via WAWF, and the contractor is required to use U.S.-flag vessels for ocean transport unless prior written approval is obtained. Offer
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0830
The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M0-26-T-028S
The contract is for the procurement of 600 electrical plug connectors, part number AP-176 manufactured by AMPHENOL CORPORATION, with NSN 5935-01-460-9394, to be delivered within five days to the Tobyhanna Army Depot in Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards such as ASTM D3951. Zero tolerance is enforced for quantity variance, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials packaged per FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet commercial packaging standards consistent with DLA directives. Use of ozone-depleting substances is strictly prohibited unless prior written approval from the contracting officer is secured, and mercury or mercury compounds may not be intentionally introduced into the product except for specific functional exceptions like batteries or instruments, which must include secondary containment per NAVSEA 5100-003D. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated ASARS receiving facility. The contract is issued under solicitation SPE7M0-26-T-028S with a required delivery date of August 3, 2026 and requires compliance with the DoD unit of issue framework. All items must be permanently marked per RQ017 and bear no government identification if rejected. The point of contact for inquiries is Gerard Quinn of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-366T
The contract is for a single electrical plug connector, part number MS3116F22-21P, identified by NSN 5935008929324, which is classified as a qualified item under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including specific standards MIL-DTL-26482J and MS3116E, and is designated as a critical application item. The use of any Class I ozone-depleting substances in its design, manufacturing, or testing is strictly prohibited unless explicit written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements except performance criteria. Packaging must strictly follow DLA requirements, including MIL-STD-129 labeling and RP001 palletization guidelines, with commercial packaging per ASTM D3951 only acceptable if the item is not hazardous under FED-STD-313. The item must be delivered in one unit within 20 days FOB origin to Mayport Naval Station, Florida, with no quantity variance permitted, and inspected and accepted at the destination. Shipping must occur by traceable freight methods; parcel post is prohibited. The contract was issued under solicitation SPE7M5-26-T-366T, with a required delivery date of July 31, 2026, and is subject to full and open competition with no set-aside. All documentation and compliance obligations are binding and supersede general commercial practices unless specifically exempted for commercial items as defined in FAR 11.001.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CONNE
Solicitation # SPE7M0-26-T-031B
This contract pertains to the procurement of a single electrical connector shell, identified by NSN 5935-01-394-8224 and part number 463AS002NF2006F3, under solicitation SPE7M0-26-T-031B. The requirement is for one unit to be delivered within five days of award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapper material, and packaging levels. Marking adheres to MIL-STD-129 with no special markings required, and palletization follows DLA packaging standards. The item is destined for the Naval Supply Depot in Hagatna, Guam, under a RDD 999/NMCS shipment, with freight details governed by DLAD procedural notes C19 and C20. The contract incorporates all referenced technical and quality requirements listed in the DLA Master List, as applicable on the solicitation issue date. The contract was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 334417 for electrical connector manufacturing. It is managed by the Department of Defense’s Maritime Supply Chain ESO Buys office, with Gerard Quinn as the primary point of contact. The delivery must be completed by the original required delivery date of August 4, 2026, and the government retains full control over post-delivery logistics and usage. Federal compliance, including removal of government identification from non-accepted items and physical identification of bare items, is enforced throughout. The procurement is governed by DLA-specific administrative and logistical directives, and the unit of issue is a single unit, consistent with DoD standards. All contractual obligations, including shipping, marking, compliance, and documentation, are binding and must be executed in full alignment with DLA and DoD policies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
TERMINAL BOX
Solicitation # SPE4A7-26-T-608P
The contract pertains to the procurement of four terminal boxes identified by NSN 5940000803932 and part number M24558/12-450, governed by technical specifications MIL-DTL-24558C Supplement 1 and MIL-DTL-24558/12B, with compliance required to DLA’s Master List of Technical and Quality Requirements. All items must meet stringent quality assurance standards, including sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise specified; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The product must be marked per MIL-STD-129 with no special marking codes, packaged per MIL-STD-2073-1E using preservative method 10, contained in E5 units, and palletized according to DLA packaging requirements. Delivery is FOB origin with a 171-day lead time, scheduled for completion by January 31, 2027, to a designated DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. Quantity variance is zero percent, and the contract is managed under solicitation SPE4A7-26-T-608P with a response deadline in August 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-029X
The contract specifies the procurement of two connector receptacles with part number IT41030AFK28-20SB1N0F11 and NSN 5935-01-690-6762 under solicitation SPE7M0-26-T-029X, with a required delivery within five days of award. The unit price is $2.00 per unit, totaling $4.00, with no variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951, and must conform to MIL-STD-129 labeling and RP001 packaging standards. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies. The items must be palletized according to DLA guidelines and shipped using the fastest traceable method—parcel post is prohibited. The delivery destination is ASRS Building 1 Bay 6, Tobyhanna PA, while the freight shipping and marking address is ASARS 1C Bay 6, Tobyhanna PA. The required delivery date is August 3, 2026, and the contract mandates strict adherence to government-specific identifiers, with no alterations to markings on non-accepted supplies. The primary point of contact is Gerard Quinn of the Department of Defense, and the solicitation response deadline is August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-029U
This contract specifies the procurement of a connector receptacle identified by NSN 5935016735782 and part number D38999/20SD97SA, meeting the technical standards of MIL-DTL-38999/20H and MIL-DTL-38999N with revisions dated August 2022 and September 2023 respectively. The item is classified as qualified under the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts, with compliance required per procurement note H01. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date based on acquisition size. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containerization, and all marking must follow MIL-STD-129 without special marking codes. The item is to be palletized per DLA packaging guidelines and shipped via the fastest traceable means, excluding parcel post. The contract calls for six units to be delivered FOB origin within five days of award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, specifically at the ASARS 1C Bay 6 facility in Tobyhanna, Pennsylvania. The required delivery date is August 3, 2026, with the original need date left blank. The contract number is SPE7M0-26-T-029U with a unit price of $6.00 per unit totaling $36.00. The shipping and delivery addresses are both located at the Tobyhanna Army Depot, and the point of contact for inquiries is Gerard Quinn of the Maritime Supply Chain ESOc Buys office under the Department of Defense. The item is classified under NAICS code 334417 and is issued in units of one each (EA) as per DoD authorized unit of issue guidelines.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-029P
The contract pertains to the procurement of a 12V alternator plug connector, identified by part number 6304526-59 and NSN 5935-01-517-0246, with a single unit quantity requiring delivery within five days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 unless otherwise specified, and compliance with MIL-STD-129 for marking and packaging is mandatory. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise stipulated; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The use of ozone-depleting substances is strictly prohibited except with explicit written approval from the contracting officer, and mercury or mercury compounds may not be intentionally introduced, except in specified functional applications such as batteries, fluorescent lights, or naval instruments, with additional containment requirements for portable devices. Packaging must follow DLA-specific standards under RP001 and comply with Fed-Std-313 for hazardous materials, otherwise commercial packaging per ASTM D3951 is acceptable. The item must be shipped by the fastest traceable means, excluding parcel post, to the designated DLA distribution office in Jacksonville, Florida. Delivery is subject to exact quantity compliance with no variance permitted, inspection and acceptance occur at destination, and the supplier must obtain ESA approval if sourcing from an unapproved source. The contract number SPE7M0-26-T-029P and purchase request 7017726995 are referenced in all documentation, with the original required delivery date set for August 5, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
This contract specifies the procurement of a copper alloy socket type tee fitting with a nominal pipe size of 1 inch, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and delivery is required within 100 days of award. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates strict adherence to DLA packaging standards, configuration change management through engineering change proposals, and the removal of government identification from non-accepted supplies. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The supplier is required to furnish one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the point of inspection if applicable. An electronic copy of each COQC must be uploaded as an attachment to the Receiving Report in the iRAPT system for Government records. The COQC documentation is considered part of the item’s price, and compliance is mandatory for acceptance. The solicitation is a total small business set-aside under FAR 19.5 with a response deadline of August 11, 2026, and the point of contact for inquiries is Alla Yakover. The place of performance is New Cumberland, PA, and the contracting activity falls under the Department of Defense’s Nuclear Reactor Program.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0714
The contract pertains to the procurement of 167 fixed bushings, identified as nuts and sleeves, with the NSN 5310-00-916-7522, designed for use in military applications under the Nuclear Reactor Program of the Department of Defense. The component features a #6 .138 inch - 32 UNC-2B threaded nut size and is constructed from aluminum alloy 2024 with an overall cadmium surface treatment, except for the internal locking insert which is made of polytetrafluoroethylene, providing a self-locking mechanism to prevent loosening under vibration. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, whether military or consensus non-government standard, with previous revisions still acceptable for hardware manufactured before the solicitation date. All units must bear identification markings consistent with MIL-STD-130N and adhere to the DLA Master List of Technical and Quality Requirements referenced in the procurement documents, including quality conformance inspection and removal of government identification from non-accepted supplies. The solicitation, under number SPE7M2-26-Q-0714, is a total small business set-aside with a response deadline of August 11, 2026, and a 100-day delivery window after award. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in limited, approved cases such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment layer as per NAVSEA 5100-003D. Packaging must meet DLA requirements and all supplies are subject to federal procurement rules for military hardware. The point of contact for the procurement is Alla Yakover, and performance is required at Hill AFB, Utah, with all submissions governed by the DLA’s eProcurement system and procurement guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-5985
This contract specifies the procurement of lock washers identified by NSN 5310-01-339-6531 under solicitation SPE7M2-26-T-5985, requiring full and open competition with no deviations or waivers permitted unless formally approved. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in explicitly allowed applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The product is designated as a critical application item requiring strict configuration control and engineering change proposal procedures. The contract includes two delivery lines for a total quantity of 128 hardware units, with each line specifying a quantity of 11 and 117 units respectively, to be delivered in HD (hand) units under FOB origin terms, with zero tolerance for variance in quantity. Delivery must occur within 105 days from contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and ASTM D3951 standards with preservation method code 10, and marking must follow MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. Shipments are directed to two DLA distribution depots: Hill AFB, Utah, and Robins AFB, Georgia, with defined freight and parcel post addresses provided. The need ship dates are December 1, 2026 and December 26, 2027, while the original required delivery date is March 27, 2027. The contract is managed by the Department of Defense’s Nuclear Reactor Program, with primary points of contact listed for inquiries. All items must satisfy the DoD-authorized unit of issue and related ANSI X12 standards as referenced by DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELEC
Solicitation # SPE7M2-26-T-5983
The contract specifies the procurement of one plug-in electrical socket with NSN 5935-01-604-0735 and part number RSN116890 from AMPHENOL PCD INC, under solicitation SPE7M2-26-T-5983. Delivery is required within 20 days FOB destination with no quantity variance allowed, and acceptance occurs at the delivery point. Packing must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. Packaging and palletization adhere to DLA’s RP001 requirements, and all handling of hazardous materials must conform to IP025 standards. The item is to be delivered to USS HIGGINS DDG 76 at FPO AP 96667, with transportation governed by DLAD PROC NOTES C19 and C20. The original required delivery date is July 31, 2026, and the contract is tied to project EK5 TP 2 with vendor tracking code YNCA01 SIG A. Technical and quality requirements are governed by the DLA Master List referenced in RA001, and the solicitation falls under NAICS code 334419 managed by the Department of Defense’s Nuclear Reactor Program.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M2-26-Q-0719
The contract awards O-rings under NSN 5331-00-167-5126 with a total quantity of 2,210 units distributed across three delivery points: Norfolk Virginia, San Diego California, and Warner Robins Georgia, with delivery required within 150 days of award. The items must comply with SAE AS3209C and AMS7276J specifications and are classified as critical application items subject to strict quality control. Manufacturing and assembly must be performed only by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List, accessible via eAuditNet. The contract prohibits the use of mercury or mercury-containing compounds in any part of the product, packaging, or preservation, with narrow exceptions for functional components like batteries and sensors specifically authorized by NAVSEA, and mandates shock-proof designs with secondary containment for permissible mercury-containing items. Zero-tolerance sampling applies under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 standards, including strict compliance with MIL-STD-129 marking rules and a ban on class I ozone-depleting chemicals in all materials and processes. Pricing is firm fixed price with no tolerance for quantity variances, inspection and acceptance occur at destination, and FOB terms are origin. All deliveries must use designated military shipping addresses and follow DLA transport protocols.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-5984
The contract specifies the procurement of 23,869 self-locking hexagon nuts under NSN 5310-01-358-7622, with delivery due in 161 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The nuts must comply with technical standards NASM17829 Rev 2, NASM25027 Rev 1, and MIL-DTL-32258, and are classified as a critical application item requiring strict adherence to configuration control and engineering change procedures. All supplies must be free of mercury and mercury-containing compounds except for specific exempted uses such as batteries or sensors approved by NAVSEA, and portable devices containing mercury must include a secondary containment. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require pre-approval. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified as Type 10, Class 50, and no special marking required. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Full and open competition applies, and the contract enforces DLA packaging and procurement requirements, including prohibition of mercury in preservation and packaging materials. The delivery window, quantity, and unit price are fixed with no variance allowed, and the point of contact for inquiries is David Larsen of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7M2-26-Q-0716
This contract specifies the procurement of 65 self-locking hexagon nuts identified by NSN 5310-00-255-0010 and part number MS17830-24C, manufactured in compliance with the non-government standard NASM17830 Revision 3 dated July 31, 2023, and governed by QAP-13873 Revision D. The item is classified as a commercial item and a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. All hardware must conform to the current revision of the applicable standard, with prior revisions accepted only for previously manufactured items; no exceptions apply to future production. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise contracted. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking, except for specific exempted applications such as certain batteries, lights, instruments, or weapon systems as defined by NAVSEA, which must include secondary containment and shock-proof design. The nuts are subject to firm fixed pricing with no variance allowed in quantity, and delivery must occur within 100 days after order award. Pricing brackets are defined for quantities from 100 to 250 and 251 to 500 units, with delivery expected within 100 days for each tier. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including preservation method 33, dry clamping, and non-corrosive materials, with marking per MIL-STD-129 and no special codes. Palletization must follow DLA guidelines, and all packaging must exclude mercury or mercury compounds entirely. Items are to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The solicitation is a total small business set-aside, with a bid deadline of August 11, 2026, and the contract is managed by the Department of Defense’s Nuclear Reactor Program.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing and Quality InspectionThe contract requires the performance of Product Verification Testing and quality sampling for electrical insulation sleeving in strict accordance with MIL-STD-1916 to achieve zero non-conformances. This effort is critical to ensuring the highest level of product integrity and compliance with military quality standards, with all testing and sampling activities designed to validate conformance before acceptance. The work must be executed with precision to meet the zero-defect expectation, and the successful performer will be responsible for documenting and reporting all test results to demonstrate full adherence to the required specifications. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Nuclear Reactor Program under the Department of Defense. The performance location is Tinker Air Force Base with a postal code of 73145-8000. The response deadline is August 12, 2026, and the solicitation was posted on August 3, 2026. All interested parties must submit their proposals by the deadline, and failure to comply with the testing protocol or deliver results meeting the zero non-conformance standard will result in rejection. The contract is not subject to a specific set-aside designation and is open to qualified subcontractors capable of executing high-precision quality assurance under strict military standards.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and palletization services for insulation sleeving in strict compliance with military standards MIL-STD-2073-1E, MIL-STD-129, and DLA RP001, ensuring full adherence to Department of Defense requirements for durability, identification, and handling in logistical environments. All work must be performed to meet exacting specifications for mark clarity, material compatibility, and unit configuration to support safe transport and inventory management across military supply chains. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating the physical site where the services will be delivered and verified. This is a subcontract under NAICS code 561910, related to other support activities for transportation, and is issued by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 12, 2026, leaving a limited window for qualified vendors to submit proposals. The contract does not specify any set-aside status and is open to eligible subcontractors capable of meeting the stringent packaging and labeling benchmarks required for defense logistics. All submissions must be directed through the official DIBBS platform using the provided solicitation reference.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Electrical Insulation Sleeving Manufacturing and SupplyThe contract entails the manufacture and supply of 15,111 feet of electrical insulation sleeving identified by NSN 5970-00-954-1624, which must fully comply with the SAE AS23053C Rev. C specification for use in critical military applications. This procurement is part of a subcontract awarded under the Nuclear Reactor Program within the Department of Defense, and the materials are required to meet rigorous performance and quality standards appropriate for high-stakes defense systems. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating where the delivered goods are to be utilized or inspected. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 12, 2026, indicating a narrow window for qualified suppliers to submit proposals. The NAICS code 335931 classifies the activity under Other Electrical Equipment and Component Manufacturing, aligning the contract with specialized electrical component production rather than general wire and cable manufacturing. The contract is structured as a subcontract, suggesting integration into a larger supply chain managed by a prime contractor under the Department of Defense’s logistics framework. All deliverables must meet exacting military specifications to ensure reliability in sensitive nuclearreactor-related infrastructure.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details