59 -- ELECTRICAL HARDWARE

This is a combined synopsis/solicitation for commercial item prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation WILL NOT be issued. The Request for Quotation number is HSCG35-06-Q-6WNLAD and incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-06. This acquisition is 100% small business set-aside. The NAICS is 423610. The small business sized standard is 100 employees. The contract type will be a firm fixed price purchase order. The Government proposes to solicit quotes for the following: ITEMS: Part Numbers cited are as follows. Substitute items will be accepted. If quoted on substitute item, please provide specifications for all items. 1. Meter Base 1 ea 13 jaw type (Milbank 3423XL) 2. Current Transformer can 1 ea 24x24x12 w/center bar for doughnut Type CT 3. Main Disconnect 1 ea 200 Amp, 3 PH disconnect switch in a NEMA 4X stainless enclosure. Square-D class 3110, type H364NDS with 200 Amp fuses 4. Main Distribution Breakers 1 ea 480 Volt, 225 Amp 3 PH panel Square-D, class 2110 type HCN1452-2N interior Assembly mounted in a type HC2652WP NEMA 3R enclosure. Fitted with main lugs Breakers 1 ea 200 Amp, Anacapa 1 ea 60Amp Elderberry 1 ea 20 Amp 1 ea 15 Amp, HPU 5. QOB 120V Breakers 5 ea 15 Amp Breakers. Square-D $0.00 2 ea 20 Amp GFI Breakers $0.00 1 ea 20 Amp Breakers for existing pnl $0.00 6. Receptacles 10 ea 20 Amp 120V receptacles 7. Photo Cell 1 ea 20 Amp photo cell for dock lights 8. Ground fault beacons 1 ea Yellow to indicate 8ma 1 ea Red to indicate in excess of 15ma 9. Ground Fault 1 ea Cutler-Hammer model D64L2-35 to be mounted in a NEMA 4X enclosure 10. 150 KVA Trans 1 ea Tierney Model ACC3150-8T7AH-PM-ES With four taps below nominal each spaced 2-1/2% 11. Shore tie Recp 1 ea Russellstol Max-Gard 200Amp three phase shore tie Receptacle Model # DBRS2404200 1 ea Russellstol 60Amp three phase shore tie Receptacle Model # DBRS640460 12. Shore tie plug 1 ea Russellstol Max-Gard 200Amp three phase shore tie Plug Model # DS2404MP 1 ea Russellstol 60Amp three phase shore tie Plug Model # (DS6404MP?) to match #DBRS640460 13. Conduit 160 ft 160ft PVC coated ridged 3 Inch 250 ft 250ft PVC coated ridged 2 Inch 200 ft 200ft PVC coated ridged 1 Inch 1 ea PVC coated ridged union 3 Inch 1 ea PVC coated ridged union 2 Inch 1 ea PVC coated ridged union 1 Inch 3 ea Factory 3 Inch 90 degree 2 ea Factory 3 Inch 45 degree 1 ea Factory 3 Inch 30 degree 2 ea 3 inch 6 inch nipples 1 ea 3 inch close nipple 4 ea 3 Inch ridged PVC coated couplings 12 ea 3 Inch Lock Rings 4 ea 3 inch Myers hubs 2 ea 3 Inch PVC coated ridged LB 1 ea 3 Inch PVC coated ridged close nipple 40 ea 3 Inch PVC coated ridged Unistrut straps 2 ea Factory 2 Inch 90 degree 2 ea 2 Inch 6 inch nipples 12 ea 2 Inch Lock Rings 6 ea 2 inch Myers hubs 3 ea 2 Inch PVC coated ridged LB 10 ea 2 Inch ridged PVC coated couplings 2 ea 2 inch close nipple 150 ea 2 Inch PVC coated Unistrut straps 16 ea 1 Inch Myers hubs 2 ea 1 Inch PVC coated Ridged LB 15 ea 1 Inch PVC coated Ridged couplings 50 ea 1 Inch PVC coated Unistrut straps NOTE: All ridged conduit fitting including coupling, conduit hubs and condulets shall be PVC coated 100 ft 1 Inch EMT 25 ea Box of 1 Inch one hole straps 25 ea Box of 1 Inch connectors 25 ea Box of 1 Inch couplings 200 ft - Inch EMT 100 ea Box of - Inch one hole straps 25 ea Box of - Inch connectors 25 ea Box of - Inch couplings 200 ft - Inch EMT 100 ea Box of - Inch one hole straps 25 ea Box of - Inch connectors 25 ea Box of - Inch couplings 14. Unistrut 160 ft 1-5/8 Inch stainless strut 100 ft 7/8 inch stainless strut 50 ea 3/8 Inch stainless strut nuts 15. PVC SCH 80 220 ft 2 Inch for Coms 2 ea 2 Inch Female Adapters 2 ea 2 Inch Male Adapters 4 ea Factory 2 Inch 90 Degree 10 ea 2 Inch PVC coupling 16. Seal Tight 30 FT 3 Inch marine grade seal tight 4 ea 3 Inch seal tight flex connectors (2 for trans.) 60 ft 2 Inch marine grade seal tight 8 ea 2 Inch seal tight flex connectors 30 ft 1 Inch marine grade seal tight 4 ea 1 Inch seal tight flex connectors 50 ft - Inch marine grade seal tight 16 ea - Inch seal tight flex connectors 10 ea - Inch 90 degree seal tight flex connectors 17. Kellem Grips 2 ea 3 inch to work with marine seal tight 8 ea 2 Inch to work with marine seal tight 4 ea 1 Inch to work with marine seal tight Note: If there is a seal tight flex connector that will work as both a Kellem grip and connector that would be great. We will only need the Kellem grips for the 3,2 & 1 Inch flexible seal tight 18. J-Box 5 ea Weather tight duplex receptacles J-box 5 ea Rain tight 6x6x4 J-box with covers 5 ea Weather tight spring loaded duplex receptacles cover 19. OZ Gedney 2 ea 16 X 16'x8 Cast Iron Junction box on through holes 3 inch and 2 inch. Total of 4 holes 20. Terminal Block 4 ea Three lug terminal blocks that will accommodate #3/0 cable 21. Cable 500 ft #4 AWG type XHHW-2 1000 ft #2 AWG type XHHW-2 1000 ft #3/0 AWG type XHHW-2 2000 ft 500 ft #10 AWG XHHW-2 1 White,1 Black, 1 Red, and 1 green 2000 ft 500ft #12 AWG XHHW-2 1 White, 1 Black, 1 Green, and 1 Red 22. Glue/lube 4 pt PVC glue adhesive 1 ea Can Electrical Coating (Scotch Kote) 2 gal Yellow 77 lubricant 1 gal Paint on PVC coating 2 bt De-Ox 23. Tapes, nuts 10 rolls Black 3M 33 plus 2 rolls brown phase tape 2 rolls Orange phase tape 2 rolls Yellow phase tape 2 rolls Green phase tape 200 ea red wire nuts 200 ea Yellow wire nuts 1 spol 1 ea 250' spool 3/8 Inch line 24. Hardware 25 ea - X 3 - Inch stainless Lag bolt 200 ea - X 2 Inch stainless Lag bolt 300 ea - X 1 - Inch stainless Lag bolt 500 ea - hole stainless fender washers 25. ss j box 2 ea 20x20x12 nema 4x ss 2 ea 20x20 back panel AWARD: This purchase will be based on the following criteria: Lowest price for items meeting or exceeding the minimum requirements. CLAUSES: The following FAR provisions apply to this acquisition: FAR 52.222-20 Walsh-Healey Public Contracts Act FAR 52.212-1 Instruction to Offers Commercial Items FAR 52.212-3 Offeror Representatives and Certifications and Certifications Commercial Items, all offerors are to include with their offer a completed copy of FAR 52.213-3. FAR 52.212-4, Contract Terms and Conditions Commercial Items FAR 52.212-5, Contract Terms and Conditions required to Implement Statutes or Executive Orders Commercial Items. The following clauses cited in FAR 52.212-5 are applicable to this acquisition; FAR 52.219-6 Notice of Total Small Business Set-Aside; FAR 52.222-3 Convict Labor; FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26 Equal Opportunity (E.O. 11246); FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans (38 U.S.C. 4212); FAR 52.222-36 Affirmative Action for Workers with Disabilities (29 U.S.C 793); FAR 52.222-37 Employment Reports on Special Disable Veterans and Veterans of Vietnam Era (38 U.S.C. 4212); FAR 232.33 Payment by Electronic Funds Transfer-Central Contractor Registration. FAR 52.204-6 Data Universal Numbering System (DUNS) Number. The full text of clauses is available from the Contracting Officer or may be accessed electronically at: http//www.arnet.gov/far. Offers are due on Nov 17, 2005, by 4:00pm local time. Offers shall be mailed to Commanding Officer, Integrated Support Command (fpk), 1300 Stedman Street, Ketchikan, AK 99901, Attn: Mr Tony Flores, faxed to +1 (555) 000-0000, Attn: Mr Tony Flores, or emailed to contact@example.gov. Offers must provide as a minimum: (1) solicitation number; (2) name and address, point of contact and telephone number of the offeror; (3) price and discount terms, (4) Tax ID Number and (5) phone number. POINT OF CONTACT: Mr Tony Flores, Contracting Specialist, Phone 510/228-0366, Fax 907/228-0298, Email contact@example.gov.