This Sources Sought opportunity from Department Of Defense was posted on October 29, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

6 NSN MOTOR

Closed

CM25177002Federal

Submission Closed11/05/2025, 11:59:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335312

New

SLED

Diesel Prime Power Generator Set SupplierThis subcontract involves the supply of two Diesel Prime Power Duty Rated Generator Sets to support prime contractors on CAL FIRE emergency communications projects. The required units must be 25-35KW, 120V/240V Single Phase with a 3-Wire configuration, mounted on stationary skids. Each generator set must be equipped with digital control panels, electronic governors, and 1000W block heaters, and all equipment must maintain NFPA 110 approval. The successful supplier is responsible for delivering two complete generator sets along with the necessary Operations and Maintenance Manuals. This opportunity is categorized under NAICS code 335312 and is associated with the state of California. Interested parties must submit their responses by the deadline of November 26, 2026.

POSTED

DEADLINE

1PA5A008833.02 HUU Diesel Generator Set

Solicitation # 1PA5A00883.02

CAL FIRE is soliciting quotes for the procurement of two Diesel Prime Power Duty Rated Generator Sets and an Automatic Transfer Switch to support emergency communications equipment at the Red Mountain repeater site (HUU) Unit. These units are intended to replace aging equipment within an indoor generator vault. The required system must utilize N+1 Architecture redundancy, be capable of operating up to 8760 hours per year, and feature programmable duty switching intervals of approximately 100 hours. Technical specifications require the equipment to be NFPA 110 Approved with an alternator featuring a 125C temperature rise over 40C ambient. Deliverables include two copies of Operations and Maintenance Manuals and a warranty covering six months from startup or 1500 hours. The contract will be awarded to the lowest responsible bidder based on price and technical responsiveness, with preferences given to California certified Small Businesses, Microbusinesses, Nonprofit Veteran Service Agencies, or Disabled Veteran Business Enterprises. Bidders may offer equivalent items if they meet the specified quality standards, though the State may require samples for compliance testing. All bids must be submitted using the official CAL FIRE Cost Quote Sheet, with pricing valid for at least 60 days. Delivery is to be made to 135 Ridgeway Ave, Santa Rosa, CA, where offloading will be handled by CAL FIRE personnel. Required documentation for submission includes a Bidder Declaration Form, a Darfur Contracting Act Vendor Certification, and a Payee Data Record.

POSTED

DEADLINE

AC Motor Supply (NSN 6105-01-421-3597)This subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the procurement of one Alternating Current Motor with NSN 6105-01-421-3597. Eligible sources must provide motors matching part number 603511-121 from FM AF, LLC or 801627-603GR2 from ABB Motors & Mechanical Inc. The final product must be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. Strict compliance standards are mandated for this acquisition, including adherence to DFARS 252.204-7012 and NAVSEA 5100-003D to ensure the motor is mercury-free. The opportunity falls under NAICS code 335312, with a response deadline set for November 24, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-0095

Solicitation SPE4A5-27-T-0095, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of three drive shaft assemblies. This critical application item is identified by NSN 6115009462753 and Honeywell International part number 1537347-2. The requirement is an FMS acquisition for Taiwan, with delivery required within 20 days after order, and a required delivery date of October 8, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The final destination is the Parts-Attach General Depot Tainan Branch Warehouse in Taiwan. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific sampling methods per MIL-STD-1916 or ASQ H1331. Technical and quality requirements are further governed by the DLA Master List. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding of covered defense information. Quotations must be submitted via the DIBBS system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L7-27-T-0615

Solicitation SPE7L7-27-T-0615 is a procurement issued by the Defense Logistics Agency for one metallic rectifier, identified by NSN 6130015133062 and associated with EMS Development Corporation part numbers 433D1002-1 or PL433D1002-1. The contract is a total small business set-aside under NAICS code 335312, with delivery required within 20 days after order, destined for the USS MINNESOTA SSN 783. The shipment is FOB Destination, with both inspection and acceptance occurring at the destination. The procurement mandates strict adherence to quality and technical standards, including ISO 9001:2015 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Key regulatory requirements include a CMMC Level 2 self-assessment, restrictions on the use of mercury per NAVSEA 5100-003D, and the safeguarding of covered defense information. Payment and invoicing are to be processed electronically via the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1802

Solicitation SPE7M1-27-T-1802, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 79 units of Motor Field Windings, identified by NSN 6105006470284 and Meggitt North Hollywood Inc part number 150208. This item is designated as a critical application item. The procurement is categorized under NAICS 335312 and is not a small business set-aside, although a HUBZone price evaluation preference may be applied. Quotes are due by November 9, 2026, with a required delivery date of April 1, 2027, and a delivery lead time of 90 days after receipt of order. The contract specifies FOB Origin terms with delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, NIST SP 800-171 cybersecurity standards, and various DFARS deviations regarding hazardous materials and subcontracting for commercial products.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-27-Q-0187

Solicitation SPE7M1-27-Q-0187 is a small business set-aside request for quotations for one alternating current motor, identified as a critical application item with NSN 6105-01-421-3597. The procurement is for a firm fixed price contract with a delivery requirement of 270 days after date of award. The item is associated with part numbers 603511-121 from FM AF, LLC and 801627-603GR2 from ABB Motors & Mechanical Inc. Delivery is designated as FOB origin under the First Destination Transportation program, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. It specifically prohibits the intentional addition of mercury or mercury-containing compounds per NAVSEA 5100-003D. Inspection and acceptance are set for destination; however, a penalty of 2,500 will be added to the evaluation price for any offeror proposing origin inspection. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-0922

Solicitation SPE7M1-27-U-0922 is an indefinite-quantity contract issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of CB Cover Assemblies, identified by NSN 6110015558410 and Lex Products LLC part number 00Y95. The contract specifies an estimated quantity of 113 units, with a guaranteed contract minimum of 16 units and a minimum delivery order quantity of 56 units. The maximum contract value is set at 350,000.00 dollars. Delivery is required within 99 days after the date of order, with shipping terms established as FOB Origin for deliveries within the continental United States. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. This is not a small business set-aside, and the award is based on the price quoted for estimated annual demand under NAICS code 335312. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and mandatory registration via the Account Management and Provisioning System to access the Vendor Shipment Module. The contract incorporates various FAR and DFARS clauses, including those regarding cybersecurity reporting, domestic material restrictions such as the Buy American Act and Berry Amendment, and the prohibition of hexavalent chromium.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Source-Approved AC Motor Production (NSN 6105-01-091-4832)This subcontract involves the manufacture of 67 AC motors under NSN 6105-01-091-4832 for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. Production must strictly adhere to Basic Drawing NR 26055 840-009-003, Revision H, while ensuring full compliance with source control requirements and DFARS specialty metal standards. The final deliverable consists of 67 units that have undergone comprehensive testing and inspection. To qualify for this project, the contractor must maintain JCP certification to handle export-controlled data and demonstrate CMMC Level 2 or NIST SP 800-171 compliance for cybersecurity. The opportunity is categorized under NAICS code 335312 and is managed by the Department of Defense. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Three Diesel RV Generators Brand Name or Equal To

Solicitation # 36C25627Q0094

The Department of Veterans Affairs is soliciting the procurement of three Cummins Onan QD 6000 Model 6.0HDKAH-1044 Diesel RV Generators, or a brand-name equivalent, for the Biloxi VA Medical Center in Mississippi. These generators are intended for emergency management to support facility operations and must feature computer-controlled variable speed operation, sound-controlling housing, a three-point focalized mounting system to reduce vibration, and integrated self-diagnostic capabilities. All units must be new, unused, and delivered in original manufacturer packaging within 25 business days of the award. The contract is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and requires offerors to be registered in the System for Award Management (SAM). The government will utilize a comparative evaluation process to determine the best benefit to the government, reserving the right to select a quotation other than the lowest price if additional benefits are provided. Proposals must be submitted in three separate volumes covering technical capability, pricing, and the delivery schedule, along with a signed SF 1449 and a certificate of compliance regarding limitations on subcontracting. Delivery is FOB Destination, and the period of performance is scheduled from November 27, 2026, to December 22, 2026. The contractor must adhere to strict confidentiality and non-disclosure requirements regarding patient and facility information and comply with Controlled Unclassified Information (CUI) program requirements.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2534

Solicitation SPE7M1-27-T-2534, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside procurement for 17 electric brakes (NSN 6110-01-593-5778), specifically Hamilton Sundstrand Corporation part number 5912919. This critical application item must be delivered within 326 days after receipt of order, with the destination and inspection point set at DLA Distribution Jacksonville. The contract is governed by NAICS code 335312 and requires adherence to strict material restrictions, including a total prohibition of Class I ozone-depleting chemicals and a ban on the intentional addition of mercury, except for specific functional uses defined by NAVSEA 5100-003D. The contractor must comply with rigorous packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. Furthermore, the contract incorporates several FAR and DFARS clauses, including NIST SP 800-171 cybersecurity assessment requirements, the Buy American and Balance of Payments Program, and prohibitions on covered defense telecommunications equipment. All quotations must be submitted via the DIBBS portal by November 20, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF

Solicitation # N0010427RZA15

This presolicitation notice from the Navsup Weapon Systems Support Mech involves the procurement of five alternating current motors, identified by NSN 7H-6105-008308048-E3, for delivery to DLA Distribution Barstow in California. Due to the government's lack of data rights and the impracticality of reverse engineering the parts, the agency intends to negotiate with a single source under FAR 6.302-1. The acquisition is categorized under NAICS code 335312 and is not being conducted as a commercial item procurement under FAR Part 12. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or within 15 days if offering a commercial item alternative. The government maintains sole discretion in determining whether to proceed with a competitive procurement based on the responses received. This action may be subject to various Free Trade Agreements and the Buy American Act depending on the final solicitation clauses.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in 12 days

General Info

Agency

Department Of Defense → DLA Land And Maritime

NAICS

335312 - Motor and Generator Manufacturing

Place of Performance

Set-Aside

NONE

Documents

3 pages · sources-sought

High

2 pages · sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedOct 29

Sources Sought

Response DeadlineNov 5

Deadline has passed

Submission Closed

11/05/2025, 11:59:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

TAURA MITCHELL

contact@example.gov

+1 (555) 000-0000

Full Description

This is a sources sought notice required when using only approved sources under the authority of 10 U.S.C. 3204(a)(1). DLA Land and Maritime is considering a future solicitation(s), and subsequent award, of an Indefinite Quantity Contract (IQC/LTC) for the item(s) listed below. The resultant IQC/LTC could potentially range from 3 to 5 years in length.

Please provide any additional sources that may be able to manufacture this item. See attached Market Survey questionnaire for and Market Research LTC Spreadsheet for NSN(s) and approved source(s) information. Please complete and return directly to the buyer.

Should a company wish to be reviewed and qualified as an “Approved Source”, they may submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring.

For further information, please reference the DLA Land Maritime web page shown below and click on the highlight: Alternate Offer/Source Approval Program for detailed explanation for the information and format necessary for a SAR and for the SAR approval process. http://www.landandmaritime.dla.mil/programs/altofferor/

Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice. In order to make a commercial determination, we would need sufficient documentation to support commerciality.

1. Published price lists (provide location of website).

2. Unredacted commercial sales history (e.g. invoices showing sales to companies outside of Federal, State, or Local Government). The importance of un-redacted invoices is to assist in providing items have been sold commercially at like prices for like quantities.

PLEASE REVIEW THE NSNS LISTED AND PROVIDE ANY SOURCES THAT MAY BE ABLE TO MANUFACTURE THESE ITEMS. THE ONLY APPROVED SOURCES FOR THESE NSNS ARE LISTED BELOW. ALL INFORMATION MAY BE SUBMITTED DIRECTLY TO TAURA MITCHELL AT contact@example.gov. THIS INFORMATION MUST BE PROVIDED BY THE RESPONSE DATE OF THIS NOTICE.

FSC NIIN PN MANF. CAGE

4330 011343836 90-4-1017 ELECTROMECH TECHNOLOGIES LLC 54395

6105 011955321 M-4730-35 ELECTROMECH TECHNOLOGIES LLC 54395

6105 013642104 U-221636 ELECTROMECH TECHNOLOGIES LLC 54395

6105 013642104 U-221636 TRANSICOIL LLC 82686

5990 013925682 U222122 ELECTROMECH TECHNOLOGIES LLC 54395

5990 013925682 42232-1 FISICA APPLIED TECHNOLOGIES, INC. 82152

5930 014137884 220-K160-1 ELECTROMECH TECHNOLOGIES LLC 54395

6105 014468553 U-222303 ELECTROMECH TECHNOLOGIES LLC 54395