Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

61--POWER SUPPLY, IN REPAIR/MODIFICATION OF

Active
N0010426QUC20Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a single unit of a power supply identified by NSN 7H-6130-015469882 and NIIN 7H-6130-015469882, with the part number 4801682, intended for repair or modification purposes. The item must be delivered to W62G2T, W1A8 DLA DIST SAN JOAQUIN in Tracy, California, with a delivery requirement for one unit. The Government does not hold the intellectual property rights or technical data necessary to procure or repair the part from alternative sources, and it has been deemed uneconomical to acquire such rights or to reverse engineer the component. This contract is being executed under FAR 6.302-1, limiting it to a single source due to the unique nature of the part and lack of data. Although the notice invites interested parties to submit proposals or capability statements within 45 days—30 days if awarded under an existing Basic Ordering Agreement—it is not a competitive solicitation. Any award will depend on the offeror, product, or manufacturer meeting all qualification criteria at the time of award, as stipulated in FAR clause 52.209-1. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, but vendors may still propose commercial alternatives within 15 days of this notice. Technical documentation such as specifications and standards can be accessed through ASSIST-Online or DODSSP, though design files, drawings, and deviation lists are not available through these channels. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with Leigh E. Catchings as the primary point of contact.

General Info

Single-source power supply repair contract for unique part, no commercial alternatives, no intellectual property rights.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts

Full Description

Show more
NSN 7H-6130-015469882, TDP VER 002, QTY 1 EA, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000, INDUCTION NIIN IS 7H, 6130, 015469882, POWER SUPPLY, 4801682. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Award will be made only if the offeror, the product/service, or the manufacturer meets the qualification requirement(s) at time of award, in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
Federal
49--CABLE ASSY TORPEDO,, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC34
The contract solicitation is for a flight-critical cable assembly used in torpedo repair and modification, identified by NSN 7R-4920-015824377-HT, with a quantity of six units to be delivered FOB origin. This item requires exclusive sourcing from previously government-approved suppliers due to proprietary engineering designs, specialized manufacturing and repair capabilities, and technical data that are not economically available to the government. Only sources already validated by the design control activity have been solicited, as alternative suppliers cannot be qualified within the required timeframe without compromising mission readiness. Proposals from non-approved sources must include comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, detailing experience with identical or similar items or proof of prior submission for approval. Incomplete submissions will be rejected outright, and award may proceed based on Fleet support needs if source approval cannot be finalized in time. The government has determined this requirement does not fall under FAR Part 12 commercial item acquisition policies, but offers are open for commercial item alternatives if submitted within 15 days. Technical documentation referenced for compliance is accessible through ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not available via these channels. All proposals must be submitted by the response deadline of September 21, 2026, with primary point of contact being Christopher Campellone of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
HFP Multifunctional Device (MFD) Support and
Solicitation # OMASITHFPMFD01
The FDA Human Foods Program is soliciting a contractor to provide on-site maintenance and support for Konica Minolta Bizhub “4” and “8” model multifunctional devices, as well as new Bizhub “0” model MFDs, across six of its building locations in Maryland. This requirement stems from a prior reduction in coverage under a one-year contract awarded in 2025 due to budget constraints, and now seeks to reinstate comprehensive service with a base contract and one optional year. The MFDs are critical to high-volume office operations, handling substantial volumes of photocopying, printing, and scanning tasks across various document types. Only an original equipment manufacturer authorized service provider using genuine Konica Minolta parts and employing certified, trained technicians on OEM hardware will be considered. The contract requires strict adherence to manufacturer specifications to ensure reliability and performance under heavy usage. The solicitation, numbered OMASITHFPMFD01, was posted on August 5, 2026, with a response deadline of August 14, 2026, and is managed by the Omas Strategic Buying Center – Information Technology under the Department of Health and Human Services. The contract will cover 44 MFDs located at sites in Maryland, with performance centered at 17776, Rockville, MD 20740. The NAICS code for the opportunity is 811210, indicating office administrative services, and no small business set-aside is applicable. Primary point of contact for inquiries is Raja Seshadri, reachable by phone or email, with Laura Grey as the secondary contact. The contract must be awarded through a full and open competition and all service providers must demonstrate valid OEM authorization and proven technical certification for Konica Minolta equipment.
Omas Strategic Buying Center - Information Technology

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010425QDE08
This contract solicitation from the Department of Defense, specifically NAVSUP Weapon Systems Support Mech, concerns the repair and modification of a circuit card assembly, identified by the Cage Code 072E5 and reference number 1715296-101. The contract outlines strict repair and quality standards, requiring all work to comply with the contractor’s approved repair practices, MIL-STD-130 marking, and adherence to original manufacturer's specifications. The Government requires a Repair Turnaround Time (RTAT) of 67 days, with Government Source Inspection mandatory, and all freight terms are FOB Origin with freight managed via the Navy’s Commercial Asset Visibility (CAV) system. The contractor must report all receipts and inspections accurately within specified timeframes and has to accommodate potential teardown and evaluation fees if the asset is deemed beyond repair. The award will be firm-fixed-price or negotiated not-to-exceed terms, with specific clauses addressing substitutions or design changes under strict Government approval. The contract includes comprehensive documentation requirements, citing a series of military standards and specifications available through the Department of Defense Single Stock Point or other government channels, with guidelines on handling classified and distribution-restricted materials. Amendments have extended the offer due date multiple times, currently set at January 9, 2026, and have adjusted quantities slightly. The solicitation stresses the importance for offerors to provide detailed quotes including pricing and RTAT, along with all relevant administrative data like Return Material Authorization numbers and delivery vehicles. All terms emphasize rigorous quality assurance, packaging, and marking protocols, with a complete trail of inspection records required for one year following final delivery. The contracting officer and primary point of contact for this solicitation is Sarah Haley, reachable via provided contact details.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 811210
New
Federal
J066--Eye Laser & Cryostat Service Agreement POP: 9/1/2026-8/31/2031
Solicitation # 36C25926Q0646_0001
This contract is a firm-fixed price Indefinite-Delivery Indefinite-Quantity (IDIQ) agreement for Eye Laser and Cryostat Service and Support, issued as a Request for Quote (RFQ) by the Department of Veterans Affairs Network Contracting Office 19 in support of the Montana VA Health Care System. The period of performance spans five years from September 1, 2026, to August 31, 2031, with options to extend services for up to an additional six months. Services are to be performed at VA facilities in Fort Harrison and Billings, Montana, and include preventive and corrective maintenance for Alcon Centurian Vision lasers, Lumenis Selecta Trio lasers, and Leica CM1860 cryostats, with each line item covering a one-year base period and multiple option years. The contract is a total small business set-aside exclusively for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSBs), requiring full compliance with SBA regulations and VA-specific limitations on subcontracting. Offerors must submit a four-volume proposal detailing capability, price, past performance, and subcontracting compliance, with pricing provided via Attachment 1 and certifications via Attachments 2 and 3. The evaluation follows a best-value approach, prioritizing price reasonableness, responsibility, capability to meet the Statement of Work, and satisfactory past performance, with the lowest-priced responsible offeror favored if all pass/fail gates are cleared. The contract imposes extensive operational, security, and compliance requirements. All contractor personnel must undergo background investigations per VA Directive 0710 and comply with VAAR 852.204-72 personnel vetting provisions. Cybersecurity obligations include adherence to Executive Order 14028 and NIST guidelines, with mandatory self-attestation and inclusion of IT security clauses such as VAAR 852.239-71 and 852.239-75. Technical services must conform to industry standards from AAMI, ANSI, FDA, CDC, ISO, OSHA, TJC, and VHA directives, with performance measured against strict quality benchmarks: 100% conformance to SOW and OEM specifications, 95% equipment up-time, 90% response to service requests within two business hours, and satisfactory staffing qualifications. Invoicing must be submitted electronically through designated VA portals monthly in arrears, and payments will be processed by the
Network Contract Office 19 (36C259)

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811210
New
Federal
59--COUPLER,ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA99
The contract pertains to a flight-critical antenna coupler item identified by NSN 7R-5985-014876188-QF, with a quantity of four units to be delivered FOB origin. The Government has determined that full and open competition is not feasible, and the item may only be procured from previously approved sources due to unique design capabilities, proprietary manufacturing and repair knowledge, and insufficient technical data to support alternative sourcing. Engineering source approval by the design control activity is mandatory, and only sources previously vetted and approved by the Government have been solicited. Any entity not already approved must submit comprehensive qualification data in accordance with NAVSUP Weapon Systems Support Source Approval Information Brochures, and failure to provide complete documentation will disqualify the proposal. The item is essential to fleet readiness, and award may proceed even if source approval requests are pending, based on operational necessity. The procurement is conducted under FAR 6.302-1 as a sole-source action, though interested parties may submit proposals within 45 days, with a deadline of September 21, 2026. All award decisions are subject to compliance with FAR clause 52.209-1 and the requirement that offerors, products, or manufacturers meet all qualification standards at the time of award. This acquisition is subject to applicable Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as governed by DFARS clauses 252.225-7036 and 252.225-7021, which may impact origin and pricing determinations. Technical specifications, drawings, and related military standards are accessible through ASSIST-Online or the DODSSP, but patterns, deviation lists, and purchase descriptions are not available through these channels. All contractual documents are deemed issued upon electronic transmission or mailing by the Government, and acceptance of the proposal constitutes mutual agreement to these terms. The point of contact for additional information is Danielle M. Junod of the Navy Supply Systems Command in Philadelphia, PA, and the procurement is managed under solicitation number N0038326QLA99. The Government retains full discretion to determine whether to pursue competition based on responses to this presolicitation notice, and awards will be made exclusively to qualified sources capable of meeting the stringent technical and approval requirements for this critical component.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
49--NRP,ANTENNA COUPLER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLB00
The contract solicitation pertains to the repair or modification of an antenna coupler identified by NSN 7R-4920-016010099-E8, with a quantity of two units, to be delivered FOB origin. This acquisition is restricted to previously approved government sources due to the flight-critical nature of the item and the unavailability of adequate technical data to support open competition. Only sources previously vetted and approved by the Government, specifically through the design control activity, are eligible to respond, as they possess proprietary engineering capabilities, manufacturing knowledge, and technical data essential to maintaining part quality and performance. Alternate sources must undergo a rigorous qualification process approved by the cognizant Government engineering activity, and failure to meet these requirements will result in disqualification. Proposals must include all information specified in the NAVSUP Weapon Systems Support Source Approval Brochures for spares or repair, and applicants must provide documentation showing previous submission of required data if their approval request is pending. Offers lacking complete documentation or evidence of prior submission will not be considered. The procurement is being conducted under FAR 6.302-1 as a sole-source action, with the Government retaining full discretion over whether to pursue competitive bidding based on responses received within 45 days of posting or 30 days if under an existing Basic Ordering Agreement. Interested parties may express capability, but no competitive award will be made unless the offeror, product, or manufacturer qualifies at time of award per FAR 52.209-1. Technical specifications and standards are obtainable through ASSIST-Online or DODSSP, though patterns, drawings, and deviation lists are not available through these channels. The acquisition is not conducted under FAR Part 12 commercial item procedures, although vendors may submit within 15 days if they can provide a commercial item meeting requirements. Applicable trade clauses include the Buy American Act–Free Trade Agreements and the World Trade Organization Government Procurement Agreement, potentially affecting eligibility and pricing. The point of contact for additional information is Danielle M. Junod of NAVSUP Weapon Systems Support in Philadelphia, PA.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
FLANGE,4",WN,SCH40
Solicitation # N0010426QED05
This contract pertains to the procurement of a 4-inch weld-neck flange with schedule 40 specifications under solicitation N0010426QED05, issued by the Naval Supply Systems Command Weapon Systems Support Mechanism. The contract mandates strict compliance with technical, quality, and packaging requirements governed by the Individual Repair Part Ordering Data (IRPOD), which takes precedence over other documents in case of conflict, followed by the schedule, terms and conditions, and referenced military specifications. Contractors must adhere to all cited revision levels of drawings and standards, and any deviation or waiver must be formally requested with detailed justification, including evidence that proposed changes will not affect the form, fit, or function of the part. Mercury or mercury-containing compounds are strictly prohibited from contact with supplied hardware. All inspection and test reports must be submitted electronically via Wide Area Workflow (WAWF), and pre-manufacturing procedures, drawings, and qualifying documentation must be submitted within 45 days of contract award to the designated contracting office. Packaging must comply with MIL-PRF-23199, particularly concerning cleanliness control requirements, and the use of MIL-DTL-24466 green poly bags is permitted only under specific conditions outlined in the IRPOD. The contract enforces mandatory cybersecurity maturity model certification, small business representation, and equal opportunity requirements for veterans and workers with disabilities. All contractual documents are considered issued upon electronic transmission, and pricing validity is set at 60 days unless otherwise specified. Technical data, including drawings and specifications, are marked NOFORN and subject to export control with prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Distribution of deliverables follows strict DoD distribution statement codes, particularly F, restricting release without explicit authorization. Contractors must submit separate packages for each contract line item, including certified reports of test and inspection and pre-manufacturing documentation per DI-QCIC-8871 and DI-QCIC-8872 standards. The place of performance is not specified, and the point of contact for inquiries is listed as a Navy procurement representative. The contract requires compliance with priority rating provisions for national defense and energy programs, and all submissions are governed by detailed formatting and submission guidelines outlined in DD Form 1423 instructions, including data item descriptions, approval codes, and delivery frequencies.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333618
New
Federal
SENSOR ASSY, ESM
Solicitation # N0010426QQC34
This contract solicitation, issued under Emergency Acquisition Authority, seeks repair services for the SENSOR ASSY, ESM under a firm-fixed-price arrangement with a required Repair Turnaround Time of 59 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All repairs must comply with the original manufacturer’s technical specifications and drawings, and are subject to Government Source Inspection. The contractor is required to adhere to MIL-STD-130 Rev N for marking, and any design, material, or part number changes beyond a Code 1 modification must receive prior written approval from the Naval Integrated Contracting Center. The contract mandates strict quality assurance procedures, including comprehensive inspection records retained for 365 days post-delivery, and imposes financial penalties per unit per month for delays beyond the agreed RTAT, up to a specified maximum, without limiting the Government’s right to terminate for default. Freight is FOB Origin and managed by the Navy under the Commercial Asset Visibility Statement of Work. The solicitation requires detailed pricing submission with unit and total repair costs, and if pricing deviates from historical levels, contractors must justify their rates and provide comparable invoices or NSNs for similar items. A T&E fee may be negotiated if the asset is deemed beyond repair, capped at a government-determined NTE amount. The contract includes an optional quantity increase provision, exercisable within the timeframe of FAR 52.217-6, and enforces Small Business Subcontracting Plan requirements. Contractors must prove authorization as a distributor of the original manufacturer’s item, and the award is bilateral, requiring explicit acceptance before execution. The item falls under NAICS code 333618 and is governed by multiple federal acquisition regulations, cybersecurity maturity certifications, and security exclusions, with all applicable documentation subject to strict distribution controls and official-use-only handling protocols.
Other Engine Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334417
New
Federal
SWITCH CONNECT ASSY
Solicitation # N0010426QEC97
The procurement pertains to the SWITCH CONNECT ASSY with solicitation number N0010426QEC97, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, with responses due by September 4, 2026. The contract mandates strict compliance with the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and serves as the primary technical reference. Technical documentation, including drawings, specifications, and STRs, must be obtained from the BPMI e-Commerce portal using pre-registered credentials, and all cited documents must be used in their entirety at the specified revision levels unless formal approval is granted to deviate. Order of precedence is clearly defined, with contract amendments and schedule provisions taking priority over referenced standards. All items must adhere to cleanliness controls as outlined in MIL-STD-767, MIL-STD-2041, and related directives, with packaging governed by MIL-PRF-23199 where applicable; use of MIL-DTL-24466 green poly bags is conditional on specific cleanliness requirements and cannot override contract-specified alternatives. Mercury or mercury-containing compounds are strictly prohibited in contact with delivered hardware. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain and make available all inspection records to the government throughout contract performance and beyond. The contract includes mandatory compliance with cybersecurity maturity model certification, veteran and disability Equal Opportunity provisions, small business program representations, and the annual representations and certifications deviation, all effective February 2026. A stop-work order clause, security prohibitions, and export controls are invoked with a NOFORN designation on all technical documents, requiring prior approval from the Naval Sea Systems Command for any transmission to foreign nationals. Delivery is governed by FOB destination terms, pricing is valid for 60 days after the closing date unless otherwise specified, and contractual documents are deemed issued upon electronic transmission. The material must be delivered with a Certificate of Compliance per DI-MISC-81356, submitted at the time of delivery for each unique contract line item. Technical data deliverables are specified via DD Form 1423 with detailed requirements for submission frequency, approval codes, distribution statements, and pricing groups aligned with DoD guidelines. All communications and documentation must flow through designated points of contact, and any deviation, waiver, or request for extension must include justification and supporting technical data, submitted initially to the Government Quality Assurance Representative for review and forwarding to the Post
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB44
The contract pertains to the procurement of two circuit card assemblies identified by NSN 7H-5998-012568665-GL and part number 6710074-1, with a total quantity of 29 units to be delivered to two DLA distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The Government does not hold the intellectual property rights or technical data necessary to source repairs or replacements from alternative suppliers, and it has determined that acquiring such rights or reverse engineering the component is uneconomical, necessitating exclusive procurement from the original manufacturer. The solicitation is being conducted under FAR 6.302-1 as a sole-source action, with no obligation to compete, though responsible sources may submit capability statements to inform the Government's decision. The acquisition is structured as a Small Business Set Aside, with award contingent on the offeror, product, or manufacturer meeting all qualification criteria at the time of award as outlined in FAR 52.209-1. Technical specifications and standards referenced are accessible via ASSIST-Online or DODSSP, though drawings, patterns, and deviation lists are not available through these channels. The Government is not applying commercial items acquisition policies under FAR Part 12 but invites interested parties to propose commercial alternatives within 15 days. The acquisition is subject to trade agreements, including the Buy American Act—Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as implemented through applicable DFARS clauses. The solicitation number is N0010426QDB44, issued by the Naval Supply Systems Command Weapon Systems Support, with responses due by September 8, 2026, and primary contact information provided for inquiries.

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,POWER DISTRIB
Solicitation # N0010426QND94
This contract involves the repair and quality assurance of the PANEL,POWER DISTRIB under emergency acquisition flexibilities, with a firm-fixed-price structure and a mandatory 180-day repair turn-around time (RTAT). Contractors must submit detailed quotes including teardown and evaluation costs, estimated new part pricing, and full repair cost breakdowns, with all repairs requiring final government inspection and acceptance within the stipulated RTAT. Failure to meet RTAT triggers per-unit price reductions and may result in termination for default. The work must adhere strictly to specified military standards including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and the Defense Priorities and Allocations System (DPAS) rating, with no metallic mercury allowed unless written approval is granted, along with strict contamination controls and warning plates for approved exceptions. All repairs must be performed in line with approved technical documentation tied to specific CAGE codes and reference numbers, and any design, material, or part number changes require prior written approval from the contracting officer under specified Code classification systems. The contractor is fully responsible for quality assurance, record retention for 365 days post-delivery, and subcontractor compliance, including certification of authorized distributor status. Cybersecurity maturity thresholds apply, along with mandatory compliance with small business subcontracting, veteran and disability equity requirements, and Navy-specific workflow systems. Delivery to the Mechanicsburg, PA location is required, and all documentation must reflect NOFORN and distribution statement codes as mandated. Quotes must explicitly note any deviations from solicitation terms, and the award will be bilateral, contingent on written contractor acceptance following submission.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
58--BLANKET,TYPE 6
Solicitation # N0010426RUC18
The contract is for the procurement of 70 units of a Type 6 Blanket with NSN 1H-5840-014379525-A5, to be delivered FOB origin, under a sole-source acquisition authorized by FAR 6.302-1 due to the specialized nature of the part. Engineering source approval is mandatory, as only the qualified source possesses the unique design capability, proprietary manufacturing knowledge, and technical data essential to maintaining the part's quality and performance. Alternate sources must undergo formal qualification through the design control activity and obtain approval from the cognizant Government engineering authority, ensuring that any replacement meets exacting standards. The Government does not have access to the underlying technical data or manufacturing processes, which are retained by the approved source and are not economically feasible to duplicate. The solicitation is non-competitive, but responsible parties may submit capability statements within 45 days of publication, or 30 days if an existing Basic Ordering Agreement applies, to demonstrate their ability to meet requirements. All award determinations are contingent on the offeror, product, or manufacturer meeting qualification criteria at the time of award per FAR clause 52.209-1. Commercial item policies under FAR Part 12 do not apply, though interested parties may indicate within 15 days if they can provide a commercial item that satisfies the requirement. Technical documentation such as drawings and specifications is not available through DODSSP but may be accessed via ASSIST-Online or requested through the DODSSP Help Desk. The activity is managed by the Navsup Weapon Systems Support Mechanic office in Mechanicsburg, PA, with Leigh E. Catchings as the primary point of contact.

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEU
The contract is for the procurement of three solenoid valves, NSN 7H-4810-015103809, model S9515-AL-MMA-010, designated as item 12 under the technical data package version 003, to be delivered to DLA Distribution Norfolk, Virginia. The Government does not hold the data or intellectual property rights necessary to source this part from alternative suppliers, and it has been determined that acquiring such rights or reverse engineering the component is uneconomical. This item is uniquely sourced, and no competing sources exist due to proprietary restrictions. The Government intends to award this contract on a sole-source basis under FAR 6.302-1, but responsible parties may still submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement. All submissions will be evaluated solely to inform the decision on whether competitive procurement is feasible. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as defined by FAR clause 52.209-1. The contracting office is Navsup Weapon Systems Support Mech located in Mechanicsburg, Pennsylvania, with Dianne Wydra as the primary point of contact. The solicitation is issued as a Small Business Set Aside under the SBA program, and any participant must qualify as a small business to be eligible. Access to military specifications and related standards is available through ASSIST-Online or DODSSP, though critical documents such as drawings and deviation lists are not available through these channels.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335311
New
Federal
CABLE, MOTOR POWER
Solicitation # N0010426QNE05
This contract pertains to the manufacture of the CABLE, MOTOR POWER under solicitation N0010426QNE05, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is subject to Emergency Acquisition Flexibilities and will be awarded bilaterally, requiring the contractor’s written acceptance before execution. All contractual documents are considered issued upon electronic transmission, including email. The specification mandates compliance with drawing 8630046-2 and incorporates key military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality systems. The item must be mercury-free, with any use of metallic mercury requiring prior written approval and strict containment protocols to prevent contamination, particularly due to its corrosive and toxic risks in submarine and surface ship environments. Vendors must be certified under NAVSEA S9320-AM-PRO-020/MLDG, and each delivered assembly must include a certified Test Inspection Report. The contract imposes rigorous quality assurance obligations, requiring the contractor to maintain a government-acceptable quality system and assume full responsibility for inspection and compliance, regardless of whether government inspections are conducted. Inspection records must be retained for four years after final delivery. Packaging must follow MIL-STD-2073, and all subcontractors must adhere to the same requirements. The solicitation is set aside for small businesses and includes mandatory representations and certifications regarding veterans’ employment, workers with disabilities, Buy American provisions, and cybersecurity maturity levels. Payment will be processed via Wide Area Workflow with receiving report and invoice combo. The contractor must submit all configuration changes, deviations, or waivers through formal channels to the Contracting Officer, and unauthorized modifications are at the contractor’s sole risk. Offers are evaluated with consideration of past performance, and access to restricted documents requires authorization through designated government contacts. The response deadline is September 4, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PORT ADAPTER TEE
Solicitation # N0010426QEC57
The contract pertains to the procurement of a Port Adapter Tee, identified by part number 6 AOG5JG5-M, manufactured by Parker Hannifin Corp (CAGE 30780), under solicitation N0010426QEC57 with a response deadline of September 4, 2026. The requirement stipulates strict adherence to specified design, material, and dimensional criteria, with no accompanying technical drawings or data beyond the part number, and mandates full compliance with referenced standards including MIL-PRF-23199 packaging specifications and the exclusion of mercury or mercury-containing compounds. The order of precedence for technical conflicts is clearly defined, prioritizing contract amendments and schedule provisions over internal standards and drawings. Contractors must comply with exact document revisions unless approved otherwise and are prohibited from mixing partial revisions; deviations or delays require detailed justification and prior written approval from the Contracting Officer, including evidence that any proposed changes do not compromise form, fit, function, or quality. The contract enforces rigorous quality assurance, requiring the contractor to maintain a government-acceptable inspection system with complete records available throughout performance and beyond. Packaging must conform to MIL-PRF-23199, with specific clarification that MIL-DTL-24466 green poly bags are only permissible when cleanliness controls from specified standards such as MIL-STD-767 or MIL-STD-2041 apply, and fire-retardant materials are no longer required. Compliance reporting mandates submission of a Certificate of Compliance per DI-MISC-81356 with each delivery, tied to the contract number, NSN, and item nomenclature. The procurement is subject to mandatory compliance with cybersecurity maturity model certification, small business representation, veteran and disability equal opportunity provisions, and national defense priority ratings. All contractual documents are deemed issued upon electronic transmission, pricing is valid for 60 days post-closing unless otherwise specified, and use of Wide Area Workflow Payment Instructions and Workflow Pro Assist Module is required. The place of performance is unspecified, but the awarding office is NAVSUP WSS-MECH, located in Mechanicsburg, PA, with Alexander E. Jones listed as the point of contact.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
SENSOR CABLE
Solicitation # N0010426QED00
The contract pertains to the procurement of a sensor cable identified by part number 07030417-21, furnished by DRS Training & Control Systems, LLC, under a fixed-price arrangement issued by NAVSUP Weapon Systems Support Mech. All technical requirements are fully captured by the part number and referenced ordering data, with no additional drawings or technical documentation provided. The supplier must comply with strict manufacturing, material, and dimensional specifications as outlined in the contract, including the complete exclusion of mercury or mercury-containing compounds. Quality assurance mandates that the contractor maintain an inspection system acceptable to the government, with full records preserved throughout performance and beyond. Packaging must conform to MIL-PRF-23199 and related standards, with specific clarification on the use of MIL-DTL-24466 green poly bags only when cleanliness controls from cited documents are invoked, and fire-retardant materials are no longer required. Delivery and compliance timelines are tied to the end of contract date, requiring a Certificate of Compliance per DI-MISC-81356 to be submitted with material delivery, ensuring each unique contract line item is documented separately. Pricing for the quotation is valid for 60 days post-closing unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission, including email or fax. The contract incorporates numerous standardized clauses, including mandatory use of Workflow Pro, cybersecurity maturity certification requirements, small business representations, equal opportunity provisions for veterans and workers with disabilities, security exclusions, priority rating for national defense, and transportation by sea. Document conflict resolution follows a hierarchical order, with contract amendments superseding all other sources. Deviations or waivers must be formally requested in advance, supported by technical justification and impact assessments, and reviewed by the Government Quality Assurance Representative prior to approval. Commercial specifications referenced are obtained from external publishers, and all provided government documents include a distribution statement indicating usage limitations. Data submission requirements, as specified on DD Form 1423, define delivery frequency, approval codes, and pricing groups, with submission dates aligned to contract closure. The solicitation is open for response until September 4, 2026, with primary point of contact listed for inquiries.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
Federal
SHAFT,SHOULDERED
Solicitation # N0010426QFA75
This contract solicitation (N00104-26-Q-FA75) issued by the Department of Defense through Navsup Weapon Systems Support targets the supply of a shoulder shaft component critical for naval shipboard systems. The material and workmanship involved are designated as Special Emphasis Material (Level I, Scope of Certification, or Quality Assured) due to their application in life-critical ship systems where failure could result in severe damage or loss of life. Consequently, the contract imposes stringent quality assurance, traceability, and certification requirements applicable from raw material sourcing and manufacturing processes through final delivery. Compliance with applicable military, federal, and commercial specifications and standards is mandatory, including reference to specific Navy drawings, welding and brazing procedures, thread inspection protocols, and traceability markings per MIL-STD-792 and associated Navy specifications. Certifications must accompany all material and fabrication processes, requiring submission through authorized electronic means (WAWF), with no shipment allowed prior to government acceptance. Inspection and acceptance will be performed by authorized government representatives either at the contractor’s facility or at the specified destination (Portsmouth Naval Shipyard, Kittery, ME), with detailed guidance on lot inspection, material verification, and non-destructive testing compliance provided in the contract. The contractor must maintain documented quality systems aligned with ISO 9001 and related calibration standards, along with robust supplier control and subcontractor evaluation programs. Packaging and marking requirements comply with MIL-STD-2073 and MIL-STD-129 to ensure safe transport, effective identification including Unique Item Identification (UII), and adherence to hazardous material regulations where applicable. Special contract clauses include provisions for small business set-asides, warranty of supplies, and adherence to Federal Acquisition Regulation (FAR) and Defense FAR Supplement (DFARS) requirements, including cybersecurity mandates for safeguarding controlled defense information. Award evaluation will emphasize past performance and price, with the government reserving the right to make a best-value determination based on these factors. The overall contract performance period is 365 days after receipt of order, with FOB destination delivery terms.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334412
New
Federal
SYNTHESI ER ASSY.
Solicitation # N0010426QJB73
This contract pertains to the repair of the SYNTHESI ER ASSY. under solicitation N0010426QJB73, with a required turnaround time of 80 days from physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system. All repairs must comply with the contractor’s approved technical standards, manufacturer specifications, and MIL-STD-130 marking requirements, with no substitutions permitted without written government approval. Inspection and testing are the contractor’s responsibility and must align with original design documentation, and the Government retains the right to conduct independent inspections. Pricing must be firm, inclusive of all costs related to repairs on potentially damaged, incomplete, or worn assets, and must reflect current market or historical pricing, with documentation required for any deviations. If the item is deemed beyond repair, a test and evaluation fee, not to exceed a specified amount, may be negotiated. The contract mandates compliance with ISO9001 quality standards, requires adherence to cybersecurity maturity certification levels, and enforces strict security prohibitions and data handling protocols per DOD directives. All documentation provided by the Navy carries distribution restrictions, and only authorized distributors of the original manufacturer may submit offers, requiring proof of authorization. Freight is FOB Origin, with the Navy handling all logistics through the Commercial Asset Visibility system, and the contractor must accurately report all receipt and transaction dates within five business days. Payment instructions follow the Wide Area Workflow system, and contract execution requires bilateral acceptance. The awardee must provide their CAGE code, facility location, and confirm whether inspection and acceptance will occur at the same or separate location. Pricing must be compared against the cost of purchasing a new unit, with current new unit price and lead time included in the quotation. Records of all inspections and repair activities must be retained for 365 days after final delivery. The solicitation explicitly excludes any deviation from the required turnaround time unless accompanied by a clear justification of capacity constraints. Contractors must verify nomenclature, part number, and NSN prior to quoting, and the response deadline is August 7, 2026. All materials must conform to applicable military and federal standards, and unauthorized distribution of government-provided technical data is prohibited.
Bare Printed Circuit Board Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details