Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

65--Small Fragment Fixation System Stainless Steel and Titanium Iplant Devices

Active
VA25714Q1690Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs in South Texas, VISN 17, plans to enter into a sole-source purchase agreement with DEPUY SYNTHES SALES INC for the procurement of specialized Stainless Steel and Titanium implant devices used by the STVHCS Nursing Services. This procurement is justified under FAR 6.302-1(a)(2)(ii)(A) because DEPUY SYNTHES is considered the only responsible source capable of providing these specific implant devices, which span a wide range of screw sizes, plates, wires, and related surgical instruments. The contract includes various quantities of cortex screws, shaft screws, cancellous bone screws (both fully and partially threaded), locking screws, Kirschner wires, locking compression plates (LCP), reconstruction plates, specialized tools such as drills, taps, screwdrivers, forceps, and bending irons, covering an extensive inventory required for orthopedic surgical procedures. This notice of intent, posted on September 2, 2014, is not a solicitation or an invitation for competition but serves to inform that the government is exercising discretion in issuing a sole-source contract, provided no compelling evidence supports the advantage of competition. Interested parties had until 12 P.M. CST on September 5, 2014, to respond with clear and convincing reasons why competition might benefit the government. The procurement falls under NAICS code 339113 and is managed by the NETWORK Contract Office 17 in San Antonio, Texas. If no valid challenges are received, the South Texas Veterans Health Care System will proceed with contracting DEPUY SYNTHES SALES INC exclusively for these specialized implant devices and related orthopedic instrumentation.

General Info

Sole-source contract with DEPUY SYNTHES for specialized orthopedic implants at STVHCS.

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

TX

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)
ContactsNo contacts available
OfficeSan Antonio, TX, 78240, USA
Organization / AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)
Office AddressSan Antonio, TX, 78240, USA
ContactsNo contact information available

Full Description

Show more
The Department of Veterans Affairs in South Texas, VISN 17, intends to negotiate a sole-source purchase order with DEPUY SYNTHES SALES INC, to purchase specialized Stainless Steel and Titanium implant devices for STVHCS Nursing Services. This requirement includes the following listed items below: NAICS: 339113. Justification for this sole source procurement is in accordance with FAR 6.302-1(a) (2) (ii) (A), only one responsible source. This notice of intent is not a request for competitive proposals. It is not a solicitation or request for offers. A determination not to compete is solely within the discretion of the Government. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. If no valid responses are received, the South Texas Veterans Health Care System will proceed with the intended sole source contract. Responses must be received no later than 12:00 P.M. CST on 9-5-2014. Inquiries can be emailed to contact@example.gov, Subject: 674-14-2-3484-056, Stainless Steel and Titanium Implant Devices 1 2.7 CORTEX SCREW SELF TAPPING LOCAL STOCK NUMBER: 202.810 - 3.00 EA 2 2.7MM CORTEX SCREW SELF TAPPING 12MM LOCAL STOCK NUMBER: 202.812 - 3.00 EA 3 2.7MM CORTEX SCREW SELF TAPPING 14MM LOCAL STOCK NUMBER: 202.814 - 3.00 EA 4 2.7MM CORTEX SCREW SELF TAPPING 16MM LOCAL STOCK NUMBER: 202.816 - 3.00 EA 5 2.7MM CORTEX SCREW SELF TAPPING 18MM LOCAL STOCK NUMBER: 202.818 - 3.00 EA 6 2.7MM CORTEX SCREW SELF TAPPING 20MM LOCAL STOCK NUMBER: 202.820 - 3.00 EA 7 2.7MM CORTEX SCREW SELF TAPPING 22MM LOCAL STOCK NUMBER: 202.822 - 3.00 EA 8 2.7MM CORTEX SCREW SELF TAPPING 24MM LOCAL STOCK NUMBER: 202.824 - 3.00 EA 9 2.7MM CORTEX SCREW SELF TAPPING 26MM LOCAL STOCK NUMBER: 202.826 - 3.00 EA 10 2.7MM CORTEX SCREW SELF TAPPING 28MM LOCAL STOCK NUMBER: 202.828 - 3.00 EA 11 2.7MM CORTEX SCREW SELF TAPPING 30MM LOCAL STOCK NUMBER: 202.830 - 3.00 EA 12 2.7MM CORTEX SCREW SELF TAPPING 32MM LOCAL STOCK NUMBER: 202.832 - 3.00 EA 13 2.7MM CORTEX SCREW SELF TAPPING 34MM LOCAL STOCK NUMBER: 202.834 - 3.00 EA 14 2.7MM CORTEX SCREW SELF TAPPING 36MM LOCAL STOCK NUMBER: 202.836 - 3.00 EA 15 2.7MM CORTEX SCREW SELF TAPPING 38MM LOCAL STOCK NUMBER: 202.838 - 3.00 EA 16 2.7MM CORTEX SCREW SELF TAPPING 40MM LOCAL STOCK NUMBER: 202.840 - 3.00 EA 17 2.7MM CORTEX SCREW SELF TAPPING 45MM LOCAL STOCK NUMBER: 202.845 - 3.00 EA 18 2.7MM CORTEX SCREW SELF TAPPING 50MM LOCAL STOCK NUMBER: 202.850 - 3.00 EA 19 2.7MM CORTEX SCREW SELF TAPPING 55MM LOCAL STOCK NUMBER: 202.855 - 3.00 EA 20 3.5MM SHAFT SCREW 16MM LOCAL STOCK NUMBER: 204.216 - 2.00 EA 21 3.5MM SHAFT SCREW 18MM LOCAL STOCK NUMBER: 204.218 - 2.00 EA 22 3.5MM SHAFT SCREW 20MM LOCAL STOCK NUMBER: 204.220 - 2.00 EA 23 3.5MM SHAFT SCREW 22MM LOCAL STOCK NUMBER: 204.222 - 2.00 EA 24 3.5MM SHAFT SCREW 24MM LOCAL STOCK NUMBER: 204.224 - 2.00 EA 25 3.5MM SHAFT SCREW 26MM LOCAL STOCK NUMBER: 204.226 - 2.00 EA 26 3.5MM SHAFT SCREW 28MM LOCAL STOCK NUMBER: 204.228 - 2.00 EA 27 3.5MM SHAFT SCREW 30MM LOCAL STOCK NUMBER: 204.230 - 2.00 EA 28 3.5MM SHAFT SCREW 32MM LOCAL STOCK NUMBER: 204.232 - 2.00 EA 29 3.5MM SHAFT SCREW 34MM LOCAL STOCK NUMBER: 204.234 - 2.00 EA 30 3.5MM SHAFT SCREW 36MM LOCAL STOCK NUMBER: 204.236 - 2.00 EA 31 3.5MM SHAFT SCREW 38MM LOCAL STOCK NUMBER: 204.238 - 2.00 EA 32 3.5MM CORTEX SCREW SELF-TAPPING 10MM LOCAL STOCK NUMBER: 204.810 - 6.00 EA 33 3.5MM CORTEX SCREW SELF-TAPPING 12MM LOCAL STOCK NUMBER: 204.812 - 6.00 EA 34 3.5MM CORTEX SCREW SELF-TAPPING 14MM LOCAL STOCK NUMBER: 204.814 - 6.00 EA 35 3.5MM CORTEX SCREW SELF-TAPPING 16MM LOCAL STOCK NUMBER: 204.816 - 6.00 EA 36 3.5MM CORTEX SCREW SELF-TAPPING 18MM LOCAL STOCK NUMBER: 204.818 - 6.00 EA 37 3.5MM CORTEX SCREW SELF-TAPPING 20MM LOCAL STOCK NUMBER: 204.820 - 6.00 EA 38 3.5MM CORTEX SCREW SELF-TAPPING 22MM LOCAL STOCK NUMBER: 204.822 - 6.00 EA 39 3.5MM CORTEX SCREW SELF-TAPPING 24MM LOCAL STOCK NUMBER: 204.824 - 6.00 EA 40 3.5MM CORTEX SCREW SELF-TAPPING 26MM LOCAL STOCK NUMBER: 204.826 - 6.00 EA 41 3.5MM CORTEX SCREW SELF-TAPPING 28MM LOCAL STOCK NUMBER: 204.828 - 6.00 EA 42 3.5MM CORTEX SCREW SELF-TAPPING 30MM LOCAL STOCK NUMBER: 204.830 - 6.00 EA 43 3.5MM CORTEX SCREW SELF-TAPPING 32MM LOCAL STOCK NUMBER: 204.832 - 6.00 EA 44 3.5MM CORTEX SCREW SELF-TAPPING 34MM LOCAL STOCK NUMBER: 204.834 - 6.00 EA 45 3.5MM CORTEX SCREW SELF-TAPPING 36MM LOCAL STOCK NUMBER: 204.836 - 6.00 EA 46 3.5MM CORTEX SCREW SELF-TAPPING 38MM LOCAL STOCK NUMBER: 204.838 - 6.00 EA 47 3.5MM CORTEX SCREW SELF-TAPPING 40MM LOCAL STOCK NUMBER: 204.840 - 6.00 EA 48 3.5MM CORTEX SCREW SELF-TAPPING 45MM LOCAL STOCK NUMBER: 204.845 - 6.00 EA 49 3.5MM CORTEX SCREW SELF-TAPPING 50MM LOCAL STOCK NUMBER: 204.850 - 6.00 EA 50 3.5MM CORTEX SCREW SELF-TAPPING 55MM LOCAL STOCK NUMBER: 204.855 - 4.00 EA 51 3.5MM CORTEX SCREW SELF-TAPPING 60MM LOCAL STOCK NUMBER: 204.860 - 4.00 EA 52 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 10MM LOCAL STOCK NUMBER: 206.010 - 4.00 EA 53 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 12MM LOCAL STOCK NUMBER: 206.012 - 4.00 EA 54 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 14MM LOCAL STOCK NUMBER: 206.014 - 8.00 EA 55 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 16MM LOCAL STOCK NUMBER: 206.016 - 8.00 EA 56 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 18MM LOCAL STOCK NUMBER: 206.018 - 8.00 EA 57 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 20MM LOCAL STOCK NUMBER: 206.020 - 8.00 EA 58 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 22MM LOCAL STOCK NUMBER: 206.022 - 4.00 EA 59 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 24MM LOCAL STOCK NUMBER: 206.024 - 4.00 EA 60 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 26MM LOCAL STOCK NUMBER: 206.026 - 4.00 EA 61 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 28MM LOCAL STOCK NUMBER: 206.028 - 4.00 EA 62 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 30MM LOCAL STOCK NUMBER: 206.030 - 4.00 EA 63 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 35MM LOCAL STOCK NUMBER: 206.035 - 4.00 EA 64 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 40MM LOCAL STOCK NUMBER: 206.040 - 4.00 EA 65 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 45MM LOCAL STOCK NUMBER: 206.045 - 4.00 EA 66 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 50MM LOCAL STOCK NUMBER: 206.050 - 4.00 EA 67 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 55MM LOCAL STOCK NUMBER: 206.055 - 4.00 EA 68 4.0MM CANCELLOUS BONE SCREW FULLY THREADED / 60MM LOCAL STOCK NUMBER: 206.060 - 4.00 EA 69 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 10MM LOCAL STOCK NUMBER: 207.010 - 4.00 EA 70 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 12MM LOCAL STOCK NUMBER: 207.012 - 4.00 EA 71 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 14MM LOCAL STOCK NUMBER: 207.014 - 4.00 EA 72 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 16MM LOCAL STOCK NUMBER: 207.016 - 4.00 EA 73 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 18MM LOCAL STOCK NUMBER: 207.018 - 4.00 EA 74 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 20MM LOCAL STOCK NUMBER: 207.020 - 4.00 EA 75 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 22MM LOCAL STOCK NUMBER: 207.022 - 4.00 EA 76 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 24MM LOCAL STOCK NUMBER: 207.024 - 4.00 EA 77 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 26MM LOCAL STOCK NUMBER: 207.026 - 4.00 EA 78 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 28MM LOCAL STOCK NUMBER: 207.028 - 4.00 EA 79 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 30MM LOCAL STOCK NUMBER: 207.030 - 8.00 EA 80 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 35MM LOCAL STOCK NUMBER: 207.035 - 8.00 EA 81 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 40MM LOCAL STOCK NUMBER: 207.040 - 8.00 EA 82 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 45MM LOCAL STOCK NUMBER: 207.045 - 8.00 EA 83 4.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED / 50MM LOCAL STOCK NUMBER: 207.050 - 8.00 EA 84 WASHER 7.0MM LOCAL STOCK NUMBER: 219.98 - 6.00 EA 85 1.25 KIRSCHNER WIRE W/TROCAR POINT 150MM LOCAL STOCK NUMBER: 292.12 - 1.00 EA 86 1.6 KIRSCHNER WIRE/W 5MM THREAD TROCAR POINT 150MM LOCAL STOCK NUMBER: 292.71 - 1.00 EA 87 2.0 KIRSCHNER WIRE W/TROCAR POINT 150MM LOCAL STOCK NUMBER: 292.20 - 1.00 EA 88 3.5MM LCP PLATE 5 HOLES 72MM LOCAL STOCK NUMBER: 223.551 - 2.00 EA 89 3.5MM LCP PLATE 6 HOLES 85MM LOCAL STOCK NUMBER: 223.561 - 2.00 EA 90 3.5MM LCP PLATE 8 HOLES 111MM LOCAL STOCK NUMBER: 223.581 - 2.00 EA 91 3.5MM LCP PLATE 9 HOLES 124MM LOCAL STOCK NUMBER: 223.591 - 2.00 EA 92 3.5MM LCP PLATE 10 HOLES 137MM LOCAL STOCK NUMBER: 223.601 - 2.00 EA 93 3.5MM LCP PLATE 12 HOLES 163MM LOCAL STOCK NUMBER: 223.621 - 2.00 EA 94 3.5MM LCP PLATE 14 HOLES 189MM LOCAL STOCK NUMBER: 223.641 - 2.00 EA 95 3.5MM LCP RECONSTRUCTION PLATE 5 HOLES 70MM LOCAL STOCK NUMBER: 245.051 - 2.00 EA 96 3.5MM LCP RECONSTRUCTION PLATE 6 HOLES 84MM LOCAL STOCK NUMBER: 245.061 - 2.00 EA 97 3.5MM LCP RECONSTRUCTION PLATE 7 HOLES 98MM LOCAL STOCK NUMBER: 245.071 - 2.00 EA 98 3.5MM LCP RECONSTRUCTION PLATE 8 HOLES 112MM LOCAL STOCK NUMBER: 245.081 - 2.00 EA 99 3.5MM LCP RECONSTRUCTION PLATE 10 HOLES 140MM LOCAL STOCK NUMBER: 245.101 - 2.00 EA 100 3.5MM LCP RECONSTRUCTION PLATE 12 HOLES 168MM LOCAL STOCK NUMBER: 245.121 - 2.00 EA 101 3.5MM LCP t-PLATE 3H HEAD/ 3H SHAFT/ 50MM RIGHT ANGLE LOCAL STOCK NUMBER: 241.131 - 1.00 EA 102 3.5MM LCP t-PLATE 3H HEADS/5H SHAFT/67MM RIGHT ANGLE LOCAL STOCK NUMBER: 241.151 - 1.00 EA 103 3.5MM LCP t-PLATE 3H HEAD/7H SHAFT/87MM RIGHT ANGLE LOCAL STOCK NUMBER: 241.171 - 1.00 EA 104 3.5MM LCP t-PLATE 4H HEAD /4H SHAFT/56MM RIGHT ANGLE LOCAL STOCK NUMBER: 241.141 - 1.00 EA 105 3.5MM LCP t-PLATE 4H HEAD/ 6H SHAFT/78MM RIGHT ANGLE LOCAL STOCK NUMBER: 241.161 - 1.00 EA 106 3.5MM LCP t-PLATE 3H HEAD/ 3H SHAFT/52MM OBLIQUE RIGHT LOCAL STOCK NUMBER: 241.031 - 1.00 EA 107 3.5MM LCP t-PLATE 3H HEAD/ 4H SHAFT/63MM OBLIQUE RIGHT LOCAL STOCK NUMBER: 241.041 - 1.00 EA 108 3.5MM LCP t-PLATE 3H HEAD 5H SHAFT/74MM OBLIQUE RIGHT LOCAL STOCK NUMBER: 241.051 - 1.00 EA 109 3.5MM LCP t-PLATE 3H HEAD/ 7H SHAFT /96MM OBLIQUE RIGHT LOCAL STOCK NUMBER: 241.071 - 1.00 EA 110 3.5MM LCP t-PLATE 3H HEAD 3H SHAFT 52MM OBLIQUE LEFT LOCAL STOCK NUMBER: 241.931 - 1.00 EA 111 3.5MM LCP t-PLATE 3H HEAD/ 4H SHAFT/63MM OBLIQUE LEFT LOCAL STOCK NUMBER: 241.941 - 1.00 EA 112 3.5MM LCP t-PLATE 3H HEAD/ 5H SHAFT/74MM OBLIQUE LEFT LOCAL STOCK NUMBER: 241.951 - 1.00 EA 113 3.5MM LCP t-PLATE 3H HEAD 7H SHAFT/96MM OBLIQUE LEFT LOCAL STOCK NUMBER: 241.971 - 1.00 EA 114 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 5 HOLES 57MM LOCAL STOCK NUMBER: 241.351 - 2.00 EA 115 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 6 HOLES/69MM LOCAL STOCK NUMBER: 241.361 - 2.00 EA 116 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 7 HOLES 81MM LOCAL STOCK NUMBER: 241.371 - 2.00 EA 117 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 8 HOLES 93MM LOCAL STOCK NUMBER: 241.381 - 1.00 EA 118 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 10 HOLES 117MM LOCAL STOCK NUMBER: 241.401 - 1.00 EA 119 LCP ONE-THIRD TUBULAR PLATE WITH COLLARS 12 HOLES 141MM LOCAL STOCK NUMBER: 241.421 - 1.00 EA 120 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 10MM LOCAL STOCK NUMBER: 212.101 - 5.00 EA 121 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 12MM LOCAL STOCK NUMBER: 212.102 - 5.00 EA 122 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 14MM LOCAL STOCK NUMBER: 212.103 - 5.00 EA 123 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 16MM LOCAL STOCK NUMBER: 212.104 - 5.00 EA 124 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 18MM LOCAL STOCK NUMBER: 212.105 - 5.00 EA 125 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 20MM LOCAL STOCK NUMBER: 212.106 - 5.00 EA 126 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 22MM LOCAL STOCK NUMBER: 212.107 - 5.00 EA 127 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 24MM LOCAL STOCK NUMBER: 121.108 - 5.00 EA 128 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 26MM LOCAL STOCK NUMBER: 212.109 - 5.00 EA 129 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 28MM LOCAL STOCK NUMBER: 212.110 - 5.00 EA 130 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 30MM LOCAL STOCK NUMBER: 212.111 - 5.00 EA 131 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 32MM LOCAL STOCK NUMBER: 212.112 - 5.00 EA 132 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 34MM LOCAL STOCK NUMBER: 212.113 - 5.00 EA 133 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS36MM LOCAL STOCK NUMBER: 212.115 - 5.00 EA 134 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 38MM LOCAL STOCK NUMBER: 212.116 - 5.00 EA 135 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 40MM LOCAL STOCK NUMBER: 212.117 - 4.00 EA 136 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 45MM LOCAL STOCK NUMBER: 212.119 - 4.00 EA 137 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 50MM LOCAL STOCK NUMBER: 212.121 - 4.00 EA 138 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 55MM LOCAL STOCK NUMBER: 212.123 - 4.00 EA 139 3.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE (TM) RECESS 60MM LOCAL STOCK NUMBER: 212.124 - 4.00 EA 140 2.0MM DRILL BIT /QC/125MM LOCAL STOCK NUMBER: 310.21 - 2.00 EA 141 2.5MM DRILL BIT/QC/GOLD/110MM LOCAL STOCK NUMBER: 310.25 - 2.00 EA 142 2.7MM THREE FLUTED DRILL BIT QC/125MM LOCAL STOCK NUMBER: 315.28 - 2.00 EA 143 2.8MM DRILL BIT/QC/165MM LOCAL STOCK NUMBER: 310.288 - 2.00 EA 144 3.5MM DRILL BIT/QC/110MM LOCAL STOCK NUMBER: 310.35 - 2.00 EA 145 COUNTERSINK F/3.5 CORTEX & 4.0MM CANCELLOUS BONE SCREWS LOCAL STOCK NUMBER: 310.89 - 1.00 EA 146 TAP FOR 3.5MM CORTEX SCREWS GOLD/110MM LOCAL STOCK NUMBER: 311.32 - 2.00 EA 147 TAP FOR 4.0MM CANCELLOUS BONE SCREWS /110MM LOCAL STOCK NUMBER: 311.34 - 2.00 EA 148 HANDLE W/ QUICK COUPLING SMALL LOCAL STOCK NUMBER: 311.43 - 1.00 EA 149 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE LOCAL STOCK NUMBER: 312.20 - 1.00 EA 150 3.5MM/2.5MM INSERT DRILL SLEEVE LOCAL STOCK NUMBER: 312.30 - 1.00 EA 151 2.8MM THREADED DRILL GUIDE LOCAL STOCK NUMBER: 312.648 - 4.00 EA 152 STARDRIVE SCREWDRIVER T15 LOCAL STOCK NUMBER: 314.115 - 1.00 EA 153 STARDRIVE SCREWDRIVER SHAFT QC/T15 LOCAL STOCK NUMBER: 314.116 - 1.00 EA 154 SMALL HEXAGENAL SCREWDRIVER WITH HOLDING SLEEVE LOCAL STOCK NUMBER: 314.02 - 1.00 EA 155 SMALL HEXAGENAL SCREWDRIVER SHAFT LOCAL STOCK NUMBER: 314.03 - 1.00 EA 156 DEPTH GUAGE FOR 2.7MM AND SMALL SCREWS LOCAL STOCK NUMBER: 319.01 - 1.00 EA 157 SHARP HOOK LOCAL STOCK NUMBER: 319.39 - 1.00 EA 158 SCREW FORCEPS LOCAL STOCK NUMBER: 319.97 - 1.00 EA 159 2.7 UNIVERSAL DRILL GUIDE LOCAL STOCK NUMBER: 323.26 - 1.00 EA 160 3.5 UNIVERSAL DRILL GUIDE LOCAL STOCK NUMBER: 323.36 - 1.00 EA 161 BENDING IRON FOR 2.7MM & 3.5 MM PLATES LOCAL STOCK NUMBER: 329.04 - 1.00 EA 162 BENDING IRON FOR 2.7MM & 3.5 MM PLATES LOCAL STOCK NUMBER: 329.05 - 1.00 EA 163 BENDING TEMPLATE 7 HOLES FOR 3.5MM LC-DCP & DCP PLATES LOCAL STOCK NUMBER: 329.87 - 1.00 EA 164 BENDING TEMPLATE 9 HOLES FOR 3.5MM LC-DCP & DCP PLATES LOCAL STOCK NUMBER: 329.89 - 1.00 EA 165 BENDING TEMPLATE 12 HOLES FOR 3.5MM LC-DCP & DCP PLATES LOCAL STOCK NUMBER: 329.820 - 1.00 EA 166 WIRE BENDING PLIERS 160MM LOCAL STOCK NUMBER: 391.82 - 1.00 EA 167 BENDING IRON FOR 1.25MM 1.6MM 2.0MM KIRSCHNER WIRES LOCAL STOCK NUMBER: 392.00 - 1.00 EA 168 REDUCTION FORCEPS WITH POINTS NARROW RATCHET 132MM LOCAL STOCK NUMBER: 398.40 - 1.00 EA 169 REDUCTION FORCEPS WITH POINTS BROAD RATCHET LOCAL STOCK NUMBER: 398.41 - 1.00 EA 170 BONE HOLDING FORCEPS SOFT RATCHET F/PLATES TO 9MM WIDE LOCAL STOCK NUMBER: 399.091 - 1.00 EA 171 SMALL HOHMAN RETRACTOR 8MM SHORT NARROW TIP 160MM LOCAL STOCK NUMBER: 399.19 - 2.00 EA 172 PERIOSTEAL ELEVATOR 6MM CURVED BLADE ROUND EDGE LOCAL STOCK NUMBER: 399.36 - 1.00 EA 173 HOHMAN RETRACTOR 15MM 160MM LOCAL STOCK NUMBER: 399.49 - 2.00 EA 174 REDUCTION FORCEPS W/ SERRATED JAW RATCHET 144MM LOCAL STOCK NUMBER: 399.99 - 2.00 EA 175 PLATE HOLDING FORCEPS W/ SWIVEL FOOT/SIZE 0 LOCAL STOCK NUMBER: 398.811 - 1.00 EA 176 BENDING IRON FOR 2.7 3.5 RECONSTRUCTION PLATES LOCAL STOCK NUMBER: 329.07 - 2.00 EA 177 1.6MM WIRE SLEEVE LOCAL STOCK NUMBER: 323.023 - 2.00 EA 178 DIRECT MEASURING DEVICE LOCAL STOCK NUMBER: 323.025 - 1.00 EA 179 THREADED PLATE HOLDER LOCAL STOCK NUMBER: 324.023 - 1.00 EA 180 THREADED PLATE HOLDER LONG FOR 3.5MM LOCKING HOLE LOCAL STOCK NUMBER: 324.031 - 1.00 EA 181 PUSH PULL REDUCTION DEVICE LOCAL STOCK NUMBER: 324.024 - 1.00 EA 182 SMALL FRAG LCP INSTRUMENT & IMPLANT SET GRAPHIC CASE LOCAL STOCK NUMBER: 690.347 - 1.00 EA 183 TORQUE LIMITING ATTACHMENT 1.5NM/QUICK COUPLING LOCAL STOCK NUMBER: 511.773 - 1.00 EA 184 3.5MM LCP PROXIMAL HUMERUS PLATE STANDARD 3H SHAFT /90MM LOCAL STOCK NUMBER: 241.901 - 1.00 EA 185 3.5MM LCP PROXIMAL HUMERUS PLATE STANDARD 5H SHAFT /114MM LOCAL STOCK NUMBER: 241.903 - 1.00 EA 186 INSERTION GUIDE LOCAL STOCK NUMBER: 323.050 - 1.00 EA 187 3.5MM LOCKING SCREW SLEEVE LOCAL STOCK NUMBER: 323.053 - 2.00 EA 188 2.8MM DRILL SLEEVE LOCAL STOCK NUMBER: 323.054 - 2.00 EA 189 1.6MM WIRE SLEEVE LOCAL STOCK NUMBER: 323.055 - 2.00 EA

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
Medical Device Supply (NSN 6530016456923)This subcontract involves the manufacture and supply of specific medical devices, identified by NSN 6530016456923, for prime contractors supporting DLA Medical contracts. The required devices must measure 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a lift-off cover and a securable cap. All items must adhere to Medical Marking Standard No. 1 and maintain strict compliance with FDA Regulation 880.5570 Class II. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 339113. Performance of the contract will take place in Fort Bliss, Texas. The solicitation was posted on October 29, 2026, with a response deadline set for November 5, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Disposable Plastic Inhaler Tube SupplierThis subcontract involves the manufacture and supply of clear, non-sterile, disposable plastic inhaler tubes for prime contractors supporting Department of Defense Medical Supply Chain projects. The required tubing must be 84 inches in length with force-fit flared tips, individually wrapped according to MIL-STD-2073-1E and Special Packaging Instructions MPPWN00001. Finished products are to be delivered in labeled packages of 50 tubes to the Naval Medical Readiness Logistics Command. Compliance is mandatory regarding the Buy American Act and DFARS 252.204-7012 cybersecurity standards. The performance of the contract is centered in Williamsburg, Virginia, under NAICS code 339113. Interested parties must adhere to the response deadline of November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supplier of Bartholin Gland CathetersThis subcontract involves the supply of sterile, disposable Bartholin gland catheters to prime contractors for the Department of Defense Medical Supply Chain. The required catheters must be 10 FR size and 5 cm in length, featuring 5 CC inflated latex balloons and including necessary needles and syringes. All products must strictly adhere to MIL-STD-2073-1E and Medical Marking Standard No. 1, with deliveries consisting of two packages of six catheters each under NSN 6515-01-254-4126. The opportunity is categorized under NAICS code 339113 and is designated for performance in Twentynine Palms, California. Interested parties must respond by November 4, 2026, following the posting date of October 29, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Sterile Nonadherent Pads (NSN 6510-00-986-2942)This subcontract involves the supply of sterile, nonadherent medical pads for prime contractors supporting Department of Defense supply contracts through the Medical Supply Chain MD Surg FSF. The required items are white nonwoven cotton pads measuring 3 inches by 8 inches, featuring a perforated plastic film covering on both sides. Each pad must be sterile and individually packaged, with final delivery occurring in packages of 50. All supplies must strictly adhere to the specifications for NSN 6510-00-986-2942 and maintain a minimum shelf life of 36 months from the date of delivery. The place of performance for this contract is located at Fort Bliss, Texas. The solicitation is categorized under NAICS code 339113, with a response deadline set for November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Shock-Resistant Aneroid Cuff SetsThis subcontract involves the supply of shock-resistant, latex-free reusable aneroid cuff sets designed for small adults to support prime contractors for the Department of Defense Medical Supply Chain. Each complete set must include a gear-free cuff-mounted aneroid gage, inflation tube, one-piece cuff, valve, and infiltration bulb. All units must be certified to an accuracy of +/- 3 mm HG and come with a five-year warranty. The contract requires strict adherence to the Buy American Act, the Berry Amendment, and Medical Marking Standard No. 1. Performance for this requirement is located at Fort Bliss, Texas, under NAICS code 339113. The response deadline for this opportunity is November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
Supply of Sterile Surgical Sponges (Versalon Blend)This subcontract involves the supply of 16,000 boxes of sterile, all-purpose surgical sponges to prime contractors supporting Department of Defense medical supply contracts through DLA Troop Support. The required sponges must be 4x4 inch, 4-ply, non-woven disposable products made from a Versalon rayon/polyester blend. These items must be latex-free, highly absorbent, and meet strict medical sterility standards for use in wound care, wiping, and prepping. The contract is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF agency, with the place of performance located at Fort Bliss, Texas. Interested parties should note the posting date of October 29, 2026, with a response deadline set for November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Nonmetallic Hose Assemblies (NSN 4720012681978)This subcontract involves the manufacture or sourcing of three nonmetallic hose assemblies, identified by NSN 4720012681978, for prime contractors working on DLA Weapons Support fluid handling projects. All deliverables must strictly comply with the specifications set by the DLA Fluid Handling Division, and logistics will be managed through the First Destination Transportation program. The project is managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, with the place of performance located in Jacksonville, Florida. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 339113.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
Supplier of Y-Type IV Administration SetsThis subcontract, managed by the Department of Defense Medical Supply Chain, requires the procurement of Y-Type administration sets for blood and solution delivery. The specified equipment must be 100 inches in length, featuring 170u filter pump chambers and two Luer Lock injection ports. All supplies must be delivered in packages of 48 units to Fort Bliss, Texas. The contractor must ensure full compliance with FDA medical device regulations, the DLA Master List, MIL-STD-129, and MIL-STD-2073-1E. Additionally, the provider is required to meet NIST SP 800-171 cybersecurity standards. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026, under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Casualty Response Documentation Tool (NSN 6515-01-575-2772)This subcontract involves the procurement or manufacture of 32 Casualty Response Documentation Tools, identified by NSN 6515-01-575-2772, to support prime contractors on DLA Troop Support Medical Supply Chain projects. The items must adhere to all technical specifications and be delivered FOB Destination to military installations located at Fort Bragg, North Carolina, and Rapid City, South Dakota. The contract is managed under the Department of Defense Medical Supply Chain and falls under NAICS code 339113. A strict delivery timeline of 20 days is required for the packaging and shipment of all units to the designated locations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Nonpneumatic TourniquetsThis subcontract involves the supply of nonpneumatic tourniquets to prime contractors supporting DLA Troop Support Medical Supply Chain projects for the Department of Defense. The required equipment must feature one-handed single routing buckles, reinforced windless clip systems, and beveled contact bars. The specific order consists of five units of NSN 6515015217976, which must be delivered in sealed unit containers. All items must be packed and marked in strict accordance with MIL-STD-2073-1E, Special Packaging Instructions MPPWN00001, and Medical Marking Standard No. 1. The place of performance for this contract is located at Fort Polk, Louisiana. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026, under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supplier of Disposable Heating Blankets (NSN 6532015254062)This subcontract involves the supply of disposable heating blankets for prime contractors under DLA Troop Support supply contracts for the Department of Defense Medical Supply Chain. The blankets must adhere to NSN 6532015254062 specifications, measuring 34 by 48 inches and utilizing water-repellent, UV-protective materials. Each unit must provide 40 degrees Celsius of heat for a duration of 6 to 8 hours through either chemical or autonomous activation. The supplier is required to maintain FDA regulation compliance and a valid CAGE code. Deliveries consist of 2,000 units per MMS NO. 1 packaging standards, with the place of performance located in Rapid City. The response deadline for this opportunity is November 5, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Same awarding agency

NAICS: 811310
New
Federal
On-Call Ad-Hoc Elevator InspectionsThis subcontract opportunity is for on-call ad-hoc elevator inspection services supporting prime contractors on Department of Veterans Affairs projects in Bonham, Texas. The selected provider will perform rapid response inspections following maintenance repairs and conduct spot-checks or safety inspections to return units to service after unsafe-condition shutdowns. All work requires the delivery of event-specific inspection reports to ensure compliance and safety. Eligible contractors must hold valid TDLR licensing and be able to pass a VA background investigation. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811310. Responses are due by November 9, 2026, for the Network Contract Office 17.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811310
New
Federal
Specialized Five-Year Elevator Full-Load TestingThis five-year subcontract involves performing high-intensity, full-load safety testing for prime contractors on Department of Veterans Affairs projects located at the Dallas, Garland, and Sam Rayburn facilities. The scope of work focuses on verifying the structural and mechanical integrity of elevators using certified test weights and equipment in strict accordance with ASME A17.1/CSA B4 standards. The final deliverable for these services is a Certified Full-Load Test Report. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811310. Qualified contractors must possess specialized load testing certification and be able to pass a VA background investigation. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, for work performed in the Bonham area.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811310
New
Federal
Semi-Annual and Annual Elevator Inspection ServicesThis subcontract opportunity is for semi-annual and annual elevator and dumbwaiter inspection services at Department of Veterans Affairs facilities located in Dallas, Garland, and Bonham, Texas. The selected provider will perform routine safety inspections of machine rooms, hoistways, and pits to identify deficiencies, ensuring all equipment meets safety standards. Key deliverables include the submission of detailed inspection reports and necessary regulatory filings to the Texas Department of Licensing and Regulation. To be eligible, contractors must hold valid Texas state licensing and TDLR certification. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811310. Interested parties must submit their responses by November 9, 2026, to support prime contractors managing these federal facility projects.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541350
New
Federal
NTX Elevator Inspection
Solicitation # 36C25727Q0031-0001
The Department of Veterans Affairs Network Contracting Office 17 is soliciting elevator and dumbwaiter inspection and testing services for three facilities located in Dallas, Garland, and Bonham, Texas. This requirement is 100% set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 541350. The scope of work includes annual Category 1 inspections for all conveyances and five-year Category 5 full-load testing for 23 conveyances in Garland and Sam Rayburn, and 47 conveyances in Dallas, including three dumbwaiters. All services must be performed in accordance with A17.1 and A17.2 elevator codes by TDLR-registered and QEI-certified inspectors. The contract will be awarded based on technical capabilities, past performance, and price. Deliverables include inspection reports and regulatory filings submitted to the Texas Department of Licensing and Regulation and the Contracting Officer's Representative. Invoices are to be submitted in arrears upon the completion and acceptance of services. Proposals must be submitted as a single combined PDF by November 9, 2026, at 3:00pm CST, with a 25-page limit for the technical proposal, excluding technical exhibits such as licenses and certifications. Key administrative requirements include compliance with FAR 52.222-42 and 52.222-43 regarding labor standards and the VAAR 852.219-75 certification.
Building Inspection Services

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 238220
New
Federal
CANCELLATION - NTX Steam Trap Monitoring - CANCELLATION
Solicitation # 36C25727Q0033
Solicitation 36C25727Q0033 was issued by the Department of Veterans Affairs, Central Texas Veterans HCS, for wireless monitoring and steam system maintenance at the Dallas VA Medical Center Campus. The scope of work required a contractor to survey, baseline, and standardize approximately 673 steam traps by replacing them with quick-change trap-station assemblies and implementing a continuous wireless failure monitoring system. The project excluded the central boiler plant and required strict adherence to NFPA 70, DOE guidance, and Joint Commission safety standards. The contract was structured as a total set-aside for VIP-listed Service-Disabled Veteran-Owned Small Businesses (SDVOSB) with a base year and four one-year option periods. The solicitation has been canceled in its entirety via amendment 0001. This cancellation was prompted by the need for necessary revisions to the Performance Work Statement following feedback received from the industry. The government intends to reassess the requirements and resolicit the project at a later date.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 315210
New
Federal
CTX Employee Uniform Purchase
Solicitation # 36C25727Q0012
The Department of Veterans Affairs, Network Contracting Office 17, is soliciting quotes for a firm-fixed price contract to purchase bulk employee work uniforms for Environmental Management Services at the Doris Miller VA Medical Center in Waco, Texas. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The scope of work includes providing uniforms with custom embroidery and personalization, with the requirement that the vendor provide image mock-ups and potential samples. The contract structure consists of a base year and four option years, with an ordering period spanning from November 1, 2026, through October 31, 2031. Orders will be issued on an as-needed basis with a minimum order value of 500 dollars and a maximum order limit of 300,000 dollars. Award will be determined using the Lowest Priced Technically Acceptable (LPTA) evaluation method. Submissions will first undergo a completeness review, followed by price ranking, and finally a technical capability assessment on a pass/fail basis. To be considered, offerors must submit a signed SF 1449, a detailed Price/Cost Schedule, a Capability Statement, three past performance references, and a signed VAAR certificate of compliance regarding subcontracting limitations. All deliverables are FOB Destination to the Waco, Texas location and must be labeled with the awarded contract and purchase order numbers. The final deadline for proposal submission is November 13, 2026, at 13:00 CST.
Cut and Sew Apparel Contractors

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 562111
New
Federal
Construction Debris Hauling and DisposalThis subcontract opportunity, managed by the Department of Veterans Affairs Network Contract Office 17, requires a contractor to provide construction debris hauling and disposal services for prime contractors at VA healthcare facilities in Temple, Texas. The scope of work involves the collection of carpet, padding, and tack strips from designated work areas, ensuring all materials are transported in covered, sealed containers via approved routes and disposed of offsite in full compliance with federal, state, and local regulations. The final objective is to deliver a site completely cleared of all project-related demolition debris. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 562111. Interested parties must submit their responses by the deadline of November 25, 2026, at 3:00 PM.
Solid Waste Collection

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 325211
New
Federal
Government-Approved LVT and Trim SupplyThis subcontract, managed by the Department of Veterans Affairs Network Contract Office 17, requires the supply of luxury vinyl tile and trim for prime contractors working on VA healthcare facility projects. The scope of work includes providing LVT that matches existing flooring, matching cove base, contrasting transition strips, and manufacturer-approved low-VOC adhesives and underlayment. All materials must adhere to VA sustainability requirements and be delivered specifically to Building 147 in Temple, Texas. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 325211. Interested parties must submit their responses by November 25, 2026, at 3:00 PM.
Plastics Material and Resin Manufacturing

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 238340
New
Federal
Luxury Vinyl Tile (LVT) and Cove Base InstallationThis subcontract opportunity is for the installation of Luxury Vinyl Tile (LVT) and cove base at a Department of Veterans Affairs healthcare facility in Temple, Texas. The scope of work includes the removal of existing carpet, padding, and adhesives, followed by comprehensive subfloor preparation involving cleaning, leveling, and moisture mitigation. The contractor is responsible for installing government-approved LVT, cove base, and transition strips using low-VOC adhesives, while strictly adhering to dust and noise control protocols necessary for a healthcare environment. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238340. Managed by the Department of Veterans Affairs Network Contract Office 17, the solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026. The final deliverable is the complete installation of all specified flooring and trim.
Tile and Terrazzo Contractors

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 325413
New
Federal
Supply of ALBAcyte Blood Bank ReagentsThis subcontract involves the manufacture and supply of specialized ALBAcyte blood bank reagents for prime contractors supporting the Department of Veterans Affairs North Texas Health Care System. The scope of work includes the delivery of A1, A2, B, IgG Sensitized, Antibody ID Panels, and C3 Coated RBCs. To ensure product efficacy, the contractor must utilize shipping containers that maintain reagent integrity and adhere to a defined Quality Plan and FDA approval standards. Deliveries are to be made FOB Destination to the Transfusion Medicine Unit located in Dallas, Texas. The contract is categorized under NAICS code 325413 and is managed through the Department of Veterans Affairs Network Contract Office 17.
In-Vitro Diagnostic Substance Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 238220
New
Federal
Root-Cause Corrective Repair Services (Plumbing/HVAC/Roofing)This subcontract opportunity is for Root-Cause Corrective Repair Services focusing on plumbing, HVAC, and roofing for Department of Veterans Affairs facility projects in Dallas, Texas. The selected contractor will perform physical repairs to building systems, including fixing pipe leaks, addressing roof failures, and correcting HVAC condensation or leak issues to deliver sealed building envelopes and functional mechanical systems. The contract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 238220. Requirements for performance include holding valid local Texas trade licenses and maintaining strict ICRA and PCRA compliance when working within clinical areas. Responses are due by November 18, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 423830
New
Federal
Remediation Equipment and Consumables SupplierThis subcontract opportunity is for a Remediation Equipment and Consumables Supplier to support prime contractors on Department of Veterans Affairs facility projects in Dallas, Texas. The selected provider will supply and maintain specialized drying and filtration equipment, including HEPA air scrubbers, negative air machines, LGR/Desiccant dehumidifiers, air movers, moisture meters, and particle counters. Additionally, the contractor is responsible for providing containment materials and personal protective equipment that adhere to EPA and VHA M3P standards, along with equipment rentals and consumable materials. Managed by the Department of Veterans Affairs Network Contract Office 17, this opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 423830. The solicitation was posted on October 28, 2026, with a response deadline of November 18, 2026.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 19 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 339113
Federal
65--Ortho Moreland Cementless Instrument Set
Solicitation # VA26214Q1403

POSTED

about 12 years ago

DEADLINE

N/A
View Details
NAICS: 339113
Awarded
Federal
65--Olympus 3D Deflectable Video System
Solicitation # VA25714Q1537
257-NETWORK Contract Office 17 (36C257)

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Closed
Federal
Exactech Case Package
Solicitation # FA8601-14-T-0260
FA8601 Aflcmc Pzio

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Federal
70--Zeiss FORUM Software for the Columbus Ohio VA Ambulatory Care Center - Optometry Department
Solicitation # VA25014I0724
250-NETWORK Contract Office 10 (36C250)

POSTED

about 12 years ago

DEADLINE

N/A
View Details
NAICS: 339113
Awarded
Federal
10--Chemical Weapons and Equipment
Solicitation # W56HZV12R0038
W4GG Hq US Army Tacom

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Awarded
Federal
68--COMPRESSED AIR,BREA
Solicitation # SPE4A614THM44

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Federal
65--ZEISS VISUCAM PRO NM & EQUIPMENT FOR WHITE RIVER JUNCTION VAMC OPTOMETRY CLINIC.
Solicitation # VA24114Q0958

POSTED

about 12 years ago

DEADLINE

N/A
View Details
NAICS: 339113
Awarded
Federal
65--Zeiss Microscope for OR
Solicitation # VA25114Q0551
250-NETWORK Contract Office 10 (36C250)

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Awarded
Federal
Closure Fast Catheter
Solicitation # N0025914T0265
Naval Medical Center San Diego Ca

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Awarded
Federal
66--BEBIONIC-V3 HAND* MEDIUM, QUICK DISCONNECT WRIST, RIGHT
Solicitation # VA24014Q0075
Rpo East (36C24E)

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Awarded
Federal
65--Hemodialysis Units
Solicitation # VA52814Q0303
242-NETWORK Contract Office 02 (36C242)

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details
NAICS: 339113
Awarded
Federal
65--Lease, Purchase, and Service of Flexible Endoscopes FSS BPA
Solicitation # VA26114Q0174
261-NETWORK Contract Office 21 (36C261)

POSTED

about 12 years ago

CLOSED

about 12 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS