Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

65--WRAP AND LITTER,PAT

Active

SPE2DH26T5342Federal

Response Deadline07/28/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

331313 - Alumina Refining and Primary Aluminum ProductionView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 21

Combined Synopsis

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111, USA

Organization / Agency

Department Of Defense → DLA Troop Support

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 6530015771091 WRAP AND LITTER,PAT: Line 0001 Qty 29 UI EA Deliver To: DLA DISTRIBUTION DEPOT HILL By: 0172 DAYS ADO Approved source is 9R594 2016-179. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

WRAP AND LITTER, PAT

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

MASSAGER, MUSCLEThe contract is for a hand-held muscle massager featuring a foam-covered, ergonomically designed body with non-slip grips, suitable for targeted relief on the neck, arms, shoulders, upper and lower back, hips, glutes, quads, hamstrings, IT bands, calves, shins, and feet. The foam is closed-cell, non-porous, and free of rubber or latex, ensuring durability and ease of cleaning with antibacterial gel or spray. The unit measures 18 inches overall with a 10-inch roller length and is portable for convenient use. It is supplied as a single unit under the NSN 6530-01-600-2392, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with DLA standards. The government mandates removal of its identification from non-accepted supplies, and bidders must clearly state the source and part number being offered. The solicitation number is SPE2DH-26-T-5334, issued on July 20, 2026, with responses due by July 27, 2026, under a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located at Fort Bliss, Texas. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

FOAM ROLLER, PHYSICAL TThe contract is for the procurement of two foam rollers designed for physical therapy, specifically a firm blue round foam roller measuring 6 inches by 12 inches, identified by the NSN 6530-01-600-8194. Each unit must be individually packaged in a sealed commercial container that protects against damage or breakage and then packed in suitable commercial shipping containers to ensure safe and cost-effective delivery to Fort Bragg, North Carolina, with a delivery deadline of 20 days after award. All packaging and labeling must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and suppliers must reference this standard for proper identification and marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract also includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. Bidders are required to specify the manufacturer, part number, and source of the foam rollers being offered, and all submissions must be received by the response deadline of July 27, 2026. The procurement is managed by the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

FOAM ROLLER, PHYSICAL TThe contract is for the procurement of two foam rollers for physical therapy, identified by NSN 6530-01-600-8186, with specifications indicating a firm, round, blue foam roller measuring 6 inches by 36 inches, intended for therapeutic use. The solicitation number is SPE2DH-26-T-5339, issued on July 20, 2026, with a response deadline of July 27, 2026, and delivery must be completed within 20 days ADO to the designated location at Fort Bliss, TX, under FOB Destination terms. The contract includes comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with DLA Packaging Requirements RP001 and the Medical Marking Standard No. 1, superseding MIL-STD-129 for medical items. All units must be commercially packaged, palletized per RP001, and marked with required identifiers including Unit of Issue, Quantity per Unit Pack, Transportation Control Number, and Distribution Identification Code using bar-coded or machine-readable labels. The contract is governed by multiple Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering critical compliance areas including sustainable products, hazardous materials handling, trafficking in persons, employment eligibility, cybersecurity safeguarding, and prohibition of covered defense telecommunications equipment. Inspection and acceptance occur at the destination, with the government responsible for evaluation under FAR 52.246-2. Payment must be processed electronically through Wide Area WorkFlow, with invoice submission mandatory per DFARS clauses. The contract includes required representations regarding small business status, Unique Entity ID, CAGE code, and potential joint venture participation. Subcontracting restrictions apply, particularly mandating U.S.-flag vessels for sea transport and prohibiting procurement of telecommunications equipment from certain Chinese military companies. Technical and packaging specifications are enforced through cross-referenced standards such as ASTM D3951, with no options or modifications formally defined, and the estimated contract value is approximately $7,795 based on aggregated line items, though pricing for the requested two units is not explicitly listed. The contracting officer is Tina Vu at DLA, and all submissions must be submitted via the DIBBS portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Niobium Material SupplyFermilab, as a Department of Energy contractor, is soliciting a subcontract for the supply of high-purity niobium material specifically formatted for use in scientific applications. The material must adhere to strict technical specifications, ensuring exceptional purity and structural integrity, and must be completely free of defects that could compromise performance in sensitive experiments. Full traceability is mandatory, requiring detailed documentation of the material’s origin, processing history, and quality controls throughout the supply chain to meet the rigorous standards demanded by advanced physics research. The opportunity is open for responses until August 7, 2026, with the procurement classified under NAICS code 331313, indicating it pertains to primary smelting and refining of nonferrous metals. The contract is designated as a subcontract and does not involve any set-aside provisions. The place of performance and contact details are not specified in the posted data, but the material will be delivered to Fermilab’s facilities for integration into scientific instrumentation. All vendors must ensure compliance with the technical and documentation requirements to be considered for award.

Fermilab - DOE Contractor

POSTED

DEADLINE

Supply of Raw Aluminum Alloy MaterialThe contract calls for the supply of certified aluminum alloy raw material with full traceability from source to delivery, including comprehensive mill test reports to verify composition, mechanical properties, and processing history. All materials must meet stringent defense industry specifications and comply with applicable environmental regulations to ensure suitability for critical aerospace and defense applications. The material is destined for performance at Tinker Air Force Base, with delivery and compliance deadlines strictly enforced. Submission responses are due by July 27, 2026, and the contract is structured as a subcontract under the NAICS code 331313, indicating classification within the aluminum rolling, drawing, and extruding industry. The ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with no set-aside provisions applied. The procurement is managed through the DIBBS platform, and bidders must ensure adherence to all technical, documentation, and logistical requirements outlined in the solicitation to qualify for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

LAMP HOLDER ASSEMBLThe contract is for the procurement of a single lamp holder assembly identified by NSN 6530-01-566-6739, intended for use on Federal Medical surgical ceiling lights. The item must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 and MIL-STD-129. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier as per NAVSEA 5100-003D. Packaging must adhere to commercial standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with all units sealed in suitable containers to prevent damage and shipped in commercial exterior containers using the lowest-cost carrier to the specified delivery point. The item is not regulated by the FDA. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Shipping must avoid parcel post and use the fastest traceable means, with parcel post address and freight shipping details provided for USS ESSEX LHD 2. All packaging and labeling must conform to DLA Packaging Requirements and palletization standards. The solicitation number is SPE2DH-26-T-5292, with a response deadline of July 27, 2026, and an original required delivery date of July 21, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Raw Materials & Components SupplyThe contract involves the supply of aerospace-grade aluminum, advanced composites, and AI-enabled components specifically for the fabrication of structural panels, with all materials required to meet stringent defense standards. Full compliance with the Defense Federal Acquisition Regulation Supplement is mandatory, ensuring that sourcing, manufacturing, and delivery adhere to U.S. national security requirements. Comprehensive traceability systems must be implemented from raw material origin through final assembly to guarantee authenticity and prevent the introduction of counterfeit or non-compliant parts. The procurement is structured as a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 331313 for aluminum rolling, drawing, and extruding. Performance is expected to support critical defense applications, with no specific geographic restriction listed for place of performance. The contract was posted on July 17, 2026, and is accessible via the DIBBS portal under award number SPE4A726P3877. All supplied materials must align with the technical and regulatory rigor expected in defense aerospace systems, emphasizing quality assurance, supply chain integrity, and domestic sourcing where applicable.

Defense Logistics Agency

POSTED

DEADLINE

HYGIENE KIT, HOSPITAL PThe contract is for a hospital patient hygiene kit containing thirty units, each comprising a hair brush, comb, soap, a 6x10 inch ziplock bag, a razor, a toothbrush, toothpaste, a clear vinyl pouch, a 4x4 inch box label, and five packets of 0.25 ounce shaving cream. The unit of issue is a package of thirty items, with one package ordered under NSN 6530-01-618-9373 and purchase request 7017513490. All items must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA specifications, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and bidders must provide the source and part number for each item supplied. Delivery is required within five days of award, and the solicitation, issued under SPE2DH-26-T-5258, closes on July 23, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Bronze Strainer Manufacturing and SupplyThe contract calls for the manufacture and supply of precision bronze strainers specifically designed for use in medical sterilization equipment, requiring strict adherence to technical specifications that ensure performance under rigorous clinical conditions. All products must be produced using domestically sourced materials and components to meet federal sourcing requirements, and must be packaged according to military packaging standards to guarantee integrity during transport and storage in austere environments. The work is classified as a subcontract under NAICS code 331313, indicating it falls within the copper foundry industry, and performance is expected to occur at a military postal address designated as FPO with zip code 96678. The solicitation was posted on July 15, 2026, with a response deadline of July 22, 2026, and is being managed by the Department of Defense’s Medical Supply Chain FSH office, reflecting its critical role in supporting military medical operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

VALVE, BALL ANLRThe contract specifies the procurement of a ball valve designated as VALVE, BALL ANLR with NSN 6530-01-546-3565 and part number 700321 REV J, requiring one unit for delivery within 20 days to a FPO military address. The item is classified as a medical device regulated by the FDA under Regulation 880.6880, Class II, requiring compliance with 510(k) premarket notification, registration, labeling, and good manufacturing practices. All packaging and marking must adhere to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging guidelines require each unit to be sealed in a protective container and shipped in commercial exterior containers suitable for safe transport at the lowest freight rate. The valve is subject to strict prohibitions against intentional use of mercury or mercury compounds except in approved applications like batteries or sensors, with additional containment requirements for portable devices. The vendor must ensure compliance with DLA packaging and labeling standards and use only authorized unit of issue codes. The delivery is FOB destination with zero variance allowed, inspection and acceptance occur upon arrival, and shipping must bypass parcel post in favor of traceable methods. The contract references technical and quality requirements from the DLA Master List, and the supplier must comply with all applicable defense logistics regulations including radiation-controlled environments and defense information handling. The point of contact for inquiries is Tina Vu of the Department of Defense, and the solicitation response deadline is July 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

STRAINER, BRONZThe contract is for the procurement of one unit of a brass strainer, NSN 6530-01-546-3556, intended for use with a general purpose sterilizer within the U.S. Department of Defense’s Medical Supply Chain FSH. The solicitation, identified as SPE2DH-26-T-5209, was issued on July 15, 2026, with responses due by July 22, 2026, and requires delivery by July 17, 2026, within a 20-day ADO window. The item must be shipped FOB destination to USS ARLINGTON LPD 24, FPO, ZIP 96678, using the fastest traceable means without parcel post. Packaging must comply with commercial standards and be secure in a sealed unit container to prevent damage, with exterior shipping containers suitable for safe, low-cost carriage to the delivery point. All labeling and marking must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and supersede ASTM D3951 where applicable. The item is subject to the Buy American Act and Berry Amendment, with a reduced threshold of $150,000, requiring full disclosure of non-domestic materials. The contractor must comply with cybersecurity mandates including NIST SP 800-171 DoD Assessment Requirements and safeguarding of covered defense information, in addition to FAR and DFARS clauses covering trafficking in persons, equal opportunity, electronic submission of payments via WAWF, and prohibited materials such as hexavalent chromium. Payment and receiving reports must be submitted electronically through WAWF under DFARS Appendix F requirements, and the contractor must maintain active SAM registration with updated socioeconomic and small business status representations. This solicitation is not a small business set-aside, and award will be based on compliance with all technical, packaging, regulatory, and cybersecurity conditions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

41--TANK,OIL DRAIN,COMP

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

BICON - SHIPPING CONTAINER

Other Metal Container Manufacturing

POSTED

about 18 hours ago

DEADLINE

Strategic Commercial Clothing

POSTED

about 18 hours ago

DEADLINE

65--BLANKET,BURN

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

56--FENCING,WIRE

Other Fabricated Wire Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

41--CONDENSER COIL,REFRIGE

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

All Other Industrial Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

54--TANK,LIQUID STORAGE

All Other Rubber Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

42--INSTALLATION KIT,CB

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

58--INTERCOMMUNICATION

Audio and Video Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

69--TRAINING AID,SMALL ARM

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

44--HEATER,FLUID,INDUST

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 18 hours ago

DEADLINE