Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on March 8, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

69 -- H-60/S-3B In-Service Engineering Office (ISEO) Engineering and Technical Product Support, Training System Modification, and Technical Data Verification

Closed
Reference-Number-N61339-06-R-0041Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 AC Water Main Replacement
Solicitation # 2026-RFQ-042
Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.
Public Works

POSTED

about 9 hours ago

DEADLINE

in 14 days

General Info

NAICS

541330 - Engineering Services

Place of Performance

NAVAIR/Naval Air Warfare CenterTraining Systems Division 12350 Research Parkway Orlando, FL 32826-3275 25324, FL

Set-Aside

8A

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nawc Training Systems Division
Contacts1 person available
OfficeORLANDO, FL, 32826-3224, USA
Office AddressORLANDO, FL, 32826-3224, USA
Contacts
Jane E WallerContract Specialist

Full Description

Show more
The Naval Air Warfare Center Training Systems Division, H-60/S-3B In-Service Engineering Office (ISEO), Engineering and Technical Product Support, Training System Modification, and Technical Data Verification, located at the Naval Air Station North Island, San Diego, CA. This requirement is being solicited as a competitive procurement action pursuant to Section 8(a), of the Small Business Act [15 USC 637(a)] and FAR 19.805. This synopsis is for information and planning purposes and is not to be construed as a commitment by the government. This is not a solicitation announcement for proposals. No contract will be awarded from this announcement. The engineering, technical and life cycle support services will encompass program management, engineering support consisting of trainer engineering and impact analyses, software and hardware design and development, software and hardware documentation maintenance and development, verification and validation, modification and Engineering Change Proposal (ECP) integration, configuraton management (CM), and quality assurance (QA), technical library maintenance and development, and logistic support for the below training systems. The contractor will design, develop, fabricate, update, modify, acquire, install, integrate and test hardware and software modifications to S-3B Training systems (Devices 2F92B, 2F92BF) and H-60 Training Systems (Devices 2F135 (Series), 14B51 (Series), 2F189 (Series), 2F195 (Series), 2F146, 14D3, 14H9). Successful performance of this support will require knowledge, understanding and experience with the following avionics systems and subsystems: AN/ASA-82 Display System, AN/ASA-84 Navigation Control System, AN/AWG-19 Weapons Control System, AN/APS-124 & AN/APS-137 Radar Systems, AN/ALR-76 & AN/ALQ-142 Electronics Support Measures Systems, AN/ALE-39 Electronic Countermeasures System, AN/APX-76A & AN/APX100 Identification Friend or Foe Systems, AN/ASQQ-81B (V2) Magnetic Anomaly Detection System, AN/ASQ-147 & AN/ASQ-198 Armament Control Systems, OR-89/AA & AN/AQQ-16 Forward Looking Infrared Systems, AN/UYS-1 Acoustic Processor, AN/ARR-72 & AN/ARR-84 Sonobuoy Receiver Systems, AN/AQS-13F Sonar Detection System and AN/AYK-10 & AN/AYK-14 General Purpose Digital Data Computers and avionics data-buses which use interface protocols such as MIL-STD-1553 and ARINC 429. Experience with INS, Radar, IFF, Acoustics, Data Link and GPS related systems are essential. Respondents should have in-depth knowledge of the Harris, SGI, and Encore computer systems, computer interface hardware/software, network interfaces (IEEE 802.3 format), Source coding, compilers, and assembly languages, e.g., Encore 32/9780 MPX-32 version 3.3 U03 with RSX, Encore 32/6780 MPX-32 version 3.3 U03 with RSX, and Encore 32/9750 MX-32 version 3.3 U03 with RSX, VMS Operating Systems and VME based equipment, McDonnell Douglas Vital IV and V, Evans and Sutherland and Aechelon visual systems. Additionally, programming experience in C, C++, UNIX, Assembly, Linux, and Fortran is required. Configuration management program experience with Softool, S-3B Configuration Tool Set and Concurrent Versions System (CVS) is essential. Knowledge and skills identified above are required to perform on-site engineering and technical tasks such as Quick Response Modifications (QRM), Systems Engineering, Configuration Management, Quality Assurance, and associated technical support for the training systems which are located at Naval Air Stations North Island, CA, Mayport, FL, Jacksonville, FL and Norfolk, VA. Engineering support demands in-depth expertise with the engineering process for training systems modifications and life cycle support including definition, design, installation, integration, test and production. A secret clearance is required to work on this project. Personnel qualifications - the government requires the contractor to provide highly skilled and experienced personnel in several specific disciplines for engineering and technical roles. The contractor must be familiar with Aviation Training Simulators systems and subsystems similar to those identified above and have the necessary experience and qualifications to perform under individual delivery orders. NAWCTSD anticipates awarding a Firm Fixed Priced (FFP) type contract with a base year and four one-year option periods to extend the term of the contract. The government anticipates a $15M contract over a 60-month period. Detailed requirements for specific tasks will be issued as delivery orders for a task or combination of tasks under the contract. The H-60/S-3B Trainers ISEO Technical Documentation Library will be made available between the hours of 0900-1500, [date to be determined], by appointment. Email requests for library access to barney.hunold@navy.mil or call (619) 545-9068. Documentation or data shall not be removed from the library. Secret security clearances are required to visit the site. The offeror shall submit a faxed visit request for those company officials who will visit the site. Mail visit requests, on company letterhead stationary, to the addresses stated in the draft Section L (see below). A - DRAFT copy of the SOW and RFP Sections B, L, and M will be posted on or about 15 Mar 2006, to the NAWCTSD World Wide Web site at http://www.ntsc.navy.mil/contract/procure.htm. NAWCTSD will utilize its World Wide Web Site for distribution of additional draft documents, as well as, the Final Request for Proposal, which is anticipated to be posted on or about 20 Mar 2006. Contractors proposals will be due on or about 28 Apr 2006. Contract award is scheduled on or about 31 May 2006. Please periodically review the NAWCTSD Web Site for the latest updates to the - DRAFT documentation. All comments or questions should be submitted or mailed to Naval Air Warfare Center Training Systems Division, 12350 Research Parkway, Orlando, FL 32826-3275, Attn: Sandra Davey, Code 25324, to arrive no later than 31 Mar 2006.

More opportunities from Department Of Defense → Nawc Training Systems Division

Same awarding agency

NAICS: 334111
New
Federal
Varjo XR-4 Secure Focal Edition Headset and a Varjo Base Pro perpetual license
Solicitation # N6134027Q1003
The Naval Air Warfare Center Training Systems Division (NAWCTSD) is seeking a brand-name specific procurement for one Varjo XR-4 Secure Focal Edition head-mounted display and one Varjo Base Pro perpetual offline software license. This equipment will support the Naval Innovative Science and Engineering (NISE) Cross-Cockpit Viewing Solutions for XR Trainers research and development effort, specifically focusing on evaluating chroma-key and rotoscoping techniques to reduce visual anomalies in flight trainers within the GT525 visual lab. The headset must be TAA-compliant, assembled in Finland, and feature 4K per eye mini-LED displays with 51 PPD aspheric lenses and a 120 by 105 degree field of view. This is a Firm Fixed Price purchase order set aside for SBA Certified Women-Owned Small Businesses (WOSB) under NAICS code 334111. The contract will be awarded on a lowest price basis to a responsible offeror who can guarantee delivery and invoicing by December 18, 2026. Delivery is F.O.B. Destination to Orlando, Florida, and must comply with MIL-STD-130 and MIL-STD-129 for item identification and shipment marking. All items must be new, as refurbished components are not acceptable. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
Electronic Computer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
THIS IS A NOTICE OF INTENT TO AWARD USMC TASK ORDER UNDER PACRM MAC AND IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.
Solicitation # N6134027R1008
This Small Business Set-aside effort is a Firm Fixed Price Task Order under the Pilot and Aircrew Curriculum Revision and Maintenance (PACRM) Multiple Award Contract (MAC). The objective is to provide the US Marine Corps with Program Manager support and specialized Readiness and Maintenance (R&M) services to ensure the currency and accuracy of training programs and electronic classroom systems. Performance is distributed across multiple sites, including MCAS Cherry Point, MCAS New River, MCAS Pendleton, and MCAS Miramar, with technical support focusing on aircraft such as the KC-130, CH-53, UH-1, and F-A-18, as well as cybersecurity support. The total period of performance is 55 months, consisting of a two-month mobilization phase, a five-month base period, and four twelve-month option periods. The government will award the contract based on a tradeoff evaluation of Past Performance, Technical attributes, and Price, with Past Performance and Technical factors combined being significantly more important than Price. Key requirements for offerors include a CMMC Level 2 Self-Certification and the ability to meet Secret facility clearance requirements. Deliverables include an Operations Security (OPSEC) Plan, Contractor Progress and Status Reports, and various instructional media and technical reports. Invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system, and the contractor must adhere to specific Department of Labor Wage Determinations and Collective Bargaining Agreements for personnel stationed in California, Virginia, and North Carolina.
Engineering Services

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 334111
New
Federal
P-8 ARMS and NGTSSC COTS Spares - RAAF
Solicitation # N6134026Q1027
Solicitation N61340-26-Q-1027 is a combined synopsis and request for quotation issued by the Naval Air Warfare Center Training Systems Division Orlando to procure commercial off-the-shelf spares for the P-8 training system's Automated Readiness Measurement System and Next Generation Training System Support Center. These spares, which include networking gear, computing and storage components, and peripherals, are intended to support the Royal Australian Air Force at RAAF Base Edinburgh. This procurement is a small business set-aside under NAICS code 334111 with a size standard of 1,250 employees. The requirement is partially brand-name restrictive, requiring exact matches for 93 line items, with substitutions only permitted if they are OEM designated successor part numbers. The contract will be awarded as a firm-fixed-price order using the lowest price technically acceptable basis. Evaluation factors include the aggregate total evaluated price, technical acceptability based on part number and quantity matches, and past performance. Award will be made to the responsible quoter with the lowest total price who receives an acceptable rating for both technical capability and past performance. All items must be new equipment from authorized sources and delivered FOB Destination to RAAF Base Edinburgh by May 21, 2027. The deadline for the submission of quotations is 14:00 US Eastern Standard Time on October 30, 2026.
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS