Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

72--Intent to Procure Sole Source Gates Breakdown Table

Active
VA-SNOTE-050708-001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Veterans Affairs Network 22 Logistics' Office plans to procure a custom-made breakdown table from IFE Marketing, located in Encinitas, California, on a sole-source basis. This table, manufactured by Gates Manufacturing Company, is designed for integration into the discharge section of a Stero dishwashing machine at the Veterans Affairs San Diego Healthcare System. The breakdown table features a 10-inch wide slat belt conveyor, a photo eye sensor, slanted shelf, trough, sink equipped with a salvajor disposer, and two pre-rinse hose assemblies. The procurement will be carried out using commercial item procedures under the Federal Acquisition Regulation (FAR) Part 12 and justification for other than full and open competition under FAR 6.302-1. This announcement is not a solicitation for offers but a notice that proposals submitted by 4:00 PM PDT on July 14, 2005, will be reviewed to determine if a competitive procurement is warranted, with the final decision resting solely with the Government. The anticipated award date for the contract is July 15, 2005. Interested parties may submit written inquiries or comments via fax directed to Jim Lent at the provided number. This acquisition specifically supports the operational needs of the Veterans Affairs facility in San Diego, CA.

General Info

Veterans Affairs seeks sole-source custom breakdown table from IFE Marketing for San Diego facility.

Agency

N/A

NAICS

333922 - Conveyor and Conveying Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
The Department of Veterans Affairs Network 22 Logistics' Office intends to procure sole source from IFE Marketing, 171 Saxony Road, Suite 211, Encinitas, CA 92024 the following items/services: the purchase and installation of a Gates Manufacturing Company custom made breakdown table, to be used as part of the discharge section, in the overall installation of a Stero dishwashing machine. The breakdown table includes a 10" wide slat belt conveyor, photo eye sensor, slanted shelf, trough, sink with salvajor disposer, and (2) Pre-rinse hose assembles. These items/services are for the Veterans Affairs San Diego Healthcare System, 3350 La Jolla Village Drive, San Diego, CA 92161. This acquisition will be accomplished using commercial items procedures in accordance with the Federal Acquisition Regulation Part 12 and in Accordance with FAR 6.302-1, for Other than Full & Open Competition. This notice is not a request for offers. All proposals received by 4:00 P.M. Pacific Daylight Time, July 14, 2005 will be considered by the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination not to compete this proposed procurement based on response to this notice is solely within the discretion of the Government. The anticipated date of award is July 15, 2005. Written inquiries or comments regarding this announcement may be faxed to +1 (555) 000-0000, Attention: Jim Lent.

Similar Contracts

Same NAICS industry code

NAICS: 333922
New
DIBBS
PALLET, MATERIAL HANDLI
Solicitation # SPE8EF-27-T-0129
Solicitation SPE8EF-27-T-0129 is a total small business set-aside procurement issued by DLA Troop Support for the supply of material handling pallets under NSN 3990002236529. The requirement consists of two line items totaling 63 bundles, with 13 bundles destined for DLA Distribution Warner Robins in Georgia and 50 bundles for DLA Distribution San Joaquin in California. The original required delivery date is March 6, 2027, with a need ship date of March 28, 2027, and a delivery lead time of 141 days after receipt of order. Technical specifications require pallets to be manufactured according to MIL-DTL-15011K(2) and specific reference drawings. Material requirements stipulate that oak or chestnut wood must be bark-free, square-edged, and maintain a moisture content not exceeding 19 percent. Packaging must comply with ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract incorporates several critical regulatory clauses, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment processing is mandated through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and submit quotes via the DIBBS portal.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333922
New
Federal
Kardex Megamat and Onsite Installation
Solicitation # 511976
UT-Battelle, LLC, the management and operating contractor for Oak Ridge National Laboratory (ORNL), is soliciting firm fixed price quotes for the procurement and onsite installation of three Kardex Megamat units. The specific equipment required consists of 480V 3Phase units with 12 shelves measuring 96.5x16.9x12.3 inches. This procurement is governed by FAR 52.211-6, allowing for brand name or equal products, provided the seller is an authorized reseller and the items are authorized for use in the United States. The award will be granted to the lowest priced, technically acceptable proposal. Proposals must be submitted via email by October 30, 2026, at 5:00 PM EST. Offerors are required to provide a firm fixed price quote, a proposed delivery schedule, and a specific section addressing any exceptions or non-compliance to avoid being deemed non-responsive. Delivery is FOB Destination for domestic shipments, and all onsite personnel must be U.S. citizens or registered foreign nationals via the Foreign Access Central Tracking System. Additionally, the successful contractor must maintain general, professional, and cyber liability insurance of at least 2 million dollars each, with carriers rated A-/VIII or better by A.M. Best. Compliance with SAM registration and various FAR flowdown clauses regarding anti-kickback procedures and subcontractor sales is mandatory.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 333922
SLED
CP25013
Solicitation # CP25013
The Port of Lake Charles is soliciting proposals for the procurement of one new portal mounted traveling import hopper and related parts for its Bulk Terminal in Sulphur, Louisiana. The project is classified under heavy construction for wharves, docks, and harbor improvements, with specific requirements for pneumatic tubes and conveyors. The solicitation includes an option for the owner to purchase one additional identical unit within twelve months of the initial handover. Proposals must be submitted by November 20, 2026, and must include a base proposal, an option proposal for the second unit, and any alternate proposals. Required documentation includes a commercial summary, technical data summary, and a technical deviation form, all submitted in Excel format alongside a PDF and hard copy of the full proposal. The selected contractor must maintain local sales support in the Southeast United States and provide a five-year reference list of similar installations. Technical requirements emphasize strict adherence to UL standards and NFPA 70E for electrical safety, with specific mandates for stainless steel or brass nameplates and English labeling. The contract utilizes a milestone-based invoicing system with payments made via wire transfer within 45 days of approval. Quality assurance is rigorous, requiring inspections at both fabrication and delivery sites, the provision of a mobile office trailer on-site, and the issuance of formal certificates for pre-shipment, substantial completion, and final acceptance. Award evaluation is based on a 125-point scale to determine the order of contract negotiations.
Port of Lake Charles

POSTED

9 days ago

DEADLINE

in 22 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS