Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

95--SHEET,METAL

Active
SPE8E926Q0600Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation seeks 600 units of sheet metal identified by NSN 9535002320565, with 300 units allocated to each of two line items, both requiring delivery to the DLA Distribution Depot in Oklahoma within 60 days of award. The procurement is conducted under a combined solicitation issued as a Small Business Set-Aside, exclusively open to small businesses as defined by the SBA, with the NAICS code 331491 indicating the relevant industry classification. The solicitation, numbered SPE8E926Q0600, was posted on July 20, 2026, and responses must be submitted electronically by July 27, 2026, with no hard copies available. All responsible sources may submit quotes if received on time, and digitized drawings, military specifications, and standards can be accessed or ordered online. The contracting office is under the Department of Defense's DLA Troop Support, based in Philadelphia, Pennsylvania, and inquiries must be directed via email to the designated point of contact, with additional information accessible through the provided SAM.gov link or DIBBS website using the solicitation number.

General Info

600 sheet metal units solicited under Small Business Set-Aside, due in 60 days to Oklahoma depot.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Troop Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5096, USA
Organization / Agency
Department Of Defense → DLA Troop Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5096, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 9535002320565 SHEET,METAL: Line 0001 Qty 300 UI SH Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0060 DAYS ADO Line 0002 Qty 300 UI SH Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0060 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
SHEET, METALAluminum alloy metal sheet measuring 0.063 inches thick, 48 inches wide, and 144 inches long, weighing approximately 42.24 pounds per sheet, is being procured under contract SPE8E9-26-T-3162 for a total of 140 sheets across two delivery lines, with each sheet priced at $70.00. The material must conform to ASTM B666/B666M-20 and SAE AMS-QQ-A-250/8C for Alloy 5052 in H24 or H34 temper, and comply with ASTM B660-23 for packaging. All sheets must be supplied in whole-foot lengths with no test coupons permitted and must meet exact dimensional tolerances. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling that is legible, waterproof, and non-contaminating; adhesive labels are required in lieu of line markings. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must follow MIL-STD-2073-1E and RP001 DLA requirements with Level A preservation per ASTM B660 and marking per ASTM B666, and all shipments must adhere to MIL-STD-129. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as per DLA Troop Support requirements; failure to comply may result in rejection or criminal penalties. Delivery is due within 50 days FOB origin to two DLA distribution depots in Cherry Point, NC and Hill AFB, UT with zero quantity variance, inspection and acceptance occurring at destination, and no source inspection required due to QSLD qualification.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCYThe contract encompasses the procurement of radio frequency cable under NSN 6145012327484 as part of a unilateral Indefinite Delivery Contract (IDC) issued by the Department of Defense’s Maritime Supply Chain. The estimated quantity is 155,500 feet with a guaranteed minimum of 23,325 feet post-order acceptance, and the maximum contract value is capped at $350,000. Deliveries are to be made FOB origin within 63 days of order placement, with inspection and acceptance occurring at the destination. The cable must conform to technical specifications MIL-DTL-17J(5) and MIL-DTL-17/176E(1), and its packaging, preservation, and labeling must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Palletization adheres to DLA’s RP001 requirements, and all marking must follow standardized DoD bar-coding practices. The item is designated as a commercial item and is listed on a Qualified Products List, requiring compliance with applicable quality standards. Mercury and mercury-containing compounds are prohibited unless used in approved functional applications such as batteries, fluorescent lamps, or instrument controls, with portable mercury-containing devices needing shockproof construction and secondary containment per NAVSEA 5100-003D. The contract mandates strict adherence to cybersecurity requirements including safeguarding covered defense information and reporting cyber incidents under DFARS 252.204-7012, and prohibits the use of hexavalent chromium and covered defense telecommunications equipment from Communist Chinese military companies. Contractors must provide representations regarding their small business status, Unique Entity ID, and CAGE code, and are subject to clauses addressing trafficking in persons, employment eligibility, whistleblower rights, and ethical conduct. Invoicing is required through WAWF using electronic submission formats compliant with DFARS 252.232-7006, and no payment or accounting details are specified until the award is finalized. All technical and quality requirements not explicitly stated are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METALAluminum alloy sheet metal measuring 0.125 inches thick, 48 inches wide, and 144 inches long, with a nominal weight of 83.810 pounds per sheet, is being procured under solicitation SPE8E9-26-T-3107 for a total quantity of 79 sheets at $79.00 per sheet. The material must conform strictly to SAE AMS4016N and ASTM B209 standards with alloy 5052 in H32 temper, and all sheets must be exact whole-foot lengths without test coupons. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance requires explicit declaration of deviation. Every shipment must include a Certificate of Quality Compliance and carry continuous identification markings on each unit including contract number, NSN, specification revision, alloy, grade, manufacturer details, heat and lot numbers, and dimensions. Markings must be stamped or stenciled in legible, waterproof, non-contaminating fluid and must withstand normal handling; adhesive labels are required for products under 0.250 inches in nominal OD. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation method ZZ and marking in compliance with MIL-STD-129R. The contract is a total small business set-aside under NAICS code 331491, with delivery to New Cumberland, PA, required within 87 days of award under FOB origin terms and zero tolerance for quantity variance. All materials are designated as critical application items, and failure to meet requirements may result in rejection, civil penalties, or criminal liability. Continuous identification, full QSLD compliance, and documentation submission are mandatory and non-negotiable.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METALThe solicitation seeks quotations for 210 sheets of metal designated by NSN 9535002320522, with quantities divided into three lines: 150 units, 30 units, and another 30 units, all to be delivered to the DLA Distribution Depot in Oklahoma within 167 days after award. The procurement is conducted under an RFQ with electronic submission only, and no hard copies of the solicitation are available; all documents including drawings and military specifications must be accessed electronically through the provided SAM.gov link. The contract falls under NAICS code 331491 and is managed by the Defense Logistics Agency Troop Support headquartered in Philadelphia, Pennsylvania. Responsible suppliers may submit quotes through the designated portal, and responses must be received by the deadline of July 24, 2026. All inquiries should be directed via email to the primary point of contact listed in the solicitation, with reference to the official document available on DIBBS.
DLA Troop Support

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METALThe contract seeks procurement of 330 units of metal sheeting with NSN 9535002320519, divided into three lines of 50, 175, and 100 units respectively, all to be delivered to DLA Distribution San Diego within 118 days of award. The solicitation is issued as a Request for Quote under solicitation number SPE8E926Q0603, with a response deadline of July 24, 2026, and was posted on July 20, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available; interested vendors must access the full documentation via the provided online link. The procurement is open to all responsible sources without set-aside restrictions, and digitized technical documents such as military specifications and drawings may be retrieved electronically. The contracting activity is managed by the Defense Logistics Agency Troop Support, with the office headquartered in Philadelphia, Pennsylvania, and primary inquiries must be directed via the designated email address provided in the solicitation. The North American Industry Classification System code applicable to this procurement is 331491, indicating it falls under other aluminum rolling, drawing, and extruding.
DLA Troop Support

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of electrical wire designated by NSN 6145011953394, with a total quantity of 72,500 feet divided into two line items: 3,644 feet and 68,856 feet, both to be delivered in continuous lengths as dictated by applicable advice codes, where multiple unit packs are permitted only under specific advice codes 2P or 39. The wire must comply with technical specifications referenced under SAE AS22759/43B Revision B and SAE AS22759E Revision E, both dated July 1, 2023 and 2024 respectively, and is classified as a critical application item requiring strict adherence to configuration management and engineering change procedures. All materials must be packaged and preserved per MIL-STD-2073-1E and MIL-DTL-12000, marked according to MIL-STD-129 with no special marking required, and palletized in accordance with DLA packaging requirements. Delivery is FOB origin with a 5% quantity variance allowed, inspection and acceptance occurring at the destination, and delivery timelines set at 194 days from contract award. Two separate delivery points are designated—New Cumberland, Pennsylvania and Tracy, California—with distinct shipping addresses and need-by dates of May 10, 2027 and February 10, 2027 respectively, the latter being earlier than the original required delivery date of May 3, 2027. The contract incorporates DLA’s master list of technical and quality requirements, requires compliance with government identification removal protocols for non-accepted items, and applies to a qualified products list item, ensuring only approved manufacturers may supply the material. The procurement is governed by the Department of Defense and managed under solicitation SPE7M1-26-T-218P, with primary point of contact Alisha Blanton at DLA.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331491
New
DIBBS
CABLE, RADIO FREQUENCYThis contract specifies the procurement of 6,000 linear feet of radio frequency cable under solicitation SPE7M1-26-T-218H, with a delivery requirement of 52 days from award and delivery point at FOB origin. The cable must conform to technical specifications MIL-DTL-17/127D and MIL-DTL-17J, with part number M17/127-RG393, and must be supplied in continuous length depending on the advice code, which overrides any conflicting schedule requirements. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129, including special marking and palletization per DLA requirements. Mercury and mercury-containing compounds are strictly prohibited in the cable, its preservation, packaging, packing, and marking, with limited exceptions for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, where such items must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract mandates CMMC Level 2 self-assessment for cybersecurity compliance and incorporates all applicable DLA technical and quality requirements referenced by R or I numbers from the DLA Master List. The item is subject to a 5% quantity variance and will be inspected and accepted at destination. The delivery address is DLA Distribution San Diego, with a required ship date of September 21, 2026, and an original delivery date of February 17, 2027. All unit of issue and purchase unit references must align with the official DLA ANSI X12 standards.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
Federal
61--CABLE,RADIO FREQUENCYThe solicitation seeks quotes for 6,000 feet of coaxial cable designated by NSN 6145001499176, a qualified products list item used for radio frequency applications. All responses must be submitted electronically through the designated online portal, with no hard copies available; bidders must ensure timely submission by the deadline of July 30, 2026, to be considered. The contract requires delivery of the full quantity to DLA Distribution San Diego within 52 calendar days after award, and all suppliers must comply with applicable military specifications, which can be accessed electronically. This is a full and open competition with no set-aside, allowing any responsible source to respond, and the solicitation number SPE7M126T218H can be searched via the DIBBS platform for full details. The contracting office is part of the Department of Defense under DLA Land and Maritime, located in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331491
New
DIBBS
DUCT ASSEMBLY, AIR CThe contract is for a single unit of DUCT ASSEMBLY, AIR C with NSN/Part Number 1660-01-114-7242, under solicitation SPE4A7-26-T-578M, with a response deadline of July 24, 2026, and a delivery requirement of 290 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RD005 for CMMC Level 2 C3PAO certification, RD002 for Covered Defense Information, RP001 for DLA packaging standards, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ032 for export control of technical data. The item contains technical data subject to ITAR or EAR regulations, meaning any export, including disclosure to foreign persons within the U.S., requires prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completed DOD export control training, and approved status via the DLA Export-Controlled Technical Data Questionnaire. The procurement is for a federal agency under the Department of Defense, with NAICS code 331491, and performance is expected within the United States.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 331491
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of 2,000 feet of electrical wire, identified by NSN 6145012019532, under solicitation SPE7M1-26-T-212L, with a required delivery within 140 days of award. The wire must conform to MIL-DTL-24643/3F Revision F dated 11/27/2023, and is classified as a critical application item requiring strict compliance with technical specifications. The product must be supplied in continuous length, as dictated by the advice code, with multiple unit packs prohibited if the code is 2N, 28, or 34, but permitted if the code is 2P or 39, with the advice code taking precedence over any conflicting schedule details. The wire is subject to qualification listing requirements since it is listed on a primary QPL or QML, and full and open competition applies. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the wire, except for specific functional components like batteries or instruments, which must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking compliant to MIL-STD-129 and palletization according to DLA packaging standards. Delivery is FOB origin to the designated receiving warehouse in Tracy, California, with a 5% quantity variance allowed. Inspection and acceptance occur at the destination, and the contract includes special preservation and packaging requirements. The required delivery date is January 6, 2027, with a need ship date of December 15, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and revisions are controlled based on solicitation or award dates depending on acquisition size.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331491
New
DIBBS
DUCT ASSEMBLY, AIR CThe contract solicitation SPE4A0-26-T-3881 calls for the procurement of one DUCT ASSEMBLY, AIR C, identified by NSN 1660-01-223-1222 and part number L5351727-001, to be delivered to Ellsworth AFB, South Dakota, within five days of award, with FOB Origin terms requiring the offeror to include all transportation costs to a contiguous U.S. location. The item is subject to strict technical and quality requirements, including adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Quality systems must comply with ISO 9001:2015 for both manufacturers and non-manufacturers, with additional tailored requirements applying, and the manufacturer’s inspection system must meet SAE AS9003 or ISO 9001 tailored to SAE AS9003. Cybersecurity compliance is mandatory at CMMC Level 2 through self-assessment, and the item is classified as Covered Defense Information requiring appropriate safeguards. All packaging must conform to ASTM D3951 and MIL-STD-129 labeling, with palletization per RP001 DLA Packaging Requirements and a unit pack quantity of one. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required if using MIL-STD-105/ASQ Z1.4, and attribute verification levels of VII, IV, and II assigned to critical, major, and minor characteristics respectively. Measuring and test equipment must meet RT001 standards. The government will inspect and accept the item at destination, and contractors must use WAWF for invoicing and receiving reports compliant with DFARS Appendix F. Government identification on non-accepted supplies must be removed per RQ011, and no quantity variance is permitted. The contract includes configuration change management requirements for engineering change proposals or deviation requests, and the supplier must submit a source approval request with full documentation as required by RC001. The delivery is to be shipped via traceable freight methods—parcel post is prohibited—and the point of contact for the solicitation is Thomas Anderson of DLA Aviation, with a response deadline of July 22, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 331491
New
Federal
BAR,METALThis contract, issued under solicitation number N0010426QFF04 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, requires the supply of metal bars meeting stringent specifications for use in critical shipboard systems designated as Special Emphasis Level I material. The material must conform to SAE-AMS-QQ-S-763 for corrosion-resistant steel, specifically 304 Condition B in 1.5-inch round form, with strict requirements on chemical composition, mechanical properties, and magnetic permeability not exceeding 2.0. All material must be traceable from raw stock through every manufacturing stage to final delivery, with unique heat-lot markings permanently applied per MIL-STD-792 and accompanied by certified test reports that include complete, unqualified documentation of chemical and mechanical analysis. Re-certification is mandatory if any fabrication process alters the material’s properties, and no transcription of certification data is permitted. Quality assurance is rigorously enforced, requiring suppliers to maintain an ISO-9001 compliant quality system, with calibration under ISO-10012 or ANSI-Z540.3, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662. All subcontractors must be vetted and their work supervised to ensure compliance, with Government inspection rights extending to source locations. Certification documentation for each shipment must be submitted via WAWF to Portsmouth Naval Shipyard for review and acceptance before any material can be shipped, with delivery scheduled to conclude within 365 days and early or incremental shipments permitted at no additional cost. The contract mandates zero-defect acceptance testing, 100% inspection of traceability marks and certification records, and compliance with Buy American and mercury-free stipulations. Waivers and deviations require formal approval through the ECDS system, and failure to meet any requirement results in rejection. The procurement is issued under emergency acquisition flexibilities, with prompt payment terms extended to 45 days, and is subject to strict configuration control, engineering change proposals, and documentation handling under Navy distribution directives.
Navsup Weapon Systems Support Mech

POSTED

7 days ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

NAICS: 333994
New
Federal
44--DEHUMIDIFIER,SPACE
Industrial Process Furnace and Oven Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
Federal
42--HARNESS,HEAD
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
New
Federal
Tactical Body Armor

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
Federal
Oxygen Mask Assembly Synopsis
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339113
New
Federal
65--SPONGE,SURGICAL
Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333923
New
Federal
Fiber Rope AssemblyDLA Troop Support in Philadelphia is seeking qualified suppliers for NSN 4020-00-881-8736, a Fiber Rope Assembly, to expand the pool of approved sources for this critical item. All potential vendors must complete and submit the required market research survey by August 15, 2026, at 9:30 PM Eastern Time to be considered. This solicitation is classified as a sources-sought action, intended to gather industry capabilities and validate potential contractors before any formal procurement is issued. Government First Article Testing is mandatory for any supplier wishing to qualify as a source, ensuring the product meets stringent military specifications. Responses and inquiries must be directed to Kyle Barner and Nicole Scott via email at Kyle.Barner@dla.mil and Nicole.Scott@dla.mil respectively. The North American Industry Classification System code for this requirement is 333923, and performance of any resulting contracts would be based in Philadelphia, Pennsylvania.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 25 days
View Details
NAICS: 333924
New
Federal
46--WATER PURIFICATION
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
Federal
42--NOZZLE,FIRE EQUIPME
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
Federal
39--BLOCK AND TACKLE
Other Fabricated Wire Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
Federal
45--TOILET,AIRCRAFT
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
Federal
41--COMPRESSOR,REFRIGERATI
Nonferrous Forging

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332216
New
Federal
39--BINDER,LOAD
Saw Blade and Handtool Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details