Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

A--PANEL COMPONENT KITS

Active
N6554009T5073Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center, Carderock Division, Philadelphia is seeking to procure four Panel Component Kits through a sole source acquisition from EMS Development. The contract, identified by solicitation number N6554009T5073, is posted as a total small business set-aside under NAICS code 334416. This acquisition is facilitated through the Department of Defense’s Navy organization based in Bethesda, Maryland. Interested parties are instructed to direct any questions exclusively via email to the designated contact, with phone inquiries not accepted. The solicitation information is available on both the Federal Business Opportunities (FBO) and Navy Electronic Commerce Online (NECO) websites to ensure accessibility, with NECO serving as an alternative if FBO is down. This presolicitation notice was posted on January 27, 2009, and emphasizes the importance of using the specified platforms for updates or additional details related to this procurement. The focus on a sole source procurement indicates EMS Development is the exclusive provider considered capable of fulfilling the Navy’s requirements for these specific panel component kits.

General Info

Naval Surface Warfare Center seeks sole source EMS Development for four Panel Component Kits.

Agency

Department Of Defense → Nswc Carderock

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

MD

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
ContactsNo contacts available
OfficeBETHESDA, MD, 20817-5700, USA
Organization / AgencyDepartment Of Defense → Nswc Carderock
Office AddressBETHESDA, MD, 20817-5700, USA
ContactsNo contact information available

Full Description

Show more
This synopsis is being posted to both the Federal Business Opportunities (FBO) page located at http://wps.eps.gov and the Navy Electronic Commerce Online (NECO) site located at http://www.neco.navy.mil. While it is understood that FBO is the simple point of entry for posting of synopsis and solicitation to the Internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the Naval Sea Systems Command. The Naval Sufrace Warfare Center, Carderock Division, Philadelphia intends to procure four (4) Panel Component Kits. The kits are being sought on a sole source basis from EMS Development. Any questions regarding this solicitation should be emailed to contact@example.gov. No phone calls will be accepted.See numbered notes 1 and 22.

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
Supplier of Non-Wire Wound Variable ResistorsThis subcontract through the Department of Defense Active Devices Division requires the supply of 23 non-wire wound, non-precision variable resistors meeting NSN 5905-01-367-8600. The selected supplier must ensure all components are packaged and marked in accordance with MIL-DTL-39032, MIL-STD-129, and IPC/JEDEC J-STD-609 standards. Delivery is set for DLA Distribution San Diego under FOB Origin terms. Compliance with the Buy American Act and DFARS cybersecurity reporting requirements is mandatory, while the use of additive manufacturing is strictly prohibited. Interested parties must respond by November 4, 2026, for this requirement categorized under NAICS code 334416.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-428Y
Solicitation SPE7M5-26-T-428Y is a small business set-aside request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division. The procurement is for 23 units of non-wire wound, non-precision variable resistors under NSN 5905-01-367-8600. Delivery is required within 168 days after order, with a need ship date of February 16, 2027, and a final required delivery date of April 4, 2027. The place of performance and delivery is DLA Distribution San Diego, and inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-DTL-39032, MIL-STD-129, and IPC/JEDEC J-STD-609. Invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity reporting requirements, and prohibitions on covered telecommunications equipment. Offers utilizing additive manufacturing are ineligible for award, and a price evaluation preference may be applied for HUBZone concerns.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER ASSEMBLY
Solicitation # SPE7M1-27-T-1119
Solicitation SPE7M1-27-T-1119, issued by the DLA Weapons Support Maritime Supply Chain, seeks quotes for 66 units of a Transformer Assembly, identified by NSN 5950-01-258-3089. The procurement falls under NAICS code 334416 and requires delivery to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a need ship date of June 19, 2027, and a final required delivery date of October 31, 2027. Terms are established as FOB Origin, and all quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically requiring Special Marking Code 06 for delicate instruments. Significant security and compliance obligations are in place, including CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and strict export controls under ITAR and EAR. Additionally, the contractor must comply with the Buy American and Balance of Payments Program and utilize Wide Area WorkFlow (WAWF) for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, GLASS
Solicitation # SPE7M5-27-Q-0125
Solicitation SPE7M5-27-Q-0125 is a small business set-aside request for the procurement of 100 units of fixed glass dielectric capacitors, identified as critical application items. The required hardware is specified as Kyocera AVX Components Corporation part number 100B200JP500X under NSN 5910-01-081-9481. This is a firm fixed price acquisition with a delivery requirement of 60 days after order receipt, with a material need ship date of June 8, 2026. The items are to be shipped FOB origin to DLA Distribution Warner Robins in Georgia, where both inspection and acceptance will take place. The contractor must adhere to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for palletization. Specific requirements include lead finish marking per IPC/JEDEC J-STD-609 and preservation according to MIL-DTL-28786. Additionally, the contract incorporates technical and quality requirements from the DLA Master List. Administrative compliance requires the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Quotations must be submitted to the DLA Weapons Support Active Devices Division by November 14, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-27-T-1160
Solicitation SPE7M5-27-T-1160, issued by the DLA Weapons Support Active Devices Division, seeks quotes for 43 electronic shielding gaskets (NSN 5999-01-167-4704). This is designated as a critical application item that must be manufactured in accordance with basic drawing 18876 13092455 Revision A and associated reference drawings. The required delivery date is March 31, 2027, with a delivery period of 151 days after order. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The contract includes stringent technical and security requirements, including CMMC Level 2 certification and strict export controls under ITAR and EAR regulations. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all shipments marked per MIL-STD-129 and palletized according to RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. A price evaluation preference is available for certified HUBZone Small Business Concerns.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-27-T-1161
Solicitation SPE7M5-27-T-1161 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for 43 electronic shielding gaskets, identified as NSN 5999-01-167-4704. This is designated as a critical application item that must be produced in accordance with Technical Data Package Rev A Gen 3, specifically Basic Drawing 18876 13092455 and Reference Drawing 18876 MIS-35351. The required delivery date is February 25, 2027, with the place of delivery being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement includes stringent quality and security requirements. Manufacturers must maintain an inspection system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and inspection and acceptance will occur at the origin. Due to the nature of the technical data, offerors must have an approved US/Canada Joint Certification Program certification and DLA approval to access export-controlled data subject to ITAR or EAR. Additionally, the contract mandates compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Packaging must adhere to MIL-STD-129 and RP001, with specific labeling required for hazardous materials per the Hazard Communication Standard. Notably, the government will not evaluate or award to offers utilizing additive manufacturing processes. Eligible HUBZone small businesses may receive a price evaluation preference. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
Solicitation # SPE7M5-27-Q-0124
Solicitation SPE7M5-27-Q-0124 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 407 units of non-precision wire wound variable resistors, identified by NSN 5905-01-633-1066. The contract is a firm fixed price requirement with a delivery timeline of 394 days after receipt of order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. This procurement is not a small business set-aside and is being issued under Special Emergency Procurement Authority, meaning it may be awarded prior to the solicitation return date. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and RP001 for palletization. Special marking requirements under code ZZ mandate compliance with IPC/JEDEC J-STD-609 for identifying lead finish attributes on individual unit packs. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The government reserves the right to make multiple awards, with the best value offer receiving at least 60 percent of the total requirement. All quotes must be submitted via DIBBS and remain valid for 90 days.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M1-27-U-0840
Solicitation SPE7M1-27-U-0840, issued by the DLA Weapons Support Maritime Supply Chain, seeks quotes for 180 fixed, wire wound, inductive resistors under NSN 5905-00-429-3003. This procurement is intended to result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars for a one year period. The items are identified as commercial products and must be manufactured by an approved source using approved materials. Delivery is required within 42 days after order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I ozone depleting chemicals. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129 and IPC/JEDEC J-STD-609 for component lead finish identification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Cybersecurity standards are enforced through DFARS 252.204-7012 and NIST SP 800-171 assessment requirements. All quotes must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
Supply of Pulse Transformers (NSN 5950-00-346-9362)This subcontract involves the manufacture or sourcing of three pulse transformers, specifically part number NSN 5950-00-346-9362, to support prime contractors delivering for the DLA Weapons Support Electrical Devices Division. The supplier must ensure all products comply with the DLA Master List of Technical and Quality Requirements and certify adherence to DFARS 252.204-7016 concerning covered defense telecommunications equipment. The contract requires delivery of the units FOB Origin within 90 days after the order is placed. Performance is associated with NAICS code 334416 and is linked to a place of performance in New Cumberland, Pennsylvania.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
Supplier of Quick Coupling Halves (NSN 4730-01-579-8245)This subcontract involves the manufacture or procurement of a Quick Coupling Half, identified by NSN 4730015798245, for the DLA Weapons Support Fluid Handling Division. The contractor is strictly prohibited from using additive manufacturing processes to produce the component. All deliverables must comply with the DLA Master List of Technical and Quality Requirements, as well as MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The selected supplier must provide one warranted unit accompanied by a Certificate of Conformance. To ensure security and regulatory compliance, the contractor is required to maintain NIST SP 800-171 standards and complete a CMMC Level 2 self-assessment. The opportunity is categorized under NAICS code 334416, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CERAMI
Solicitation # SPE7M0-27-Q-0167
Solicitation SPE7M0-27-Q-0167 is a small business set-aside request for quotation issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one fixed ceramic dielectric capacitor, identified by NSN 5910-01-356-7214. This firm-fixed-price contract requires delivery within 30 days after the delivery order, with a material need date of October 29, 2026. The item is to be shipped FOB Origin to Fort Stewart, Georgia, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-DTL-39028 for capacitor preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Specific requirements include the identification of component lead finish per IPC/JEDEC J-STD-609 and a prohibition on the intentional addition of mercury. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M5-27-T-1732
Solicitation SPE7M5-27-T-1732, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for 500 units of non-wire wound, non-precision variable resistors (NSN 5905013147221). The procurement is governed by NAICS code 334416 and requires delivery within 20 days of award, with an original required delivery date of October 27, 2026. The items are to be delivered FOB Origin to the NCARNG Element in Raleigh, North Carolina. As a Qualified Products List (QPL) item, offerors must provide the manufacturing CAGE, source CAGE, item name, service identification, and test number. Technical compliance requires adherence to MIL-PRF-94/3M(4) and MIL-PRF-94G(4) specifications. Packaging and preservation must follow MIL-DTL-39032 and MIL-STD-2073-1E, while marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for component lead finish. The contract prohibits the use of Class I ozone-depleting substances without written approval. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and strict adherence to DFARS cybersecurity and domestic sourcing regulations, including the Buy American Act. Quotations must be submitted via the DIBBS portal by November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 236220
New
Federal
Building 143 Concrete Scale Pad Expansion and Dock Leveler Replacement
Solicitation # N00167-27-SIMACQ-CD-102-0003
The Building 143 Concrete Scale Pad Expansion and Dock Leveler Replacement project, managed by the Department of Defense under Nswc Carderock, involves extending an existing concrete pad and replacing a dock leveler in kind. This presolicitation, identified by solicitation number N00167-27-SIMACQ-CD-102-0003, falls under NAICS code 236220 and will be performed in Bethesda, Maryland. The opportunity was posted on October 30, 2026, with a response deadline set for November 9, 2026, at 3:00 PM. Interested parties may coordinate with primary point of contact Pamela Ganster or secondary contact Marlanea Kirkbride for further details regarding the submission process.
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Federal
Non-Recurring Engineering (NRE) and Technical SupportThis subcontract for Non-Recurring Engineering (NRE) and Technical Support supports prime contractors on projects for the Naval Surface Warfare Center Carderock Division within the Department of Defense. The scope of work focuses on initial engineering and tooling design, where the contractor is responsible for translating technical drawings into actionable manufacturing processes and comprehensive plans. Key activities include utilizing CAD/CAM software for process design and conducting virtual kickoff meetings to ensure technical alignment prior to production. The opportunity is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must adhere to the response deadline of November 12, 2026. The primary objective of the engagement is the successful delivery of all NRE activities and the establishment of technical alignment to facilitate efficient production cycles.
Engineering Services

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
Federal
Precision Machining of Device Piece PartsThis small business set-aside subcontract involves the precision machining of device piece parts for prime contractors supporting the Naval Surface Warfare Center Carderock Division. The scope of work includes the manufacture of body tubes, center mass, shim rings, top caps, and bottom caps using Government Furnished Materials in strict accordance with provided technical drawings. To qualify, contractors must possess CNC machining equipment and maintain an ISO 9001:2015 quality management system. Additionally, the provider must ensure full compliance with DFARS 252.204-7012 regulations for the delivery of all finished machined components.
Machine Shops

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
Federal
NSWCCD York Chill Pump Replacement
Solicitation # N0016727Q1002
The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1) for York Chiller No. 1 in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project requires the removal of the damaged pump and the installation of a York Chill Pump, Model YLAA0080SJ46X, Serial SEMM-609950. Due to the proprietary nature of the equipment, the contractor must utilize certified Johnson Controls technicians or representatives. The installation must be completed on or before December 18, 2026, at the NSWCCD facility in Bethesda, Maryland. This is a brand-name restricted procurement under full and open competition and is not set aside for small businesses. The government intends to award a single firm-fixed-price purchase order based on the lowest price technically acceptable method, evaluating quotations on a pass/fail basis for technical requirements and considering past performance via the Supplier Performance Risk System. All quotes must be submitted on official company letterhead, including all-inclusive pricing and business size, and sent via email to the contract specialist and contracting officer by 09:00 AM EDT on November 06, 2026. The contract includes specific requirements for item unique identification per MIL-STD-130 and electronic invoicing through the Wide Area WorkFlow system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 15 days
View Details
NAICS: 339999
New
Federal
Propulsor Device Machining
Solicitation # N0016727Q1004
The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting a firm fixed price contract for propulsor device part machining under solicitation N0016727Q1004. This requirement is a total small business set-aside under NAICS code 339999, with a business size limit of 550 employees. The scope of work involves the production of various components, including SIL top, bottom caps, and body tubes in quantities of 675 each, as well as R4 top caps, body tubes, bottom caps, shim rings, and center masses in quantities of 160 each. The period of performance extends from the date of award through July 18, 2027, with deliveries split between NSWC Carderock in Bethesda, Maryland, and the Portsmouth Naval Shipyard in Kittery, Maine. Award will be granted to the responsible quoter providing the lowest evaluated price among technically acceptable submissions, with technical acceptability determined on a pass/fail basis and past performance considered via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and adhere to strict packaging, cleaning, and marking standards, including MIL-STD-130 for item unique identification and MIL-STD-129 for shipment marking. Quote packages must include a cover sheet with the company name, point of contact, and CAGE code. Inquiries and specification drawing requests should be directed to Michael Bonaiuto, with a final quote submission deadline of November 12, 2026, at 12:00 PM Noon.
All Other Miscellaneous Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
Federal
COLUMBIA Class Tailcone Manufacture
Solicitation # N0016726R1005
The Naval Surface Warfare Center Carderock Division is soliciting proposals for the manufacture and acquisition of COLUMBIA Class Submarine Propulsor Tailcone Kits. The scope of work includes the procurement of materials, manufacturing, painting, and delivery of up to eight tailcone kits over a five-year period of performance, alongside associated engineering services for design reviews and changes. The contract utilizes a hybrid pricing structure consisting of Fixed Price Incentive Firm Target for hardware, Cost Plus Fixed Fee for engineering services and manufacturing strategy, and Cost No Fee for data and other direct costs. Award will be determined via a best-value tradeoff process, with technical capability weighted as the most significant factor, followed by cost, past performance, and small business participation. Key deliverables include a final certification package, a detailed manufacturing plan, and monthly status reports. Due to the critical nature of the components, the contract mandates strict adherence to Navy drawings, ISO 9001:2008 or AS9100 quality standards, and specific security protocols for handling Controlled Unclassified Information and classified data. Proposals must be submitted electronically via the PIEE Solicitation Module by February 1, 2027.
Ship Building and Repairing

POSTED

3 days ago

DEADLINE

in 3 months
View Details
NAICS: 541330
New
Federal
Synthetic Signature Generation (SSG) Support Services
Solicitation # N0016726R1006
The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting a single-award indefinite-delivery/indefinite-quantity (IDIQ) contract for scientific, engineering, and technical services to support Synthetic Signature Generation (SSG) based simulation systems. The scope includes the design, development, fabrication, integration, testing, fleet implementation, and maintenance of systems across five Navy fleet training categories: Submarine Team, Navigation, Surface, Surveillance, and On-Board. The contractor will operate within an Integrated Product Team (IPT) to provide technical engineering support to onsite maintenance personnel and support tactical testing and analysis for common simulation subsystems. The contract is structured with Cost-Plus-Fixed-Fee (CPFF) Level of Effort (LOE) CLINs and Cost Only Other Direct Costs (ODC) CLINs, with a total estimated labor requirement of 455,040 hours over a three-year period from August 10, 2027, to August 10, 2030. The procurement is a full-and-open competition evaluated on a best-value basis, prioritizing technical approach, management, and personnel over past performance and cost. Key requirements include a Top Secret facility clearance and Secret safeguarding for personnel, with specific Cyberspace Workforce (CWF) certifications aligned with DoDM 8570.01. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) using a rating scale from Exceptional to Unsatisfactory. Proposals must be submitted by November 9, 2026, and include detailed staffing plans and past performance narratives. The government has established a small business participation goal of 17 percent and requires the use of Wide Area Workflow (WAWF) for invoicing, with a 15 percent fixed fee withholding policy until a threshold of 100,000 dollars is reached.
Engineering Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 423440
New
Federal
Supply of Raw Material for Tailcone StudsThis subcontract involves the supply of raw material for tailcone studs to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The scope of work requires the sourcing of high-grade alloys or specialty steels that strictly adhere to the specifications outlined in Drawing Ref2.1-(DISTR D)808-T01-07-260807. The supplier is responsible for delivering certified raw material stock to the fabricator, accompanied by necessary material mill test reports and certifications of compliance. Managed by the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 423440. The place of performance is located in Bethesda, Maryland. Interested parties must note the response deadline of November 5, 2026, to be considered for this procurement.
Other Commercial Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
Federal
Manufacture of Tailcone (TC) StudsThis small business set-aside subcontract with the Naval Surface Warfare Center, Carderock Division, involves the precision machining and fabrication of 96 Tailcone Studs. The contractor is responsible for procuring raw materials and utilizing CNC machining centers and precision inspection tools to manufacture 8 shipsets of 12 certified studs, ensuring all parts adhere to the dimensions specified in Drawing Ref2.1-(DISTR D)808-T01-07-260807. Key requirements for the project include strict CMMC compliance and the delivery of a Technical Report for the TC Studs as part of CDRL A001. The work will be performed in Bethesda, Maryland, under NAICS code 332710, supporting prime contractors on Department of Defense projects.
Machine Shops

POSTED

5 days ago

DEADLINE

in 4 days
View Details
NAICS: 336611
New
Federal
Tailcone Studs
Solicitation # N0016727Q0001
The Naval Surface Warfare Center Carderock Division is seeking a small business contractor under NAICS code 336611 to manufacture and deliver 96 tailcone studs, organized as eight shipsets of 12 studs each. This firm fixed price contract requires the contractor to provide all labor, equipment, and materials to produce the hardware in accordance with specific technical drawings and ASME B1.3 System 21 thread acceptability standards. The contractor must maintain a quality system meeting ISO 9001:2015 or later and ensure all material certifications comply with DFARS specialty metals restrictions. Deliverables include the hardware, a digital final certification technical report, and certificates of conformance. The period of performance is three months from the date of award, with final delivery to West Bethesda, Maryland. Packaging requirements are stringent, requiring each shipset to be individually packaged with a hardcopy certification package and then consolidated into a single watertight, heavy-duty hard plastic container. Marking must adhere to MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique identification. Award will be granted to the responsible quoter with a technically acceptable quote deemed most advantageous based on price and past performance. The contract also mandates strict cybersecurity compliance, including CMMC requirements and the safeguarding of covered defense information.
Ship Building and Repairing

POSTED

5 days ago

DEADLINE

in 4 days
View Details
NAICS: 238220
New
Federal
Certified Installation of York Chill PumpThis subcontract involves the turn-key removal and installation of a York Chill Pump for prime contractors supporting the Naval Surface Warfare Center, Carderock Division in Bethesda, Maryland. The scope of work includes isolating and draining chill water pipes, removing the damaged pump, installing a new unit, and restoring chill water flow. To ensure a fully operational and leak-free system, the contractor must verify all wiring and perform comprehensive leak inspections. A critical requirement for this project is that all work must be performed by Certified Johnson Controls technicians. The opportunity is categorized under NAICS code 238220 and is associated with the Department of Defense. Interested parties must respond by November 6, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 423830
New
Federal
York Chill Pump Procurement and DeliveryThis subcontract involves the procurement and delivery of a brand-name York Chill Pump, specifically Model YLAA0080SJ46X, to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The selected provider is responsible for the acquisition of one new pump and must ensure compliance with Department of Defense unique identification requirements as specified by DFARS 252.211-7003 and MIL-STD-130. The contractor is tasked with managing all transportation and freight logistics to ensure the equipment reaches its FOB Destination in Bethesda, Maryland. This effort falls under NAICS code 423830 and is managed through the Department of Defense for the Nswc Carderock agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

6 days ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334416
Awarded
Federal
61--POWERSUPPLY
Solicitation # SPM7MC09T5139

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CHARGER,BATTERY
Solicitation # SPM7MC09T4982

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CONDITIONER,CHARGER
Solicitation # SPM7MC09T4985

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CONDITIONER,CHARGER
Solicitation # SPM7MC09T3952

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CHARGER,BATTERY
Solicitation # SPM7MC09T3802

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CHARGER,BATTERY
Solicitation # SPM7MC09T2344

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CHARGER,BATTERY
Solicitation # SPM7MC09T1922

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CONDITIONER,CHARGER
Solicitation # SPM7MC09T1625

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--POWERSUPPLY
Solicitation # SPM7MC09T1322

POSTED

almost 18 years ago

CLOSED

almost 18 years ago
View Details
NAICS: 334416
Awarded
Federal
Transformer
Solicitation # SPM7M508X0037

POSTED

about 18 years ago

CLOSED

about 18 years ago
View Details
NAICS: 334416
Awarded
Federal
Transformer
Solicitation # SPM7M508R0077

POSTED

about 18 years ago

CLOSED

about 18 years ago
View Details
NAICS: 334416
Awarded
Federal
61--CHARGER,BATTERY
Solicitation # SPM4M108TP404

POSTED

about 18 years ago

CLOSED

about 18 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS