Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 3, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

A--Scientific and engineering support for development, procurement, and life cycle support for the AN/BQH-9(V) Signal Data Recording Set , the AN/UNQ-9 Tactical Data Recorder.

Awarded
N0016708R0005Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Pure Water Southern California Direct Potable Reuse Testing Facility
Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility
Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330 for engineering services. The opportunity was posted on October 29, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, to submit their responses by the specified date.
Kiewit Infrastructure West Co.

POSTED

about 9 hours ago

DEADLINE

in 4 days
NAICS: 541330
New
Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency
Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency
Aanko Technologies Inc. is soliciting certified DBE and SBE sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency across San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. This opportunity is targeted toward firms specializing in administrative management, engineering services, computer systems design, and public relations documentation. Interested parties must submit their responses by November 17, 2026. The project emphasizes the need for specialized technical consultation and disaster recovery expertise to ensure the operational resilience of the utility agency. Primary coordination for this solicitation is managed by Liz Jordan-Wettstein at Aanko Technologies Inc.
Aanko Technologies Inc.

POSTED

about 9 hours ago

DEADLINE

in 18 days
NAICS: 541330
New
SLED
Infrastructure Asset Management ConsultantThe Infrastructure Asset Management Consultant subcontract involves providing professional analysis of road assets for prime contractors working on Bulloch County road asset management projects. The selected consultant will analyze roadway data to prioritize necessary repairs and integrate asset information with financial and work-order systems to facilitate accurate budgeting. To qualify, the consultant must possess Professional Engineering licensure and utilize specialized asset management software. The primary deliverables for this engagement include a comprehensive Road Asset Management Plan, detailed budgetary forecasts, and structured maintenance schedules. This opportunity is associated with the Bulloch County Board of Commissioners in Georgia under NAICS code 541330. Interested parties must submit their responses by November 20, 2026.
Bulloch County Board of Commissioners

POSTED

about 10 hours ago

DEADLINE

in 22 days
NAICS: 541330
New
SLED
Road Asset Management
Solicitation # FY27-ENGCP-002-6
The Bulloch County Board of Commissioners is soliciting Statements of Qualifications for project FY27-ENGCP-002-6, focused on Road Asset Management. The selected consultant will be responsible for collecting and analyzing field data, creating a road asset inventory, and developing a Capital Improvement Plan with an outlook extending to FY 35. The scope includes GIS database development, web-based mapping, and the identification of structural hazards and drainage failures to minimize safety risks and legal liability. All prime and sub-consultants must be GDOT Prequalified Contractors as of the submission deadline on November 20, 2026, at 3:00 PM EDT. Proposals are evaluated based on a composite scoring system that weights prime consultant experience and technical approach at 20% each, GIS capabilities at 20%, asset prioritization methodology at 15%, workload capacity at 15%, and past references at 10%. The highest-ranked consultant will be invited to negotiate a contract. Key requirements include a Principal-in-Charge with at least 10 years of industry experience and comprehensive insurance coverage, including professional malpractice and general liability of at least 1 million dollars per occurrence. Submissions are limited to ten pages, excluding mandatory forms and charts, and must include a Non-Collusion Affidavit and Bidder Declaration. Either party may terminate the resulting agreement with 30 days written notice.
Bulloch County Board of Commissioners

POSTED

about 10 hours ago

DEADLINE

in 22 days
NAICS: 541330
New
International
Civil Engineering Design and ReportingThis subcontract for Civil Engineering Design and Reporting, issued by the City of Tshwane, involves providing engineering inputs and civil infrastructure designs for prime contractors. The scope of work includes developing civil designs and analyzing property compliance with municipal by-laws and SANS standards utilizing CAD software. The selected provider is responsible for delivering comprehensive Civil Services Reports and detailed engineering designs. A critical requirement for this engagement is that all work must be led or reviewed by an ECSA registered Professional Engineer. The project will be performed in Tshwane-Pretoria, South Africa, under NAICS code 541330. Interested parties must submit their responses by the deadline of November 12, 2026.
City of Tshwane

POSTED

about 12 hours ago

DEADLINE

in 13 days
NAICS: 541330
New
International
Geotechnical Investigation ServicesThis subcontract for Geotechnical Investigation Services, issued by the City of Tshwane, involves performing subsurface explorations and soil analysis for prime contractors on professional engineering projects. The scope of work includes conducting site visits, field investigations, and soil sampling and testing utilizing laboratory equipment and drilling rigs. All geotechnical data must be analyzed in accordance with SANS standards and municipal by-laws, culminating in the delivery of a formal Geotechnical Investigation Report. The project is located in Tshwane-Pretoria, South Africa, and falls under NAICS code 541330. The solicitation was posted on October 29, 2026, with a response deadline set for November 12, 2026, at 08:00:00 UTC.
City of Tshwane

POSTED

about 12 hours ago

DEADLINE

in 13 days
NAICS: 541330
New
International
CoT RFP Event Q30-01-2026-27
Solicitation # Q30-01-2026-27
The City of Tshwane is soliciting a service provider for professional engineering services to support town planning subdivision application processes on city-owned properties. The scope of work is divided into three primary categories: Civil Services Reports, Geotechnical Investigations, and Route Determination Reports. All services must be led by a Professional Engineer registered with the Engineering Council of South Africa and must comply with the Gauteng Transport Infrastructure Act, National Building Regulations SANS 10400, and various SANS and SANRAL standards. The project follows a strict timeline, requiring an inception meeting within one month, draft reports within three months, final reports within five months, and project close-out within six months of appointment. The solicitation, numbered Q30-01-2026-27, closes on November 12, 2026, at 10:00. Awards are based on an 80/20 preferential point system in accordance with the Preferential Procurement Policy Framework Act and 2022 Regulations, with specific goals including points for women-owned, youth-owned, and disability-owned enterprises, as well as local economic participation. Evaluation occurs in four stages, starting with administrative responsiveness and a functionality score of at least 70 out of 100. Successful bidders must enter into a Service Level Agreement, with payment terms set at 30 days following the receipt of an invoice. Required submission documents include company registration, tax clearance or a CSD unique pin, and B-BBEE certification.
City of Tshwane

POSTED

about 12 hours ago

DEADLINE

in 13 days
NAICS: 541330
New
International
MEP (Mechanical, Electrical, Plumbing) Engineering
Healthcare Materials Management Services (HMMS)

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
International
Civil Engineering & Site Works Design
Healthcare Materials Management Services (HMMS)

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
International
Structural Engineering Services
Healthcare Materials Management Services (HMMS)

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 541330
New
SLED
TP-869
Solicitation # 49564
The New Jersey Department of Transportation Procurement is soliciting bids for contract TP-869, which focuses on construction inspection services for the Route 295/42/I-76 Direct Connection project. Specifically categorized as Construction Inspection C-6 Level B, this project falls under NAICS code 541330 and will be performed within the state of New Jersey. Interested parties must submit their responses by the deadline of November 5, 2026, at 3:00 PM. The solicitation was officially posted on October 29, 2026, and further details regarding the bidding process can be accessed through the Bid Express platform.
New Jersey Department of Transportation Procurement

POSTED

about 13 hours ago

DEADLINE

in 6 days
NAICS: 541330
New
International
Rail Infrastructure & Network Analysis
North Lincolnshire Council

POSTED

about 13 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

This amendment to solicitation N00167-08-R-0005 specifies that the contract for scientific and engineering support regarding the AN/BQH-9(V) Signal Data Recording Set and the AN/UNQ-9 Tactical Data Recorder will be awarded on a sole source basis. The intended recipient is the University of Washington Applied Physics Lab in Seattle, Washington. This decision is based on the authority that only a limited number of responsible sources can satisfy the agency requirements, as the University of Washington is currently designing, building, and maintaining these stand-alone systems and holds the proprietary design documentation and drawings. The request for proposal was scheduled for issuance on November 6, 2008, with a submission deadline 30 days later. While the University of Washington is the intended source, the agency allows other responsible sources to submit capabilities statements for consideration. The effort is managed by the Naval Surface Warfare Center Carderock under the Department of Defense.

General Info

Agency

Department Of Defense → Nswc Carderock

Contract Value

$0

NAICS

541330 - Engineering Services

Place of Performance

MD, USA

Set-Aside

NONE

Awardee

UNIVERSITY OF WASHINGTON

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

2 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

Response deadline changed from Jun 16, 2008 to Nov 6, 2008. The notice title changed. The notice description changed.

Justification (J&A)

Justification & Approval published

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
ContactsNo contacts available
OfficeBETHESDA, MD, 20817-5700, USA
Organization / AgencyDepartment Of Defense → Nswc Carderock
Office AddressBETHESDA, MD, 20817-5700, USA
ContactsNo contact information available

Full Description

Show more
The purpose of this amendment to solicitation N00167-08-R-0005 is toinclude the fact that this effort is expected to be awarded on a sole sourcebasis. The intended source is University of Washington/Applied Physics Lab(UWA) of Seattle, WA. The statutory authority permitting other than full andopen competition is 10 U.S.C. 2304(c)(1) pursuant to FAR 6.302-1--Only a LimitedNumber of Responsible Sources and No Other Supplies or Services Will SatisfyAgency Requirements. It is not feasible to have another source provide theseservices because the AN/BQH-9(V) SDRS, AN/BQH-5(V)4 DGS, and AN/UNQ-9 TDR arestand-alone systems currently being designed, built, upgraded and/or maintainedby UWA to measure acoustic and support data from designated SSN/SSBN shipsystems. In addition, UWA developed and holds all current design documentationand drawings for these systems that give them proprietary rights in data. TheRFP will be issued on November 6, 2008 to UWA and due d! ate for the proposals will be 30 days thereafter. All responsible sources maysubmit a capabilities statement which shall be considered by this agency. Seenote (22).

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 541330
New
Federal
Non-Recurring Engineering (NRE) and Technical SupportThis subcontract for Non-Recurring Engineering (NRE) and Technical Support supports prime contractors on projects for the Naval Surface Warfare Center Carderock Division within the Department of Defense. The scope of work focuses on initial engineering and tooling design, where the contractor is responsible for translating technical drawings into actionable manufacturing processes and comprehensive plans. Key activities include utilizing CAD/CAM software for process design and conducting virtual kickoff meetings to ensure technical alignment prior to production. The opportunity is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must adhere to the response deadline of November 12, 2026. The primary objective of the engagement is the successful delivery of all NRE activities and the establishment of technical alignment to facilitate efficient production cycles.
Engineering Services

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
Federal
Precision Machining of Device Piece PartsThis small business set-aside subcontract involves the precision machining of device piece parts for prime contractors supporting the Naval Surface Warfare Center Carderock Division. The scope of work includes the manufacture of body tubes, center mass, shim rings, top caps, and bottom caps using Government Furnished Materials in strict accordance with provided technical drawings. To qualify, contractors must possess CNC machining equipment and maintain an ISO 9001:2015 quality management system. Additionally, the provider must ensure full compliance with DFARS 252.204-7012 regulations for the delivery of all finished machined components.
Machine Shops

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333415
New
Federal
NSWCCD York Chill Pump Replacement
Solicitation # N0016727Q1002
The Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting quotes for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1) for York Chiller No. 1 in Building 157. This equipment is critical for providing chilled-water cooling to the Building 13 Server Rooms. The project requires the removal of the damaged pump and the installation of a York Chill Pump, Model YLAA0080SJ46X, Serial SEMM-609950. Due to the proprietary nature of the equipment, the contractor must utilize certified Johnson Controls technicians or representatives. The installation must be completed on or before December 18, 2026, at the NSWCCD facility in Bethesda, Maryland. This is a brand-name restricted procurement under full and open competition and is not set aside for small businesses. The government intends to award a single firm-fixed-price purchase order based on the lowest price technically acceptable method, evaluating quotations on a pass/fail basis for technical requirements and considering past performance via the Supplier Performance Risk System. All quotes must be submitted on official company letterhead, including all-inclusive pricing and business size, and sent via email to the contract specialist and contracting officer by 09:00 AM EDT on November 06, 2026. The contract includes specific requirements for item unique identification per MIL-STD-130 and electronic invoicing through the Wide Area WorkFlow system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 17 days
View Details
NAICS: 339999
New
Federal
Propulsor Device Machining
Solicitation # N0016727Q1004
The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting a firm fixed price contract for propulsor device part machining under solicitation N0016727Q1004. This requirement is a total small business set-aside under NAICS code 339999, with a business size limit of 550 employees. The scope of work involves the production of various components, including SIL top, bottom caps, and body tubes in quantities of 675 each, as well as R4 top caps, body tubes, bottom caps, shim rings, and center masses in quantities of 160 each. The period of performance extends from the date of award through July 18, 2027, with deliveries split between NSWC Carderock in Bethesda, Maryland, and the Portsmouth Naval Shipyard in Kittery, Maine. Award will be granted to the responsible quoter providing the lowest evaluated price among technically acceptable submissions, with technical acceptability determined on a pass/fail basis and past performance considered via the Supplier Performance Risk System (SPRS). Contractors must maintain a Quality Management System compliant with ANSI/ASQ/ISO 9001:2015 and adhere to strict packaging, cleaning, and marking standards, including MIL-STD-130 for item unique identification and MIL-STD-129 for shipment marking. Quote packages must include a cover sheet with the company name, point of contact, and CAGE code. Inquiries and specification drawing requests should be directed to Michael Bonaiuto, with a final quote submission deadline of November 12, 2026, at 12:00 PM Noon.
All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
COLUMBIA Class Tailcone Manufacture
Solicitation # N0016726R1005
The Naval Surface Warfare Center Carderock Division is soliciting proposals for the manufacture and acquisition of COLUMBIA Class Submarine Propulsor Tailcone Kits. The scope of work includes the procurement of materials, manufacturing, painting, and delivery of up to eight tailcone kits over a five-year period of performance, alongside associated engineering services for design reviews and changes. The contract utilizes a hybrid pricing structure consisting of Fixed Price Incentive Firm Target for hardware, Cost Plus Fixed Fee for engineering services and manufacturing strategy, and Cost No Fee for data and other direct costs. Award will be determined via a best-value tradeoff process, with technical capability weighted as the most significant factor, followed by cost, past performance, and small business participation. Key deliverables include a final certification package, a detailed manufacturing plan, and monthly status reports. Due to the critical nature of the components, the contract mandates strict adherence to Navy drawings, ISO 9001:2008 or AS9100 quality standards, and specific security protocols for handling Controlled Unclassified Information and classified data. Proposals must be submitted electronically via the PIEE Solicitation Module by February 1, 2027.
Ship Building and Repairing

POSTED

about 19 hours ago

DEADLINE

in 3 months
View Details
NAICS: 541330
New
Federal
Synthetic Signature Generation (SSG) Support Services
Solicitation # N0016726R1006
The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD) is soliciting a single-award indefinite-delivery/indefinite-quantity (IDIQ) contract for scientific, engineering, and technical services to support Synthetic Signature Generation (SSG) based simulation systems. The scope includes the design, development, fabrication, integration, testing, fleet implementation, and maintenance of systems across five Navy fleet training categories: Submarine Team, Navigation, Surface, Surveillance, and On-Board. The contractor will operate within an Integrated Product Team (IPT) to provide technical engineering support to onsite maintenance personnel and support tactical testing and analysis for common simulation subsystems. The contract is structured with Cost-Plus-Fixed-Fee (CPFF) Level of Effort (LOE) CLINs and Cost Only Other Direct Costs (ODC) CLINs, with a total estimated labor requirement of 455,040 hours over a three-year period from August 10, 2027, to August 10, 2030. The procurement is a full-and-open competition evaluated on a best-value basis, prioritizing technical approach, management, and personnel over past performance and cost. Key requirements include a Top Secret facility clearance and Secret safeguarding for personnel, with specific Cyberspace Workforce (CWF) certifications aligned with DoDM 8570.01. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) using a rating scale from Exceptional to Unsatisfactory. Proposals must be submitted by November 9, 2026, and include detailed staffing plans and past performance narratives. The government has established a small business participation goal of 17 percent and requires the use of Wide Area Workflow (WAWF) for invoicing, with a 15 percent fixed fee withholding policy until a threshold of 100,000 dollars is reached.
Engineering Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 423440
New
Federal
Supply of Raw Material for Tailcone StudsThis subcontract involves the supply of raw material for tailcone studs to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The scope of work requires the sourcing of high-grade alloys or specialty steels that strictly adhere to the specifications outlined in Drawing Ref2.1-(DISTR D)808-T01-07-260807. The supplier is responsible for delivering certified raw material stock to the fabricator, accompanied by necessary material mill test reports and certifications of compliance. Managed by the Department of Defense, this opportunity is designated as a total Small Business Set Aside under NAICS code 423440. The place of performance is located in Bethesda, Maryland. Interested parties must note the response deadline of November 5, 2026, to be considered for this procurement.
Other Commercial Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
Federal
Manufacture of Tailcone (TC) StudsThis small business set-aside subcontract with the Naval Surface Warfare Center, Carderock Division, involves the precision machining and fabrication of 96 Tailcone Studs. The contractor is responsible for procuring raw materials and utilizing CNC machining centers and precision inspection tools to manufacture 8 shipsets of 12 certified studs, ensuring all parts adhere to the dimensions specified in Drawing Ref2.1-(DISTR D)808-T01-07-260807. Key requirements for the project include strict CMMC compliance and the delivery of a Technical Report for the TC Studs as part of CDRL A001. The work will be performed in Bethesda, Maryland, under NAICS code 332710, supporting prime contractors on Department of Defense projects.
Machine Shops

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
Federal
Tailcone Studs
Solicitation # N0016727Q0001
The Naval Surface Warfare Center Carderock Division is seeking a small business contractor under NAICS code 336611 to manufacture and deliver 96 tailcone studs, organized as eight shipsets of 12 studs each. This firm fixed price contract requires the contractor to provide all labor, equipment, and materials to produce the hardware in accordance with specific technical drawings and ASME B1.3 System 21 thread acceptability standards. The contractor must maintain a quality system meeting ISO 9001:2015 or later and ensure all material certifications comply with DFARS specialty metals restrictions. Deliverables include the hardware, a digital final certification technical report, and certificates of conformance. The period of performance is three months from the date of award, with final delivery to West Bethesda, Maryland. Packaging requirements are stringent, requiring each shipset to be individually packaged with a hardcopy certification package and then consolidated into a single watertight, heavy-duty hard plastic container. Marking must adhere to MIL-STD-130 and MIL-STD-129, utilizing two-dimensional data matrix symbology for unique identification. Award will be granted to the responsible quoter with a technically acceptable quote deemed most advantageous based on price and past performance. The contract also mandates strict cybersecurity compliance, including CMMC requirements and the safeguarding of covered defense information.
Ship Building and Repairing

POSTED

3 days ago

DEADLINE

in 6 days
View Details
NAICS: 238220
New
Federal
Certified Installation of York Chill PumpThis subcontract involves the turn-key removal and installation of a York Chill Pump for prime contractors supporting the Naval Surface Warfare Center, Carderock Division in Bethesda, Maryland. The scope of work includes isolating and draining chill water pipes, removing the damaged pump, installing a new unit, and restoring chill water flow. To ensure a fully operational and leak-free system, the contractor must verify all wiring and perform comprehensive leak inspections. A critical requirement for this project is that all work must be performed by Certified Johnson Controls technicians. The opportunity is categorized under NAICS code 238220 and is associated with the Department of Defense. Interested parties must respond by November 6, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 423830
New
Federal
York Chill Pump Procurement and DeliveryThis subcontract involves the procurement and delivery of a brand-name York Chill Pump, specifically Model YLAA0080SJ46X, to support prime contractors on projects for the Naval Surface Warfare Center, Carderock Division. The selected provider is responsible for the acquisition of one new pump and must ensure compliance with Department of Defense unique identification requirements as specified by DFARS 252.211-7003 and MIL-STD-130. The contractor is tasked with managing all transportation and freight logistics to ensure the equipment reaches its FOB Destination in Bethesda, Maryland. This effort falls under NAICS code 423830 and is managed through the Department of Defense for the Nswc Carderock agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
RFP for Advanced Signatures Technologies (AST)
Solicitation # N0016726R3104
The Department of the Navy, Naval Surface Warfare Center Carderock Division (NSWCCD), is soliciting Advanced Signatures Technologies (AST) Support Services to integrate emerging software technologies into systems-of-systems for naval signatures tactical guidance, training, and synthetic simulation. The scope focuses on Big Data processing, cloud computing, predictive data analytics, and the development of software capabilities for Navy systems afloat and ashore. Technical requirements emphasize the use of Agile software development, DevSecOps, and adherence to Intelligence Community data standards. This effort involves both classified and unclassified programs, requiring personnel to hold Secret clearances at a minimum, with some roles requiring TS/SCI access. This requirement is a total small-business set-aside restricted to SeaPort-NxG Multiple Award Contract holders, with proposals submitted via the PIEE Solicitation Module. The contract is structured as a five-year period of performance consisting of a one-year base period and four one-year option periods. Pricing is based on a Cost-Plus-Fixed-Fee (CPFF) arrangement for labor and Cost No Fee for other direct costs. The total estimated level of effort over five years is approximately 200,640 hours for key personnel and 133,440 hours for non-key personnel. Award will be determined using a best-value trade-off approach, evaluating technical approach, management, personnel qualifications, and past performance.
Engineering Services

POSTED

4 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541330
Awarded
Federal
RECOVERY--C--Project Number 118339 - Geologic Inspection of Lock Foundation in Dewatered Cofferdam
Solicitation # W912P5-10-T-0017
W072 Endist Nashville

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Awarded
Federal
R--Purchase of a High Rotational Speed Friction Stir Welding machine. The ECS FSC system
Solicitation # N0016710T0136
Nswc Carderock

POSTED

about 16 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
WINDMILL TURBINE STUDY
Solicitation # N6024110RC052
Navsup Flt Logistics Ctr Jacksonville

POSTED

about 16 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
NCR Security Engineering and Technical Services
Solicitation # N65236_SNOTE_00012AC6
Niwc Atlantic

POSTED

about 16 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Awarded
Federal
A--Engineering Services in support of Adaptive Training for Submarine Navigation and Piloting Teams (AT-SNAP) Programs
Solicitation # N6660410Q4454
Nuwc Division Newport

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Closed
Federal
Small Frame Mobile Aircraft Trainer
Solicitation # F4D3D90210A016
FA4610 30 Cons Pk

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Awarded
Federal
C--ARCHITECT ENGINEER SERVICES FOR IDIQ CONTRACT FOR TECHNICAL SERVICES FOR INDEPENDENT EXTERNAL PEER REVIEWS WITHIN THE USACE CIVIL WORKS MISSION BOUNDARIES
Solicitation # W912QR-10-R-0037
W072 Endist Louisville

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Federal
RECOVERY--C--PROJECT NUMBER 008315, Inland Waterway Navigation Charts
Solicitation # W91278-10-287-ARRA
W074 Endist Mobile

POSTED

about 16 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Contract N63394-02-D-1250 Contract Extension
Solicitation # N6339410SNU52
Commanding Officer

POSTED

about 16 years ago

DEADLINE

N/A
View Details
NAICS: 541330
Awarded
Federal
R--Non-Brooks Act Construction Support Services
Solicitation # W9126G-10-R-0126
W076 Endist Ft Worth

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Awarded
Federal
RECOVERY - Construction Management Services, Mission Levee Improvements Project at Bentsen Palm Drive, United Irrigation Canal, and Penitas Railroad Crossing, Hidalgo County, TX
Solicitation # IBM10-67

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details
NAICS: 541330
Awarded
Federal
C--IDIQ Architect-Engineer Services Contract for Environmental Hazards, Seattle District & Northwest Division, WA.
Solicitation # W912DW-08-R-0026
W071 Endist Seattle

POSTED

about 16 years ago

CLOSED

about 16 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS