Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ACCELERATING RATE CALORIMETER (ARC) SYSTEM

Active
26-58039International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Research Council Canada is soliciting proposals for the supply of a high-precision Accelerating Rate Calorimeter system to support the safety and thermal analysis of advanced energy storage technologies. The system must meet stringent performance standards to enable accurate measurement of thermal runaway risks and reaction kinetics in next-generation battery materials and systems. All deliverables, including the fully operational ARC system with associated documentation and training, are required to be completed and received no later than December 15, 2026, approximately eight weeks following contract award. Proposals must be submitted by the deadline of September 1, 2026, with the solicitation number 26-58039 and posted on Canada Buys on August 4, 2026. Performance will occur at the NRC’s facility in Ottawa, Canada. The primary point of contact for inquiries is Hongli Wang, Contracting Authority, reachable at hongli.wang@nrc-cnrc.gc.ca. This procurement is open to all qualified offerors, with no set-aside restrictions, and is issued under the authority of the Government of Canada.

General Info

Supply high-precision ARC system for battery safety analysis, deliver by December 15, 2026, proposal deadline September 1, 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Ottawa, CAN

Set-Aside

NONE

Documents

(4)

26-58039_AMP_System de Calorimeter a taux accelere (CTA)_FR.pdf

PDF

26-58039_RFP_ARC Calorimeter_EN_final.pdf

PDF

26-58039_NPP_ARC Calorimeter_EN.pdf

PDF

26-58039_RFP_System de Calorimetre a taux accelere (CTA)_FR_final.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
Contacts
Hongli WangContracting Authority
contact@example.gov

Full Description

Show more
The National Research Council Canada (NRC) is seeking offers from Offerors to provide a high-precision Accelerating Rate Calorimeter (ARC) system to support the safety and thermal characterization of advanced energy storage technologies to the National Research Council Canada. All deliverables must be received no later than December 15, 2026, approximately eight weeks after contract award.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
DIBBS
DETECTOR, METAL FLAW
Solicitation # SPE4A5-26-T-326N
The contract pertains to the procurement of two Metal Flaw Detectors, part number 23036190, under NSN 6635-01-717-8633, issued by the Department of Defense through DLA. The delivery is required within 171 days from the contract award, with shipment FOB origin and final inspection conducted at the destination. The entire shipment must comply with stringent packaging standards outlined in ASTM D3951, though DLA Master List of Technical and Quality Requirements override any conflicting provisions. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA-specific packaging guidelines. The unit of issue is each, with no variance allowed in quantity, and the delivery address is the DDSP New Cumberland Facility in Pennsylvania. Sampling and quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes not explicitly defined are treated as major with a verification level of IV or AQL of 1.0. The contract incorporates all relevant technical and quality requirements from the DLA Master List, which control over any other referenced standards. The supplier must ensure complete removal of government identification from non-accepted items. The point of contact for inquiries is Brandy Coward, and the solicitation response deadline was August 12, 2026, with a required ship date of January 31, 2027, and original delivery expected by June 19, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
SLED
Supply of Weather Station and Monitoring ComponentsPutnam County Board of Commissioners is seeking to procure a weather station and associated monitoring components including TWM, ICM, and TSMs to support smart irrigation control and promote water conservation. The requirement is structured as a subcontract under NAICS code 334516 and is open for responses until September 10, 2026. The equipment will be used to collect real-time environmental data for optimizing irrigation systems, reducing water waste, and enhancing resource efficiency across county-managed landscapes. The place of performance and specific delivery details are not fully defined in the posted data, but the system must be capable of reliable field operation and integration with existing or planned smart irrigation platforms. All proposals must meet technical specifications for accuracy, durability, and data transmission capabilities to ensure effective long-term monitoring and water management outcomes.
Putnam County Board of Commissioners

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334516
New
International
University of Calgary - Advanced Contract Award Notice / Notice of Proposed Procurement - Load Cell Dual Microhardness Tester System
Solicitation # AB-2026-05475
The University of Calgary is seeking to procure a fully integrated, load-cell-based micro/macrohardness testing system designed for automated Vickers and Knoop hardness measurements, with capabilities for spatial hardness mapping, advanced image analysis, automated reporting, and seamless data export. The system must deliver high-precision testing across a wide range of materials and hardness scales, supporting research and industrial applications through reliable, repeatable measurements and comprehensive data handling. The procurement is being conducted under solicitation number AB-2026-05475, with a response deadline of August 11, 2026, at 5:00 PM MT, and is currently at the presolicitation stage to gather industry input prior to full solicitation. The contract will be awarded by the University of Calgary, with performance expected to occur in Alberta, and all inquiries should be directed to Michael Oiring, Senior Procurement Specialist, via email or phone.
University of Calgary

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Portable Threat-Detection Postal Scanner Supply
W7NF Uspfo Activity Mi Arng

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
Federal
Supply of Steris Autoclave Unit with AMSCO 600LS Steam SterilizerThe contract entails the procurement and delivery of a Steris Autoclave Unit equipped with an AMSCO 600LS Medium Steam Sterilizer, featuring an integrated steam generator that enables independent operation without reliance on external steam sources. This equipment is destined for the Boise VA Medical Center to enhance sterilization capabilities critical for medical safety and workflow efficiency. The unit must meet all technical and operational specifications to ensure reliable, compliant sterilization of surgical instruments and medical devices in a high-demand healthcare environment. The contract is classified as a subcontract under NAICS code 334516, indicating it pertains to medical equipment manufacturing. It was posted on August 4, 2026, with a response deadline set for August 7, 2026, suggesting a tight turnaround for submissions. The originating agency is the Department of Veterans Affairs through Rpo East (36C24E), and while specific performance location details are not provided, the delivery and installation are explicitly intended for the Boise VA Medical Center. The procurement supports the VA’s mission to maintain rigorous infection control standards by modernizing critical sterilization infrastructure.
Rpo East (36C24E)

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
Federal
Commercial Electrical Performance Monitoring System SupplyThe contract entails the supply of a commercially available electrical performance monitoring system designed for in-situ reliability testing of advanced packaging interposers, encompassing both an electrical analyzer and current-stress components necessary for comprehensive performance evaluation under operational conditions. The system must be fully functional, ready for immediate deployment, and capable of delivering precise, real-time data to assess the long-term reliability and integrity of interposer technologies used in high-performance electronic packaging. This subcontract, issued by the Department of Commerce NIST, has a response deadline of August 19, 2026, and was posted on August 4, 2026, under NAICS code 334516, which pertains to the manufacturing of electronic instrumentation. There is no set-aside designation, and the place of performance and point of contact details are unspecified, indicating flexibility in delivery and execution. The contract is intended to support advanced research and testing capabilities within the NIST framework, requiring the supplier to deliver a complete, integrated solution that meets defined technical requirements without customization or modification.
Department Of Commerce Nist

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
Federal
Sources Sought Optical Spectrum Analyzer
Solicitation # NB688000-26-02467
The National Institute of Standards and Technology (NIST) is conducting market research to identify vendors capable of supplying an Optical Spectrum Analyzer that meets specific technical requirements outlined in the attached specifications. This sources sought notice is not a solicitation, request for quotation, or binding commitment to award a contract; it is solely intended to gather information on potential suppliers before determining the appropriate acquisition method. Responses must include the company providing the product, the manufacturer’s name, and the country where the product is manufactured, along with capability statements limited to four pages containing product data sheets, typical lead times, and any additional relevant information. Proprietary information should be clearly marked, and no quotes will be accepted or considered at this stage. The requirement is classified under NAICS code 334516, with a small business size standard of 1,000 employees, and NIST is evaluating whether a small business set-aside opportunity exists based on responses received. All responsible sources—regardless of size—are encouraged to respond, but responses must demonstrate that the product can meet the stated specifications. The agency will use the collected information to inform future procurement decisions and determine if competition can be limited to small businesses if at least two qualified ones respond. Responses must be submitted electronically to Lisa Stevens at lisa.stevens@nist.gov no later than August 14, 2026, and must not include marketing brochures. The product’s country of origin is a critical piece of information for compliance and sourcing considerations.
Department Of Commerce Nist

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334516
New
Federal
Metrology-grade Chilled Mirror Dew Point Hygrometers
Solicitation # 1333ND26QNB680396
The National Institute of Standards and Technology (NIST), under the U.S. Department of Commerce, is soliciting two metrology-grade chilled mirror dew point hygrometers to enhance precision in laboratory measurements for national mass calibration standards. The equipment must meet stringent technical specifications including dew point accuracy of ±0.1°C, temperature accuracy of ±0.07°C, and reproducibility of ±0.05°C across both parameters, with a measurement range of –60°C to +20°C dew point and 0.1% to 100% relative humidity. Units must be new, shipped in original manufacturer packaging, and include all software and documentation; used, remanufactured, or gray-market items are prohibited. Delivery is required FOB destination to NIST’s Gaithersburg, Maryland facility within six to twenty weeks after receipt of order, with inspection and acceptance conducted onsite by NIST technical personnel based on verification of performance, physical dimensions, power requirements, and operational features such as RS-232 interface, PTFE sample circuit, and 3-stage thermoelectric cooling. Quotations must be submitted as firm-fixed-price offers in four electronic volumes: Technical Quotation demonstrating compliance with all technical requirements, Demonstrated Experience detailing three or more recent projects involving materially similar sputter coater systems, Price Quotation submitted separately via email, and Terms and Conditions acknowledging all solicitation provisions. Offerors are required to comply with FAR clauses 52.212-1, 52.212-3, 52.212-4, and 52.212-5, and must certify adherence to security requirements under FAR 52.204-25 and FAR 52.240-91, including avoidance of covered telecommunications equipment from prohibited entities. Noncompliance must be disclosed within 72 hours. The award will be made on a best-value trade-off basis, prioritizing technical capability and demonstrated experience over price, with no discussions anticipated. All submissions must be sent electronically to forest.crumpler@nist.gov and donald.collie@nist.gov by August 11, 2026, referencing solicitation number 1333ND26QNB680396, and must include the UEI and CAGE code. Invoices must be processed through the U.S. Treasury’s Invoice Processing Platform or directly to INVOICE@
Department Of Commerce Nist

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
6515--Research Equip (LAMb) - Medium Steam Sterilizer - BOISE | EDA: 9/25/26
Solicitation # 36C24E26Q0086
The Department of Veterans Affairs, Boise VA Medical Center, plans to procure a Steris Autoclave Unit with AMSCO 600LS Medium Steam Sterilizer on a sole source basis under FAR 6.302-1 due to its unique integrated steam generator, which is not available in competing models. This feature ensures a reliable and independent steam supply, critical for consistent sterilization cycles and minimizing operational downtime unrelated to building infrastructure limitations. The unit’s chamber dimensions are specifically suited to accommodate up to four caging systems simultaneously, significantly enhancing workflow efficiency compared to other available alternatives, and its compatibility with existing caging setups makes it the only viable option for current operations. This notice of intent is not an invitation for competitive bids, but responsible sources may submit capability statements by August 7th, 7 AM EST to Stacy Taylor at Stacy.Taylor@va.gov, with no telephone inquiries accepted. The government retains full discretion to proceed without competition based on responses received. The solicitation number is 36C24E26Q0086, with a NAICS code of 334516, and the procurement is managed by the RPO East office under the Department of Veterans Affairs, with the point of contact listed as Lynn M Portman.
Rpo East (36C24E)

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
Federal
Argon Ion Mill Polishing System
Solicitation # N0017326Q5265
The Naval Research Laboratory intends to award a sole source purchase order to NANOSCIENCE INSTRUMENTS for an Argon Ion Mill Polishing System and accessories under the NAICS code 334516, with a size standard of 1000 employees, and the Federal Supply Code 6640. This acquisition will be conducted using Simplified Acquisition Procedures in accordance with FAR 12.201-1, as the estimated value does not exceed the $350,000 threshold. The procurement is not open for competitive bidding, as the agency has determined that only this one source can meet its specific requirements. Interested parties may submit information within fifteen calendar days of the notice's publication demonstrating why competitive procurement would benefit the government, but such submissions must include clear and convincing evidence; responses will be evaluated solely to determine whether competition is warranted, and the government retains full discretion over its decision. No reimbursement will be provided for costs incurred in submitting capability information. The point of contact for all correspondence is Richard Key, whose email must be used in all communications, and the solicitation number N0017326Q5265 must be referenced in the subject line. The notice was posted on August 4, 2026, with a response deadline of August 6, 2026, and the performance location is in Washington, D.C.
Naval Research Laboratory

POSTED

about 18 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334516
New
Federal
6640-- QUANTStudio 5 Real Time PCR system
Solicitation # 36C24626Q0805
The Department of Veterans Affairs, through VISN 6 Network Contracting Office 6, is conducting market research under a Sources Sought notice to determine commercial availability and contractor capabilities for the acquisition of two Applied Biosystems QuantStudio 5 Real-Time PCR Systems, along with annual preventative maintenance and quality assurance services, to replace existing 7500 Fast Dx instruments. This is not a solicitation and no binding contract will result from responses; the purpose is solely to assess market capacity, identify qualified sources—including small businesses registered in the SBA’s Dynamic Small Business Search—and inform future procurement decisions. The requirement is strict: only the original Applied Biosystems QuantStudio 5 system will be accepted, with no substitutions or equivalents permitted, due to the need for compatibility with existing validated workflows, reagents, software, and laboratory procedures. The contract includes trade-in of the current instrument, full installation, training, warranty, and compliance with all manufacturer specifications. Responses must detail the company’s SAM registration, SBA small business status, relevant certifications, and a capabilities statement confirming the ability to meet all technical and service requirements, including proper calibration, performance verification using RNase P plates, system diagnostics, computer maintenance, and timely submission of service documentation within one hour of completion. The NAICS code is 334516 with a size standard of 1,000 employees, and responses will inform potential set-asides under 38 U.S.C. 8127 and 8128 for Service-Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses if the rule of two is satisfied. All submissions must be emailed to Krisanne Dernago by August 12, 2026, at 10:00 a.m. EST, and failure to register in SAM or the SBA DSBS database will disqualify consideration. The Government reserves the right to modify the Performance Work Statement and will only issue a formal solicitation if market research indicates sufficient competition and suitability.
246-NETWORK Contracting Office 6 (36C246)

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
6640--NEW - CTX Quant Studio 7 Pro Laboratory Equipment
Solicitation # 36C25726Q0816
The Department of Veterans Affairs is seeking to procure one Applied Biosystems QuantStudio 7 Pro Real-Time PCR System or an equally capable alternative through a firm-fixed-price contract under commercial acquisition procedures. The equipment will be delivered and installed at the Central Texas Veterans Health Care System in Temple, Texas, to support advanced molecular research aimed at understanding biological differences between Veteran and civilian populations, with a focus on personalized medicine. The contract includes a base period for delivery, installation, and on-site training, followed by four optional one-year periods for annual preventive maintenance services, potentially extending the contract to five years total. The requirement is specified on a brand-name-or-equal basis, allowing alternatives that meet or exceed the technical performance criteria outlined in the Statement of Work, provided offerors submit detailed comparative documentation. This acquisition is unrestricted and open to all responsible sources, with no set-aside for small, veteran-owned, or other socioeconomic categories, following a market research determination that a reasonable expectation does not exist for two or more qualified Veteran-Owned Small Businesses to submit competitive offers at a fair price. The procurement follows FAR Part 12 commercial item procedures and incorporates applicable VA Acquisition Regulation deviations and RFO FAR guidance. Evaluation will be based on best-value or lowest-price technically acceptable criteria, with technical acceptability assessed against the prescribed salient characteristics. All offerors must comply with standard certifications including Buy American Act and Trade Agreements Act requirements, as well as security prohibitions. The contract is managed by the Department of Veterans Affairs Network Contracting Office 17 in San Antonio, with delivery and performance occurring at the Olin E. Teague VA Hospital in Temple, Texas.
257-NETWORK Contract Office 17 (36C257)

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 611430
New
International
QCM System Installation and Training ServicesThe contract entails the provision of comprehensive training and technical support for the operation, calibration, and maintenance of a QCM system, encompassing full setup and commissioning services to ensure optimal functionality and user proficiency. This subcontract, issued by the National Research Council of Canada under the Government of Canada, is focused on delivering expert-guided on-site support to enable seamless integration and sustained operation of the system at the place of performance in Mississauga. The services are designed to equip personnel with the necessary skills to independently manage system performance, perform routine calibrations, and execute preventative maintenance procedures, minimizing downtime and maximizing system reliability. The opportunity is open for response until August 31, 2026, and is classified under NAICS code 611430, indicating its alignment with professional and technical training services. Although the solicitation number and point of contact information are not provided, interested parties must submit proposals prior to the stated deadline. The contract does not specify any set-aside categories, making it open to eligible contractors without restriction based on business size or ownership type. Participation requires demonstrated expertise in QCM technologies and a proven capacity to deliver hands-on technical training and field support in a government-operated environment.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 334516
New
International
Benchtop Quartz Crystal Microbalance (QCM) System SupplyThe National Research Council of Canada is seeking a subcontractor to supply and deliver a benchtop quartz crystal microbalance system designed for high-precision mass measurement in interfacial process research. This equipment must meet rigorous technical specifications to enable accurate, real-time monitoring of mass changes at surfaces, supporting advanced scientific investigations in fields such as materials science, biochemistry, and surface chemistry. The system must be fully integrated, calibrated, and ready for immediate operational use upon delivery, with all necessary software, sensors, and accessories included to ensure seamless functionality in a laboratory environment. The contract is open for proposals with a response deadline of August 31, 2026, and the anticipated place of performance is Mississauga, Canada. The North American Industry Classification System code 334516 indicates this procurement is categorized under instrumentation manufacturing, specifically for laboratory and analytical equipment. This solicitation is issued as a subcontract under the Government of Canada’s procurement framework, and no specific set-aside provisions have been designated. All responses must be submitted by the stated deadline to be considered, and delivery must align with the technical and logistical requirements necessary for reliable deployment in a high-research demanding setting.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 334516
New
International
Multichannel Quartz Crystal Microbalance System
Solicitation # 25-58128
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 333515
New
International
Fiber Laser Cutter for Aluminum and Copper
Solicitation # 26-58021
The National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system capable of reliably cutting aluminum and copper for battery prototype components through solicitation 26-58021, with a submission deadline of July 27, 2026 at 14:00 EDT. The system must feature a fiber-type laser with a minimum power output of 3000W and a 10:1 operational turn-down ratio, a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better. It must cut 4.064mm aluminum and 3.175mm copper at speeds of at least 1m/min, include an auto-tracking laser head, a fully enclosed work area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system against back-reflected laser energy. The scope includes delivery, installation, commissioning, and training, with all deliverables required to be received at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. The system must be delivered under Incoterms® 2020 Delivery at Place (Vancouver, BC), with the vendor responsible for all shipping, customs, and duty costs. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and offers must be submitted electronically in three distinct sealed attachments labeled Technical Offer, Financial Offer, and Forms, with a total message size not exceeding 10MB; compressed files, links, or physical submissions are prohibited. The contract is awarded on the basis of the lowest evaluated price among compliant offers, with all mandatory technical requirements identified with the word “must” serving as pass/fail gates; failure to meet these disqualifies an offer from financial review. Offerors must submit sample cuts within 15 business days of receiving materials, accompanied by a detailed cutting report. Acceptance of the system by Canada requires a formal written request from the contractor, followed by a 30-day inspection period; rejection allows Canada to require corrections at the contractor’s expense without additional cost. Payment terms specify undisputed invoices will be settled within 30 days of receipt in acceptable form, with 15% withholding for non-resident contractors unless a CRA waiver is provided. Invoices must be emailed
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 238220
New
International
U-61 Cooling Plant Optimization
Solicitation # 25-58079
The National Research Council Canada is seeking qualified Canadian contractors to perform the U-61 Cooling Plant Optimization project at 1920 Research Private, Building U-61, Ottawa, Ontario. The contract requires the design, supply, installation, and commissioning of cooling system components to enhance operational efficiency and ensure compliance with applicable technical and safety standards, with all work to be completed within 16 weeks from the date of tender acceptance, targeting an anticipated start date of August 26, 2026. Only suppliers registered as Canadian Contractors are eligible to bid, as this solicitation is governed by the Policy on Reciprocal Procurement, and offers from non-trading partner countries will be rejected. Bidders must attend one of two mandatory site visits on July 29 or 30, 2026, at 10:00 a.m. EDT, and sign the attendance sheet; failure to do so will result in bid rejection. All personnel, including subcontractors, must obtain the required security clearances—ranging from Reliability Status to Top Secret—and comply with strict safeguarding measures for PROTECTED and CLASSIFIED information; non-compliance will deny site access, and the contractor assumes all associated delays and costs. Contractors must adhere to safety protocols during site visits and on-site work, including wearing approved personal protective equipment, and must ensure all personnel are properly trained, wear NRC-issued identification badges, and are subject to immediate removal for safety violations. The evaluation of bids will be based on five equally weighted technical factors: Quality of Workmanship, Time, Project Management, Contract Management, and Health and Safety, each scored from 0 to 20 using adjectival ratings of Unacceptable, Not Satisfactory, Satisfactory, and Superior; the award will be determined through a trade-off process considering overall technical merit. The contractor is required to submit comprehensive deliverables including commissioning reports, maintenance documentation, training programs, electrical and piping labels, and inventory records in English and computer-compatible formats, all in accordance with CSA, ASME, UL, AWWA, and other specified standards. All submissions must be emailed to Max.Grohs@nrc-cnrc.gc.ca as individual, non-compressed attachments prior to the August 18, 2026 deadline, with no external links or ZIP files permitted. The contract includes stringent administrative and financial requirements, including compliance with the Government of Canada’s Integrity Regime, proper accounting practices, and statutory declarations
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
International
Multichannel Quartz Crystal Microbalance System
Solicitation # 25-58128
The National Research Council Canada is soliciting proposals for the procurement of a single benchtop quartz crystal microbalance system designed for advanced material analysis. This procurement is issued under solicitation number 25-58128 Version B, with offers required to be submitted by August 31, 2026, at 7:00 PM Eastern Time. The system must meet specified technical requirements to support precision measurements in research environments, and the delivery location is designated as Mississauga, Canada. The procurement is open to all qualified offerors without set-aside restrictions and is managed by the Government of Canada through the NRC. Primary contact for inquiries is Hongli Wang, Contracting Authority, reachable at hongli.wang@nrc-cnrc.gc.ca. The solicitation was posted on August 4, 2026, and all details are publicly accessible through the Canada Buys portal.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 333248
New
International
Large Slurry Mixer
Solicitation # 26-58093
The National Research Council of Canada is soliciting a large slurry mixer for use in its Clean Energy Innovation Research Center to support the development of viscous battery slurries for a prototyping line, with the goal of enhancing efficiency and operational versatility. This procurement, under solicitation number 26-58093, is governed by the Policy on Reciprocal Procurement, which restricts eligibility exclusively to Canadian suppliers and suppliers from applicable trading partners; offers from non-trading partner entities will be rejected. The contract requires the delivery of a single large slurry mixer meeting strict technical specifications, including a maximum footprint of 2000 kg, dimensions no greater than 3000 mm in depth and height and 2000 mm in width, and a stand-alone, floor-mounted design operable by a single person. The system must include a cooling/heating capacity of at least 5000 kCal/h (6 kW) at 10°C with automatic temperature control and real-time temperature display on a control panel. The full scope includes final design and drawings for NRC approval, successful Factory Acceptance Test (FAT), delivery of the complete mixer with all accessories and documentation, on-site installation, Site Acceptance Test (SAT) approval, and comprehensive operator training. All deliverables must be completed within 11 months of contract award, with key milestones set at two months for design approval, five months for FAT completion, and eight months for delivery. Payment is on a firm unit price, fixed-price basis, with no advance payments and invoices submitted only after each deliverable is completed. The contract includes a mandatory 12-month warranty or the contractor’s standard warranty, whichever is longer, and requires compliance with environmentally preferable packaging standards and the NRC’s Security Requirements Checklist. The contractor must comply with Canadian federal ethics standards, including the Conflict of Interest Act and the Values and Ethics Code for the Public Service, and is subject to audit and oversight under the Accounts and Audit provisions. Payment terms specify 30 days for undisputed invoices, with 15 percent withholding for non-resident contractors unless a valid waiver is provided by the Canada Revenue Agency. The mixer will be delivered under Incoterms® 2020 DAP to 75, de Mortgage Boulevard, Boucherville, QC, J4B 6Y4, with shipping accessible only via de Lauzon Street. Proposals must be submitted electronically in three distinct sections—Technical Offer, Financial Offer,
All Other Industrial Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 334513
New
International
26-58075 Radio Frequency (RF) Test and Measurement Suite
Solicitation # 26-58075
The National Research Council of Canada is seeking a fully integrated Radio Frequency (RF) Test and Measurement Suite comprising a signal generator capable of producing signals from 10 kHz to 50 GHz with an integrated frequency multiplier capable of extending output to 110–170 GHz, a signal/spectrum analyzer with a measurement range up to 50 GHz, and a vector network analyzer operating up to 44 GHz. The system must function as a unified solution with centralized control and be designed for high-precision applications in quantum metrology, where phase noise, harmonic distortion, and long-term frequency stability are critical to accurate sensor operation. The signal generator must accept external 10 MHz or 100 MHz references for enhanced stability, and the multiplier must be seamlessly controllable through the same interface as the generator. The spectrum analyzer must accurately characterize signal strength, harmonics, and spurious emissions, while the vector network analyzer must measure both magnitude and phase of RF components across temperature conditions, including cryogenic environments. All equipment must comply with mandatory technical specifications covering frequency range, phase noise, harmonic levels, phase stability, and multiplier functionality, with full compliance required to be considered for award. The solicitation follows a Lowest Price Technically Acceptable (LPTA) procurement strategy, where only offers meeting all mandatory technical criteria are evaluated, and the award will be granted to the lowest-priced compliant proposal. Proposals must be submitted electronically by August 14th, 2026, at 2:00 PM EDT, as two separate, unzipped files labeled “Technical Offer” and “Financial Offer,” with a combined size not exceeding 10 MB. Delivery of the completed suite is due by January 15th, 2027, at the NRC facility in Ottawa, under Incoterms® 2020 DAP terms, with full documentation—including operating procedures, remote command sets, troubleshooting guides, and technical specifications—required in both PDF and hard copy. The contract includes an irrevocable option for additional goods or services under the same terms, and contractors must comply with Canadian reciprocal procurement rules, anti-forced labor policies, international sanctions, and the Federal Contractors Program for Employment Equity. Environmental standards mandate reusable, recyclable, or returnable packaging, and all submissions are subject to review and final acceptance by the Government of Canada. Proposals must also include completed certifications affirming integrity, eligibility, and compliance with all contractual conditions, and only Canadian suppliers or those
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 423490
New
International
Calibration Equipment and Standards SupplyThe contract involves the supply of NIST-traceable calibration standards, reference materials, and portable calibration devices over a three-year period, ensuring precision and traceability for metrological applications. The vendor is expected to provide comprehensive certification for all delivered items and implement a robust inventory management system to track usage, calibration cycles, and compliance. All materials must meet recognized international standards and be accompanied by documentation verifiable through NIST traceability. This is a subcontract under the Government of Canada, specifically managed by the National Research Council of Canada, with performance required within Canada. The solicitation was posted on August 1, 2026, with proposals due by August 25, 2026, and the NAICS code 423490 indicates a focus on commercial equipment and supplies distribution.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
International
Calibration Documentation and Compliance ReportingThe contract involves the generation, management, and archival of audit-ready calibration reports that maintain full traceability to SI and NIST standards, ensuring compliance with rigorous metrological requirements. The scope requires seamless integration of these reports into established quality management systems to support consistent documentation, regulatory adherence, and internal or external audit preparedness. All processes must guarantee data integrity, version control, and retrievability across the calibration lifecycle to meet international best practices in laboratory accreditation and quality assurance. The work is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a North American Industry Classification System code of 541380, indicating it falls under professional, scientific, and technical services. The solicitation was posted on August 1, 2026, with responses due by August 25, 2026. Performance is to be carried out within Canada, and while no specific location or point of contact is provided, the obligation to align with national standards and federal compliance expectations implies a high level of precision and accountability in execution.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 21 days
View Details
NAICS: 811211
New
International
Emergency Calibration and On-Demand Response ServicesThe contract demands the provision of 24/7 emergency calibration services to respond rapidly to unplanned equipment failures within a GMP-compliant environment, ensuring uninterrupted operations and regulatory adherence. Contractors must be prepared to deploy qualified personnel at any time to recalibrate critical measurement instruments, minimizing downtime and maintaining product quality and process integrity. Service levels require immediate response capabilities, with strict protocols for documentation, traceability, and compliance with GMP standards throughout all calibration activities. The opportunity is structured as a subcontract under the National Research Council of Canada, part of the Government of Canada, with performance obligations located across Canada. The solicitation was posted on August 1, 2026, and responses are due by August 25, 2026, under NAICS code 811211 for industrial and commercial equipment repair and maintenance. Bidders must demonstrate proven experience in regulated environments, capable of meeting stringent response time expectations and maintaining rigorous calibration records acceptable to health and safety authorities. Successful vendors will be expected to integrate seamlessly with existing facility operations and uphold the high standards required for pharmaceutical, biotech, or similar GMP-regulated manufacturing settings.
Consumer Electronics Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 21 days
View Details
NAICS: 811211
New
International
Scheduled Calibration Services for Laboratory and Manufacturing InstrumentsThe contract requires the performance of routine, on-site calibration services for 365 scientific and industrial instruments during scheduled shutdown periods to ensure continued compliance with Good Manufacturing Practices and equipment validation standards. All calibration work must be conducted in Canada, with services aligned to operational downtime to minimize disruption to critical laboratory and manufacturing processes. The scope emphasizes precision, regulatory adherence, and timely execution to support ongoing quality assurance protocols in a regulated environment. The solicitation is classified as a subcontract under NAICS code 811211 and is managed by the National Research Council of Canada, operating under the Government of Canada. The opportunity was posted on August 1, 2026, with a response deadline of August 25, 2026. Proposals must demonstrate technical capability, experience with GMP-regulated environments, and the ability to coordinate calibration activities within tight operational windows. No set-aside provisions are specified, and all interested parties are expected to meet the stringent calibration and documentation requirements necessary for federal compliance.
Consumer Electronics Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 21 days
View Details