Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ADJUSTER ASSEMBLY

Active
SPE7M4-26-T-303JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an ADJUSTER ASSEMBLY with the NSN/Part Number 2030-01-208-3198, for a quantity of three units, with a delivery requirement of 305 days after order. The solicitation, identified as SPE7M4-26-T-303J, was posted on August 5, 2026, with bids due by August 17, 2026, and is managed by the Fluid Handling Division of the Department of Defense. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA export control training and approved access, are permitted to handle the data. The place of performance is Tracy, California, 95304-5000, and the NAICS code is 333923. The contractor must also be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 accredited Third-Party Assessment Organization. Point of contact for the solicitation is Rory O'Reilly, reachable at the provided email and phone number.

General Info

Procure three ADJUSTER ASSEMBLIES, NSN 2030-01-208-3198, delivery in 305 days, CMMC Level 2 and export control compliance required.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-303J Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADJUSTER ASSEMBLY
ADJUSTER ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2030-01-208-3198 Quantity: 3 AY Purchase Request: 7017227634QTY: 3 Delivery: 305 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333923
New
Federal
Overhead Crane Fabrication & Supply
FA8227 Afsc Ol H Pzim

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
Federal
15853 - Vandenberg SFB Hoist-Trolly-Crane Replacement
Solicitation # FA8227-26-Q-1004
The contract solicitation titled 15853 - Vandenberg SFB Hoist-Trolly-Crane Replacement seeks qualified vendors to provide replacement hoist-trolley-crane systems at Vandenberg Space Force Base in Lompoc, California, with a NAICS code of 333923 for crane and hoist manufacturing. The solicitation, issued under number FA8227-26-Q-1004, was posted on August 6, 2026, and responses are due by August 19, 2026, at 9:00 PM Eastern Time. This is a sources sought notice with no set-aside applied, meaning all small and large businesses are eligible to respond. Performance must occur at the specified location in Lompoc, CA, while the contracting office is located at Hill Air Force Base, Utah. Primary point of contact is Hugo Ruano Gutierrez, reachable via email or phone, with Lauren Reigenborn as secondary contact for additional inquiries. The solicitation is publicly accessible through the SAM.gov portal for interested parties to review details and prepare submissions.
FA8227 Afsc Ol H Pzim

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333923
New
DIBBS
Defense-Grade Molded Plastic Component SupplyThe contract obligates the supplier to manufacture and deliver 16 units of a military-spec molded plastic component identified by NSN 3950011673909, with strict adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking requirements to ensure full compatibility with Department of Defense logistics and handling protocols. This is a subcontract under a Women-Owned Small Business Set-Aside, targeting qualified WOSB firms, and falls under the NAICS code 333923, indicating specialization in industrial machinery and equipment manufacturing. The place of performance is designated as San Diego, CA, with delivery and compliance obligations tied to this location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for submissions. While no specific point of contact or agency office address is listed, the contracting entity is identified as the Department of Defense under the organization title CONSTRUCTION & EQUIPMENT MANU & CON. The contract is accessible through the DIBBS portal via a public link, and all bidders must ensure their proposals meet the technical, packaging, and marking standards mandated for military supply chains, with no deviations permitted.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
Tensioner Pulley Assembly Supply and DeliveryThe contract entails the procurement and delivery of 56 Tensioner Pulley Assemblies to meet exacting military specifications for packaging, labeling, and transportation. All units must comply with Department of Defense standards to ensure readiness and interoperability within military logistics systems. The work is to be performed under a subcontract arrangement, with the place of performance designated as New Cumberland, Pennsylvania, zip code 17070-5002, indicating the final destination or primary handling location for the delivered items. The North American Industry Classification System code 333923 confirms the industrial category as Other Engine Equipment Manufacturing, aligning the supplier’s capabilities with the technical demands of the assemblies. Responses are due by August 17, 2026, following a posting date of August 5, 2026, providing potential bidders a 12-day window to prepare and submit proposals. The sourcing authority is the Department of Defense through the agency Construction & Equipment Manu & Con, and all interactions must be conducted via the official DIBBS portal linked in the contract details.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
Chain Hoist Manufacturing and SupplyThe contract requires the manufacture and supply of eight chain hoists under the National Stock Number 3950-01-178-2932, with strict adherence to technical specifications, packaging standards, labeling requirements, and documentation protocols set by the Defense Logistics Agency. All items must meet government-grade quality and compliance benchmarks to ensure suitability for military use. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 333923 identifies the industry as Other Industrial Machinery Manufacturing, aligning the work with specialized machinery production capabilities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, providing a twelve-day window for submissions. Performance of the contract will be executed at New Cumberland, Pennsylvania, with the zip code 17070-5002 designated as the place of performance. The contract falls under the Department of Defense, specifically the organization titled CONSTRUCTION & EQUIPMENT MANU & CON, indicating oversight by a defense logistics entity focused on equipment procurement. Bidders must access the DIBBS platform through the provided link to submit proposals, ensuring all submissions are processed within the official defense acquisition system. Failure to comply with any technical, regulatory, or procedural requirement will result in disqualification.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
FRAME, HOIST
Solicitation # SPE8EE-26-T-2274
The contract pertains to the procurement of seven FRAME, HOIST units under solicitation number SPE8EE-26-T-2274, with a specified delivery timeframe of 167 days after award. The item is identified by NSN 3950-01-680-9587 and linked to purchase request 7017757573. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers, and the controlling revision depends on whether the acquisition is simplified or large, as defined by solicitation or amendment dates. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information under RD003 requirements. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense, specifically the Construction & Equipment Manufacture and Construction organization. Primary point of contact is Philip Ferrara, reachable via email and phone listed in the contract data.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
SCREEN, INTAKE COVER, WI
Solicitation # SPE8EE-26-T-2233
The contract requires the procurement of 27 units of a screen intake cover for a winch, with delivery scheduled 167 days after order issuance to the Defense Logistics Agency Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 3950-01-169-8697 and is subject to stringent defense supply chain controls, including compliance with MIL-STD-129 for marking and barcoding, MIL-STD-2073-1E for packaging, and RP001 for DLA-specific packaging requirements. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons unless authorized by the Department of State or Commerce, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization. The contract mandates compliance with cybersecurity standards including NIST SP 800-171, safeguarding covered defense information per DFARS 252.204-7012, and requires CMMC Level 2 certification for the offeror as a third-party assessment organization. All offers must be submitted electronically through the DLA Internet Bid Board System prior to the August 17, 2026 deadline under solicitation SPE8EE-26-T-2233, with contract execution anticipated as a firm-fixed-price arrangement. The contractor must adhere to hazardous materials labeling requirements under DFARS 252.223-7001, submit documentation via WAWF for payment, and ensure compliance with FAR and DFARS clauses covering employment equity, trafficking prevention, electronic verification, sustainable products, payment acceleration for small businesses, subcontracting, inspection at destination, and prohibitions on sourcing from Chinese military companies or unauthorized telecommunications equipment. No evaluation factors or weights are specified, indicating potential award under a lowest price technically acceptable methodology, and all representations required under SAM, including UEI and CAGE codes, size status, and socioeconomic certifications, must be current and accurately disclosed.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
SLING, MULTIPLE LEG
Solicitation # SPE8EE-26-T-2264
This contract is for the procurement of three multiple-leg slings with NSN 3940-01-699-9168 and part number D3340 002 from TAYLOR DEFENSE PRODUCTS, LLC, under solicitation SPE8EE-26-T-2264. The items must be delivered FOB origin within 167 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination warehouse in Tracy, California. All packaging must comply with ASTM D3951, but must strictly adhere to the superior requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as defined by RP001. The unit of issue is each, with a total contract value of $9.00, and the delivery must be completed by February 1, 2027, following the original required delivery date of December 13, 2026. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the sole point of contact for the contract is Philip Ferrara, reachable via phone and email provided. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
FAIRING, RESCUE HOIST, H
Solicitation # SPE8EE-26-T-2251
The contract pertains to the procurement of seven units of a fairing and rescue hoist for helicopter applications, identified by part number 42315-120 and NSN 3950-01-377-3199, supplied by Goodrich Corporation under CAGE code 3HRL4. Delivery is required in 167 days with a firm delivery date of February 1, 2028, and the items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the supplier must comply with DLA’s packaging standards, which mandate adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for DLA packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stipulated. The unit of issue is each, with a total contract value of $7.00 per unit, totaling $49.00, and the procurement is governed under solicitation SPE8EE-26-T-2251, issued on August 5, 2026, with a response deadline of August 17, 2026. The end destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must conform to DLAD Proc Note C19 for freight and C20 for first destination. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Physical identification of the bare item must include the contractor’s name, CAGE code, and part number in accordance with RQ017. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with the revision in effect on the RFP issue date controlling unless amended. The product falls under NAICS code 333923 for defense equipment manufacturing and is classified as a federal acquisition under the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
HOIST, CHAIN
Solicitation # SPE8EE-26-T-2295
The contract specifies the procurement of 22 chain hoists with NSN 3950012380504 under solicitation SPE8EE-26-T-2295, with delivery required within 305 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and RP001, while the materials must be marked in accordance with MIL-STD-130N. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. First Article Testing is mandatory, requiring one unit from the first ten produced to be tested by the contractor and witnessed by the Government Quality Assurance Representative; the resulting report must comply with MIL-STD-831 and be submitted within 90 days of award. The contractor must also meet QR No. 1201 for general quality assurance and QR No. 12301088 for specific testing procedures. Cybersecurity requirements include CMMC Level 2 Self-Assessment and adherence to Covered Defense Information protocols. A separate line item denotes the First Article Test requirement with a nominal price of $1.00, but no separate charge is assumed if not cited, and waiver of the FAT results in no award for this line. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with strict quantity variance limits of plus or minus 0%.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-Q-0421
The contract pertains to the procurement of 39 units of an ADAPTER, HOISTING with NSN/Part Number 3940-01-127-7500 under solicitation SPE8EE-26-Q-0421, which is a total small business set-aside under FAR 19.5. The delivery is required within 90 days after contract award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning unauthorized disclosure to foreign persons—regardless of location—is prohibited. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export control training and the DLA questionnaire, and approved by DLA, may access the controlled technical data. The solicitation is managed by the Department of Defense under the organization Construction & Equipment Manufacture & Con, with Ceasal Clyburn as the primary point of contact. Solicitation responses are due by August 15, 2026, and the posting date is August 5, 2026. Additionally, the contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization to meet cybersecurity requirements, and the contract falls under the scope of Covered Defense Information.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-Q-0423
The contract pertains to the procurement of 13 units of an Adapter, Hoisting with NSN 3940-01-127-7500 under solicitation SPE8EE-26-Q-0423, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 90 days of award, with responses due by August 15, 2026. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. firms or subsidiaries. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling and safeguarding of this controlled information. Additionally, the contractor must be certified under CMMC Level 2 by a certified third-party assessment organization to meet cybersecurity requirements for handling covered defense information. The point of contact for this solicitation is Ceasal Clyburn, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Hazard Communication and Safety Compliance SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and Federal Standard No. 313, with all deliverables due prior to contract award. This effort is part of a subcontract under the Department of Defense’s Fluid Handling Division, focused on ensuring regulatory compliance for chemical safety documentation. The work must be completed and submitted by the response deadline of August 17, 2026, and the performance location is specified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The NAICS code 541690 indicates this is a professional, scientific, and technical services contract, specifically under other scientific and technical consulting services, suggesting the contractor must possess expertise in regulatory safety compliance and documentation standards.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, marking, and palletization services for a propeller parts kit, strictly adhering to MIL-STD-2073-1E for military packaging and preservation, MIL-STD-129 for labeling and marking of military shipments, and DLA RP001 for defense logistics agency procurement standards. All work must meet exacting military specifications to ensure the integrity, traceability, and readiness of components during storage and transit. The services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and are classified as a subcontract under NAICS code 493190, which pertains to other warehousing and storage activities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Fluid Handling Division within the Department of Defense.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 336214
New
DIBBS
Marine Propeller Parts Kit SupplyThe contract requires the supply of six units of a marine propeller parts kit identified by NSN 2010-01-701-6865 and part number 8M0150151, encompassing all aspects of manufacturing or sourcing the components, proper packaging, labeling, and final delivery to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The work must fully comply with military specifications and standards for defense logistics, with the contractor responsible for ensuring quality, traceability, and timely completion to meet the agency’s operational needs. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is classified as a subcontract under the NAICS code 336214 for Ship and Boat Building and Repair. The contracting activity falls under the Fluid Handling Division of the Department of Defense, and all deliverables must be positioned for direct receipt at the designated DLA New Cumberland location. While no set-aside provisions or specific point of contact are detailed, the requirement is open to qualified subcontractors capable of meeting the technical and logistical demands of supplying critical marine propulsion system components to a federal supply chain.
Travel Trailer and Camper Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
New
DIBBS
Unable to decompose prime contract due to system unavailability

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Transportation and FOB Destination Delivery
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication Compliance
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Porthole Cover (NSN: 2040-17-121-5355)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Covered Contractor Information System SafeguardingThis contract requires the implementation of all NIST Special Publication 800-171 security controls to safeguard covered defense information processed, stored, or transmitted on contractor information systems. The contractor must self-attest to compliance with these controls through the Supplier Performance Risk System and maintain ongoing adherence to the specified cybersecurity requirements. Additionally, the contractor is obligated to report any cyber incidents affecting covered defense information in accordance with DFARS clause 252.204-7012, ensuring timely notification and documentation of security breaches or compromised data. The work is scoped as a subcontract under the Department of Defense, specifically managed by the Fluid Handling Division, with performance expected at JBER, Alaska, 99506-2959. The solicitation is open for responses until August 17, 2026, and the NAICS code 541512 indicates this effort relates to computer systems design services, emphasizing the technical nature of the cybersecurity implementation tasks.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires comprehensive management of hazardous materials used in production and packaging, with a focus on identifying all such materials and ensuring full compliance with OSHA and federal standards for Safety Data Sheets (SDS). This includes preparing, maintaining, and promptly updating SDS documentation to reflect current chemical hazards, formulations, and safety procedures. The contractor must also ensure that all product labeling adheres to regulatory requirements, including accurate hazard communication, pictograms, signal words, and precautionary statements to protect workers and meet legal obligations. Performance is centered at JBER, Alaska, with a strict deadline for response by August 17, 2026. The work falls under NAICS code 541620, indicating it is a professional, scientific, and technical service related to environmental consulting and safety compliance. The subcontract is issued by the Fluid Handling Division under the Department of Defense and is intended to support defense-related operations requiring strict adherence to hazardous material handling protocols. The contractor must be qualified to deliver ongoing compliance services, respond to regulatory changes, and maintain documentation that remains accurate and accessible for audits and inspections.
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging, preservation, and marking services for tube fitting caps in strict compliance with MIL-STD-2073-1E and DLA RP001 standards. This includes a full sequence of operations such as cleaning, drying, wrapping, and palletizing each component to ensure protection against corrosion, contamination, and physical damage during storage and transit. All processes must meet the rigorous environmental and handling requirements mandated by Department of Defense specifications for long-term readiness and deployment. The work must be performed at the designated place of performance in JBER, Alaska, with the final delivery of packaged units subject to federal contracting protocols. This is a subcontract opportunity under NAICS code 561910 for specialty services in support of defense logistics, issued by the Fluid Handling Division of the Department of Defense. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026. Contractors must demonstrate proven experience in military packaging systems, adherence to federal preservation standards, and the ability to maintain quality control throughout the entire workflow. No set-aside designation is specified, and the contract will be awarded based on technical compliance, cost efficiency, and demonstrated capacity to deliver on time to the specified location.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Precision Manufacturing of Flareless Tube Fitting CapThe contract calls for the precision manufacture of a pressure seal flareless tube fitting cap with the National Stock Number 4730011864740, fully compliant with applicable military specifications. Production must be conducted from raw material procurement through to final inspection and packaged readiness, ensuring all components meet rigorous defense-grade quality and performance standards. The work is scoped as a subcontract under the NAICS code 332994, indicating specialized manufacturing in other fabricated metal product industries, and is tied to a Department of Defense initiative led by the Fluid Handling Division. The contract was posted on August 5, 2026, with a response deadline of August 17, 2026, and requires delivery to a place of performance in Joint Base Elmendorf-Richardson, Alaska, identified by zip code 99506-2959. Although the solicitation number and point of contact are not provided, the contract is accessible through the DIBBS system via the provided UI link. The effort does not involve a set-aside designation, meaning all eligible vendors may compete, and the focus is on technical compliance, end-to-end production capability, and timely fulfillment to support defense fluid handling systems.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: NA
New
DIBBS
Unable to Decompose Subcontract Opportunities

POSTED

2 days ago

DEADLINE

in 10 days
View Details