Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Advanced Composite Materials Development

Active

Federal

Response Deadline09/20/2027, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract focuses on the research, design, and development of advanced composite materials specifically engineered for aerospace structures. The materials under development include polymer matrix composites and ceramic matrix composites, with an emphasis on achieving superior strength-to-weight ratios, enhanced thermal stability, and improved durability. The objective is to create high-performance materials that can meet demanding aerospace requirements, contributing to overall structural efficiency and longevity. Issued by the Department of Defense through the United States Air Force Material Command’s Air Force Research Laboratory (AFRL) located at Wright Patterson Air Force Base, this subcontract is categorized under NAICS code 325998. The solicitation was posted in April 2026, with responses due by September 2027. The contract’s place of performance is Wright Patterson AFB, Ohio (ZIP code 45433), highlighting its alignment with cutting-edge aerospace research and development initiatives.

General Info

Research and develop advanced aerospace composite materials with superior strength, thermal stability, and durability.

Agency

Department Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation Manufacturing

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8650-18-S-5010.

The full solicitation package (12 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MR&D

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 22

subcontract

Response DeadlineSep 20

Submission deadline

Response Deadline

09/20/2027, 08:00:00 PM UTCin 11 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Research, design, and development of high-performance composite materials for aerospace structures, including polymer matrix and ceramic matrix composites, with focus on strength-to-weight ratio, thermal stability, and durability.

Similar Contracts

Same NAICS industry code

Cooling Tower Chemical SupplierThis subcontract for a Cooling Tower Chemical Supplier involves the provision of biocides, corrosion inhibitors, and water treatment chemicals for prime contractors working on County of Orange Sheriff-Coroner facility projects. The selected supplier is responsible for delivering chemicals to the James A. Musick and Theo Lacy facilities, ensuring all products align with manufacturer specifications or the Water Management Plan. All supplied chemicals must be merchantable and strictly compliant with EPA guidelines for industrial water treatment. The contract includes the delivery of these supplies directly to the designated sites. The solicitation was posted on October 16, 2026, with a response deadline of December 16, 2026.

Sheriff-Coroner

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Liquid Absorbent Pouch SupplierThis subcontract involves the manufacture and supply of break-open liquid absorbent pouches designed for biohazardous fluid spillage, specifically meeting NSN 6530-01-307-7434 specifications. The supplier will support prime contractors on projects for the Department of Defense Medical Supply Chain. Each delivery consists of one package containing 1,000 individual pouches, with strict adherence to ASTM D3951 packaging standards and Medical Marking Standard No. 1. The contract requires full compliance with the Buy American Act and DLA RP001 packaging requirements. Performance for this agreement is based in Silverdale, Washington, under NAICS code 325998. Interested parties must have responded by the deadline of October 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Specialized Sensor MaterialsThis subcontract, titled Supply of Specialized Sensor Materials, involves the provision of radioactive or hazardous raw materials to prime contractors supporting DLA Weapons Support ASC projects. The selected supplier must ensure all materials comply with FAR 52.223-7 and provide Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. Additionally, the contractor is required to hold all necessary licenses for the handling and transport of radioactive materials and must adhere to MIL-STD-129 marking requirements. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the performance of this contract will take place in New Cumberland. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The scope of work focuses on the delivery of certified raw materials and corresponding safety documentation to meet strict federal and military standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Hazardous Material Absorbent Pads (NSN 4235016298736)This subcontract opportunity through the Department of Defense DLA Weapons Support ASC Commodities Division involves the supply of bulk hazardous material absorbent pads. The required products must meet NSN 4235016298736 and adhere to the DLA Master List of Technical and Quality Requirements RA001. Additionally, the supplier must provide Safety Data Sheets compliant with 29 CFR 1910.1200(g) and Federal Standard No. 313, while ensuring all materials are Buy American Act compliant. The contract is designated as a Total Small Business Set-Aside under NAICS code 325998, with performance taking place in New Cumberland. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Disposable Chemical Heating PadsThis subcontract involves the production of disposable chemical heating pads for prime contractors supporting DLA medical supply contracts. The scope of work includes the chemical formulation and encapsulation required for exothermic heating to create 9 by 7 inch pads, which must be delivered finished, labeled, and packaged in sealed units of 16 under NSN 6530-01-653-4261. The manufacturer must maintain FDA Registration as a Class I device manufacturer in accordance with FDA Regulation 890.5710. Additionally, the provider is required to strictly adhere to the Buy American Act and the Berry Amendment. This requirement is managed under the Department of Defense Medical Supply Chain FSH with a place of performance located at APO 09227.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Mercury Compound Supply (NAVSEA Compliant)This subcontract involves the supply of mercury compounds to prime contractors supporting DLA Troop Support Construction and Equipment projects for the Department of Defense. The selected provider must deliver certified chemical compounds that strictly adhere to the purity and safety specifications outlined in NAVSEA 5100-003D. Due to the nature of the materials, the contractor is required to utilize hazardous material containment packaging for all transport and must possess valid HAZMAT shipping certification. This requirement ensures full compliance with safety standards throughout the delivery process for all certified mercury compound materials.

POSTED

DEADLINE

Silver Soldering Flux Paste SupplierThis subcontract involves the supply of silver soldering flux paste to prime contractors supporting the Defense Logistics Agency for the USS BATAAN LHD 5. The supplier is responsible for providing six 8-ounce units that conform to ASTM B32 standards, ensuring the material contains no intentionally added mercury and maintains a minimum shelf life of 85 percent upon receipt. The agreement requires strict adherence to the Buy American Act and the Berry Amendment, with the delivery of Safety Data Sheets included. The items are to be delivered FOB Destination to a performance location in FPO 09554. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Gasket Forming Compound SupplierThis subcontract involves the supply of one tube of NSN 8030-01-517-1616 COTS gasket forming compound to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The material must be delivered FOB Destination to Fort Carson, Colorado. The supplier is required to maintain temperature-controlled storage between 46 and 70 degrees Fahrenheit and ensure full compliance with OSHA Hazard Communication standards, including the submission of SDS and OSHA labels for approval. Additionally, all packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E specifications.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of QPL-Qualified Electrical Insulation Tape (NSN 5970005839528)This subcontract involves the supply of high-specification electrical insulation tape for prime contractors working on DLA Weapons Support ASC projects. The required product is opaque tape measuring 1.5 inches wide and 0.010 inches thick in 108 foot rolls, which must be manufactured or sourced in accordance with MIL-I-19166C and QPL standards. The tape must utilize silicone adhesive and mercury-free materials to meet strict technical requirements. The contractor is responsible for delivering 10 rolls of inspected tape that comply with Packing Level B. All items must feature markings per MIL-STD-129 and adhere to quality assurance protocols defined by MIL-STD-1916 and ASQ H1331. This procurement is managed by the Department of Defense under NAICS code 325998 for NSN 5970005839528.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supplier of Red ACS Litmus PaperThis subcontract involves the supply of ACS Grade red litmus paper strips to support prime contractors on DLA Troop Support Medical Supply Chain projects. The provided materials must strictly conform to NSN 6640-00-290-0147 and all applicable DLA Master List technical requirements. Packaging must adhere to Medical Marking Standard No. 1, with the product delivered in vials containing 100 strips each. The contract is managed by the Department of Defense under the Medical Supply Chain FSH. All completed vials are to be delivered FOB Destination to Redstone Arsenal, Alabama. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026, falling under NAICS code 325998.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0237

Solicitation SPE8E5-27-T-0237 is a federal procurement issued by the Defense Logistics Agency for the supply of 28 decals, identified by NSN 7690015408830. The items are subject to a non-extendable 24-month shelf life under requirement RS016 and must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The original required delivery date is April 7, 2027, with a need ship date of April 12, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special Marking Code 32 is required for shelf-life identification. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory. All quotes must be submitted via the DLA Internet Bid Board System, and payment will be processed electronically through the Wide Area Workflow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PAD, ABSORBENT, HAZARDOU

Solicitation # SPE4A6-27-T-4562

Solicitation SPE4A6-27-T-4562 is a fixed-price, total small business set-aside procurement issued by the Defense Logistics Agency for 665 kits of hazardous material absorbent pads, identified by NSN 4235016298736. The items are classified as commercial off-the-shelf products and must be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The required delivery date is March 2, 2027, with a need ship date of April 13, 2027, and a delivery window of 171 days after order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129 for labeling and barcoding, ASTM-D-3951 for packaging, and MIL-STD-2073-1 Appendix D for kit assembly. Each kit must be contained in a single cushioned box with a detailed contents list of NSNs and part numbers. Because the items are hazardous materials, the contractor must provide Safety Data Sheets meeting 29 CFR 1910.1200(g) and Federal Standard No. 313. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the Buy American Act.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8650 USAF Afmc Afrl Pzl Afrl/pzl

Same awarding agency

Vehicle Recompete: ADMIRE — IDIQ ADMIREThe Airman Decision Making Interface and Research (ADMIRE) is an Indefinite Delivery, Indefinite Quantity (IDIQ) contract managed by the Department of Defense with a total ceiling value of 79,640,417.50 dollars. This vehicle focuses on research and development for operator interfaces and aerospace physiology, with the current ordering period set to expire on February 22, 2028. The contract is classified as a full recompete and did not utilize a specific set-aside. Four primary companies hold orders under this vehicle, with DCS Corporation, BAE Systems Space and Mission Systems Inc., and Ball Aerospace and Technologies Corp. managing the workload. Significant task orders include the Responsive Operator-Interface Development and the Intelligent Collaborative and Adaptive Trusted Transparent Teaming Interfaces. DCS Corporation has secured the highest volume of orders, while BAE Systems holds the single highest-value task order.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 2 months ago

DEADLINE

AFRL Enterprise CSO: Centralized Open Spiral

Solicitation # FA865226SC005

Solicitation FA865226SC005 is a Centralized, Open Two-Step Spiral issued by the Air Force Research Laboratory under the Defense Commercial Solutions Opening (CSO) framework in accordance with R-DFARS 212.70. The government is seeking Commercial Solutions Brief (CSB) submissions for innovative solutions ranging from advanced component development to operational systems development, specifically limited to Foundational Technologies (AFRL/RE). This procurement follows a two-step process where only CSB submissions are currently requested; offerors must be categorized as Selectable during the Step One evaluation to be invited to Step Two, which involves the submission of a Commercial Solutions Proposal (CSP). The deadline for Step One CSB submissions is 5:00 PM Eastern on April 30, 2027. Submissions must align with the Areas of Interest identified in Attachment 1 of the AFRL Enterprise CSO and follow the formatting instructions in Section 7 and Attachment 2 of the main announcement. While there is no limit on the number of CSBs a single offeror may submit, each must present a unique approach. Submissions should be emailed to afrl.cso.mailbox@us.af.mil, though those containing Controlled Unclassified Information must be transmitted via the DoD SAFE system. This spiral was noted as cancelled effective June 4, 2026, with future spirals transitioning to a decentralized model issued by respective Mission Organizations.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Precision Hardware Fabrication and Component SupplyThis subcontract for Precision Hardware Fabrication and Component Supply supports the AFRL Materials and Manufacturing Directorate by providing the supply and fabrication of physical components and prototypes for prime contractors. The scope of work involves manufacturing components according to specific R&D requirements, procuring specialized equipment, and performing precision machining. All deliverables must adhere to DFARS 252.211-7003 standards for Item Unique Identification marking. The contractor is responsible for delivering physical hardware and components along with comprehensive Operations, Maintenance, Installation, and Training data. Managed by the Department of Defense under agency FA8650, the project falls under NAICS code 332999. The contract period extends from the posting date of May 28, 2026, with a response deadline of February 19, 2028.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Additive Manufacturing Design and PrototypingThis subcontract, titled Additive Manufacturing Design and Prototyping, focuses on the development and implementation of additive manufacturing technologies for prime contractors supporting AFRL Materials and Manufacturing Directorate projects. The primary objective is to utilize industrial metal and polymer 3D printing equipment and specialized design software to bypass long-lead production times while adhering to airworthiness community standards. The contractor is responsible for delivering additive manufacturing prototypes, technical reports, and Form, Fit, and Function data. This effort is managed by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl, with a NAICS code of 332710. The opportunity was posted on May 28, 2026, with a response deadline of February 19, 2028.

POSTED

DEADLINE

Advanced Alloys and Materials ResearchThe Advanced Alloys and Materials Research subcontract, issued by the Department of Defense under the USAF AFMC AFRL, focuses on the research and development of conventional and advanced alloys for prime contractors. The project aims to modernize production processes to enhance speed and reduce costs, requiring specialized expertise in metallurgy and material science. The contractor is responsible for delivering material characterization data and scientific and technical reports as specified by CDRL A001. This opportunity falls under NAICS code 541715, with a response deadline of February 19, 2028.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Technical Documentation and CDRL ManagementThis subcontract, titled Technical Documentation and CDRL Management, supports the AFRL Materials and Manufacturing Directorate by providing formal documentation and delivery of scientific and technical data for prime contractors. The scope of work involves formatting reports according to ANSI/NISO guides and managing DD Form 1423-1 Contract Data Requirements List submissions. Success in this role requires specialized expertise in technical writing and adherence to SF 298 standards to ensure the delivery of final scientific and technical reports. The opportunity is issued by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl and is categorized under NAICS code 541611. It was posted on May 28, 2026, with a response deadline of February 19, 2028.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Manufacturing Optimization & Digital Twin SoftwareThis subcontract opportunity with the Department of Defense, specifically for the USAF AFMC AFRL, focuses on the development of computer software to support digitalized conventional production and schedule optimization for prime contractors within the AFRL Materials and Manufacturing Directorate. The project requires specialized expertise in software engineering and digital manufacturing integration to create platform-agnostic manufacturing tools and digital twins. The selected provider will be responsible for delivering comprehensive computer software, including all relevant source code and technical documentation. This effort falls under NAICS code 541511 and has a response deadline of February 19, 2028.

Custom Computer Programming Services

POSTED

DEADLINE

Solicitation # FA2394-26-R-B003

Endless Forge is a Manufacturing as a Service initiative led by the Air Force Research Laboratory Materials and Manufacturing Directorate to establish an adaptive, scalable, and resilient production network for the US industrial base. The program aims to shift from sequential value chains to regionalized production networks, enabling the Department of the Air Force to rapidly scale weapon systems based on battlefield performance. With a total estimated program cost of 149 million dollars and multiple awards anticipated, the solicitation focuses on two primary Areas of Interest: technology sprints to reduce risk in enabling technologies like digital certification and software-defined manufacturing, and a technology demonstration to validate the concept across domains such as space systems and autonomous platforms. This unrestricted solicitation, number FA2394-26-R-B003, utilizes a two-step process requiring a five-page white paper followed by a full proposal for selected offerors, with a response deadline of February 19, 2028. Anticipated contracts include Other Transaction for Prototype and Cost Plus Fixed Fee types, with a technical performance period of 33 months. Key requirements include strict adherence to security risk reviews for key personnel to mitigate foreign influence, compliance with NIST SP 800-171 and CMMC cybersecurity standards, and the use of the Wide Area Workflow system for invoicing. Deliverables encompass research and development data, scientific and technical reports, and hardware prototypes that must meet MIL-STD-130 unique item identification and MIL-STD-129 packaging standards.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Materials Data Analytics and ModelingThis contract focuses on computational modeling, simulation, and data analytics aimed at predicting material behavior and accelerating material discovery processes. It also supports the development of digital twins for structural systems, enhancing the ability to replicate and analyze the performance of real-world structures virtually. The work is intended to provide advanced tools and insights in materials science that can improve the design, testing, and maintenance of structural systems. Issued by the Department of Defense, specifically the Air Force Research Laboratory at Wright Patterson Air Force Base, this subcontract falls under the NAICS code 541721, which pertains to research and development in physical, engineering, and life sciences. The contract was posted in April 2026 with a response deadline set for September 2027, allowing interested parties ample time to prepare their proposals. The work location is designated at Wright Patterson AFB, Ohio, emphasizing its strategic importance for military and defense-related material innovation and technology development.

POSTED

DEADLINE

Additive Manufacturing (3D Printing) for Structural ComponentsThe contract focuses on researching and applying additive manufacturing techniques to create complex, lightweight structural components using metals, polymers, or composite materials specifically for aerospace applications. It aims to advance the production capabilities of these materials through 3D printing technology to meet the stringent requirements of aerospace structural components. The work will be performed primarily at Wright Patterson Air Force Base under the Department of Defense's Air Force Research Laboratory, indicating a strong emphasis on defense and aviation sector innovation. This subcontract opportunity falls under the NAICS code 332999, which relates to manufacturing activities associated with metal products not elsewhere classified. The contract was posted on April 22, 2026, with a response deadline set for September 20, 2027, allowing over a year for submissions. While details such as specific set-aside designations or organizational type preferences are not specified, the contract is issued by the USAF's AFRL materials and manufacturing division, highlighting the government’s ongoing commitment to developing advanced manufacturing processes to enhance aerospace structural performance and reduce component weight.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Structural Health Monitoring (SHM) Sensor IntegrationThe contract focuses on the design and integration of embedded sensors and diagnostic systems tailored for real-time monitoring of structural integrity in aircraft and spacecraft components. This involves the development of advanced Structural Health Monitoring (SHM) capabilities to enhance the safety, reliability, and maintenance efficiency of critical aerospace structures. The work will be performed as a subcontract under the Department of Defense, specifically managed by the USAF Air Force Research Laboratory located at Wright Patterson Air Force Base. Key details include its classification under NAICS code 334511, which pertains to designing and manufacturing electronic components. The solicitation was posted in April 2026, with a response deadline set for September 2027, indicating an extended period for comprehensive proposal development. The initiative aligns with military and aerospace objectives by integrating cutting-edge sensor technology for proactive damage detection and diagnostic analysis, ensuring that both aircraft and spacecraft maintain optimal performance standards over their operational lifespan.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Metallic Alloys and High-Temperature Materials ResearchThis contract focuses on the research and development of advanced metallic alloys, specifically titanium and nickel-based superalloys, designed to withstand the high-temperature environments encountered in aerospace applications such as turbine engines and hypersonic vehicles. The work involves creating materials that enhance performance, durability, and heat resistance, which are critical for the next generation of aerospace technologies. The research is expected to contribute significantly to improving propulsion systems and enabling greater operational capabilities for military and aerospace platforms. Issued by the Department of Defense under the USAF Afmc Afrl Pzl Afrl/pzl agency, the subcontract is associated with NAICS code 331492, relating to iron and steel foundries. The project will be carried out primarily at Wright Patterson Air Force Base in Ohio. The contract solicitation was posted in April 2026, with a response deadline set for September 20, 2027. This effort is integral to advancing materials science within defense aerospace sectors, providing crucial support to maintaining technological superiority in high-performance aircraft and hypersonic systems.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS