Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Seat Component Supply (Commercial Off-The-Shelf)

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of ten commercial off-the-shelf aircraft seat armrests identified by part number 1A458-0586AP and NSN 1680992175711, with delivery terms set at FOB origin, meaning the buyer assumes responsibility for the goods once they leave the supplier’s location. The item is classified under NAICS code 336411, indicating it falls within the aerospace product and parts manufacturing sector, and is specifically designated as a total small business set-aside under FAR 19.5, ensuring only small business concerns are eligible to bid. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of August 17, 2026, and the place of performance is tied to Tinker Air Force Base with a zip code of 73145-8000, pointing to the eventual operational or logistical destination for the components. This is structured as a subcontract under the broader defense supply chain, focusing on pre-manufactured, non-customized parts essential for commercial aircraft seating systems.

General Info

Ten armrests supplied FOB origin, small business set-aside, deadline August 17, 2026, for Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 10 units of a commercial aircraft armrest (P/N 1A458-0586AP, NSN 1680992175711), a pre-manufactured component delivered FOB origin.

Similar Contracts

Same NAICS industry code

Commercial Off-the-Shelf (COTS) Component Supply – Pressure BellowsThe contract encompasses the supply of a commercial off-the-shelf pressure bellows identified by NSN 1660007834066, required to meet stringent military specifications for performance, packaging, marking, and hazardous materials handling. The component is intended for delivery to DLA Distribution Cherry Point, North Carolina, with strict adherence to all applicable defense logistics standards. The item falls under NAICS code 336411, indicating its classification within the aircraft and parts manufacturing sector, and is being procured under a subcontract arrangement through the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. All deliverables must comply with federal regulations governing military-grade components, including proper labeling, containment, and documentation for hazardous materials if applicable. Responses must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 9, 2026. The place of performance is specifically designated as Cherry Point, NC, with a zip code of 28533-5040, and while the full office address is not provided, the delivery location is clearly defined. There is no set-aside designation specified, meaning the opportunity is open to all qualified vendors without preference. Bidders are expected to ensure full compliance with military standards for the pressure bellows, including certification of conformance and traceability of materials, as the component supports critical defense systems. Technical and logistical accuracy is paramount, and failure to meet specifications may result in rejection or non-payment. All communication and submission must align with the DIBBS portal linked in the contract notice.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aircraft Access Door ManufacturingThe contract requires the manufacture of aircraft access doors in specific configurations as defined by technical drawings and Defense Logistics Agency requirements, encompassing all phases from fabrication and assembly to testing and packaging. The work must adhere to rigorous standards to ensure compliance with military specifications and operational readiness. This is a subcontract under a Women-Owned Small Business Set-Aside, designated under NAICS code 336411, which restricts eligibility to qualified women-owned small businesses. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and the place of performance is designated as Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though no point of contact details are provided. All work must be completed in accordance with DLA directives and delivered to meet the outlined technical and logistical requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-168F

The contract solicitation identifies a requirement for 434 units of a gasket, identified by NSN 5330-01-073-0036, to be delivered within 165 days of award. The item must comply with stringent technical and quality standards, including MIL-STD-130N for identification marking of U.S. military property and must be packaged in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gasket must have 31 months of shelf life remaining upon delivery to the government depot, and all items must be free of asbestos with any alternatives requiring approval under Clause L30 and Provision 4 conditions. The contract incorporates cybersecurity requirements under the CMMC Level 2 framework for third-party assessment organizations and references technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The solicitation, issued under contract number SPE7L3-26-T-168F on August 9, 2026, with a response deadline of August 20, 2026, is classified under NAICS code 336411 and falls under the Department of Defense’s Land Supplier Ops Vehicle Support organization. The place of performance is Tracy, California, with a ZIP code of 95304-5000, and the primary point of contact is Susan Diamond at the DLA email and phone provided. The contract emphasizes compliance with federal packaging specifications, shelf-life preservation, and environmental safety standards while mandating adherence to DLA’s overarching technical and quality requirements for procurement, as outlined in the referenced master lists and standards.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

ROLLER RETAINER, GEA

Solicitation # SPE4A7-26-T-634K

The contract is for the procurement of 23 units of a Roller Retainer, GEA, identified by NSN 1615-01-090-5922, under solicitation SPE4A7-26-T-634K. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on the acquisition size. The technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons regardless of location, and mandates prior authorization from the Department of State or Commerce. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Packaging must adhere to DLA specifications, inspections are to occur at origin, and government identification must be removed from rejected items. The delivery requirement is 82 days after award, with performance located in New Cumberland, Pennsylvania, under the Department of Defense’s ASC Supplier Oper AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

STIFFENER, AIRCRAFT

Solicitation # SPE4A7-26-T-634T

The contract is for four aircraft stiffeners with NSN 1560-01-467-5640, solicited under SPE4A7-26-T-634T with a response deadline of August 17, 2026, and a delivery requirement of 646 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless revised by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. The place of performance is Robins AFB, Georgia, and the contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division with primary point of contact April Reed.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-169V

The contract specifies the procurement of 72 gaskets identified by NSN 5330-00-834-3384 under solicitation SPE7L3-26-T-169V, with a delivery deadline 138 days after award. All items must be free of asbestos, and any alternative materials require formal approval per Clause L30 and Provision 4 conditions. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet degradation. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must also comply with MIL-STD-130N for identification marking of U.S. military property, and Covered Defense Information provisions may apply. The contract is managed by the Department of Defense under Land Supplier Ops Vehicle Support, with performance located in Cherry Point, North Carolina, and primary point of contact Susan Diamond at DLA.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

BELLOWS, PRESSURE

Solicitation # SPE4A7-26-T-632N

This contract is for the procurement of one pressure bellows, part number 25614037, with NATO Stock Number 1660007834066, intended for critical application under the procurement reference SPE4A7-26-T-632N. The item must be manufactured by approved sources including Northrop Grumman Systems Corporation, Meggitt North Hollywood Inc, and Hamilton Sundstrand Corporation. Delivery is required FOB origin within 381 days from the contract award, with no variance allowed in quantity, and inspection and acceptance both occur at the manufacturer’s origin. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization follows DLA packaging guidelines, and the final delivery address is DLA Distribution Cherry Point in North Carolina. The contract mandates compliance with a suite of technical, quality, and cybersecurity requirements referenced through R and I numbers from the DLA Master List, including CMMC Level 2 self-assessment, configuration change management, and tailored higher-level quality requirements. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with critical attributes requiring zero non-conformances. Unit of issue is each, and the contract includes mandatory reporting, inspection, and documentation provisions under RQ001, RQ009, RQ011, RQ017, and RT001. Item Unique Identification is not required per the service customer’s directive, consistent with DFARS 252.211-7003(c)(1)(i). The solicitation was issued August 9, 2026, with responses due by August 17, 2026, and the NAICS code is 336411 for aircraft and parts manufacturing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Repair of NIIN 011589678; NOMEN: BLADE,ROTARY RUDDER

Solicitation # N0038326QF166

The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source repair contract to Sikorsky for six rotary rudder blades, part number 70101-31000-046, with NSN 7R1615011589678, under NAICS code 336411 and FSC 1615. No technical drawings or data are available to the government, and it does not hold the rights to the intellectual property necessary to source this component from any other supplier. The acquisition is justified under 10 U.S.C. 3204(a)(1) and FAR 6.302, as Sikorsky is the only responsible source capable of performing the repair, and no alternative supplies or services meet the agency’s operational needs. Any firm not previously approved to manufacture this item must submit a Source Approval Request, but the repair schedule will not be extended to accommodate approval processing. The government intends to use FAR Part 15 procedures, not the commercial item acquisition policies under FAR Part 12, based on market research findings. While the notice is not a formal request for proposals, all responses submitted within 45 days of the synopsis date will be evaluated solely to confirm the necessity of sole-source procurement. The procurement is not set aside for small businesses, will be conducted electronically via NECO, and no phone requests or hard-copy submissions will be accepted. Interested parties must submit capability statements via email to the designated point of contact, Anna Kiessling.

Navsup Weapon Systems Support

POSTED

DEADLINE

Unmanned Aerial System (UAS) with Aerial Ignition Capabilities UAS

Solicitation # W911S226U3993

The solicitation seeks a commercial-off-the-shelf unmanned aerial system branded as Alta X+ IGNIS, specifically engineered for aerial ignition operations in forestry and land management applications. The system must be fully compliant with NDAA and TAA regulations and must be listed on the Defense Innovation Unit’s Blue UAS Cleared List, a mandatory requirement for procurement consideration. It must deliver a minimum of 55 minutes of flight time without payload, maintain at least 10 minutes with a 35-pound load, and sustain 22 to 30 minutes while actively deploying ignition spheres. The UAS must operate reliably in extreme environmental conditions including temperatures from 40 to 105 degrees Fahrenheit, winds up to 15 meters per second, and humidity levels up to 90 percent non-condensing. The payload system must accurately deliver ignition spheres with built-in safety mechanisms, including a remote emergency jettison function, geo-fencing to restrict ignition to approved zones, and onboard sensors to monitor for obstructions or thermal anomalies. The aircraft must be equipped with a radiometric thermal camera with 640x512 pixel resolution at 30Hz and a Full HD optical camera with 10x optical zoom, supporting mission-critical monitoring and situational awareness. Navigation relies on centimeter-level GPS accuracy, with full autonomy through pre-programmed waypoints and manual control, all data transmitted over encrypted 2.4GHz frequencies. Mission planning software must accept standard geographic formats like KMZ and PDF. The deliverable package includes the UAS, ignition payload, ground control station, thermal and optical sensors, four flight batteries, dual chargers, battery transport cases, spare propellers, and a complete spare parts kit. The vendor must provide three days of training for up to five personnel, detailed maintenance documentation, and an annual care plan offering calibration, software updates, discounted repairs, and dedicated technical support. The contract is a Small Business Set Aside, managed by the Department of Defense at Fort Drum, with responses due by August 13, 2026.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Unmanned Carrier-Based Aircraft Solutions Request for Information (RFI)

Solicitation # PAEA-UnmannedStratSS

The Naval Air Systems Command is seeking industry input through a Sources Sought notice for next-generation unmanned carrier-based aircraft to support the Naval Aviation Enterprise’s Air Wing of the Future strategy, aligned with the Golden Fleet initiative. The focus is on identifying capable industrial partners who can design, develop, prototype, manufacture, and field autonomous platforms optimized for deployment from Ford-class and Nimitz-class nuclear aircraft carriers. The desired solutions may include single-role, multi-role, or modular systems that integrate with existing Family of Systems such as the MQ-25A and Collaborative Combat Aircraft, with an emphasis on operational effectiveness, autonomy, and carrier compatibility. The government aims to use the information gathered to shape future requirements, investment priorities, and acquisition pathways for unmanned aviation capabilities. Responses must be submitted electronically by 5:00 PM EST on August 13, 2026, to the designated Navy mailbox with a copy to Contract Specialist Samantha Moore. Submissions are limited to ten pages using Times New Roman 12-point font and single spacing, with optional accompanying PowerPoint presentations not exceeding twenty slides and no video content. All information must remain unclassified. The solicitation, identified as PAEA-UnmannedStratSS, was posted on July 14, 2026, and is issued under NAICS code 336411. No set-aside provisions apply, and responses are welcome from all qualified industry entities. Point of contact for inquiries includes Samantha Moore and Jacob Leighton, with the office located at Naval Air Station Patuxent River, Maryland.

Naval Air Systems Command

POSTED

DEADLINE

Solicitation # FA282326Q0062

This solicitation, identified as FA2823-26-Q-0062, is a competitive Request for Quote for Drone Targets under FAR Part 12 as a total small business set-aside, utilizing the Revolutionary FAR Overhaul (RFO) deviations for Parts 12, 19, and 25. The requirement, issued by the Air Force Test Center at Eglin AFB, Florida, seeks 10 drone targets, 2 ground control stations, 2 paired hand controllers, 1 launch interface, and two days of flight training conducted at the contractor’s facility, all aligned with the Technical Requirement Document dated 06 July 2026. The ground control station software must be Mission Planner©, with a formal brand name justification in place. The NAICS code 336411 applies with a size standard of 1,500 employees, and only small business concerns currently registered and designated as such in SAM.gov are eligible to respond; submissions from non-eligible firms will be rejected as non-responsive. All offers must be submitted in U.S. dollars and English, with pricing and warranty terms clearly stated, and delivery timelines specified. FOB Destination shipping is required, with a 45-calendar-day delivery period from award, and all items must be delivered to 15312 Blake Street, Eglin AFB Aux Field 3/Duke Field, FL 32542, or the designated DoDAAC F1TOCY location. Each item must comply with MIL-STD-130 and MIL-STD-129 for Unique Item Identification and packaging, using two-dimensional data matrix symbology and verified as machine-readable with tools compliant with Appendix A of MIL-STD-130. Offers must conform to DFARS 252.211-7003 and DFARS 252.204-7017, addressing item uniqueness and prohibitions on covered telecommunications equipment. Technical acceptability is assessed as a pass/fail criterion based on conformity to the technical document and an active SPRS status—vendors must hold a Blue, Purple, Green, White, Black, or Green (Scorable Data Pending) rating to pass. Evaluation and award is strictly based on the lowest priced technically acceptable offer, following a Lowest Price Technically Acceptable (LPTA) process under FAR 12.203(b). Payment will be processed exclusively via Wide

FA2823 Aftc Pzio

POSTED

DEADLINE

Uncrewed Aircraft System - Light

Solicitation # W8703-270009/A

The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3

Department of National Defence

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Cybersecurity and CMMC Compliance Support

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

Quality Inspection and Acceptance Testing

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling

Other Scientific and Technical Consulting Services

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Bushing Supply and Delivery

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Export Control & ITAR/EAR Compliance SupportThe contract requires comprehensive advisory and operational support to ensure compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). This includes managing export licensing processes, implementing and monitoring controls for foreign person access to controlled technologies and information, and delivering structured training programs to personnel on export control requirements. The scope centers on maintaining strict adherence to U.S. export laws within a defense-related environment, with an emphasis on preventing unauthorized transfers and ensuring organizational awareness and accountability. Performance of the work is designated to occur at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026, and the solicitation posted on August 9, 2026. The contract is structured as a subcontract under the NAICS code 541611, which covers management consulting services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. While specific point of contact details are not provided, the work will require close coordination with defense supply chain entities to uphold compliance standards in a high-regulation, mission-critical setting.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Cybersecurity Compliance & NIST 800-171 AssessmentThe contract requires the performance of NIST SP 800-171 cybersecurity assessments to ensure systems handling Covered Defense Information meet federal security requirements. The effort focuses on evaluating compliance with the specified framework, identifying gaps, and implementing necessary safeguards to protect sensitive data. All assessment outcomes must be documented and submitted through the Supplier Performance Risk System to validate adherence to contractual and regulatory obligations. The work is tied to a subcontract under the Department of Defense and is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, under the NAICS code 541512, indicating it pertains to computer systems design services. There is no set-aside designation specified, and the contract does not include a designated point of contact within the provided details.

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

Technical Data & Configuration Management SupportThe contract seeks configuration management support to maintain technical data integrity and ensure full alignment with engineering changes, Engineering Change Orders, and audit-ready documentation standards. This subcontract is aimed at providing expert oversight to manage documentation lifecycles, track revisions, and validate compliance with defense engineering protocols throughout the product development and sustainment phases. The work is critical to sustaining operational readiness and regulatory compliance within a high-stakes defense environment. Performance will be centered at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026, and the solicitation posted on August 9, 2026. The NAICS code 541611 indicates a focus on management and scientific technical consulting services. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the effort is part of a broader initiative to uphold rigorous technical documentation standards for defense systems. Interested parties must submit proposals through the DIBBS portal prior to the deadline.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks subcontractor services to perform First Article Testing, which includes dimensional inspection, material verification, and functional testing to ensure full compliance with design specifications. This work is critical for validating that initial production units meet all technical requirements before full-scale manufacturing proceeds. The testing must be carried out with precision and documented thoroughly to confirm conformance across all mandated parameters. The solicitation is issued under the NAICS code 541330 for engineering services and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance of the work is required at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026. The contract is classified as a subcontract, and while no set-aside type is specified, all bidders must meet the technical and procedural expectations outlined for first article validation in a defense supply context. Further details and submission instructions are accessible through the provided DIBBS link.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Precision Panel Assembly ManufacturingThe contract calls for the precise manufacture of defense-grade panel assemblies intended for aircraft elevator systems, requiring strict adherence to approved engineering drawings, engineering change orders, and configuration control standards to ensure full compliance with military specifications. All work must be executed under rigorous quality assurance protocols to meet the demanding reliability and safety requirements of aerospace defense applications. The product must be produced in full alignment with established technical documentation and validated through documented configuration management practices to maintain traceability and consistency throughout production. Performance of this subcontract is designated to occur at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026, and the solicitation was posted on August 9, 2026. The North American Industry Classification System code 332322 indicates the scope is tied to aircraft parts and supplies manufacturing, emphasizing specialized industrial capability. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, underscoring the national security relevance of the project. The subcontract is unstructured for set-aside status and requires proposers to demonstrate proven experience in high-integrity defense component fabrication, with no specific contact information provided in the solicitation.履约必须通过官方DIBBS平台进行。

Sheet Metal Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

Export Control and Compliance Advisory Services

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) Services

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Domestic and International Logistics / Freight Services

General Freight Trucking, Long-Distance, Truckload

POSTED

about 8 hours ago

DEADLINE