Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Wheel Half Assembly Manufacturing

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and delivery of aircraft wheel half assemblies that must fully comply with Department of Defense specifications including MIL-STD-1916 for sampling procedures and MIL-STD-129 for uniform marking of containers and items. The work is subject to CMMC Level 2 cybersecurity requirements, ensuring that the contractor implements adequate safeguards to protect controlled unclassified information throughout the production and delivery process. The NAICS code 336411 identifies this as an aerospace product and parts manufacturing activity, specifically focused on aircraft landing gear components. The contract is classified as a subcontract with a performance location in New Cumberland, Pennsylvania, 17070-5002, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on August 4, 2026, with a firm response deadline of August 12, 2026, and bidders must ensure full technical and regulatory alignment with all referenced military standards and cybersecurity protocols to be considered eligible. The work must meet stringent quality and documentation benchmarks consistent with DLA procurement practices.

General Info

Manufacture and deliver aircraft wheel halves per DoD specs, CMMC Level 2, in New Cumberland, PA, by August 12, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of aircraft wheel half assemblies compliant with DLA specifications, MIL-STD-1916 sampling, MIL-STD-129 marking, and CMMC Level 2 cybersecurity requirements.

Similar Contracts

Same NAICS industry code

LIGHT SET, GENERAL I

Solicitation # SPE8E7-26-T-3512

This contract, identified as SPE8E7-26-T-3512, is a total small business set-aside for the procurement of 62 units of LIGHT SET, GENERAL ILLUMINATION with NSN 6230-01-596-4722 and part number 31-ISL-BB, at a unit price of $62.00, totaling $3,844.00. Delivery is required FOB origin within 117 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must strictly adhere to DLA’s packaging requirements RP001 and MIL-STD-129 for labeling and marking, with commercial packaging compliant to ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case TQ requirement IP025 governs. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each, with quantity per unit pack specified as 001, and palletization must follow DLA guidelines. The contract mandates delivery to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with parcel post and freight shipping addresses identical. Transportation must comply with DLAD Proc Notes C19 and C20. The original required delivery date is March 17, 2027, but a need ship date of August 6, 2026, indicates an earlier anticipated shipment timeline. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under a Small Business Administration set-aside for NAICS code 336411. Primary point of contact is Kelly Mitchell, reachable via email and phone, and all contractual obligations must align with the applicable revision of the DLA Master List as of the solicitation issue date. The contract is issued under the DoD’s authorized unit of issue framework and includes provisions for the removal of government identification from non-accepted supplies, with covered defense information potentially applying.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

SOLENOID, ELECTRICAL

Solicitation # SPE7M5-26-T-368C

This contract specifies the procurement of one electrical solenoid, identified by NSN 5945-01-338-5435 and part number 61245 from Getinge USA Inc., with delivery required within 20 days FOB origin. The unit of issue is one each, with no variance allowed in quantity. All supplies must comply with DLA packaging requirements, including commercial packaging standards and protection against damage during transit. Each unit must be sealed in a suitable container and packed in exterior shipping containers that ensure safe delivery at the lowest transportation cost. Palletization is mandatory for shipments exceeding 250 pounds or 20 cubic feet, using Type IV or Type V 4-way entry pallets measuring 40 by 48 inches, with total load dimensions capped at 54 inches in height, 43 inches in length, and 52 inches in width. Exceptions apply for oversized items, requiring coordination with the contracting officer. The solenoid must be free from intentional addition of mercury or mercury-containing compounds, except in narrowly defined cases such as batteries, instruments, or weapons systems specified by NAVSEA, and portable devices containing mercury must have shockproof design and a secondary containment. Marking requirements follow Medical Marking Standard No. 1, superseding MIL-STD-129 for all medical acquisitions, and include NSN, government quantity, and unit of issue on each unit. Additional labeling must comply with IPC/JEDEC J-STD-609 for lead-free component identification. Passive RFID tags are required for shipments to DLA distribution locations, unless exempted by FSC codes 6505, 6508, 6509, or 6550. Wood packaging material must be heat-treated or kiln-dried per DOD requirements. Deliveries are directed to USS TRIPOLI LHA 7 in FPO AP, and the contract explicitly prohibits removal of government identification from non-accepted supplies. All technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.

ACTIVE DEVICES DIVISION

POSTED

about 11 hours ago

DEADLINE

LIGHT, HEAD, GENERAL

Solicitation # SPE8E7-26-T-3507

The contract specifies the procurement of 289 units of a headlight assembly designated by part number YUKON HL and NSN 6230015774782 under solicitation SPE8E7-26-T-3507, issued by the Defense Logistics Agency District San Joaquin. Delivery is required in 54 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must comply with DLA’s master technical and quality requirements, prioritizing those referenced by R or I numbers over ASTM D3951, and all items must be labeled and marked according to MIL-STD-129. Non-hazardous materials must be commercially packaged per SPE8E7-26-T-3507, while hazardous items must meet FED-STD-313 and TQ requirement IP025. Palletization follows RP001 packaging standards, and the unit of issue is each. The delivery address for both freight and parcel post is the same DLA receiving warehouse in Tracy, CA. The original required delivery date is October 27, 2026, with a need ship date of October 11, 2026. The contract references specific transportation procedures and designates Kelly Mitchell as the primary point of contact.

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

Unmanned Carrier-Based Aircraft Solutions Request for Information (RFI)

Solicitation # PAEA-UnmannedStratSS

The Naval Air Systems Command is seeking industry input through a Sources Sought notice for next-generation unmanned carrier-based aircraft to support the Naval Aviation Enterprise’s Air Wing of the Future strategy, aligned with the Golden Fleet initiative. The focus is on identifying capable industrial partners who can design, develop, prototype, manufacture, and field autonomous platforms optimized for deployment from Ford-class and Nimitz-class nuclear aircraft carriers. The desired solutions may include single-role, multi-role, or modular systems that integrate with existing Family of Systems such as the MQ-25A and Collaborative Combat Aircraft, with an emphasis on operational effectiveness, autonomy, and carrier compatibility. The government aims to use the information gathered to shape future requirements, investment priorities, and acquisition pathways for unmanned aviation capabilities. Responses must be submitted electronically by 5:00 PM EST on August 13, 2026, to the designated Navy mailbox with a copy to Contract Specialist Samantha Moore. Submissions are limited to ten pages using Times New Roman 12-point font and single spacing, with optional accompanying PowerPoint presentations not exceeding twenty slides and no video content. All information must remain unclassified. The solicitation, identified as PAEA-UnmannedStratSS, was posted on July 14, 2026, and is issued under NAICS code 336411. No set-aside provisions apply, and responses are welcome from all qualified industry entities. Point of contact for inquiries includes Samantha Moore and Jacob Leighton, with the office located at Naval Air Station Patuxent River, Maryland.

Naval Air Systems Command

POSTED

about 16 hours ago

DEADLINE

Solicitation # FA282326Q0062

This acquisition is a total small business set-aside under NAICS code 336411 with a 1,500-employee size standard, exclusively open to certified small business concerns. The Air Force Test Center at Eglin AFB, Florida, is seeking Drone Targets including 10 drones, two ground control stations with Mission Planner© software, two paired hand controllers, one launch interface, and two days of flight training conducted at the contractor’s facility, all aligned with the Technical Requirement Document dated 06 July 2026. The drones must feature gasoline propulsion with an electrical option, a Shahed-type flying wing airframe preferred, an Orange Cube Autopilot, RFD-900 radio, 2-hour flight time batteries (10 per tail), a charging system, and must undergo flight testing prior to delivery. The ground control stations require antennas/masts supporting a 15 km range. All items must be delivered within 45 calendar days after award receipt, with FOB Destination shipping terms, and must comply with UID requirements per MIL-STD-130 and MIL-STD-129, using two-dimensional data matrix symbology compliant with ISO/IEC 16022 and verified using automatic identification technology. Offers must be in English, denominated in U.S. dollars, and submitted via email to Kristina Brannon by 12:00 PM CDT on 12 August 2026. Questions must be submitted by 12:00 PM CDT on 7 August 2026, with responses posted weekly. The award will be made on a lowest price technically acceptable basis, evaluating technical acceptability as a pass/fail criterion based on compliance with the technical document and SPRS performance ratings, which must be Blue, Purple, Green, White, Black, or Green (Scorable Data Pending). Offerors must be registered in SAM with an active UEI and CAGE code, and registered in WAWF to receive electronic payments. Pricing must be firm for 60 days from the offer deadline, and no advanced payments will be made. The contract type is a firm-fixed priced purchase order under FAR Part 12, with deviations from Parts 12, 19, and 25 implemented under Department of War-issued Class Deviations. Compliance with DFARS clauses on unique item identification, prohibited telecommunications equipment, combating trafficking in persons, and Buy American provisions is required

FA2823 Aftc Pzio

POSTED

about 16 hours ago

DEADLINE

Aircraft Component Manufacturing – Former, P/N: 35-8226-507The contract pertains to the manufacture and delivery of ten units of a precision aerospace structural component known as the Former, with part number 35-8226-507, designed to meet stringent military specifications and packaging standards. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026, indicating a limited window for qualified suppliers to submit proposals. The North American Industry Classification System code 336411 identifies this as a transaction within the Aerospace Product and Parts Manufacturing sector, emphasizing the technical expertise and regulatory compliance necessary for participation. All delivered units must adhere to exacting quality and documentation protocols to ensure integration and operational reliability within defense systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-12QJ

The contract pertains to the procurement of a covered access item identified by NSN 5340-01-118-1950 and part number 70400-21621-045, with a quantity of six units, under solicitation SPE4A6-26-T-12QJ. The item must comply with mandatory cybersecurity requirements under CMMC Level 2 Self-Assessment and adhere to detailed technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, including physical identification, supply chain traceability documentation retention per DLAD Procurement Note C03, and packaging standards per MIL-STD-129 and ASTM D3951 if non-hazardous, with prioritized precedence given to DLA requirements. Item Unique Identification is not required per customer request, and sampling must follow Sikorsky Corporation’s approved alternate plan QAP 1201, consistent with ASQ H1331 or MIL-STD-1916. Delivery is FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at destination, and the item must be packaged and palletized strictly per DLA packaging requirements RP001. The delivery window is 171 days from the award date, with an original required delivery date of April 24, 2027, and a needed ship date of January 31, 2027. The item must be shipped to DLA Distribution San Diego at the specified FOB address, with transportation governed by DLAD Procurement Notes C19 and C20. The contract falls under NAICS code 336411 and is issued by the Department of Defense’s ASC Commodities Division, with primary point of contact Tammy Ballard.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-8870

The contract solicitation SPE7LX-26-U-8870 seeks the supply of 34 gaskets identified by NSN 5330-01-459-0974 and part number 6K404 under a Total Small Business Set-Aside, with NAICS code 336411 and a contract value ceiling of $350,000. Delivery is required within 97 days after award, with FOB Origin terms and destination inspection and acceptance governed by FAR 52.246-2. The item is classified as a commercial item and must be asbestos-free, with any alternative materials requiring prior approval under Clause L30 and Provision 4. Packaging must conform to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV degradation, in compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking. Identification of the item must adhere to MIL-STD-130N, including Unique Item Identification with Data Matrix barcodes. The contract mandates compliance with CMMC Level 2 for cybersecurity, safeguarding covered defense information under DFARS 252.204-7012, and prohibits acquisition of covered defense telecommunications equipment per DFARS 252.204-7018. Contractors must submit electronic invoices via WAWF and provide a Certificate of Conformance prior to shipment. The requirement for a DLA Packaging Compliance Statement and the removal of government identification from non-accepted supplies further govern handling and documentation. The solicitation applies revisions from the DLA Master List of Technical and Quality Requirements, with technical compliance being essential for award under a Lowest Price Technically Acceptable methodology. All offerors must certify socioeconomic status as a small business and declare any joint ventures, providing UEI and CAGE codes where applicable. Provisions for employment eligibility, combating human trafficking, equal opportunity for workers with disabilities, and whistleblower protections are incorporated, along with restrictions on compensation of former DoD officials and compliance with hazardous material handling standards under DFARS 252.223-7006 and 252.223-7001. No attachments are listed, and detailed delivery locations or pricing are subject to the Schedule.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

ADAPTER, TAIL ROTOR

Solicitation # SPE4A5-26-T-330C

The contract is for the procurement of an Adapter, Tail Rotor with NSN 1615-00-125-4120 and part number 206-040-328-003 from Bell Textron Inc, requiring eight units to be delivered within five days FOB origin. Manufacturing may involve casting or forging, and the government does not necessarily possess the required tooling, necessitating vendors to seek assistance through DLA’s Casting and Forging Assistance Request portal if needed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size. The item is classified as a critical application, and cybersecurity compliance requires a CMMC Level 2 Self-Assessment. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Unit identification is not mandated per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Inspection and acceptance occur at origin, with sampling following MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified. Attributes are assigned verification levels or AQLs as critical, major, or minor, with unspecified features treated as major. Palletization adheres to DLA packaging standards. The delivery destination is in Bogotá, Colombia, with Freight Forwarder Forward Systems Group handling logistics, and the contract is under solicitation SPE4A5-26-T-330C with a response deadline of August 12, 2026, and an original required delivery date of October 31, 2024.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9253

The contract is for the procurement of 2,356 gaskets identified by NSN 5330-01-472-4538 under an indefinite-delivery contract (IDC) with a maximum value of $350,000, issued as solicitation SPE7LX-26-U-9253 by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required 116 days after order placement (ADO), with FOB Destination as the shipping term, and acceptance occurs at the final delivery point. Items must comply with military packaging standards MIL-STD-2073-1E and MIL-DTL-117 Type II, Class C, Style 1, specifically requiring medium duty, waterproof, greaseproof, opaque packaging for UV-sensitive items in Federal Supply Classes 5330/5331, applicable to direct vendor delivery, foreign military sales, and stock shipments. All hardware must conform to the current revision of the applicable military or consensus standard, and asbestos is strictly prohibited. Packaging, marking, and barcoding must adhere to MIL-STD-129, including GS1 DataBar and Code 128 formats, with no special marking codes required. Hazardous materials must comply with 29 CFR 1910.1200, with labels submitted for approval prior to award, and any radioactive materials exceeding specified activity levels must be clearly labeled per MIL-STD-129. Mercury and ozone-depleting chemicals are prohibited except for limited approved uses, and configuration changes must follow SAE AS1895F and SAE AS1895/7J. Safety Data Sheets must be provided before award, and any material changes require immediate notification. The contract incorporates cybersecurity requirements via NIST SP 800-171 DOD Assessment and Safeguarding Covered Defense Information (252.204-7012), with deviation 2026-00038 applying to multiple clauses including those on combating trafficking, employment eligibility verification, sustainable products, and hazardous material identification. All offerors must provide a Unique Entity Identifier and CAGE code, declare small business status if applicable, and affirm compliance with workforce and ethical standards through mandatory representations. Performance is governed by FAR and DFARS clauses, including destination inspection under FAR 52.246-2, accelerated payments to small business subcontractors, and

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SCREW, EXTERNALLY RELIE

Solicitation # SPE4A6-26-T-11ZH

The contract specifies the procurement of 94 screws with an externally relieved body, identified by NSN 5305-01-296-2846, under solicitation SPE4A6-26-T-11ZH, with a delivery deadline of 171 days from order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with the revision in effect at the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have government identification removed prior to return. Sampling and inspection procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major unless otherwise stated. The item includes technical data subject to export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and approval by DLA to handle such data. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division, with performance located in New Cumberland, PA, and all technical requirements are accessible through the DLA eProcurement portal.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FLANGE ASSEMBLY, BRA

Solicitation # SPE4A7-26-T-616Q

The contract pertains to the procurement of a flange assembly for brake systems, identified by part number 4740228 and NSN 1615-01-202-7126, with a quantity of 41 units to be delivered FOB origin within 131 days of contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with configuration control, inspection, and acceptance procedures strictly defined, including adherence to RQ009 for origin inspection and RQ011 for removal of government identification from non-accepted items. Quality assurance follows non-tailored ISO 9001:2015 standards, and sampling must conform to MIL-STD-1916 or equivalent zero-based plans, with unspecified attributes treated as major and acceptance criteria requiring zero non-conformances unless otherwise stipulated. The item is designated a critical application component, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Packaging must comply with MIL-STD-2073-1E and DLA packaging directives, including marking per MIL-STD-129 and palletization per RP001. Technical data is proprietary and insufficient for competitive procurement, with no approved technical data package currently available. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 22, 2026, and an original delivery deadline of February 24, 2027. The unit price is $41.00 per unit, totaling $1,681.00, and the contract is administered under solicitation SPE4A7-26-T-616Q by the Department of Defense, with Amber Wells as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Precision Machined Component Supply – Ball Screw Actuator CapThe contract calls for the supply of 15 precision-machined Ball Screw Actuator Caps identified by NSN 1620002444628, manufactured to meet military specifications and compliant with MIL-STD-129 marking standards and hazardous material labeling regulations. Each unit must be produced to exacting technical and quality benchmarks ensuring full compatibility and operational reliability in defense systems. The procurement is structured as a subcontract under NAICS code 332721 and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Proposals must be submitted by August 13, 2026, with the performance location designated as Hill Air Force Base, Utah, 84056-5734. The solicitation was posted on August 5, 2026, and bidders must adhere to all technical, logistical, and compliance requirements outlined in the defense procurement framework.

Precision Turned Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Support)The contract seeks support for achieving Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance, focusing on the implementation of NIST SP 800-171 security controls, defining the system boundary, and developing a robust incident response plan. This effort is essential for organizations handling controlled unclassified information and requires a structured approach to assess and strengthen cybersecurity posture in alignment with federal standards. The scope involves practical execution and documentation to meet CMMC requirements, ensuring the system can demonstrate readiness for third-party evaluation. This is a subcontract under a Total Small Business Set-Aside, meaning only small business concerns can bid, as defined by the SBA. It is classified under NAICS code 541512, indicating it pertains to custom computer programming services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Bidders must respond by August 13, 2026, with the solicitation posted on August 5, 2026, and further details available through the DIBBS system.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Marking, and Shipment to DLAThis contract requires full compliance with ASTM D3951 and MIL-STD-129 standards for the packaging, preservation, containerization, labeling, and shipment of materials to DLA New Cumberland. All operations must adhere to strict military and industry specifications to ensure product integrity during transport and storage, with particular emphasis on proper marking and documentation to support logistics and receipt verification at the designated delivery point. The packaging and labeling must be accurate, durable, and standardized to facilitate seamless processing upon arrival at the DLA facility in New Cumberland, Pennsylvania. The solicitation is structured as a small business set-aside under the SBA program, exclusively available to total small businesses as defined by FAR 19.5, and falls under NAICS code 484220 for truck transportation. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, and is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Bidders must be prepared to coordinate directly with DLA New Cumberland for timely shipment and must demonstrate capability to meet all packaging and shipment requirements without deviation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract is for the preparation and submission of Safety Data Sheets and hazard warning labels that must fully comply with OSHA’s Hazard Communication Standard and Federal Standard No. 313, ensuring accurate and legally required hazard communication for hazardous materials. The work falls under a small business set-aside classified as a Total Small Business Set-Aside under FAR 19.5, and the North American Industry Classification System code is 541690, indicating it pertains to other scientific and technical consulting services. Performance of the contract is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 13, 2026, indicating a short turnaround window for interested vendors to submit their proposals. The contract type is a subcontract, meaning the awardee will be working under a prime contractor or as part of a larger procurement structure. The work is critical to maintaining regulatory compliance for hazardous materials handled by the Department of Defense and requires precise adherence to federal safety standards, with no margin for error in labeling or documentation. All deliverables must meet the strict technical and formatting requirements of HAZCOM to ensure safe handling, storage, and transport of hazardous substances within defense operations.

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

Item Unique Identification (IUID) Marking ServicesThe contract calls for permanent Item Unique Identification (IUID) marking of components in full compliance with MIL-STD-130 standards, requiring the application of data matrix barcodes that are durable, legible, and resistant to environmental degradation. The marking process must ensure material compatibility across diverse component substrates while maintaining precise dimensional accuracy and contrast for reliable machine readability throughout the item’s lifecycle. Verification protocols are mandatory to confirm that each mark meets exacting standards for scannability, permanence, and resistance to corrosion, abrasion, and chemical exposure under operational conditions. This is a small business set-aside subcontract under NAICS code 541330, managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is open for responses until August 13, 2026, and is intended to support defense logistics by ensuring full traceability of end-item components through a universally recognized, government-mandated identification system. All submitted bids must demonstrate proven capability in executing IUID marking with documented compliance, quality control, and adherence to military specification requirements.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Manufacture of Dual Breakaway, Auxiliary Component (P/N 21901-939)The contract calls for the precision manufacturing of a dual breakaway, auxiliary mechanical component designated as P/N 21901-939, to meet rigorous military specifications governing material durability, dimensional accuracy, and functional reliability under operational stress. The component must be produced with strict adherence to performance standards ensuring seamless integration and consistent performance in demanding environments, with all manufacturing processes subject to quality control protocols aligned with defense sector requirements. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with delivery timelines tied to the solicitation’s response deadline of August 13, 2026. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 332996 identifying the industry as Other Miscellaneous Fabricated Metal Product Manufacturing. The contract is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and was posted on August 5, 2026, inviting qualified small businesses to respond within the eight-day window. Participation is restricted to entities eligible under the Small Business Set-Aside program, and all proposals must demonstrate capability to meet the technical and logistical demands of military-grade fabrication without reliance on non-small business subcontractors.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing of a Critical Application Spacer Plate (NSN 5365004030349)The contract requires the complete manufacturing, finishing, inspection, packaging, and delivery of 101 units of a critical application Spacer Plate identified by NSN 5365004030349, all to meet stringent military specifications. The work must adhere to exacting standards for material composition, surface plating, and quality control procedures to ensure the components are fit for high-stakes military use. All deliverables must be fully compliant with defense requirements, including rigorous documentation and traceability throughout the production lifecycle. The contract is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker AFB, Oklahoma, 73145-8000. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The North American Industry Classification System code is 332510, indicating the focus is on forging and stamping operations. The contract is not subject to a specific set-aside designation, and all work must be completed and delivered within the specified timeline to meet operational readiness demands.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) and Government Testing SupportThe contract requires comprehensive engineering and technical support for First Article Testing (FAT) to ensure compliance with government standards and procedures outlined under FAR 52.209-4. This includes developing detailed test plans, preparing and managing all associated documentation, and coordinating directly with government representatives to facilitate timely and accurate evaluation of first articles. The work demands a high level of technical expertise and attention to regulatory requirements, with the goal of validating conformance before full-scale production begins. This is a small business set-aside subcontract under NAICS code 541330, designated for total small business participation as defined by SBA regulations. Performance is required at Robins Air Force Base, Georgia, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. The contracting entity operates under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the work will involve close collaboration with federal personnel to meet stringent quality and compliance objectives for defense-related systems.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Specialized Materials Supply for Aerospace PanelThe contract entails the supply of high-performance aerospace-grade raw materials, including aluminum alloys and advanced composites, strictly adhering to the technical specifications outlined in TDP Rev A Gen 1, with rigorous requirements for full material traceability and compliance with military packaging standards. These materials are critical for the fabrication of aerospace panels and must meet exacting quality and reliability benchmarks necessary for defense applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 331314 designates this as a nonferrous metal rolling, drawing, and extruding operation. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 13, 2026, and performance is to be carried out at Robins Air Force Base, Georgia, with a zip code of 31098-1887. While no specific point of contact or agency office address is provided beyond the overarching Department of Defense affiliation, the contracting activity falls under the ASC SUPPLIER OPER AE AND AF DIV. The contract’s operational context implies direct support to defense systems requiring certified materials with proven durability under extreme conditions, and all shipments must comply fully with military-grade packaging and documentation protocols to ensure integrity throughout the supply chain.

Secondary Smelting and Alloying of Aluminum

POSTED

about 11 hours ago

DEADLINE

Precision Fabrication of Structural Panel (AI)The contract calls for the manufacture of a precision structural panel in strict accordance with military drawings such as 4F75981-107A and the associated Technical Data Package Rev A Gen 1, encompassing all required machining, forming, and assembly processes to meet stringent aerospace specifications. The work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and functional performance critical to defense aerospace applications. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 332321, reserved exclusively for small businesses as defined by federal regulations. The performance location is designated as Robins AFB, Georgia, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and all work must be completed within the provided technical and regulatory framework to ensure compliance and delivery readiness.

Metal Window and Door Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Machined Component Supply – End Plate (NSN 6605006334227)Five precision-engineered end plates, identified by NSN 6605006334227, are to be manufactured and delivered in strict accordance with the military technical data package TDP Rev A Gen 1, ensuring full compliance with MIL-STD-129 for labeling and MIL-STD-1916 for statistical process control. The components must be produced under the NAICS code 332721 and delivered to Tinker AFB, Oklahoma, with a final delivery deadline aligned with the contract’s response deadline of August 13, 2026. This subcontract opportunity, issued under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, requires adherence to all technical, quality, and documentation standards mandated by federal military specifications, with no set-aside designation applies. All submissions must be completed through the DIBBS portal by the stated deadline to be considered.

Precision Turned Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Corrosion Preventive Anodes (Sacrificial Anodes) SupplyA subcontract has been issued for the supply of 22 units of sacrificial anodes designed for corrosion prevention in critical defense applications, meeting rigorous military specifications to ensure reliability in harsh operational environments. These anodes are intended for integration into cathodic protection systems on military equipment and infrastructure, where long-term durability and performance under extreme conditions are essential. The contract was posted on August 5, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 332722 for metal forging and stamping. Performance is required at Portsmouth, with the overseeing agency being the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, indicating the procurement supports defense maintenance and readiness efforts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE